Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

International Journal of Infrared and Millimeter Waves

First results of a 36 GHz SIS receiver

Denis Cr�t�, J. C. Pernot, Christine Letrou, P. Encrenaz

Published Jul 1, 1984• 0 citations
Publisher
DOI
10.1007/bf01009585

Related papers

Fabrication Process SIS Junctions for 40 GHz SIS Receiver

Akira Sakamoto, Takehiro Noguchi

•Jan 1, 1996•0 citations

Development of a 600- to 700-GHz SIS Receiver

William R. McGrath, Karl Jacobs, J. A. Stern +3 more

Softwaretechnik-Trends•Jan 1, 1990•5 citations

Waveguide-type all-NbN SIS mixers on MgO substrates

Masanori Takeda, Yoshinori Uzawa, Akira Kawakami +2 more

We present the first experimental results on waveguide-type all-NbN SIS receivers fabricated on MgO substrates designed in a frequency range from 780 to 960 GHz. The receiver has a resonant distributed SIS junction one wavelength long at 870 GHz as the tuning circuit and a diagonal feed horn. The mixer chip was fabricated with accuracies of less than 10 im in width and +/5 jam in thickness by optimizing the cutting and polishing conditions for MgO substrates and was successfully mounted in a waveguide-mixer block. Using a conventional Y-factor method for receiver noise measurement, a minimum DSB receiver noise temperature of 700 K was obtained at an LO frequency of 770 GHz. The contribution to noise made by the input system was dominant in receiver noise and the input noise temperature was more than 300 K over the measured band.

Softwaretechnik-Trends•Jan 1, 2004•1 citation

Dual‐frequency (40/100 GHz) SIS receiver for nobeyama millimeter‐wave array

Masayuki Yamamoto, K. Yamaji, Keiichi WATAZAWA +3 more

Abstract The authors developed a dual‐frequency (40/100 GHz) SIS receiver with SIS quasi‐particle tunneling junction element as the mixer, for use in the millimeter‐wave array at Nobeyama Radio Observatory, National Astronomical Observatory. The SIS element used is an array composed of four series‐connected Nb/Al‐AlOx/Nb junctions. The receiver is refrigerated to 4.3 K by a closed‐cycle He refrigerator. The receiver realized a very low receiver noise temperature for a wideband, such as 50 to 80 K for 43 to 49 GHz, and 60 to 100 K for 86 to 115 GHz. A wide dynamic range is also realized. At 40 Ghz, the saturation noise temperature is 2000 to 3000 K, compared with the wideband noise. These results indicate that the SIS array element can effectively improve the mixer saturation level without degrading the receiver performance.

Electronics and Communications in Japan (Part II Electronics)•Jan 1, 1989•1 citation

205 GHz SIS Receiver Development

William R. McGrath, C. N. Byrom, B. N. Ellison +4 more

Astrophysics and space science library•Jan 1, 1990•1 citation

Quasi-optical submillimeter-wave SIS mixers with NbN/A1N/NbN tunnel junctions

Yoshinori Uzawa, Zhen Wang, Akira Kawakami

We report on low-noise heterodyne mixing with NbN/A1N/NbN tunnel junctions in the submillimeter-wave region for the first time. The receiver consists of the quasi-optical NbN SIS mixer with an integrated tuning circuit in which a radial short stub tuner is incorporated to resonate out the junction capacitance for RF matching and a balanced IF circuit for broadband IF matching. The prepared NbN SIS junction has a current density of 20 kA/cm 2 and is about 1 I1111 in diameter, supplying a small coC JRN product (o)CJRN = 3 at 300 GHz). The junctions showed good dc I-V characteristics, excellent submillimeter-wave responses and sensitive heterodyne mixing responses. From 254 to 350 GHz the average receiver noise temperature measured using by the standard Y-factor method was about 250 K (DSB) at 5 K. The lowest receiver noise temperature, 200 K (DSB), was obtained at around 303 GHz. Comparing NbN/A1N/NbN and Nb/A10x/Nb tunnel junction performance with the same tuning circuit showed that the frequency dependence of the receiver noise temperature agreed well in the two receivers. These results suggest that our well-controlled NbN SIS junctions can be used for terahertz mixer elements instead of Nb SIS junctions.

•Mar 1, 1996•2 citations
We present the first experimental results on waveguide-type all-NbN SIS receivers fabricated on MgO substrates designed in a frequency range from 780 to 960 GHz. The receiver has a resonant distributed SIS junction one wavelength long at 870 GHz as the tuning circuit and a diagonal feed horn. The mixer chip was fabricated with accuracies of less than 10 im in width and +/5 jam in thickness by optimizing the cutting and polishing conditions for MgO substrates and was successfully mounted in a waveguide-mixer block. Using a conventional Y-factor method for receiver noise measurement, a minimum DSB receiver noise temperature of 700 K was obtained at an LO frequency of 770 GHz. The contribution to noise made by the input system was dominant in receiver noise and the input noise temperature was more than 300 K over the measured band.
Abstract The authors developed a dual‐frequency (40/100 GHz) SIS receiver with SIS quasi‐particle tunneling junction element as the mixer, for use in the millimeter‐wave array at Nobeyama Radio Observatory, National Astronomical Observatory. The SIS element used is an array composed of four series‐connected Nb/Al‐AlOx/Nb junctions. The receiver is refrigerated to 4.3 K by a closed‐cycle He refrigerator. The receiver realized a very low receiver noise temperature for a wideband, such as 50 to 80 K for 43 to 49 GHz, and 60 to 100 K for 86 to 115 GHz. A wide dynamic range is also realized. At 40 Ghz, the saturation noise temperature is 2000 to 3000 K, compared with the wideband noise. These results indicate that the SIS array element can effectively improve the mixer saturation level without degrading the receiver performance.
We report on low-noise heterodyne mixing with NbN/A1N/NbN tunnel junctions in the submillimeter-wave region for the first time. The receiver consists of the quasi-optical NbN SIS mixer with an integrated tuning circuit in which a radial short stub tuner is incorporated to resonate out the junction capacitance for RF matching and a balanced IF circuit for broadband IF matching. The prepared NbN SIS junction has a current density of 20 kA/cm 2 and is about 1 I1111 in diameter, supplying a small coC JRN product (o)CJRN = 3 at 300 GHz). The junctions showed good dc I-V characteristics, excellent submillimeter-wave responses and sensitive heterodyne mixing responses. From 254 to 350 GHz the average receiver noise temperature measured using by the standard Y-factor method was about 250 K (DSB) at 5 K. The lowest receiver noise temperature, 200 K (DSB), was obtained at around 303 GHz. Comparing NbN/A1N/NbN and Nb/A10x/Nb tunnel junction performance with the same tuning circuit showed that the frequency dependence of the receiver noise temperature agreed well in the two receivers. These results suggest that our well-controlled NbN SIS junctions can be used for terahertz mixer elements instead of Nb SIS junctions.