Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Physical Review B

Fully microwave-tunable universal gates in superconducting qubits with linear couplings and fixed transition frequencies

Chad T. Rigetti, Michel Devoret

Published Apr 5, 2010• 368 citations
Publisher

Abstract

A register of quantum bits with fixed transition frequencies and weakly coupled to one another through simple linear circuit elements is an experimentally minimal architecture for a small-scale superconducting quantum information processor. Presently, the known schemes for implementing two-qubit gates in this system require microwave signals having amplitudes and frequencies precisely tuned to meet a resonance condition, leaving only the signal phases as free experimentally adjustable parameters. Here, we report a minimal and robust microwave scheme to generate fast, tunable universal two-qubit gates: simply irradiate one qubit (the ``control'') at the transition frequency of another (the ``target''). The effective coupling between them is then switched on by tuning only the frequency of this single drive tone; the drive amplitude adjusts the effective coupling strength; and the drive phase selects the particular two-qubit gate implemented. This cross-resonance effect turns on linearly with the ratio of the drive amplitude $\ensuremath{\Omega}$ to the qubit-qubit detuning $\ensuremath{\Delta}$, as compared with earlier proposals that turn on as ${(\ensuremath{\Omega}/\ensuremath{\Delta})}^{4}$.

DOI
10.1103/physrevb.81.134507

Related papers

Native Two-Qubit Gates in Fixed-Coupling, Fixed-Frequency Transmons Beyond Cross-Resonance Interaction

Ken Xuan Wei, Isaac Lauer, Emily Pritchett +3 more

Fixed-frequency superconducting qubits demonstrate remarkable success as platforms for stable and scalable quantum computing. Cross-resonance gates have been the workhorse of fixed-coupling, fixed-frequency superconducting processors, leveraging the entanglement generated by driving one qubit resonantly with a neighbor’s frequency to achieve high-fidelity, universal controlled- () gates. Here, we use on-resonant and off-resonant microwave drives to go beyond cross-resonance, realizing natively interesting two-qubit gates that are not equivalent to gates. In particular, we implement and benchmark native i , , i SWAP , and b gates; in fact, any SU ( 4 ) unitary can be achieved using these techniques. Furthermore, we apply these techniques for an efficient construction of the B gate: a perfect entangler from which any two-qubit gate can be reached in only two applications. We show that these native two-qubit gates are better than their counterparts compiled from cross-resonance gates. We elucidate the resonance conditions required to drive each two-qubit gate and provide a novel frame tracking technique to implement them in Qiskit. Published by the American Physical Society 2024

arXiv:2310.12146•PRX Quantum•May 20, 2024•40 citations

Hardware-Efficient Microwave-Activated Tunable Coupling between Superconducting Qubits

Bradley K. Mitchell, Ravi Naik, Alexis Morvan +7 more

Generating high-fidelity, tunable entanglement between qubits is crucial for realizing gate-based quantum computation. In superconducting circuits, tunable interactions are often implemented using flux-tunable qubits or coupling elements, adding control complexity and noise sources. Here, we realize a tunable ZZ interaction between two transmon qubits with fixed frequencies and fixed coupling, induced by driving both transmons off resonantly. We show tunable coupling over 1 order of magnitude larger than the static coupling, and change the sign of the interaction, enabling cancellation of the idle coupling. Further, this interaction is amenable to large quantum processors: the drive frequency can be flexibly chosen to avoid spurious transitions, and because both transmons are driven, it is resilient to microwave cross talk. We apply this interaction to implement a controlled phase (CZ) gate with a gate fidelity of 99.43(1)% as measured by cycle benchmarking, and we find the fidelity is limited by incoherent errors.

arXiv:2105.05384•Physical Review Letters•Nov 9, 2021•85 citations

Microwave-induced amplitude- and phase-tunable qubit-resonator coupling in circuit quantum electrodynamics

Sina Zeytinoǧlu, Marek Pechal, S. Berger +3 more

In the circuit quantum electrodynamics architecture, both the resonance frequency and the coupling of superconducting qubits to microwave field modes can be controlled via external electric and magnetic fields to explore qubit-photon dynamics in a wide parameter range. Here, we experimentally demonstrate and analyze a scheme for tuning the coupling between a transmon qubit and a microwave resonator using a single coherent drive tone. We treat the transmon as a three-level system, with the qubit subspace defined by the ground and the second excited states. If the drive frequency matches the difference between the resonator and the qubit frequencies, a Jaynes-Cummings-type interaction is induced, which is tunable in both amplitude and phase. We show that coupling strengths of about 10 MHz can be achieved in our setup, limited only by the anharmonicity of the transmon qubit. This scheme has been successfully used to generate microwave photons with a controlled temporal shape [M. Pechal et al., Phys. Rev. X 4, 041010 (2014)] and can be directly implemented with superconducting quantum devices featuring larger anharmonicity for higher coupling strengths.

arXiv:1502.03692•Physical Review A•Apr 30, 2015•105 citations

Coupler Microwave-Activated Controlled-Phase Gate on Fluxonium Qubits

Ilya A. Simakov, Grigoriy S. Mazhorin, Ilya N. Moskalenko +8 more

Tunable couplers have recently become one of the most powerful tools for implementing two-qubit gates between superconducting qubits.A tunable coupler typically includes a nonlinear element, such as a superconducting quantum interference device, which is used to tune the resonance frequency of an LC circuit connecting two qubits.Here we propose a complimentary approach where instead of tuning the resonance frequency of the tunable coupler by applying a quasistatic control signal, we excite by microwave the degree of freedom associated with the coupler itself.Because of strong effective longitudinal coupling between the coupler and the qubits, the frequency of this transition strongly depends on the computational state, leading to different phase accumulations in different states.Using this method, we experimentally demonstrate a controlled-Z gate of 44-ns duration on a fluxonium-based quantum processor, obtaining a fidelity of 97.6% ± 0.4% characterized by cross-entropy benchmarking.

arXiv:2302.09819•PRX Quantum•Nov 3, 2023•26 citations

Baseband Control of Superconducting Qubits with Shared Microwave Drives

Peng Zhao, Ruixia Wang, Mengjun Hu +4 more

Accurate control of qubits is the central requirement for building functional quantum processors. For the current superconducting quantum processor, high-fidelity control of qubits is mainly based on independently calibrated microwave pulses, which could differ from each other in frequencies, amplitudes, and phases. With this control strategy, the needed physical resource could be challenging, especially when scaling up to large-scale quantum processors is considered. Inspired by Kane's proposal for spin-based quantum computing, here, we explore theoretically the possibility of baseband flux control of superconducting qubits with only shared and always-on microwave drives. In our strategy, qubits are by default far detuned from the drive during system idle periods, qubit readout and baseband flux-controlled two-qubit gates can thus be realized with minimal impacts from the always-on drive. By contrast, during working periods, qubits are tuned on resonance with the drive and single-qubit gates can be realized. Therefore, universal qubit control can be achieved with only baseband flux pulses and always-on shared microwave drives. We apply this strategy to the qubit architecture where tunable qubits are coupled via a tunable coupler, and the analysis shows that high-fidelity qubit control is possible. Besides, the baseband control strategy needs fewer physical resources, such as control electronics and cooling power in cryogenic systems, than that of microwave control. Of note, the flexibility of baseband flux control could be employed for addressing the nonuniformity issue of superconducting qubits, potentially allowing the realization of multiplexing and cross-bar technologies and thus controlling large numbers of qubits with fewer control lines. We thus expect that baseband control with shared microwave drives can help build large-scale superconducting quantum processors.

arXiv:2211.06833•Physical Review Applied•May 15, 2023•13 citations

Protocol for Universal Gates in Optimally Biased Superconducting Qubits

Chad T. Rigetti, Alexandre Blais, Michel Devoret

We present a new experimental protocol for performing universal gates in a register of superconducting qubits coupled by fixed on-chip linear reactances. The qubits have fixed, detuned Larmor frequencies and can remain, during the entire gate operation, biased at their optimal working point where decoherence due to fluctuations in control parameters is suppressed to first order. Two-qubit gates are performed by simultaneously irradiating two qubits at their respective Larmor frequencies with appropriate amplitude and phase, while one-qubit gates are performed by the usual single-qubit irradiation pulses.

arXiv:quant-ph/0412009•Physical Review Letters•Jun 22, 2005•115 citations
A register of quantum bits with fixed transition frequencies and weakly coupled to one another through simple linear circuit elements is an experimentally minimal architecture for a small-scale superconducting quantum information processor. Presently, the known schemes for implementing two-qubit gates in this system require microwave signals having amplitudes and frequencies precisely tuned to meet a resonance condition, leaving only the signal phases as free experimentally adjustable parameters. Here, we report a minimal and robust microwave scheme to generate fast, tunable universal two-qubit gates: simply irradiate one qubit (the control'') at the transition frequency of another (the target''). The effective coupling between them is then switched on by tuning only the frequency of this single drive tone; the drive amplitude adjusts the effective coupling strength; and the drive phase selects the particular two-qubit gate implemented. This cross-resonance effect turns on linearly with the ratio of the drive amplitude \ensuremathΩ\ensuremath{\Omega}\ensuremathΩ to the qubit-qubit detuning \ensuremathΔ\ensuremath{\Delta}\ensuremathΔ, as compared with earlier proposals that turn on as (\ensuremathΩ/\ensuremathΔ)4{(\ensuremath{\Omega}/\ensuremath{\Delta})}^{4}(\ensuremathΩ/\ensuremathΔ)4.
Fixed-frequency superconducting qubits demonstrate remarkable success as platforms for stable and scalable quantum computing. Cross-resonance gates have been the workhorse of fixed-coupling, fixed-frequency superconducting processors, leveraging the entanglement generated by driving one qubit resonantly with a neighbor’s frequency to achieve high-fidelity, universal controlled- () gates. Here, we use on-resonant and off-resonant microwave drives to go beyond cross-resonance, realizing natively interesting two-qubit gates that are not equivalent to gates. In particular, we implement and benchmark native i , , i SWAP , and b gates; in fact, any SU ( 4 ) unitary can be achieved using these techniques. Furthermore, we apply these techniques for an efficient construction of the B gate: a perfect entangler from which any two-qubit gate can be reached in only two applications. We show that these native two-qubit gates are better than their counterparts compiled from cross-resonance gates. We elucidate the resonance conditions required to drive each two-qubit gate and provide a novel frame tracking technique to implement them in Qiskit. Published by the American Physical Society 2024
Generating high-fidelity, tunable entanglement between qubits is crucial for realizing gate-based quantum computation. In superconducting circuits, tunable interactions are often implemented using flux-tunable qubits or coupling elements, adding control complexity and noise sources. Here, we realize a tunable ZZ interaction between two transmon qubits with fixed frequencies and fixed coupling, induced by driving both transmons off resonantly. We show tunable coupling over 1 order of magnitude larger than the static coupling, and change the sign of the interaction, enabling cancellation of the idle coupling. Further, this interaction is amenable to large quantum processors: the drive frequency can be flexibly chosen to avoid spurious transitions, and because both transmons are driven, it is resilient to microwave cross talk. We apply this interaction to implement a controlled phase (CZ) gate with a gate fidelity of 99.43(1)% as measured by cycle benchmarking, and we find the fidelity is limited by incoherent errors.
In the circuit quantum electrodynamics architecture, both the resonance frequency and the coupling of superconducting qubits to microwave field modes can be controlled via external electric and magnetic fields to explore qubit-photon dynamics in a wide parameter range. Here, we experimentally demonstrate and analyze a scheme for tuning the coupling between a transmon qubit and a microwave resonator using a single coherent drive tone. We treat the transmon as a three-level system, with the qubit subspace defined by the ground and the second excited states. If the drive frequency matches the difference between the resonator and the qubit frequencies, a Jaynes-Cummings-type interaction is induced, which is tunable in both amplitude and phase. We show that coupling strengths of about 10 MHz can be achieved in our setup, limited only by the anharmonicity of the transmon qubit. This scheme has been successfully used to generate microwave photons with a controlled temporal shape [M. Pechal et al., Phys. Rev. X 4, 041010 (2014)] and can be directly implemented with superconducting quantum devices featuring larger anharmonicity for higher coupling strengths.
Tunable couplers have recently become one of the most powerful tools for implementing two-qubit gates between superconducting qubits.A tunable coupler typically includes a nonlinear element, such as a superconducting quantum interference device, which is used to tune the resonance frequency of an LC circuit connecting two qubits.Here we propose a complimentary approach where instead of tuning the resonance frequency of the tunable coupler by applying a quasistatic control signal, we excite by microwave the degree of freedom associated with the coupler itself.Because of strong effective longitudinal coupling between the coupler and the qubits, the frequency of this transition strongly depends on the computational state, leading to different phase accumulations in different states.Using this method, we experimentally demonstrate a controlled-Z gate of 44-ns duration on a fluxonium-based quantum processor, obtaining a fidelity of 97.6% ± 0.4% characterized by cross-entropy benchmarking.
Accurate control of qubits is the central requirement for building functional quantum processors. For the current superconducting quantum processor, high-fidelity control of qubits is mainly based on independently calibrated microwave pulses, which could differ from each other in frequencies, amplitudes, and phases. With this control strategy, the needed physical resource could be challenging, especially when scaling up to large-scale quantum processors is considered. Inspired by Kane's proposal for spin-based quantum computing, here, we explore theoretically the possibility of baseband flux control of superconducting qubits with only shared and always-on microwave drives. In our strategy, qubits are by default far detuned from the drive during system idle periods, qubit readout and baseband flux-controlled two-qubit gates can thus be realized with minimal impacts from the always-on drive. By contrast, during working periods, qubits are tuned on resonance with the drive and single-qubit gates can be realized. Therefore, universal qubit control can be achieved with only baseband flux pulses and always-on shared microwave drives. We apply this strategy to the qubit architecture where tunable qubits are coupled via a tunable coupler, and the analysis shows that high-fidelity qubit control is possible. Besides, the baseband control strategy needs fewer physical resources, such as control electronics and cooling power in cryogenic systems, than that of microwave control. Of note, the flexibility of baseband flux control could be employed for addressing the nonuniformity issue of superconducting qubits, potentially allowing the realization of multiplexing and cross-bar technologies and thus controlling large numbers of qubits with fewer control lines. We thus expect that baseband control with shared microwave drives can help build large-scale superconducting quantum processors.
We present a new experimental protocol for performing universal gates in a register of superconducting qubits coupled by fixed on-chip linear reactances. The qubits have fixed, detuned Larmor frequencies and can remain, during the entire gate operation, biased at their optimal working point where decoherence due to fluctuations in control parameters is suppressed to first order. Two-qubit gates are performed by simultaneously irradiating two qubits at their respective Larmor frequencies with appropriate amplitude and phase, while one-qubit gates are performed by the usual single-qubit irradiation pulses.