Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Transactions on Applied Superconductivity

Enhanced optical detection in a Josephson junction

M. S. Wire, Lee O. Heflinger, Bruce J. Dalrymple, Michael Leung, T. Pham, Larry R. Eaton, Arnold H. Silver

Published Mar 1, 1993• 2 citations
Publisher

Abstract

Shifting of the energy gap of a Nb Josephson junction under direct optical illumination was measured. The response is linear with optical input power over more than five orders of magnitude and is nearly independent of temperature from 4 to 8 K. The rise time of this signal is faster than the 2- mu s rise time of the chopped light signal. These direct signals are 500 to 1500 times larger than those obtained when the same optical power is focused elsewhere on the substrate. This enhanced direct response is interpreted as resulting from thermal isolation of the Josephson junction from the substrate due to thermal boundary resistance.>

DOI
10.1109/77.233440

Related papers

Niobium Josephson junction bolometers for optical detection in the visible-infrared region

E. Monticone, V. Lacquaniti, R. Steni +4 more

The response of Nb Josephson junctions fabricated on different substrates, silicon and amorphous glass, is measured under optical illumination at several conditions of light intensity and light chopping frequency. The linearity of the response on the optical power extends over five orders of magnitude. The signal of the junction on silicon is 2 orders of magnitude lower than that of the junction on amorphous glass, but at least one order of magnitude faster, as the time constant of a directly irradiated junction on silicon is lower than 10 /spl mu/s. The signal dependence on chopping frequency of the junction on amorphous glass is typical of a strong thermal coupling between film and substrate, while for the junction on silicon it depends mainly on the thermal boundary resistance between film and substrate.

IEEE Transactions on Applied Superconductivity•Jun 1, 1999•4 citations

Analysis of NB Josephson Junction Properties under Optical Irradiation

E. Monticone, M. Rajteri, Sabino Maggi +6 more

The gap voltage shift of Nb Josephson junctions fabricated on different substrates is measured under optical illumination at several conditions of light intensity and chopping frequency. The signal dependence on the chopping frequency for junctions realized on glass substrates is bolometer-like with a strong thermal coupling between film and substrate. The responsivity of a junction of 50 μ m × 20 μ m is 50 V/W in vacuum and at liquid helium temperature, and its time constant is lower than 10 μ s . The linearity of the response on the optical power extends over five order of magnitude. The response of junctions fabricated on silicon substrates is flat versus the chopping frequency and about 100 times lower than a junction on glass with the same incident optical power. The shift of the gap at temperatures between 1.2 K and 4.2 K has been measured to separate the nonequilibrium effects from the heating effects.

International Journal of Modern Physics B•Apr 20, 1999•1 citation

Josephson tunnel junctions as highly sensitive photodetectors for radiometry

E. Monticone, V. Lacquaniti, M. Rajteri +1 more

Josephson tunnel junctions have recently proved to be fairly sensitive photodetectors over a broad range of wavelengths. This paper shows the results obtained with Nb/Al-AlO x /Nb Josephson junctions at 4.2 K irradiated via an optical fibre and laser light at λ = 633 nm and 690 nm. The responsivity of the devices is about 50 V/W and is linear over several decades. Moreover, stacks of two Josephson junctions are shown to have twice the responsivity of a single junction. A thermal model of the device is considered and the responsivity is calculated as a function of the temperature derivative of the energy gap, the thermal parameters of the junction, and the modulation frequency of the incident beam.

Metrologia•Aug 1, 1998•1 citation

Detection of Direct and Indirect Terahertz Waves using a Nb-based Superconducting Tunnel Junction

Chiko Otani, R. Nakano, Tohru Taino +7 more

We are developing a broadband THz detectors using Nb-based superconducting tunnel junctions. We found two components in a current signal for 1-2 THz pulse input. From the comparison of results obtained for the signals, the frequency response for the different size of STJs and the STJs fabricated on different substrate materials, we demonstrate that they correspond to photons absorbed with the superconductor electrode (referred as 'direct' component) and phonons generated by photons absorbed with the substrate (refered as 'phonon-mediated' component).

International Conference on Infrared, Millimeter, and Terahertz Waves (IRMMW-THz)•Jan 18, 2006•0 citations

Systematic modulation of superconducting gap dynamics in YBCO|BNT|YBCO Josephson Junctions through THz field interaction and BNT ferroelectric barrier

Sukhanidhan Singh, Muthukkumaran Karthikeyan, Geoffrey Chanda +5 more

The integration of ferroelectric barriers into high-temperature Josephson junctions offers a pathway to tunable superconducting quantum devices. Here, we demonstrate robust Josephson coupling in YBa2Cu3O7-x (YBCO)/Bi0.5Na0.5TiO3 (BNT)/YBCO trilayer junctions incorporating a 40 nm ferroelectric BNT barrier. Epitaxial trilayers were fabricated by pulsed laser deposition on SrTiO3 substrates and investigated under broadband terahertz (THz) irradiation (0.5-2.5 THz). At 1.5 THz, close to the Josephson plasma resonance, the BNT polarization increased from 33.4 to 46.4 uC/cm2 at 30 K, enhancing superconducting transport. The junctions exhibited a well-defined zero-voltage supercurrent branch, with the critical current Ic(T) remaining nearly constant up to 60 K and reaching 468.2 uA under 1.5 THz excitation, evidencing strong phase coherence. Scanning tunneling spectroscopy revealed an enhanced superconducting gap in YBCO/BNT/YBCO (Delta = 1.3 meV) compared with pure YBCO (Delta = 1.05 meV), while optical conductivity measurements showed a reduction in conductivity and gap with increasing temperature, consistent with BCS theory under THz excitation. Atomic force microscopy and X-ray reflectivity confirmed uniform morphology and sharp interfaces, excluding defect-mediated transport. Magnetic field modulation of Ic(B) exhibited a canonical Fraunhofer interference pattern, and resistance mapping revealed alternating lobes of high and low dissipation, indicating coherent Josephson tunneling. These results establish that Josephson coupling is intrinsic to the YBCO/BNT/YBCO junctions, enabled by the dipolar character and dynamic THz response of the BNT barrier. This study identifies BNT as a viable, tunable barrier material for next-generation high-Tc superconducting quantum devices.

arXiv:2607.12394•Jul 14, 2026•0 citations

Far Infrared Response of Point-Contact Josephson Junctions

C. C. Grimes, P. L. Richards, S. M. Shapiro

We have measured spectral-response curves of superconducting point contacts suggesting the existence of frequency-dependent Josephson current amplitudes peaking in the vicinity of the energy gap. These point-contact Josephson junctions respond sensitively and with high speed to millimeter and submillimeter radiation. Radiation emitted to free space by one such junction was detected by another junction.

Physical Review Letters•Aug 22, 1966•59 citations
Shifting of the energy gap of a Nb Josephson junction under direct optical illumination was measured. The response is linear with optical input power over more than five orders of magnitude and is nearly independent of temperature from 4 to 8 K. The rise time of this signal is faster than the 2- mu s rise time of the chopped light signal. These direct signals are 500 to 1500 times larger than those obtained when the same optical power is focused elsewhere on the substrate. This enhanced direct response is interpreted as resulting from thermal isolation of the Josephson junction from the substrate due to thermal boundary resistance.>
The response of Nb Josephson junctions fabricated on different substrates, silicon and amorphous glass, is measured under optical illumination at several conditions of light intensity and light chopping frequency. The linearity of the response on the optical power extends over five orders of magnitude. The signal of the junction on silicon is 2 orders of magnitude lower than that of the junction on amorphous glass, but at least one order of magnitude faster, as the time constant of a directly irradiated junction on silicon is lower than 10 /spl mu/s. The signal dependence on chopping frequency of the junction on amorphous glass is typical of a strong thermal coupling between film and substrate, while for the junction on silicon it depends mainly on the thermal boundary resistance between film and substrate.
The gap voltage shift of Nb Josephson junctions fabricated on different substrates is measured under optical illumination at several conditions of light intensity and chopping frequency. The signal dependence on the chopping frequency for junctions realized on glass substrates is bolometer-like with a strong thermal coupling between film and substrate. The responsivity of a junction of 50 μ m × 20 μ m is 50 V/W in vacuum and at liquid helium temperature, and its time constant is lower than 10 μ s . The linearity of the response on the optical power extends over five order of magnitude. The response of junctions fabricated on silicon substrates is flat versus the chopping frequency and about 100 times lower than a junction on glass with the same incident optical power. The shift of the gap at temperatures between 1.2 K and 4.2 K has been measured to separate the nonequilibrium effects from the heating effects.
Josephson tunnel junctions have recently proved to be fairly sensitive photodetectors over a broad range of wavelengths. This paper shows the results obtained with Nb/Al-AlO x /Nb Josephson junctions at 4.2 K irradiated via an optical fibre and laser light at λ = 633 nm and 690 nm. The responsivity of the devices is about 50 V/W and is linear over several decades. Moreover, stacks of two Josephson junctions are shown to have twice the responsivity of a single junction. A thermal model of the device is considered and the responsivity is calculated as a function of the temperature derivative of the energy gap, the thermal parameters of the junction, and the modulation frequency of the incident beam.
We are developing a broadband THz detectors using Nb-based superconducting tunnel junctions. We found two components in a current signal for 1-2 THz pulse input. From the comparison of results obtained for the signals, the frequency response for the different size of STJs and the STJs fabricated on different substrate materials, we demonstrate that they correspond to photons absorbed with the superconductor electrode (referred as 'direct' component) and phonons generated by photons absorbed with the substrate (refered as 'phonon-mediated' component).
The integration of ferroelectric barriers into high-temperature Josephson junctions offers a pathway to tunable superconducting quantum devices. Here, we demonstrate robust Josephson coupling in YBa2Cu3O7-x (YBCO)/Bi0.5Na0.5TiO3 (BNT)/YBCO trilayer junctions incorporating a 40 nm ferroelectric BNT barrier. Epitaxial trilayers were fabricated by pulsed laser deposition on SrTiO3 substrates and investigated under broadband terahertz (THz) irradiation (0.5-2.5 THz). At 1.5 THz, close to the Josephson plasma resonance, the BNT polarization increased from 33.4 to 46.4 uC/cm2 at 30 K, enhancing superconducting transport. The junctions exhibited a well-defined zero-voltage supercurrent branch, with the critical current Ic(T) remaining nearly constant up to 60 K and reaching 468.2 uA under 1.5 THz excitation, evidencing strong phase coherence. Scanning tunneling spectroscopy revealed an enhanced superconducting gap in YBCO/BNT/YBCO (Delta = 1.3 meV) compared with pure YBCO (Delta = 1.05 meV), while optical conductivity measurements showed a reduction in conductivity and gap with increasing temperature, consistent with BCS theory under THz excitation. Atomic force microscopy and X-ray reflectivity confirmed uniform morphology and sharp interfaces, excluding defect-mediated transport. Magnetic field modulation of Ic(B) exhibited a canonical Fraunhofer interference pattern, and resistance mapping revealed alternating lobes of high and low dissipation, indicating coherent Josephson tunneling. These results establish that Josephson coupling is intrinsic to the YBCO/BNT/YBCO junctions, enabled by the dipolar character and dynamic THz response of the BNT barrier. This study identifies BNT as a viable, tunable barrier material for next-generation high-Tc superconducting quantum devices.