Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2401.13895 · Physical Review A

Monte Carlo simulations of the capture and cooling of alkali-metal atoms by a supersonic helium jet

Jeremy J. Glick, William Huntington, Michael Borysow, Kevin Wen, Daniel J. Heinzen, Jacek A. Kłos, Eite Tiesinga

Published Aug 27, 2024• 2 citations
arXivHTMLPDF

Abstract

We present three-dimensional Monte Carlo simulations of the capture of 1000 K $^{7}\mathrm{Li}$ or 500 K $^{87}\mathrm{Rb}$ atoms by a continuous supersonic $^{4}\mathrm{He}$ jet and show that intense, cold alkali-metal beams form. The simulations use differential cross sections obtained from quantum scattering calculations of $^{7}\mathrm{Li}$ or $^{87}\mathrm{Rb}$ atoms with $^{4}\mathrm{He}$ atoms for relative collision energies between $k\ifmmode\times\else\texttimes\fi{}1$ mK and $k\ifmmode\times\else\texttimes\fi{}3000$ K, where $k$ is the Boltzmann constant. For collision energies higher than approximately $k\ifmmode\times\else\texttimes\fi{}4$ K the collisions favor forward scattering, deflecting the $^{7}\mathrm{Li}$ or $^{87}\mathrm{Rb}$ atoms by no more than a few degrees. From the simulations, we find that about 1% of the lithium atoms are seeded into the $^{4}\mathrm{He}$ jet, resulting in a lithium beam with a most probable velocity of about $210\phantom{\rule{0.28em}{0ex}}\mathrm{m}/\mathrm{s}$ and number densities on the order of ${10}^{8}\phantom{\rule{4pt}{0ex}}{\mathrm{cm}}^{\ensuremath{-}3}$. Simulations predict narrow yet asymmetric velocity distributions which are verified by comparing to fluorescence measurements of the seeded $^{7}\mathrm{Li}$ atoms. We find agreement between simulated and experimentally measured seeded $^{7}\mathrm{Li}$ densities to be better than 50% across a range of $^{4}\mathrm{He}$ flow rates. We make predictions for seeding efficiency and cooling of $^{87}\mathrm{Rb}$ by a supersonic $^{4}\mathrm{He}$ jet. The seeding efficiency for $^{87}\mathrm{Rb}$ is expected to be similar to $^{7}\mathrm{Li}$.

DOI
10.1103/physreva.110.023114

Related papers

A high-intensity cold atom source

Michael Borysow

Presented in this thesis is the design and characterization of a new, high-flux source of cold atoms based on continuous, post-nozzle injection of lithium atoms into a cryogenic, supersonic helium jet. To date, experiments have been performed with lithium injection fractions up to [approximately equal to]10⁻⁶, where fluorescence spectroscopy reveals successful capture and thermalization of lithium atoms within the helium jet. The observed lithium beam copropagates with the helium jet and has a temperature of less than 10 mK, a brightness of 1.1x10¹⁹ m⁻² s⁻¹ sr⁻¹, and a brilliance of 3.1x10²⁰ m⁻² s⁻¹ sr⁻¹. Lithium atoms contained within a solid angle of [approximately equal to]0.018 sr are good candidates for future magnetic extraction. This results in a potentially capturable lithium flux of 1.1x10¹² s⁻¹, comparable to the existing record for a cold atomic beam. Also presented is preliminary data showing lithium fluorescence nearly 1 m downstream, demonstrating that the cold lithium beam can be successfully extracted from the seeding region. Numerical simulations reproduce capture efficiency to within 50%, suggesting that the process is well understood. We believe that successful seeding may be possible at a fraction up to 10⁻⁴. Seeding at this rate could produce an atomic beam with a flux as high as 1.3x10¹⁴ s⁻¹ at a phase-space density up to 1.6x10⁻⁷, corresponding to brightness and brilliance of order 10²² m⁻² s⁻¹ sr⁻¹ and 10²⁴ m⁻² s⁻¹ sr⁻¹ , respectively. If this novel cooling method performs as well at higher incident lithium flux, it could serve as a pump source and pave the way to the realization of the first truly continuous atom laser.

•Aug 1, 2012•0 citations

Cold beam of Li 7 He 4 dimers

Jeremy Glick, William Huntington, Daniel J. Heinzen

We demonstrate an approach for producing a high-flux beam of $^{7}\mathrm{Li}^{4}\mathrm{He}$ dimers by performing postnozzle seeding of a lithium beam into a supersonic helium expansion. The molecular beam has a longitudinal temperature of 13(6) mK and a continuous flux on the order of ${10}^{11}$ dimers/s confined within a solid angle of 0.16 sr. Monte Carlo simulations of molecular formation based on $\mathit{ab}$ initio quantum scattering calculations are carried out and compared to the experimentally observed molecular flux. Extensions of this work could lead towards a more quantitative understanding of few-body collision processes of alkali and helium atoms.

arXiv:2402.16209•Physical Review A•Aug 5, 2024•1 citation

A continuous lithium atomic beam source for cryogenic apparatus

Brady Stoll

We have created an atomic beam source of lithium atoms for use in a cryogenic environment. \nThis beam source is expected to provide a \nflux of 10 to the 18 atoms/s. The main features of this source \nare a reservoir chamber of solid lithium heated with heater wire, creating a lithium gas that \ntravels down an ohmically heated tube and exits as an effusive beam. That beam is directed at \na cold supersonic jet of helium. As lithium atoms enter the helium gas they rapidly thermalize \nand become entrained. The design challenges faced included directing the heat load away from \nthe cold elements of the cryogenic chamber, obtaining the correct temperatures to provide the \ndesired \nflux, and measuring the beam as it exited the reservoir. Through the use of laser induced fluorescence, we believe we have observed capture of lithium by the helium jet. Such a beam source \ncan be used to form an intense cold atom source with the potential future application of serving \nas a pump source for an atom laser.

•Jan 1, 2017•0 citations

A High Intensity Cold Atom Source

Jeremy Glick, William Huntington, Daniel J. Heinzen

A method for producing a high intensity cold atomic beam is discussed. The method is based on post-nozzle seeding of lithium into a supersonic helium jet.

Conference on Lasers and Electro-Optics•Jan 1, 2024•0 citations

Supersonic Molecular Beams of Alkali Dimers

Robert J. Gordon, Y. T. Lee, Dudley R. Herschbach

Intense alkali beams containing up to 30% mole fraction of K2, Rb2, or Cs2 have been generated from a supersonic nozzle expansion, with oven temperatures up to ∼ 900°K (corresponding to alkali vapor pressures up to ∼ 350 torr) and nozzle temperatures ∼ 50–300°K higher. The total beam intensity obtained reached ∼ 5 × 1017 particles sec−1·sr−1. An inhomogeneous deflecting magnet was used to separate the dimer and atom components of the beam, and the variation of dimer concentration with oven pressure and nozzle temperature were studied for a variety of nozzle sizes (throat diameters 0.04–0.15 mm). The velocity distributions of the atom and dimer components were also measured and found to be quite similar; the peaks occur at velocities up to 70% higher than the most probable atom velocity in the oven, and the widths are very narrow, corresponding to random translational temperatures as low as ∼ 30°K, and Mach numbers up to ∼ 15. A simple one-dimensional theory of dimerization which takes into account vibrational relaxation and heat of condensation is found to be consistent with the data. It is shown that the observed velocity distributions and the variation of the dimer yield with pressure and nozzle diameter imply that most of the heat of condensation does not contribute to the beam acceleration but goes into vibrational excitation of the dimer molecules. A nominal value of ∼ 3 × 10−30 cm6 sec−1 at ∼ 600°K is obtained for the recombination rate constant for Cs+Cs+Cs→Cs2+Cs. A reduced variable plot is provided which enables the theory to be applied to nozzle expansions of any substance for which the chemical recombination is governed by three-body collisions.

The Journal of Chemical Physics•Mar 15, 1971•139 citations

Intense continuous cold-atom source

William Huntington, Jeremy Glick, Michael Borysow +1 more

The authors demonstrate an intense, continuous cold atomic beam generated via postnozzle seeding of a supersonic ${}^{4}$He jet with ${}^{7}$Li atoms, which is comparable to the highest flux sources based on laser cooling. The technique could potentially be widely applicable to any paramagnetic atom or molecule.

arXiv:2208.10584•Physical Review A•Jan 6, 2023•10 citations
We present three-dimensional Monte Carlo simulations of the capture of 1000 K 7Li^{7}\mathrm{Li}7Li or 500 K 87Rb^{87}\mathrm{Rb}87Rb atoms by a continuous supersonic 4He^{4}\mathrm{He}4He jet and show that intense, cold alkali-metal beams form. The simulations use differential cross sections obtained from quantum scattering calculations of 7Li^{7}\mathrm{Li}7Li or 87Rb^{87}\mathrm{Rb}87Rb atoms with 4He^{4}\mathrm{He}4He atoms for relative collision energies between k\ifmmode×\else\texttimes\fi1k\ifmmode\times\else\texttimes\fi{}1k\ifmmode×\else\texttimes\fi1 mK and k\ifmmode×\else\texttimes\fi3000k\ifmmode\times\else\texttimes\fi{}3000k\ifmmode×\else\texttimes\fi3000 K, where kkk is the Boltzmann constant. For collision energies higher than approximately k\ifmmode×\else\texttimes\fi4k\ifmmode\times\else\texttimes\fi{}4k\ifmmode×\else\texttimes\fi4 K the collisions favor forward scattering, deflecting the 7Li^{7}\mathrm{Li}7Li or 87Rb^{87}\mathrm{Rb}87Rb atoms by no more than a few degrees. From the simulations, we find that about 1% of the lithium atoms are seeded into the 4He^{4}\mathrm{He}4He jet, resulting in a lithium beam with a most probable velocity of about 210m/s210\phantom{\rule{0.28em}{0ex}}\mathrm{m}/\mathrm{s}210m/s and number densities on the order of 108cm\ensuremath−3{10}^{8}\phantom{\rule{4pt}{0ex}}{\mathrm{cm}}^{\ensuremath{-}3}108cm\ensuremath−3. Simulations predict narrow yet asymmetric velocity distributions which are verified by comparing to fluorescence measurements of the seeded 7Li^{7}\mathrm{Li}7Li atoms. We find agreement between simulated and experimentally measured seeded 7Li^{7}\mathrm{Li}7Li densities to be better than 50% across a range of 4He^{4}\mathrm{He}4He flow rates. We make predictions for seeding efficiency and cooling of 87Rb^{87}\mathrm{Rb}87Rb by a supersonic 4He^{4}\mathrm{He}4He jet. The seeding efficiency for 87Rb^{87}\mathrm{Rb}87Rb is expected to be similar to 7Li^{7}\mathrm{Li}7Li.
Presented in this thesis is the design and characterization of a new, high-flux source of cold atoms based on continuous, post-nozzle injection of lithium atoms into a cryogenic, supersonic helium jet. To date, experiments have been performed with lithium injection fractions up to [approximately equal to]10⁻⁶, where fluorescence spectroscopy reveals successful capture and thermalization of lithium atoms within the helium jet. The observed lithium beam copropagates with the helium jet and has a temperature of less than 10 mK, a brightness of 1.1x10¹⁹ m⁻² s⁻¹ sr⁻¹, and a brilliance of 3.1x10²⁰ m⁻² s⁻¹ sr⁻¹. Lithium atoms contained within a solid angle of [approximately equal to]0.018 sr are good candidates for future magnetic extraction. This results in a potentially capturable lithium flux of 1.1x10¹² s⁻¹, comparable to the existing record for a cold atomic beam. Also presented is preliminary data showing lithium fluorescence nearly 1 m downstream, demonstrating that the cold lithium beam can be successfully extracted from the seeding region. Numerical simulations reproduce capture efficiency to within 50%, suggesting that the process is well understood. We believe that successful seeding may be possible at a fraction up to 10⁻⁴. Seeding at this rate could produce an atomic beam with a flux as high as 1.3x10¹⁴ s⁻¹ at a phase-space density up to 1.6x10⁻⁷, corresponding to brightness and brilliance of order 10²² m⁻² s⁻¹ sr⁻¹ and 10²⁴ m⁻² s⁻¹ sr⁻¹ , respectively. If this novel cooling method performs as well at higher incident lithium flux, it could serve as a pump source and pave the way to the realization of the first truly continuous atom laser.
We demonstrate an approach for producing a high-flux beam of 7Li4He^{7}\mathrm{Li}^{4}\mathrm{He}7Li4He dimers by performing postnozzle seeding of a lithium beam into a supersonic helium expansion. The molecular beam has a longitudinal temperature of 13(6) mK and a continuous flux on the order of 1011{10}^{11}1011 dimers/s confined within a solid angle of 0.16 sr. Monte Carlo simulations of molecular formation based on ab\mathit{ab}ab initio quantum scattering calculations are carried out and compared to the experimentally observed molecular flux. Extensions of this work could lead towards a more quantitative understanding of few-body collision processes of alkali and helium atoms.
We have created an atomic beam source of lithium atoms for use in a cryogenic environment. \nThis beam source is expected to provide a \nflux of 10 to the 18 atoms/s. The main features of this source \nare a reservoir chamber of solid lithium heated with heater wire, creating a lithium gas that \ntravels down an ohmically heated tube and exits as an effusive beam. That beam is directed at \na cold supersonic jet of helium. As lithium atoms enter the helium gas they rapidly thermalize \nand become entrained. The design challenges faced included directing the heat load away from \nthe cold elements of the cryogenic chamber, obtaining the correct temperatures to provide the \ndesired \nflux, and measuring the beam as it exited the reservoir. Through the use of laser induced fluorescence, we believe we have observed capture of lithium by the helium jet. Such a beam source \ncan be used to form an intense cold atom source with the potential future application of serving \nas a pump source for an atom laser.
Intense alkali beams containing up to 30% mole fraction of K2, Rb2, or Cs2 have been generated from a supersonic nozzle expansion, with oven temperatures up to ∼ 900°K (corresponding to alkali vapor pressures up to ∼ 350 torr) and nozzle temperatures ∼ 50–300°K higher. The total beam intensity obtained reached ∼ 5 × 1017 particles sec−1·sr−1. An inhomogeneous deflecting magnet was used to separate the dimer and atom components of the beam, and the variation of dimer concentration with oven pressure and nozzle temperature were studied for a variety of nozzle sizes (throat diameters 0.04–0.15 mm). The velocity distributions of the atom and dimer components were also measured and found to be quite similar; the peaks occur at velocities up to 70% higher than the most probable atom velocity in the oven, and the widths are very narrow, corresponding to random translational temperatures as low as ∼ 30°K, and Mach numbers up to ∼ 15. A simple one-dimensional theory of dimerization which takes into account vibrational relaxation and heat of condensation is found to be consistent with the data. It is shown that the observed velocity distributions and the variation of the dimer yield with pressure and nozzle diameter imply that most of the heat of condensation does not contribute to the beam acceleration but goes into vibrational excitation of the dimer molecules. A nominal value of ∼ 3 × 10−30 cm6 sec−1 at ∼ 600°K is obtained for the recombination rate constant for Cs+Cs+Cs→Cs2+Cs. A reduced variable plot is provided which enables the theory to be applied to nozzle expansions of any substance for which the chemical recombination is governed by three-body collisions.
The authors demonstrate an intense, continuous cold atomic beam generated via postnozzle seeding of a supersonic 4{}^{4}4He jet with 7{}^{7}7Li atoms, which is comparable to the highest flux sources based on laser cooling. The technique could potentially be widely applicable to any paramagnetic atom or molecule.