Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2211.06833 · Physical Review Applied

Baseband Control of Superconducting Qubits with Shared Microwave Drives

Peng Zhao, Ruixia Wang, Mengjun Hu, Teng Ma, Peng Xu, Yirong Jin, Haifeng Yu

Published May 15, 2023• 13 citations
arXivHTMLPDF

Abstract

Accurate control of qubits is the central requirement for building functional quantum processors. For the current superconducting quantum processor, high-fidelity control of qubits is mainly based on independently calibrated microwave pulses, which could differ from each other in frequencies, amplitudes, and phases. With this control strategy, the needed physical resource could be challenging, especially when scaling up to large-scale quantum processors is considered. Inspired by Kane's proposal for spin-based quantum computing, here, we explore theoretically the possibility of baseband flux control of superconducting qubits with only shared and always-on microwave drives. In our strategy, qubits are by default far detuned from the drive during system idle periods, qubit readout and baseband flux-controlled two-qubit gates can thus be realized with minimal impacts from the always-on drive. By contrast, during working periods, qubits are tuned on resonance with the drive and single-qubit gates can be realized. Therefore, universal qubit control can be achieved with only baseband flux pulses and always-on shared microwave drives. We apply this strategy to the qubit architecture where tunable qubits are coupled via a tunable coupler, and the analysis shows that high-fidelity qubit control is possible. Besides, the baseband control strategy needs fewer physical resources, such as control electronics and cooling power in cryogenic systems, than that of microwave control. Of note, the flexibility of baseband flux control could be employed for addressing the nonuniformity issue of superconducting qubits, potentially allowing the realization of multiplexing and cross-bar technologies and thus controlling large numbers of qubits with fewer control lines. We thus expect that baseband control with shared microwave drives can help build large-scale superconducting quantum processors.

DOI
10.1103/physrevapplied.19.054050

Related papers

Hardware-Efficient Microwave-Activated Tunable Coupling between Superconducting Qubits

Bradley K. Mitchell, Ravi Naik, Alexis Morvan +7 more

Generating high-fidelity, tunable entanglement between qubits is crucial for realizing gate-based quantum computation. In superconducting circuits, tunable interactions are often implemented using flux-tunable qubits or coupling elements, adding control complexity and noise sources. Here, we realize a tunable ZZ interaction between two transmon qubits with fixed frequencies and fixed coupling, induced by driving both transmons off resonantly. We show tunable coupling over 1 order of magnitude larger than the static coupling, and change the sign of the interaction, enabling cancellation of the idle coupling. Further, this interaction is amenable to large quantum processors: the drive frequency can be flexibly chosen to avoid spurious transitions, and because both transmons are driven, it is resilient to microwave cross talk. We apply this interaction to implement a controlled phase (CZ) gate with a gate fidelity of 99.43(1)% as measured by cycle benchmarking, and we find the fidelity is limited by incoherent errors.

arXiv:2105.05384•Physical Review Letters•Nov 9, 2021•85 citations

All-to-all connectivity via adiabatic ZZ interactions in a superconducting flux qubit processor

Elena Lupo, Nguyen H. Le, Eran Ginossar +1 more

Scalable superconducting quantum processors would benefit from high qubit connectivity, yet existing architectures connect neighbouring qubits via tunable couplers, which introduce substantial wiring and control overhead. Here, we propose a baseband-driven adiabatic ZZ gate that entangles any selected pair in a register of flux qubits coupled via a common cavity. The qubits stay dc-biased at their flux sweet spot. Strong drives applied selectively through local flux lines, at frequencies far below the qubit transitions, adiabatically tilt the quantization axes and generate an effective longitudinal ZZ interaction. The strength of the coupling is tunable and controlled by the amplitudes and relative phase of the drives rather than by any resonance condition. Numerical simulations give coherent gate errors below $10^{-4}$ over broad ranges of drive frequency, with comparable fidelities for two simultaneous gates in a four-qubit register. The protocol is robust against frequency fluctuations and remains effective even when many qubits are coupled to the cavity.

arXiv:2611.12576•Nov 9, 2026•0 citations

Fully microwave-tunable universal gates in superconducting qubits with linear couplings and fixed transition frequencies

Chad T. Rigetti, Michel Devoret

A register of quantum bits with fixed transition frequencies and weakly coupled to one another through simple linear circuit elements is an experimentally minimal architecture for a small-scale superconducting quantum information processor. Presently, the known schemes for implementing two-qubit gates in this system require microwave signals having amplitudes and frequencies precisely tuned to meet a resonance condition, leaving only the signal phases as free experimentally adjustable parameters. Here, we report a minimal and robust microwave scheme to generate fast, tunable universal two-qubit gates: simply irradiate one qubit (the ``control'') at the transition frequency of another (the ``target''). The effective coupling between them is then switched on by tuning only the frequency of this single drive tone; the drive amplitude adjusts the effective coupling strength; and the drive phase selects the particular two-qubit gate implemented. This cross-resonance effect turns on linearly with the ratio of the drive amplitude $\ensuremath{\Omega}$ to the qubit-qubit detuning $\ensuremath{\Delta}$, as compared with earlier proposals that turn on as ${(\ensuremath{\Omega}/\ensuremath{\Delta})}^{4}$.

Physical Review B•Apr 5, 2010•368 citations

Pulse design of baseband flux control for adiabatic controlled-phase gates in superconducting circuits

Qi Ding, Alan V. Oppenheim, Petros T. Boufounos +4 more

Despite progress towards achieving low error rates with superconducting qubits, error-prone two-qubit gates remain a bottleneck for realizing large-scale quantum computers. Therefore, a systematic framework to design high-fidelity gates becomes imperative. One type of two-qubit gate in superconducting qubits is the controlled-phase (CPHASE) gate, which utilizes a conditional interaction between higher energy levels of the qubits controlled by a baseband flux pulse on one of the qubits or a tunable coupler. In this work, we study an adiabatic implementation of CPHASE gates and formulate the design of the control trajectory for the gate as a pulse-design problem. We show in simulation that the Chebyshev-based trajectory can, in certain cases, enable gates with gate infidelity lower by an average of 23.3% when compared to the widely used Slepian-based trajectory.

arXiv:2407.02722•Physical Review Applied•May 16, 2025•10 citations

Orthogonal frequency-division multiplexing for simultaneous gate operations on multiple qubits via a shared control line

Haruki Mitarai, Yukihiro Tadokoro, Hiroya Tanaka

The increasing number of qubits in quantum processors necessitates a corresponding increase in the number of control lines between the processor, which is typically operated at cryogenic temperatures, and external electronics. Scaling poses significant challenges in terms of the thermal loads, forming a major bottleneck in the realization of large-scale quantum computers. In this study, we analyze simultaneous gate operations on multiple qubits using microwaves transmitted via a single cable in a frequency-division multiplexing (FDM) scheme. By employing rectangular control microwave pulses, we reveal the contribution of drive frequency spacing to gate fidelity. Through theoretical and numerical analyses, we demonstrate that orthogonal and quasi-orthogonal microwave signals suppress interference in simultaneously driven qubits, thereby ensuring high gate fidelity. Additionally, we provide design guidelines for key parameters, including pulse length, number of multiplexed microwave signals, and rotation angle, to achieve precise qubit operations. Our findings enable a scalable FDM-based microwave control scheme suitable for quantum processors with a large number of qubits.

quant-pharXiv:2511.16855•Physical Review Applied•Nov 24, 2025•2 citations

Inherent flux crosstalk and coupler-driven single-qubit gates in superconducting circuits

Balázs Gulácsi, Guido Burkard

Crosstalk refers to unwanted qubit addressing. This is particularly detrimental when scaling up quantum information systems because unintended interactions limit their overall performance. For superconducting qubits, tunable couplings and frequency tunability achieved through externally applied magnetic fluxes enable high-fidelity entangling gates; however, they also introduce crosstalk through unintended flux coupling. In this work, we investigate the impact of time-dependent external magnetic fluxes in quantized circuits on superconducting qubit couplings. We find that non-trivial cross-voltage driving emerges between capacitively linked qubits when the magnetic flux threading the SQUID loop of a qubit varies in time, in a manner analogous to Faraday's law of induction. Crucially, we show that this effect enables fast single qubit control through the coupler element in standard tunable-coupler architectures, potentially eliminating the need for individual microwave $XY$ control lines.

quant-pharXiv:2606.10970•Physical Review Applied•Jun 10, 2026•0 citations
Accurate control of qubits is the central requirement for building functional quantum processors. For the current superconducting quantum processor, high-fidelity control of qubits is mainly based on independently calibrated microwave pulses, which could differ from each other in frequencies, amplitudes, and phases. With this control strategy, the needed physical resource could be challenging, especially when scaling up to large-scale quantum processors is considered. Inspired by Kane's proposal for spin-based quantum computing, here, we explore theoretically the possibility of baseband flux control of superconducting qubits with only shared and always-on microwave drives. In our strategy, qubits are by default far detuned from the drive during system idle periods, qubit readout and baseband flux-controlled two-qubit gates can thus be realized with minimal impacts from the always-on drive. By contrast, during working periods, qubits are tuned on resonance with the drive and single-qubit gates can be realized. Therefore, universal qubit control can be achieved with only baseband flux pulses and always-on shared microwave drives. We apply this strategy to the qubit architecture where tunable qubits are coupled via a tunable coupler, and the analysis shows that high-fidelity qubit control is possible. Besides, the baseband control strategy needs fewer physical resources, such as control electronics and cooling power in cryogenic systems, than that of microwave control. Of note, the flexibility of baseband flux control could be employed for addressing the nonuniformity issue of superconducting qubits, potentially allowing the realization of multiplexing and cross-bar technologies and thus controlling large numbers of qubits with fewer control lines. We thus expect that baseband control with shared microwave drives can help build large-scale superconducting quantum processors.
Generating high-fidelity, tunable entanglement between qubits is crucial for realizing gate-based quantum computation. In superconducting circuits, tunable interactions are often implemented using flux-tunable qubits or coupling elements, adding control complexity and noise sources. Here, we realize a tunable ZZ interaction between two transmon qubits with fixed frequencies and fixed coupling, induced by driving both transmons off resonantly. We show tunable coupling over 1 order of magnitude larger than the static coupling, and change the sign of the interaction, enabling cancellation of the idle coupling. Further, this interaction is amenable to large quantum processors: the drive frequency can be flexibly chosen to avoid spurious transitions, and because both transmons are driven, it is resilient to microwave cross talk. We apply this interaction to implement a controlled phase (CZ) gate with a gate fidelity of 99.43(1)% as measured by cycle benchmarking, and we find the fidelity is limited by incoherent errors.
Scalable superconducting quantum processors would benefit from high qubit connectivity, yet existing architectures connect neighbouring qubits via tunable couplers, which introduce substantial wiring and control overhead. Here, we propose a baseband-driven adiabatic ZZ gate that entangles any selected pair in a register of flux qubits coupled via a common cavity. The qubits stay dc-biased at their flux sweet spot. Strong drives applied selectively through local flux lines, at frequencies far below the qubit transitions, adiabatically tilt the quantization axes and generate an effective longitudinal ZZ interaction. The strength of the coupling is tunable and controlled by the amplitudes and relative phase of the drives rather than by any resonance condition. Numerical simulations give coherent gate errors below 10−410^{-4}10−4 over broad ranges of drive frequency, with comparable fidelities for two simultaneous gates in a four-qubit register. The protocol is robust against frequency fluctuations and remains effective even when many qubits are coupled to the cavity.
A register of quantum bits with fixed transition frequencies and weakly coupled to one another through simple linear circuit elements is an experimentally minimal architecture for a small-scale superconducting quantum information processor. Presently, the known schemes for implementing two-qubit gates in this system require microwave signals having amplitudes and frequencies precisely tuned to meet a resonance condition, leaving only the signal phases as free experimentally adjustable parameters. Here, we report a minimal and robust microwave scheme to generate fast, tunable universal two-qubit gates: simply irradiate one qubit (the ``control'') at the transition frequency of another (the ``target''). The effective coupling between them is then switched on by tuning only the frequency of this single drive tone; the drive amplitude adjusts the effective coupling strength; and the drive phase selects the particular two-qubit gate implemented. This cross-resonance effect turns on linearly with the ratio of the drive amplitude $\ensuremath{\Omega}$ to the qubit-qubit detuning $\ensuremath{\Delta}$, as compared with earlier proposals that turn on as ${(\ensuremath{\Omega}/\ensuremath{\Delta})}^{4}$.
Despite progress towards achieving low error rates with superconducting qubits, error-prone two-qubit gates remain a bottleneck for realizing large-scale quantum computers. Therefore, a systematic framework to design high-fidelity gates becomes imperative. One type of two-qubit gate in superconducting qubits is the controlled-phase (CPHASE) gate, which utilizes a conditional interaction between higher energy levels of the qubits controlled by a baseband flux pulse on one of the qubits or a tunable coupler. In this work, we study an adiabatic implementation of CPHASE gates and formulate the design of the control trajectory for the gate as a pulse-design problem. We show in simulation that the Chebyshev-based trajectory can, in certain cases, enable gates with gate infidelity lower by an average of 23.3% when compared to the widely used Slepian-based trajectory.
The increasing number of qubits in quantum processors necessitates a corresponding increase in the number of control lines between the processor, which is typically operated at cryogenic temperatures, and external electronics. Scaling poses significant challenges in terms of the thermal loads, forming a major bottleneck in the realization of large-scale quantum computers. In this study, we analyze simultaneous gate operations on multiple qubits using microwaves transmitted via a single cable in a frequency-division multiplexing (FDM) scheme. By employing rectangular control microwave pulses, we reveal the contribution of drive frequency spacing to gate fidelity. Through theoretical and numerical analyses, we demonstrate that orthogonal and quasi-orthogonal microwave signals suppress interference in simultaneously driven qubits, thereby ensuring high gate fidelity. Additionally, we provide design guidelines for key parameters, including pulse length, number of multiplexed microwave signals, and rotation angle, to achieve precise qubit operations. Our findings enable a scalable FDM-based microwave control scheme suitable for quantum processors with a large number of qubits.
Crosstalk refers to unwanted qubit addressing. This is particularly detrimental when scaling up quantum information systems because unintended interactions limit their overall performance. For superconducting qubits, tunable couplings and frequency tunability achieved through externally applied magnetic fluxes enable high-fidelity entangling gates; however, they also introduce crosstalk through unintended flux coupling. In this work, we investigate the impact of time-dependent external magnetic fluxes in quantized circuits on superconducting qubit couplings. We find that non-trivial cross-voltage driving emerges between capacitively linked qubits when the magnetic flux threading the SQUID loop of a qubit varies in time, in a manner analogous to Faraday's law of induction. Crucially, we show that this effect enables fast single qubit control through the coupler element in standard tunable-coupler architectures, potentially eliminating the need for individual microwave XYXYXY control lines.