Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Journal of the Optical Society of America B

Realization of a single-beam, detachable, cascaded 2D magneto-optical trap based modular cesium source

J.Y. Yang, Kaiyue Wang, Sachin Barthwal, Colin Parker

Published Jul 9, 2024• 0 citations
Publisher

Abstract

We present a detachable, cascaded modular cesium loading source based on a 2D magneto-optical trap (MOT). Our design utilizes only a single beam of mixed cooling and repumping light that is split evenly into five discrete trapping regions, each with horizontal and vertical beams. The pre-aligned, single-beam design makes our module suitable for miniaturization. The generated cold atomic beam serves to load a 3D MOT, whose loading rate we use to characterize the efficiency of our design. The effect of individual trapping regions relative to the differential tube and to each other on the loading rate has also been examined. Experimental results were compared with a numerical simulation. We are able to obtain an experimental loading rate of nearly 8×10 7 atoms/s and a vapor density of about 3×10 15 atoms/m 3 in our 2D MOT module.

DOI
10.1364/josab.522695

Related papers

A cold cesium beam source based on a two-dimensional magneto-optical trap

Weibin Xie, Qing Wang, Xuan He +4 more

A beam source is proposed for the production of an intense cold cesium atomic beam that can be used in cesium beam atomic clocks. The source is based on a two-dimensional magneto-optical trap (2D-MOT), but introduces hollow cooling and pushing lights in the axial direction to create a 2D+-MOT, which separates the cooling and pushing functions while the low-power pushing light pushes atoms out to form a cold atomic beam. This cold cesium atomic beam source reduces the light shift due to leakage light and retains longitudinal cooling to increase the flux of the cold atomic beam compared with that of the conventional 2D+-MOT scheme. The specifics of the design are investigated, the atomic velocity and beam flux are calculated, and the results are experimentally verified. The results demonstrate that when the power of the pushing light is 180 µW and when its frequency resonates with the 4 → 5′ transition of the Cs D2 line, the most probable longitudinal velocity of the outgoing cold atomic beam, the width of velocity distribution, and the atomic beam flux are 19.38 m/s, 8.1 m/s, and 1.7 × 1010 atoms/s, respectively.

AIP Advances•Jul 1, 2022•4 citations

A novel simplified two-dimensional magneto-optical trap as an intense source of slow cesium atoms

N. Castagna, Jocelyne Guéna, Mark D. Plimmer +1 more

We describe the design and performance of a slow atom source based on a 2D magneto-optical trap (MOT) that uses an innovative simple optical configuration. Metal-coated retro-reflecting prisms replace mirrors and quarter-wave plates so the optical power of the cooling laser beam is recycled. This source has been characterised for three different configurations: with and without transverse magnetic field gradient, and with a pusher beam to obtain a 2D+-MOT. The longitudinal velocity is of the order of 25 m·s−1, with a transverse velocity spread ≤1 m·s−1, while the typical atomic flux density obtained is up to 1.3×1014 at ·s−1·m−2 for a cesium vapour pressure of ~4×10−8 mbar in the source. We use this slow atom beam, instead of cesium vapour, to load a 3D moving optical molasses that feeds a continuous cold atom fountain. We obtain a gain of a factor ~20 in the atomic flux launched by the fountain.

The European Physical Journal Applied Physics•Apr 1, 2006•26 citations

Intense source of cold cesium atoms based on a two-dimensional magneto–optical trap with independent axial cooling and pushing

黄家强, 颜学术, 吴晨菲 +2 more

We report our studies on an intense source of cold cesium atoms based on a two-dimensional(2D) magneto–optical trap(MOT) with independent axial cooling and pushing.The new-designed source,proposed as 2D-HP MOT,uses hollow laser beams for axial cooling and a thin pushing laser beam to extract a cold atomic beam.With the independent pushing beam,the atomic flux can be substantially optimized.The total atomic flux maximum obtained in the 2D-HP MOT is4.02 × 1010atoms/s,increased by 60 percent compared to the traditional 2D+MOT in our experiment.Moreover,with the pushing power 10 μW and detuning 0Γ,the 2D-HP MOT can generate a rather intense atomic beam with the concomitant light shift suppressed by a factor of 20.The axial velocity distribution of the cold cesium beams centers at 6.8 m/s with an FMHW of about 2.8 m/s.The dependences of the atomic flux on the pushing power and detuning are studied in detail.The experimental results are in good agreement with the theoretical model.

中国物理B:英文版•Jan 1, 2016•0 citations

A Simplified Cold Atom Source for 3-D MOT Loading

Xiaolong Wang, Bing Cheng, Bin Wu +2 more

A simplified two-dimensional (2-D) magneto-optical trap (MOT) for loading atoms into a 3-D MOT is realized. Instead of utilizing multiple wave plates and beam splitters to cover a large cooling region, we deploy cooling beams with elliptical cross-section profiles to achieve a comparable cooling volume. This simplification reduces the cost and difficulty of alignment. The 3-D MOT achieves a loading rate of 2 × 10 8 atoms per second via this simplified 2-D MOT. Correlation between the loading rate and parameters of optical system is also determined.

Chinese Physics Letters•May 1, 2011•10 citations

Realization of the Compact Magneto-Optical Trap Based on Single Laser with Frequency Modulation

Shuning Bao, Bin Wu, Pengfei Cao +9 more

In cold atom physics, the complexity of traditional magneto-optical trap system limits the use of their associated instruments for field applications in atomic physics, such as gravity mapping, space navigation and deep space exploration. This study introduces a novel compact MOT design that addresses these issues by simplifying the structure and reducing the size. The height of the unit is 0.7 m, the volume is 6.3×10−2m3 and the mass is 11.32 kg. The new design utilizes a single laser to generate the two different frequencies needed for laser cooling by internally splitting the beam, shifting the frequency and then combining them, effectively controlling both the cooling and repumping beams. The compact vacuum chamber optical path, in conjunction with the magnetic field, facilitates the capture of 87Rb atoms in an ultra-high vacuum environment. Experimental results demonstrate an atom loading rate of up to 1.79×10787Rb atoms per second, confirming the system’s effectiveness in capturing and cooling 87Rb atoms. This design provides a flexible and portable solution, offering valuable insights for the advancement of compact MOT and its applications in cold atom physics.

Photonics•Jan 23, 2025•0 citations

Compact high-flux cold cesium beam source based on a modified two-dimensional magneto-optical trap

Jiancheng Fang, Lu Qi, Yuchi Zhang +4 more

We present a compact cold cesium beam source based on a two-dimensional plus magneto-optical trap with a hollow retarding light. The loss mechanism of the atom beam at the entrance of the pumping hole of the differential tube, which was neglected in previous similar configurations, is minimized in the configuration due to modification, resulting in higher pass efficiency for cold atoms. An atom beam flux of up to 2.5×1010 atoms/s is observed with a shorter transverse cooling length, which agrees with the numerical simulation qualitatively. The compact volume and high laser efficiency make it an ideal beam source for practical use.

Journal of the Optical Society of America B•Apr 20, 2015•7 citations
We present a detachable, cascaded modular cesium loading source based on a 2D magneto-optical trap (MOT). Our design utilizes only a single beam of mixed cooling and repumping light that is split evenly into five discrete trapping regions, each with horizontal and vertical beams. The pre-aligned, single-beam design makes our module suitable for miniaturization. The generated cold atomic beam serves to load a 3D MOT, whose loading rate we use to characterize the efficiency of our design. The effect of individual trapping regions relative to the differential tube and to each other on the loading rate has also been examined. Experimental results were compared with a numerical simulation. We are able to obtain an experimental loading rate of nearly 8×10 7 atoms/s and a vapor density of about 3×10 15 atoms/m 3 in our 2D MOT module.
A beam source is proposed for the production of an intense cold cesium atomic beam that can be used in cesium beam atomic clocks. The source is based on a two-dimensional magneto-optical trap (2D-MOT), but introduces hollow cooling and pushing lights in the axial direction to create a 2D+-MOT, which separates the cooling and pushing functions while the low-power pushing light pushes atoms out to form a cold atomic beam. This cold cesium atomic beam source reduces the light shift due to leakage light and retains longitudinal cooling to increase the flux of the cold atomic beam compared with that of the conventional 2D+-MOT scheme. The specifics of the design are investigated, the atomic velocity and beam flux are calculated, and the results are experimentally verified. The results demonstrate that when the power of the pushing light is 180 µW and when its frequency resonates with the 4 → 5′ transition of the Cs D2 line, the most probable longitudinal velocity of the outgoing cold atomic beam, the width of velocity distribution, and the atomic beam flux are 19.38 m/s, 8.1 m/s, and 1.7 × 1010 atoms/s, respectively.
We describe the design and performance of a slow atom source based on a 2D magneto-optical trap (MOT) that uses an innovative simple optical configuration. Metal-coated retro-reflecting prisms replace mirrors and quarter-wave plates so the optical power of the cooling laser beam is recycled. This source has been characterised for three different configurations: with and without transverse magnetic field gradient, and with a pusher beam to obtain a 2D+-MOT. The longitudinal velocity is of the order of 25 m·s−1, with a transverse velocity spread ≤1 m·s−1, while the typical atomic flux density obtained is up to 1.3×1014 at ·s−1·m−2 for a cesium vapour pressure of ~4×10−8 mbar in the source. We use this slow atom beam, instead of cesium vapour, to load a 3D moving optical molasses that feeds a continuous cold atom fountain. We obtain a gain of a factor ~20 in the atomic flux launched by the fountain.
We report our studies on an intense source of cold cesium atoms based on a two-dimensional(2D) magneto–optical trap(MOT) with independent axial cooling and pushing.The new-designed source,proposed as 2D-HP MOT,uses hollow laser beams for axial cooling and a thin pushing laser beam to extract a cold atomic beam.With the independent pushing beam,the atomic flux can be substantially optimized.The total atomic flux maximum obtained in the 2D-HP MOT is4.02 × 1010atoms/s,increased by 60 percent compared to the traditional 2D+MOT in our experiment.Moreover,with the pushing power 10 μW and detuning 0Γ,the 2D-HP MOT can generate a rather intense atomic beam with the concomitant light shift suppressed by a factor of 20.The axial velocity distribution of the cold cesium beams centers at 6.8 m/s with an FMHW of about 2.8 m/s.The dependences of the atomic flux on the pushing power and detuning are studied in detail.The experimental results are in good agreement with the theoretical model.
A simplified two-dimensional (2-D) magneto-optical trap (MOT) for loading atoms into a 3-D MOT is realized. Instead of utilizing multiple wave plates and beam splitters to cover a large cooling region, we deploy cooling beams with elliptical cross-section profiles to achieve a comparable cooling volume. This simplification reduces the cost and difficulty of alignment. The 3-D MOT achieves a loading rate of 2 × 10 8 atoms per second via this simplified 2-D MOT. Correlation between the loading rate and parameters of optical system is also determined.
In cold atom physics, the complexity of traditional magneto-optical trap system limits the use of their associated instruments for field applications in atomic physics, such as gravity mapping, space navigation and deep space exploration. This study introduces a novel compact MOT design that addresses these issues by simplifying the structure and reducing the size. The height of the unit is 0.7 m, the volume is 6.3×10−2m3 and the mass is 11.32 kg. The new design utilizes a single laser to generate the two different frequencies needed for laser cooling by internally splitting the beam, shifting the frequency and then combining them, effectively controlling both the cooling and repumping beams. The compact vacuum chamber optical path, in conjunction with the magnetic field, facilitates the capture of 87Rb atoms in an ultra-high vacuum environment. Experimental results demonstrate an atom loading rate of up to 1.79×10787Rb atoms per second, confirming the system’s effectiveness in capturing and cooling 87Rb atoms. This design provides a flexible and portable solution, offering valuable insights for the advancement of compact MOT and its applications in cold atom physics.
We present a compact cold cesium beam source based on a two-dimensional plus magneto-optical trap with a hollow retarding light. The loss mechanism of the atom beam at the entrance of the pumping hole of the differential tube, which was neglected in previous similar configurations, is minimized in the configuration due to modification, resulting in higher pass efficiency for cold atoms. An atom beam flux of up to 2.5×1010 atoms/s is observed with a shorter transverse cooling length, which agrees with the numerical simulation qualitatively. The compact volume and high laser efficiency make it an ideal beam source for practical use.