Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2302.09819 · PRX Quantum

Coupler Microwave-Activated Controlled-Phase Gate on Fluxonium Qubits

Ilya A. Simakov, Grigoriy S. Mazhorin, Ilya N. Moskalenko, Nikolay N. Abramov, Alexander A. Grigorev, Dmitry O. Moskalev, Anastasiya A. Pishchimova, Nikita S. Smirnov, E. V. Zikiy, Ilya A. Rodionov, Ilya S. Besedin

Published Nov 3, 2023• 26 citations
arXivHTMLPDF

Abstract

Tunable couplers have recently become one of the most powerful tools for implementing two-qubit gates between superconducting qubits.A tunable coupler typically includes a nonlinear element, such as a superconducting quantum interference device, which is used to tune the resonance frequency of an LC circuit connecting two qubits.Here we propose a complimentary approach where instead of tuning the resonance frequency of the tunable coupler by applying a quasistatic control signal, we excite by microwave the degree of freedom associated with the coupler itself.Because of strong effective longitudinal coupling between the coupler and the qubits, the frequency of this transition strongly depends on the computational state, leading to different phase accumulations in different states.Using this method, we experimentally demonstrate a controlled-Z gate of 44-ns duration on a fluxonium-based quantum processor, obtaining a fidelity of 97.6% ± 0.4% characterized by cross-entropy benchmarking.

DOI
10.1103/prxquantum.4.040321

Related papers

Tunable Inductive Coupler for High-Fidelity Gates Between Fluxonium Qubits

Helin Zhang, Chunyang Ding, Daniel Weiss +9 more

The fluxonium qubit is a promising candidate for quantum computation due to its long coherence times and large anharmonicity. We present a tunable coupler that realizes strong inductive coupling between two heavy-fluxonium qubits, each with approximately 50 -MHz frequencies and approximately 5 -GHz anharmonicities. The coupler enables the qubits to have a large tuning range of X X coupling strengths ( − 35 to 75 MHz). The Z Z coupling strength is < 3 kHz across the entire coupler bias range and < 100 Hz at the coupler off position. These qualities lead to fast high-fidelity single- and two-qubit gates. By driving at the difference frequency of the two qubits, we realize a i SWAP gate in 258 ns with fidelity 99.72%, and by driving at the sum frequency of the two qubits, we achieve a b SWAP gate in 102 ns with fidelity 99.91%. This latter gate is only five qubit Larmor periods in length. We run cross-entropy benchmarking for over 20 consecutive hours and measure stable gate fidelities, with b SWAP drift ( 2 σ ) < 0.02 % and i SWAP drift < 0.08 % . Published by the American Physical Society 2024

arXiv:2309.05720•PRX Quantum•May 2, 2024•76 citations

Fast microwave-driven two-qubit gates between fluxonium qubits with a transmon coupler

Siddharth Singh, Eugene Y. Huang, Jinlun Hu +6 more

Two qubit gates constitute fundamental building blocks in the realization of large-scale quantum devices. Using superconducting circuits, two-qubit gates have previously been implemented in different ways with each method aiming to maximize gate fidelity. Another important goal of a new gate scheme is to minimize the complexity of gate calibration. In this work, we demonstrate a high-fidelity two-qubit gate between two fluxonium qubits enabled by an intermediate capacitively coupled transmon. The coupling strengths between the qubits and the coupler are designed to minimize residual crosstalk while still allowing for fast gate operations. The gate is based on frequency selectively exciting the coupler using a microwave drive to complete a 2$π$ rotation, conditional on the state of the fluxonium qubits. When successful, this drive scheme implements a conditional phase gate. Using analytically derived pulse shapes, we minimize unwanted excitations of the coupler and obtain gate errors of $10^{-2}$ for gate times below 60~ns. At longer durations, our gate is limited by relaxation of the coupler. Our results show how carefully designed control pulses can speed up frequency selective entangling gates.

arXiv:2504.13718•Physical Review Applied•Oct 28, 2025•11 citations

Microwave-activated controlled- Z gate for fixed-frequency fluxonium qubits

Konstantin Nesterov, Ivan Pechenezhskiy, Chen Wang +2 more

The superconducting fluxonium circuit is an artificial atom with a strongly anharmonic spectrum: When biased at a half flux quantum, the lowest qubit transition is an order of magnitude smaller in frequency than those to higher levels. Similar to conventional atomic systems, such a frequency separation between the computational and noncomputational subspaces allows independent optimizations of the qubit coherence and two-qubit interactions. Here, we describe a controlled-$Z$ gate for two fluxoniums connected either capacitively or inductively, with qubit transitions fixed near $500\phantom{\rule{3.33333pt}{0ex}}\mathrm{MHz}$. The gate is activated by a microwave drive at a resonance involving the second excited state. We estimate intrinsic gate fidelities over 99.9% with gate times below 100 ns.

arXiv:1802.03095•Physical Review A•Sep 24, 2018•38 citations

High-Fidelity, Frequency-Flexible Two-Qubit Fluxonium Gates with a Transmon Coupler

Leon Ding, Max Hays, Youngkyu Sung +16 more

We propose and demonstrate an architecture for fluxonium-fluxonium two-qubit gates mediated by transmon couplers (FTF, for fluxonium-transmon-fluxonium).Relative to architectures that exclusively rely on a direct coupling between fluxonium qubits, FTF enables stronger couplings for gates using noncomputational states while simultaneously suppressing the static controlled-phase entangling rate (ZZ) down to kilohertz levels, all without requiring strict parameter matching.Here, we implement FTF with a flux-tunable transmon coupler and demonstrate a microwave-activated controlled-Z (CZ) gate whose operation frequency can be tuned over a 2-GHz range, adding frequency allocation freedom for FTFs in larger systems.Across this range, state-of-the-art CZ gate fidelities are observed over many bias points and reproduced across the two devices characterized in this work.After optimizing both the operation frequency and the gate duration, we achieve peak CZ fidelities in the 99.85%-99.9%range.Finally, we implement model-free reinforcement learning of the pulse parameters to boost the mean gate fidelity up to 99.922% Æ 0.009%, averaged over roughly an hour between scheduled training runs.Beyond the microwave-activated CZ gate we present here, FTF can be applied to a variety of other fluxonium gate schemes to improve gate fidelities and passively reduce unwanted ZZ interactions.

arXiv:2304.06087•Physical Review X•Sep 25, 2023•180 citations

High fidelity two-qubit gates on fluxoniums using a tunable coupler

Ilya N. Moskalenko, Ilya A. Simakov, Nikolay N. Abramov +7 more

Abstract Superconducting fluxonium qubits provide a promising alternative to transmons on the path toward large-scale superconductor-based quantum computing due to their better coherence and larger anharmonicity. A major challenge for multi-qubit fluxonium devices is the experimental demonstration of a scalable crosstalk-free multi-qubit architecture with high-fidelity single-qubit and two-qubit gates, single-shot readout, and state initialization. Here, we present a two-qubit fluxonium-based quantum processor with a tunable coupler element. We experimentally demonstrate fSim-type and controlled-Z-gates with 99.55 and 99.23% fidelities, respectively. The residual ZZ interaction is suppressed down to the few kHz levels. Using a galvanically coupled flux control line, we implement high-fidelity single-qubit gates and ground state initialization with a single arbitrary waveform generator channel per qubit.

arXiv:2203.16302•npj Quantum Information•Nov 8, 2022•132 citations

Tunable Coupler for Realizing a Controlled-Phase Gate with Dynamically Decoupled Regime in a Superconducting Circuit

X. Li, T. Cai, H. Yan +13 more

Controllable interaction between superconducting qubits is desirable for large-scale quantum computation and simulation. Here, based on a theoretical proposal by Yan et al. [Phys. Rev. Appl. 10, 054061 (2018)] we experimentally demonstrate a simply designed and flux-controlled tunable coupler with a continuous tunability by adjusting the coupler frequency, which can completely turn off adjacent superconducting qubit coupling. Utilizing the tunable interaction between two qubits via the coupler, we implement a different type of controlled-phase (cz) gate with ``dynamically decoupled regime,'' which allows the qubit-qubit coupling to be only ``on'' at the usual operating point while dynamically ``off'' during the tuning process of one qubit frequency into and out of the operating point. This scheme not only efficiently suppresses the leakage out of the computational subspace, but also allows for the acquired two-qubit phase being geometric at the operating point. We achieve an average cz gate fidelity of $98.3\ifmmode\pm\else\textpm\fi{}0.6\mathrm{%}$, which is dominantly limited by qubit decoherence. The demonstrated tunable coupler provides a desirable tool to suppress adjacent qubit coupling and is suitable for large-scale quantum computation and simulation.

arXiv:1912.10721•Physical Review Applied•Aug 25, 2020•121 citations
Tunable couplers have recently become one of the most powerful tools for implementing two-qubit gates between superconducting qubits.A tunable coupler typically includes a nonlinear element, such as a superconducting quantum interference device, which is used to tune the resonance frequency of an LC circuit connecting two qubits.Here we propose a complimentary approach where instead of tuning the resonance frequency of the tunable coupler by applying a quasistatic control signal, we excite by microwave the degree of freedom associated with the coupler itself.Because of strong effective longitudinal coupling between the coupler and the qubits, the frequency of this transition strongly depends on the computational state, leading to different phase accumulations in different states.Using this method, we experimentally demonstrate a controlled-Z gate of 44-ns duration on a fluxonium-based quantum processor, obtaining a fidelity of 97.6% ± 0.4% characterized by cross-entropy benchmarking.
The fluxonium qubit is a promising candidate for quantum computation due to its long coherence times and large anharmonicity. We present a tunable coupler that realizes strong inductive coupling between two heavy-fluxonium qubits, each with approximately 50 -MHz frequencies and approximately 5 -GHz anharmonicities. The coupler enables the qubits to have a large tuning range of X X coupling strengths ( − 35 to 75 MHz). The Z Z coupling strength is < 3 kHz across the entire coupler bias range and < 100 Hz at the coupler off position. These qualities lead to fast high-fidelity single- and two-qubit gates. By driving at the difference frequency of the two qubits, we realize a i SWAP gate in 258 ns with fidelity 99.72%, and by driving at the sum frequency of the two qubits, we achieve a b SWAP gate in 102 ns with fidelity 99.91%. This latter gate is only five qubit Larmor periods in length. We run cross-entropy benchmarking for over 20 consecutive hours and measure stable gate fidelities, with b SWAP drift ( 2 σ ) < 0.02 % and i SWAP drift < 0.08 % . Published by the American Physical Society 2024
Two qubit gates constitute fundamental building blocks in the realization of large-scale quantum devices. Using superconducting circuits, two-qubit gates have previously been implemented in different ways with each method aiming to maximize gate fidelity. Another important goal of a new gate scheme is to minimize the complexity of gate calibration. In this work, we demonstrate a high-fidelity two-qubit gate between two fluxonium qubits enabled by an intermediate capacitively coupled transmon. The coupling strengths between the qubits and the coupler are designed to minimize residual crosstalk while still allowing for fast gate operations. The gate is based on frequency selectively exciting the coupler using a microwave drive to complete a 2πππ rotation, conditional on the state of the fluxonium qubits. When successful, this drive scheme implements a conditional phase gate. Using analytically derived pulse shapes, we minimize unwanted excitations of the coupler and obtain gate errors of 10−210^{-2}10−2 for gate times below 60~ns. At longer durations, our gate is limited by relaxation of the coupler. Our results show how carefully designed control pulses can speed up frequency selective entangling gates.
The superconducting fluxonium circuit is an artificial atom with a strongly anharmonic spectrum: When biased at a half flux quantum, the lowest qubit transition is an order of magnitude smaller in frequency than those to higher levels. Similar to conventional atomic systems, such a frequency separation between the computational and noncomputational subspaces allows independent optimizations of the qubit coherence and two-qubit interactions. Here, we describe a controlled-ZZZ gate for two fluxoniums connected either capacitively or inductively, with qubit transitions fixed near 500MHz500\phantom{\rule{3.33333pt}{0ex}}\mathrm{MHz}500MHz. The gate is activated by a microwave drive at a resonance involving the second excited state. We estimate intrinsic gate fidelities over 99.9% with gate times below 100 ns.
We propose and demonstrate an architecture for fluxonium-fluxonium two-qubit gates mediated by transmon couplers (FTF, for fluxonium-transmon-fluxonium).Relative to architectures that exclusively rely on a direct coupling between fluxonium qubits, FTF enables stronger couplings for gates using noncomputational states while simultaneously suppressing the static controlled-phase entangling rate (ZZ) down to kilohertz levels, all without requiring strict parameter matching.Here, we implement FTF with a flux-tunable transmon coupler and demonstrate a microwave-activated controlled-Z (CZ) gate whose operation frequency can be tuned over a 2-GHz range, adding frequency allocation freedom for FTFs in larger systems.Across this range, state-of-the-art CZ gate fidelities are observed over many bias points and reproduced across the two devices characterized in this work.After optimizing both the operation frequency and the gate duration, we achieve peak CZ fidelities in the 99.85%-99.9%range.Finally, we implement model-free reinforcement learning of the pulse parameters to boost the mean gate fidelity up to 99.922% Æ 0.009%, averaged over roughly an hour between scheduled training runs.Beyond the microwave-activated CZ gate we present here, FTF can be applied to a variety of other fluxonium gate schemes to improve gate fidelities and passively reduce unwanted ZZ interactions.
Abstract Superconducting fluxonium qubits provide a promising alternative to transmons on the path toward large-scale superconductor-based quantum computing due to their better coherence and larger anharmonicity. A major challenge for multi-qubit fluxonium devices is the experimental demonstration of a scalable crosstalk-free multi-qubit architecture with high-fidelity single-qubit and two-qubit gates, single-shot readout, and state initialization. Here, we present a two-qubit fluxonium-based quantum processor with a tunable coupler element. We experimentally demonstrate fSim-type and controlled-Z-gates with 99.55 and 99.23% fidelities, respectively. The residual ZZ interaction is suppressed down to the few kHz levels. Using a galvanically coupled flux control line, we implement high-fidelity single-qubit gates and ground state initialization with a single arbitrary waveform generator channel per qubit.
Controllable interaction between superconducting qubits is desirable for large-scale quantum computation and simulation. Here, based on a theoretical proposal by Yan et al. [Phys. Rev. Appl. 10, 054061 (2018)] we experimentally demonstrate a simply designed and flux-controlled tunable coupler with a continuous tunability by adjusting the coupler frequency, which can completely turn off adjacent superconducting qubit coupling. Utilizing the tunable interaction between two qubits via the coupler, we implement a different type of controlled-phase (cz) gate with ``dynamically decoupled regime,'' which allows the qubit-qubit coupling to be only ``on'' at the usual operating point while dynamically ``off'' during the tuning process of one qubit frequency into and out of the operating point. This scheme not only efficiently suppresses the leakage out of the computational subspace, but also allows for the acquired two-qubit phase being geometric at the operating point. We achieve an average cz gate fidelity of $98.3\ifmmode\pm\else\textpm\fi{}0.6\mathrm{%}$, which is dominantly limited by qubit decoherence. The demonstrated tunable coupler provides a desirable tool to suppress adjacent qubit coupling and is suitable for large-scale quantum computation and simulation.