Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Chinese Physics B

Generation of multiple electron beams by cold atom electron source

H.B. Wang, Haoyu Huang, Jianing Sun, Chunkai Xu, Enliang Wang, Xu Shan, Xiangjun Chen

Published Apr 27, 2026• 0 citations
Publisher

Abstract

Abstract We report the generation of multiple electron beams using a cold atom electron source (CAES) combined with a spatial light modulator (SLM). In the experiment, neutral ${ }^{87} \mathrm{Rb}$ atoms are confined in a magneto-optical trap and cooled to approximately $700 \mu \mathrm{~K}$. By shaping the intensity profile of the excitation laser via the SLM, the spatial distribution of the excited atoms can be precisely controlled. The excited atoms are then ionized by a dye laser, and the ionized electrons are extracted and focused by an electric field to form multiple electron beams. As a demonstration, we generate regular arrays of $3 \times 3,4 \times 4,5 \times 5,6 \times 6$ beams, each with a spot size of about $100 \mu \mathrm{~m}$ and a normalized transverse emittance of $\sim 0.4 \times 10^{-9} \mathrm{~m} \cdot \mathrm{rad} \cdot \sqrt{\mathrm{eV}}$. This programmable electron beam technique holds potential for applications in electron-beam lithography and wafer inspection.

DOI
10.1088/1674-1056/ae64d2

Related papers

Programmable multiple ion beams based on a magneto-optical trap ion source

H W Wang, Haoyu Huang, Jianing Sun +4 more

We report a programmable multiple ion beam system developed by combing a magneto-optical trap ion source with a spatial light modulator (SLM). Neutral rubidium atoms are trapped into a magneto-optical trap and cooled to 700 μK. An excitation laser beam, the intensity distribution of which is shaped into a square array by the SLM, selectively excites the cold atoms, which are subsequently ionized by an ionization laser beam. The ions are then extracted by an electric field to produce multiple ion beams. A 3×3 ion beam array has been generated. The size of each beams is 180 μm, and the transversal reduced emittance of multiple ion beams at the source is evaluated to be 1.65 × 10−9 m radeV. We also demonstrate the generation of ion bunches with a user-defined spatial pattern. In the future, by integrating this programmable multiple ion beam system with high reduction ion optics, it is possible to generate nanoscale multiple focused ion beams for the potential applications in maskless patterning and direct writing lithography.

Journal of Applied Physics•May 15, 2026•0 citations

Using laser-cooled atoms as a focused ion beam source

J. L. Hanssen, E. A. Dakin, Jabez J. McClelland +1 more

The authors describe a new method for creating a high quality focused ion beam using laser-cooled neutral atoms in a magneto-optical trap as an ion source. They show that this new technique can provide spot resolutions and brightness values that are better than the state of the art in focused ion beams. The source can be used with a range of different ionic species and can be combined with laser cooling techniques to exert unprecedented control over the ion emission, for example, producing single ions “on demand.” The beam quality is a result of a high brightness and a narrow energy distribution, both of which stem from the cold temperature (≈100μK) of the atoms. The ions are produced by subjecting the cold neutral atoms to a photoionization laser, after which they become a compact source of nearly monoenergetic ions. With the application of a potential gradient, the ions form a beam that can be focused via standard ion optical techniques. They discuss estimations based on the initial size of the ion cloud and the energy distribution and show that the resulting beam has a low emittance.

Journal of Vacuum Science & Technology B Microelectronics and Nanometer Structures Processing Measurement and Phenomena•Nov 1, 2006•20 citations

The AC-MOT cold atom electron source

Michael E. Jones

This thesis presents details of a new type of cold atom electron source (CAES) that uses an alternating current magneto-optical trap (AC-MOT). Cold atom electron sources produce electron bunches by threshold photoionisation from a population of laser-cooled atoms. The electrons extracted from the atoms are made into a beam which has an ultra-low transverse velocity distribution. The low velocity distribution increases the brightness and reduces the energy spread of the beam, making CAESs potential sources for future electron diffraction and electron spectroscopy studies. The newly commissioned source detailed here produces focused electron bunches with characteristic temperatures as low as 12.6 ± 0.8 K, at a rate of up to 10 Hz, and with a bunch charge of 2.2±0.2fC, comparable to other state-of-the-art cold atom electron sources. The AC-MOT CAES can also produce cold bunches with energies <200 eV, which is lower than has previously been reported for this type of source. The electrons originate from a population of laser-cooled 85Rb atoms held in an AC- MOT. The AC-MOT CAES design allows the magnetic trapping fields to be switched to zero in 32 μs, more than �ˆ�175 times faster than is possible using a comparable DC-MOT source. This means that electron bunches can be created and extracted in a magnetic field-free environment without any reduction in trap density and hence bunch charge, as occurs in conventional DC-MOT sources. The design, development, characterisation, and operation of the systems needed for the new AC-MOT CAES are detailed in this thesis. This includes details of the atom trapping system, the photoionisation system, the electron extraction system and the various timing systems for creation and characterisation of the resultant cold electron bunches. Finally, the characterisation of the AC-MOT CAES itself is presented, and the measured beam metrics are used to compare the new AC-MOT CAES with other CAES designs which are under development.

•May 31, 2019•1 citation

Laser-cooled atoms as a focused ion-beam source

J. L. Hanssen, Jabez J. McClelland, E. A. Dakin +1 more

The evolving field of nanofabrication demands that more precise fabrication and evaluation tools be developed. We describe a method for creating a high quality focused ion beam with enhanced capabilities using an ion source based on laser-cooled neutral atoms in a magneto-optical trap. This technique will improve resolution and brightness beyond the current state of the art, can be used with the full range of atomic species that can be laser cooled and trapped, and will allow unprecedented control over the ion emission, allowing, for example, the production of single ions ``on demand.'' We give estimates for the emittance and present a realistic ray tracing analysis of a basic focusing system demonstrating the feasibility of focusing the beam to a spot size of less than $10\phantom{\rule{0.3em}{0ex}}\mathrm{nm}$.

Physical Review A•Dec 21, 2006•49 citations

Shaped electron bunches from ultracold plasma

David V. Sheludko

This thesis presents the development of a new apparatus, and imaging tech- niques, used to produce shaped cold electron bunches from ultracold plasma (UCP). Due to their low temperature, cold electron bunches from UCP have the potential to provide a compact electron source with sufficient brightness and coherence to enable single-shot ultrafast diffractive imaging of nano-scale samples, such as bio-molecules. To create the electron bunch, a cold (70 μK) cloud of 108 rubidium-85 atoms was prepared in a magneto optical trap (MOT). Some of the atoms were excited to an intermediate state using a laser with a spatially varying in- tensity profile, then ionised by a second laser pulse. The shaped excitation laser allowed two-dimensional control of the electron density. The ionisation laser could, in principle, also be spatially varying, to allow three dimensional manipulation of the electron bunch shape. Due to Coulomb repulsion betweeen electrons within a bunch, the brightness of the source is critically dependent on its initial shape, and therefore the shape of the atom cloud. Uniform density bunches are particularly desirable due to their linear space-charge expansion. To optimise the source through production of uniform bunches, knowledge of the spatial density distribution of atoms in the cloud is required. Conventional imaging techniques for cold atoms are either technically demanding or destructive to the atom cloud, and are unsuitable for this application, providing direct motivation for the development of new methods. I have developed two new imaging techniques for use in shaped electron bunch production. The new techniques are particularly suited to our application, but are applicable to the cold atom research community in general, offer- ing several advantages over conventional methods. The first method adapts a phase-contrast imaging technique to measure the spatial distribution of atoms in a specific excited state. The second approach allows single-shot imaging of inhomogeneous atom clouds; that is, where both the density and refractive index may be spatially varying. The method uses a perturbative approach in conjunction with phase retrieval based on the transport of in- tensity equation. This technique is also potentially valuable for studies of atomic coherence effects in cold atoms and was demonstrated using spatially modulated electromagnetically induced transparency. In collaboration with other members of our research group and in parallel with the imaging research, I also designed and constructed a new appara- tus to produce UCP. The experiment first produced electron bunches in late 2009, and using the imaging techniques I developed, the results of the first shaped electron bunches from UCP are presented here. Due to the low tem- perature of the electrons, such shaped bunches can only be produced and observed using a cold electron source. Conventional thermal sources, includ- ing photoemission and field emission sources, produce hot electrons whose high temperature immediately diffuses any initial structure. The effects of increased electron temperature on the quality of the bunch shape are inves- tigated here, resulting in the conclusion that cold electrons are essential for observing, and thus optimising, shaped bunches. Arbitrarily shaped bunches are demonstrated for the first time, using an intensity shaped excitation laser beam followed by uniform ionisation of the excited atom distribution. The laser intensity profile is adjusted using a spatial light modulator (SLM). Variations in atomic density which would degrade the bunch shape are measured using the imaging techniques developed. Adjustment of the excitation laser intensity to compensate for atomic density is shown to produce uniform bunches in two dimensions. Quantitative analysis of the acuity of the bunch edge provides an upper limit to the electron temperature of T = 35 K. Unlike photoemission sources, the electron bunch shaping mechanism demonstrated here can easily be generalised to three dimensions. In addition, field ionisa- tion of Rydberg atoms is observed to play an important role in the ionisation process, and suggested as a future avenue of research.

•Jan 1, 2010•1 citation

Compact ultracold electron source based on a grating magneto-optical trap

J. G. H. Franssen, T. C. H. de Raadt, M. A. W. van Ninhuijs +1 more

The ultrafast and ultracold electron source, based on near-threshold photoionization of a laser-cooled and trapped atomic gas, offers a unique combination of low transverse beam emittance and high bunch charge.Its use is however still limited because of the required cold-atom laser-cooling techniques.Here we present a compact ultracold electron source based on a grating magneto-optical trap (GMOT), which only requires one trapping laser beam that passes through a transparent accelerator module.This makes the technique more widely accessible and increases its applicability.We show the GMOT can be operated with a hole in the center of the grating and with large electric fields applied across the trapping region, which is required for extracting electron bunches.The calculated values of the applied electric field were found to agree well with measured Stark shifts of the laser cooling transition.The electron beams extracted from the GMOT have been characterized.Beam energies up to 10 keV were measured using a time-of-flight method.The normalized root-mean-squared transverse beam emittance was determined using a waist scan method, resulting in ϵ ¼ 1.9 nm rad.The root-mean-squared transverse size of the ionization volume is 30 μm or larger, implying an electron source temperature in the few-10 K range, 2-3 orders of magnitude lower than conventional electron sources, based on photoemission or thermionic emission from solid state surfaces.

arXiv:1806.10504•Physical Review Accelerators and Beams•Feb 8, 2019•43 citations
Abstract We report the generation of multiple electron beams using a cold atom electron source (CAES) combined with a spatial light modulator (SLM). In the experiment, neutral 87Rb{ }^{87} \mathrm{Rb}87Rb atoms are confined in a magneto-optical trap and cooled to approximately 700μ K700 \mu \mathrm{~K}700μ K. By shaping the intensity profile of the excitation laser via the SLM, the spatial distribution of the excited atoms can be precisely controlled. The excited atoms are then ionized by a dye laser, and the ionized electrons are extracted and focused by an electric field to form multiple electron beams. As a demonstration, we generate regular arrays of 3×3,4×4,5×5,6×63 \times 3,4 \times 4,5 \times 5,6 \times 63×3,4×4,5×5,6×6 beams, each with a spot size of about 100μ m100 \mu \mathrm{~m}100μ m and a normalized transverse emittance of ∼0.4×10−9 m⋅rad⋅eV\sim 0.4 \times 10^{-9} \mathrm{~m} \cdot \mathrm{rad} \cdot \sqrt{\mathrm{eV}}∼0.4×10−9 m⋅rad⋅eV​. This programmable electron beam technique holds potential for applications in electron-beam lithography and wafer inspection.
We report a programmable multiple ion beam system developed by combing a magneto-optical trap ion source with a spatial light modulator (SLM). Neutral rubidium atoms are trapped into a magneto-optical trap and cooled to 700 μK. An excitation laser beam, the intensity distribution of which is shaped into a square array by the SLM, selectively excites the cold atoms, which are subsequently ionized by an ionization laser beam. The ions are then extracted by an electric field to produce multiple ion beams. A 3×3 ion beam array has been generated. The size of each beams is 180 μm, and the transversal reduced emittance of multiple ion beams at the source is evaluated to be 1.65 × 10−9 m radeV. We also demonstrate the generation of ion bunches with a user-defined spatial pattern. In the future, by integrating this programmable multiple ion beam system with high reduction ion optics, it is possible to generate nanoscale multiple focused ion beams for the potential applications in maskless patterning and direct writing lithography.
The authors describe a new method for creating a high quality focused ion beam using laser-cooled neutral atoms in a magneto-optical trap as an ion source. They show that this new technique can provide spot resolutions and brightness values that are better than the state of the art in focused ion beams. The source can be used with a range of different ionic species and can be combined with laser cooling techniques to exert unprecedented control over the ion emission, for example, producing single ions “on demand.” The beam quality is a result of a high brightness and a narrow energy distribution, both of which stem from the cold temperature (≈100μK) of the atoms. The ions are produced by subjecting the cold neutral atoms to a photoionization laser, after which they become a compact source of nearly monoenergetic ions. With the application of a potential gradient, the ions form a beam that can be focused via standard ion optical techniques. They discuss estimations based on the initial size of the ion cloud and the energy distribution and show that the resulting beam has a low emittance.
This thesis presents details of a new type of cold atom electron source (CAES) that uses an alternating current magneto-optical trap (AC-MOT). Cold atom electron sources produce electron bunches by threshold photoionisation from a population of laser-cooled atoms. The electrons extracted from the atoms are made into a beam which has an ultra-low transverse velocity distribution. The low velocity distribution increases the brightness and reduces the energy spread of the beam, making CAESs potential sources for future electron diffraction and electron spectroscopy studies. The newly commissioned source detailed here produces focused electron bunches with characteristic temperatures as low as 12.6 ± 0.8 K, at a rate of up to 10 Hz, and with a bunch charge of 2.2±0.2fC, comparable to other state-of-the-art cold atom electron sources. The AC-MOT CAES can also produce cold bunches with energies <200 eV, which is lower than has previously been reported for this type of source. The electrons originate from a population of laser-cooled 85Rb atoms held in an AC- MOT. The AC-MOT CAES design allows the magnetic trapping fields to be switched to zero in 32 μs, more than �ˆ�175 times faster than is possible using a comparable DC-MOT source. This means that electron bunches can be created and extracted in a magnetic field-free environment without any reduction in trap density and hence bunch charge, as occurs in conventional DC-MOT sources. The design, development, characterisation, and operation of the systems needed for the new AC-MOT CAES are detailed in this thesis. This includes details of the atom trapping system, the photoionisation system, the electron extraction system and the various timing systems for creation and characterisation of the resultant cold electron bunches. Finally, the characterisation of the AC-MOT CAES itself is presented, and the measured beam metrics are used to compare the new AC-MOT CAES with other CAES designs which are under development.
The evolving field of nanofabrication demands that more precise fabrication and evaluation tools be developed. We describe a method for creating a high quality focused ion beam with enhanced capabilities using an ion source based on laser-cooled neutral atoms in a magneto-optical trap. This technique will improve resolution and brightness beyond the current state of the art, can be used with the full range of atomic species that can be laser cooled and trapped, and will allow unprecedented control over the ion emission, allowing, for example, the production of single ions ``on demand.'' We give estimates for the emittance and present a realistic ray tracing analysis of a basic focusing system demonstrating the feasibility of focusing the beam to a spot size of less than 10nm10\phantom{\rule{0.3em}{0ex}}\mathrm{nm}10nm.
This thesis presents the development of a new apparatus, and imaging tech- niques, used to produce shaped cold electron bunches from ultracold plasma (UCP). Due to their low temperature, cold electron bunches from UCP have the potential to provide a compact electron source with sufficient brightness and coherence to enable single-shot ultrafast diffractive imaging of nano-scale samples, such as bio-molecules. To create the electron bunch, a cold (70 μK) cloud of 108 rubidium-85 atoms was prepared in a magneto optical trap (MOT). Some of the atoms were excited to an intermediate state using a laser with a spatially varying in- tensity profile, then ionised by a second laser pulse. The shaped excitation laser allowed two-dimensional control of the electron density. The ionisation laser could, in principle, also be spatially varying, to allow three dimensional manipulation of the electron bunch shape. Due to Coulomb repulsion betweeen electrons within a bunch, the brightness of the source is critically dependent on its initial shape, and therefore the shape of the atom cloud. Uniform density bunches are particularly desirable due to their linear space-charge expansion. To optimise the source through production of uniform bunches, knowledge of the spatial density distribution of atoms in the cloud is required. Conventional imaging techniques for cold atoms are either technically demanding or destructive to the atom cloud, and are unsuitable for this application, providing direct motivation for the development of new methods. I have developed two new imaging techniques for use in shaped electron bunch production. The new techniques are particularly suited to our application, but are applicable to the cold atom research community in general, offer- ing several advantages over conventional methods. The first method adapts a phase-contrast imaging technique to measure the spatial distribution of atoms in a specific excited state. The second approach allows single-shot imaging of inhomogeneous atom clouds; that is, where both the density and refractive index may be spatially varying. The method uses a perturbative approach in conjunction with phase retrieval based on the transport of in- tensity equation. This technique is also potentially valuable for studies of atomic coherence effects in cold atoms and was demonstrated using spatially modulated electromagnetically induced transparency. In collaboration with other members of our research group and in parallel with the imaging research, I also designed and constructed a new appara- tus to produce UCP. The experiment first produced electron bunches in late 2009, and using the imaging techniques I developed, the results of the first shaped electron bunches from UCP are presented here. Due to the low tem- perature of the electrons, such shaped bunches can only be produced and observed using a cold electron source. Conventional thermal sources, includ- ing photoemission and field emission sources, produce hot electrons whose high temperature immediately diffuses any initial structure. The effects of increased electron temperature on the quality of the bunch shape are inves- tigated here, resulting in the conclusion that cold electrons are essential for observing, and thus optimising, shaped bunches. Arbitrarily shaped bunches are demonstrated for the first time, using an intensity shaped excitation laser beam followed by uniform ionisation of the excited atom distribution. The laser intensity profile is adjusted using a spatial light modulator (SLM). Variations in atomic density which would degrade the bunch shape are measured using the imaging techniques developed. Adjustment of the excitation laser intensity to compensate for atomic density is shown to produce uniform bunches in two dimensions. Quantitative analysis of the acuity of the bunch edge provides an upper limit to the electron temperature of T = 35 K. Unlike photoemission sources, the electron bunch shaping mechanism demonstrated here can easily be generalised to three dimensions. In addition, field ionisa- tion of Rydberg atoms is observed to play an important role in the ionisation process, and suggested as a future avenue of research.
The ultrafast and ultracold electron source, based on near-threshold photoionization of a laser-cooled and trapped atomic gas, offers a unique combination of low transverse beam emittance and high bunch charge.Its use is however still limited because of the required cold-atom laser-cooling techniques.Here we present a compact ultracold electron source based on a grating magneto-optical trap (GMOT), which only requires one trapping laser beam that passes through a transparent accelerator module.This makes the technique more widely accessible and increases its applicability.We show the GMOT can be operated with a hole in the center of the grating and with large electric fields applied across the trapping region, which is required for extracting electron bunches.The calculated values of the applied electric field were found to agree well with measured Stark shifts of the laser cooling transition.The electron beams extracted from the GMOT have been characterized.Beam energies up to 10 keV were measured using a time-of-flight method.The normalized root-mean-squared transverse beam emittance was determined using a waist scan method, resulting in ϵ ¼ 1.9 nm rad.The root-mean-squared transverse size of the ionization volume is 30 μm or larger, implying an electron source temperature in the few-10 K range, 2-3 orders of magnitude lower than conventional electron sources, based on photoemission or thermionic emission from solid state surfaces.