We have excited helium atoms from their metastable 2 3S state to Rydberg states in the range 13<n<50 in a two-step process via the 3 3P state using light at $\ensuremath{\lambda}=389$ nm and 785--815 nm. Atoms in a thermal beam (100 K) cross partially overlapping laser beams of the appropriate frequencies in the counterintuitive order to exploit the high efficiency of stimulated rapid adiabatic passage. The interaction region is between two plates that can be used for Stark tuning in a few V/cm field or for field ionization. At fields much too low for field ionization, we observe signals attributed to ionization by blackbody radiation. Multiple tests confirm this attribution as the cause of ionization. For example, by heating the plates we observe the expected signal increases. Our experiments reinforce previous work where the interaction between Rydberg atoms and room temperature blackbody radiation is important for experiments.
Abstract We report the generation of multiple electron beams using a cold atom electron source (CAES) combined with a spatial light modulator (SLM). In the experiment, neutral 87Rb atoms are confined in a magneto-optical trap and cooled to approximately 700μK. By shaping the intensity profile of the excitation laser via the SLM, the spatial distribution of the excited atoms can be precisely controlled. The excited atoms are then ionized by a dye laser, and the ionized electrons are extracted and focused by an electric field to form multiple electron beams. As a demonstration, we generate regular arrays of 3×3,4×4,5×5,6×6 beams, each with a spot size of about 100μm and a normalized transverse emittance of ∼0.4×10−9m⋅rad⋅eV. This programmable electron beam technique holds potential for applications in electron-beam lithography and wafer inspection.