Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Electronics and Communications in Japan (Part II Electronics)

Dual‐frequency (40/100 GHz) SIS receiver for nobeyama millimeter‐wave array

Masayuki Yamamoto, K. Yamaji, Keiichi WATAZAWA, Junji Inatani, Ryohei Kawabe, Takashi Kasuga

Published Jan 1, 1989• 1 citation
Publisher

Abstract

Abstract The authors developed a dual‐frequency (40/100 GHz) SIS receiver with SIS quasi‐particle tunneling junction element as the mixer, for use in the millimeter‐wave array at Nobeyama Radio Observatory, National Astronomical Observatory. The SIS element used is an array composed of four series‐connected Nb/Al‐AlOx/Nb junctions. The receiver is refrigerated to 4.3 K by a closed‐cycle He refrigerator. The receiver realized a very low receiver noise temperature for a wideband, such as 50 to 80 K for 43 to 49 GHz, and 60 to 100 K for 86 to 115 GHz. A wide dynamic range is also realized. At 40 Ghz, the saturation noise temperature is 2000 to 3000 K, compared with the wideband noise. These results indicate that the SIS array element can effectively improve the mixer saturation level without degrading the receiver performance.

DOI
10.1002/ecjb.4420721206

Related papers

A 100 - 115 GHz SIS receiver for radio astronomy

Hideo Ogawa

A 110 GHz superconductor insulator superconductor (SIS) tunnel junction receiver has been developed and used in regular astronomical observations on the 4m radio telescope at the Department of Astrophysics, Nagoya University. The SIS junction consists of a sandwich structure of Nb/AlOx/Nb, and is cooled to 4.2K with a closed cycle He-gas refrigerator. The receiver exhibits a best double side band noise temperature of 17±2 K at 110GHz. The receiver has a good response over this input frequency range of 98-115 GHz.

International Conference on Infrared, Millimeter, and Terahertz Waves (IRMMW-THz)•Oct 1, 1991•4 citations

Series-connected array of superconductor–insulator–superconductor junctions in the 100 GHz-band heterodyne mixer for FOREST on the Nobeyama 45 m telescope

Taku Nakajima, Hirofumi Inoue, Yumi Fujii +5 more

Abstract We have designed and experimentally evaluated a series-connected array of superconductor–insulator–superconductor (SIS) junctions in the 100 GHz-band mixer for the multi-beam receiver FOREST on the Nobeyama 45 m millimeter-wave telescope. The construction of the junction chip comprised a waveguide probe antenna, impedance-matching circuit, SIS array junction, and choke filter, which were made from a superconducting niobium planar circuit on a quartz substrate. The multi-stage impedance-matching circuit between the feed point and the SIS junction was designed as a capacitively loaded transmission line, and it comprised two sections with high (∼90 Ω) and low (∼10 Ω) characteristic impedance transmission lines. The structure of this tuning line was simple and easy to fabricate, and the feed impedance matched with the SIS junction in a wide frequency range. The signal coupling efficiency was more than 92% and the expected receiver noise temperature was approximately twice the quantum limit for 75–125 GHz based on quantum theory. The array junction devices with three to six connected junctions were fabricated and we measured their performance in terms of the receiver noise temperature and gain compression in the laboratory. We successfully developed an array junction device with a receiver noise temperature of ∼15–30 K and confirmed that the improvement in the saturation power corresponded to the number of junctions. The newly developed array junction mixer was installed in the FOREST receiver and it successfully detected the 12CO(J = 1–0) molecular line toward IRC +10216 with the Nobeyama 45 m telescope.

arXiv:1809.02304•Publications of the Astronomical Society of Japan•Sep 13, 2018•11 citations

Development of superconducting THz receivers for radio astronomy

Yoshinori Uzawa, Yasunori Fujii, M. Kroug +8 more

A total of 73 dual polarization superconductor-insulator-superconductor (SIS) receivers for the Atacama Large Millimeter/submillimeter Array (ALMA) have been successfully produced to observe astronomical signals in the 787-950 GHz frequency band. The receivers use two double sideband (DSB) waveguide mixers with Nb/AlOx/Nb tunnel junctions and NbTiN/SiO2/Al microstrip tuning circuits on quartz substrate. The best achieved DSB receiver noise temperature is 125 K, corresponding to about 3 hf/kBfor 4 K operation.

International Conference on Infrared, Millimeter, and Terahertz Waves (IRMMW-THz)•Sep 1, 2016•2 citations

Quasi-optical submillimeter-wave SIS mixers with NbN/A1N/NbN tunnel junctions

Yoshinori Uzawa, Zhen Wang, Akira Kawakami

We report on low-noise heterodyne mixing with NbN/A1N/NbN tunnel junctions in the submillimeter-wave region for the first time. The receiver consists of the quasi-optical NbN SIS mixer with an integrated tuning circuit in which a radial short stub tuner is incorporated to resonate out the junction capacitance for RF matching and a balanced IF circuit for broadband IF matching. The prepared NbN SIS junction has a current density of 20 kA/cm 2 and is about 1 I1111 in diameter, supplying a small coC JRN product (o)CJRN = 3 at 300 GHz). The junctions showed good dc I-V characteristics, excellent submillimeter-wave responses and sensitive heterodyne mixing responses. From 254 to 350 GHz the average receiver noise temperature measured using by the standard Y-factor method was about 250 K (DSB) at 5 K. The lowest receiver noise temperature, 200 K (DSB), was obtained at around 303 GHz. Comparing NbN/A1N/NbN and Nb/A10x/Nb tunnel junction performance with the same tuning circuit showed that the frequency dependence of the receiver noise temperature agreed well in the two receivers. These results suggest that our well-controlled NbN SIS junctions can be used for terahertz mixer elements instead of Nb SIS junctions.

•Mar 1, 1996•2 citations

Low-noise THz-range Nb based SIS Receivers for Radio Astronomy

Kirill I. Rudakov, Andrey V. Khudchenko, Lyudmila V. Filippenko +4 more

This repost describes our results on development of low-noise heterodyne THz receivers for ground based and space radio astronomy. Superconductor-insulator-superconductor (SIS) mixers that employ high quality Nb-based tunnel junctions are the key element of the most sensitive heterodyne THz receivers. In particular we present here the SIS receivers for frequency range 211-275 GHz and 800-950 GHz with double sideband (DSB) noise temperature of about 25 K and 220 K, respectively. The latest results on development, fabrication techniques and experimental study of the SIS receivers will be discussed.

International Conference on Infrared, Millimeter, and Terahertz Waves (IRMMW-THz)•Nov 8, 2020•8 citations

Development of an SIS Mixer-Based Low-Noise Amplifier Amenable to Josephson Oscillator Pumping

Yoshinori Uzawa, Takafumi Kojima, Kazumasa Makise +4 more

We propose a low-noise and low-power-consumption microwave amplifier using superconductor-insulator-superconductor (SIS) mixers as quasi-particle frequency up- and down-converters pumped by a Josephson array oscillator in the millimeter-wave band. A proof-of-concept study of an amplifier with two W-band waveguide mixers using Nb/Al-AlOx/Nb junctions in a cascade connection demonstrated an average gain of 6 dB and a noise temperature of 12 K from nearly DC to 5 GHz. We also designed and fabricated a Josephson array oscillator at 100 GHz, which consisted of 31 overdamped Josephson junctions placed at each half-wavelength in an Nb microstrip line. The estimated output power of the oscillator was 0.2 μW at 100 GHz, which can be increased by increasing the number of the oscillator junctions. These results suggest that the proposed SIS mixer-based amplifier is suitable for on-chip integrated circuits to be implemented in large-scale multipixel SIS receivers and quantum computers.

IEEE Transactions on Applied Superconductivity•Mar 8, 2023•6 citations
Abstract The authors developed a dual‐frequency (40/100 GHz) SIS receiver with SIS quasi‐particle tunneling junction element as the mixer, for use in the millimeter‐wave array at Nobeyama Radio Observatory, National Astronomical Observatory. The SIS element used is an array composed of four series‐connected Nb/Al‐AlOx/Nb junctions. The receiver is refrigerated to 4.3 K by a closed‐cycle He refrigerator. The receiver realized a very low receiver noise temperature for a wideband, such as 50 to 80 K for 43 to 49 GHz, and 60 to 100 K for 86 to 115 GHz. A wide dynamic range is also realized. At 40 Ghz, the saturation noise temperature is 2000 to 3000 K, compared with the wideband noise. These results indicate that the SIS array element can effectively improve the mixer saturation level without degrading the receiver performance.
A 110 GHz superconductor insulator superconductor (SIS) tunnel junction receiver has been developed and used in regular astronomical observations on the 4m radio telescope at the Department of Astrophysics, Nagoya University. The SIS junction consists of a sandwich structure of Nb/AlOx/Nb, and is cooled to 4.2K with a closed cycle He-gas refrigerator. The receiver exhibits a best double side band noise temperature of 17±2 K at 110GHz. The receiver has a good response over this input frequency range of 98-115 GHz.
Abstract We have designed and experimentally evaluated a series-connected array of superconductor–insulator–superconductor (SIS) junctions in the 100 GHz-band mixer for the multi-beam receiver FOREST on the Nobeyama 45 m millimeter-wave telescope. The construction of the junction chip comprised a waveguide probe antenna, impedance-matching circuit, SIS array junction, and choke filter, which were made from a superconducting niobium planar circuit on a quartz substrate. The multi-stage impedance-matching circuit between the feed point and the SIS junction was designed as a capacitively loaded transmission line, and it comprised two sections with high (∼90 Ω) and low (∼10 Ω) characteristic impedance transmission lines. The structure of this tuning line was simple and easy to fabricate, and the feed impedance matched with the SIS junction in a wide frequency range. The signal coupling efficiency was more than 92% and the expected receiver noise temperature was approximately twice the quantum limit for 75–125 GHz based on quantum theory. The array junction devices with three to six connected junctions were fabricated and we measured their performance in terms of the receiver noise temperature and gain compression in the laboratory. We successfully developed an array junction device with a receiver noise temperature of ∼15–30 K and confirmed that the improvement in the saturation power corresponded to the number of junctions. The newly developed array junction mixer was installed in the FOREST receiver and it successfully detected the 12CO(J = 1–0) molecular line toward IRC +10216 with the Nobeyama 45 m telescope.
A total of 73 dual polarization superconductor-insulator-superconductor (SIS) receivers for the Atacama Large Millimeter/submillimeter Array (ALMA) have been successfully produced to observe astronomical signals in the 787-950 GHz frequency band. The receivers use two double sideband (DSB) waveguide mixers with Nb/AlOx/Nb tunnel junctions and NbTiN/SiO2/Al microstrip tuning circuits on quartz substrate. The best achieved DSB receiver noise temperature is 125 K, corresponding to about 3 hf/kBfor 4 K operation.
We report on low-noise heterodyne mixing with NbN/A1N/NbN tunnel junctions in the submillimeter-wave region for the first time. The receiver consists of the quasi-optical NbN SIS mixer with an integrated tuning circuit in which a radial short stub tuner is incorporated to resonate out the junction capacitance for RF matching and a balanced IF circuit for broadband IF matching. The prepared NbN SIS junction has a current density of 20 kA/cm 2 and is about 1 I1111 in diameter, supplying a small coC JRN product (o)CJRN = 3 at 300 GHz). The junctions showed good dc I-V characteristics, excellent submillimeter-wave responses and sensitive heterodyne mixing responses. From 254 to 350 GHz the average receiver noise temperature measured using by the standard Y-factor method was about 250 K (DSB) at 5 K. The lowest receiver noise temperature, 200 K (DSB), was obtained at around 303 GHz. Comparing NbN/A1N/NbN and Nb/A10x/Nb tunnel junction performance with the same tuning circuit showed that the frequency dependence of the receiver noise temperature agreed well in the two receivers. These results suggest that our well-controlled NbN SIS junctions can be used for terahertz mixer elements instead of Nb SIS junctions.
This repost describes our results on development of low-noise heterodyne THz receivers for ground based and space radio astronomy. Superconductor-insulator-superconductor (SIS) mixers that employ high quality Nb-based tunnel junctions are the key element of the most sensitive heterodyne THz receivers. In particular we present here the SIS receivers for frequency range 211-275 GHz and 800-950 GHz with double sideband (DSB) noise temperature of about 25 K and 220 K, respectively. The latest results on development, fabrication techniques and experimental study of the SIS receivers will be discussed.
We propose a low-noise and low-power-consumption microwave amplifier using superconductor-insulator-superconductor (SIS) mixers as quasi-particle frequency up- and down-converters pumped by a Josephson array oscillator in the millimeter-wave band. A proof-of-concept study of an amplifier with two W-band waveguide mixers using Nb/Al-AlOx/Nb junctions in a cascade connection demonstrated an average gain of 6 dB and a noise temperature of 12 K from nearly DC to 5 GHz. We also designed and fabricated a Josephson array oscillator at 100 GHz, which consisted of 31 overdamped Josephson junctions placed at each half-wavelength in an Nb microstrip line. The estimated output power of the oscillator was 0.2 μW at 100 GHz, which can be increased by increasing the number of the oscillator junctions. These results suggest that the proposed SIS mixer-based amplifier is suitable for on-chip integrated circuits to be implemented in large-scale multipixel SIS receivers and quantum computers.