An atom trapping technique for determining absolute, total ionization cross sections (TICS) out of an excited atom is presented. The unique feature of our method is in utilizing Doppler cooling of neutral atoms to determine ionization cross sections. This fluorescence-monitoring experiment, which is a variant of the ``trap loss'' technique, has enabled us to obtain the experimental electron impact ionization cross sections out of the Cs 62P3∕2 state between 7eV and 400eV. CCC, RMPS, and Born theoretical results are also presented for both the ground and excited states of cesium and rubidium. In the low energy region (<11eV) where best agreement between these excited state measurements and theory might be expected, a discrepancy of approximately a factor of five is observed. Above this energy there are significant contributions to the TICS from both autoionization and multiple ionization.
Abstract We report the generation of multiple electron beams using a cold atom electron source (CAES) combined with a spatial light modulator (SLM). In the experiment, neutral 87Rb atoms are confined in a magneto-optical trap and cooled to approximately 700μK. By shaping the intensity profile of the excitation laser via the SLM, the spatial distribution of the excited atoms can be precisely controlled. The excited atoms are then ionized by a dye laser, and the ionized electrons are extracted and focused by an electric field to form multiple electron beams. As a demonstration, we generate regular arrays of 3×3,4×4,5×5,6×6 beams, each with a spot size of about 100μm and a normalized transverse emittance of ∼0.4×10−9m⋅rad⋅eV. This programmable electron beam technique holds potential for applications in electron-beam lithography and wafer inspection.