Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

InTech eBooks

Effective Models of Superconducting Quantum Interference Devices

R. De

Published Oct 17, 2012• 0 citations
Publisher

Abstract

It is well known that the electrodynamic properties of SQUIDs (Superconducting Quantum Interference Devices) are obtained by means of the dynamics of the Josephson junctions in these superconducting system (Barone & Paterno, 1982; Likharev, 1986; Clarke & Braginsky, 2004). Due to the intrinsic macroscopic coherence of superconductors, r. f. SQUIDs have been proposed as basic units (qubits) in quantum computing (Bocko et al., 1997). In the realm of quantum computing non-dissipative quantum systems with small (or null) inductance parameter and finite capacitance of the Josephson junctions (JJs) are usually considered (Crankshaw & Orlando, 2001). The mesoscopic non-simply connected classical devices, on the other hand, are generally operated and studied in the overdamped limit with negligible capacitance of the JJs and small (or null) values of the inductance parameter. Nonetheless, r. f. SQUIDs find application in a large variety of fields, from biomedicine to aircraft maintenance (Clarke & Braginsky, 2004), justifying actual scientific interest in them.

DOI
10.5772/48483

Related papers

Josephson Junctions

Daniel D. Stancil, Gregory T. Byrd

The device that is the workhorse of most superconducting computers is the Josephson Junction, which consists of two superconducting regions separated by a non-superconducting layer—usually an insulator. In this chapter, the authors begin with a basic discussion of tunneling. They use a phenomenological approach to model the coupling between the superconductors in a Josephson junction resulting from the tunneling of Cooper pairs. A qubit can also be formed by placing two Josephson junctions in parallel. This configuration is referred to as a Superconducting Quantum Interference Device, or SQUID. By biasing the Josephson junction with different currents, it can also be used to realize a time-varying inductance that is used in low noise parametric amplifiers. Finally, when two junctions are placed in parallel, the effective inductance can be varied by the application of a magnetic field. This makes it possible to realize tunable qubits.

Wiley eBooks•Apr 5, 2022•0 citations

Static characteristics of superconducting quantum interference devices utilizing the equivalent inductance of Josephson junctions

Yoshinao Mizugaki, Koji Nakajima

It is necessary to miniaturize inductors for large-scale integration of Josephson devices. Utilizing the equivalent inductance of Josephson junctions is one promising method to realize small inductors. In this paper we calculate the static characteristics of some superconducting quantum interference devices (SQUIDs) utilizing the equivalent inductance, and we compare the results with those of SQUIDs employing the normal inductors. We also discuss the current distribution before and after the transition of the gate junctions. © 1998 Scripta Technica, Electron Comm Jpn Pt 2, 81(6): 1–7, 1998

Electronics and Communications in Japan (Part II Electronics)•Jun 1, 1998•0 citations

Introduction

Yi Zhang, Hui Dong, Hans‐Joachim Krause +2 more

According to the type of superconducting material used, Superconducting QUantum Interference Devices (SQUID) can be divided into two groups: the low-temperature superconducting and the high-temperature superconducting SQUID. Josephson junction (JJ) is the key element of SQUIDs. JJs are analyzed with the resistively and capacitively shunted junction (RCSJ) model, thus introducing two important parameters: the Stewart–McCumber parameter and the thermal rounding parameter. For readout electronics, the DC SQUID is regarded as dynamic resistance Rd modulated by the flux threading into the SQUID loop. In the case of a direct readout scheme where the SQUID directly connects to a preamplifier, the electronics noise is usually much larger than the SQUID intrinsic noise. The techniques of additional positive feedback, bias current feedback, and noise cancellation are categorized and discussed. This chapter introduces two special DC SQUID readout schemes, the two-stage scheme and the double relaxation oscillation (DROS) scheme.

Wiley eBooks•May 29, 2020•0 citations

Nanobridge superconducting quantum interference devices: Beyond the Josephson limit

Dibyendu Hazra

Nanoscale superconducting quantum interference devices (nano-SQUIDS) where the weak links are made from nanobridges, i.e., nanobridge SQUIDs (NBSs), are one of the most sensitive magnetometers for nanoscale magnetometry. Because of very strong nonlinearity in the nanobridge-electrode joints, the applied magnetic flux (${\mathrm{\ensuremath{\Phi}}}_{a}$)--critical current (${I}_{c}$) characteristics of NBSs differ very significantly from conventional tunnel-junction SQUIDs, especially when the nanobridges are long and/or the screening parameter is large. However, in most of the theoretical descriptions, NBSs have been treated as the conventional tunnel-junction SQUIDs, which are based on the dc Josephson effect. Here, I present a model demonstrating that for long nanobridges and/or large screening parameters the ${I}_{c}({\mathrm{\ensuremath{\Phi}}}_{a})$ of a NBS can be explained by merely considering the fluxoid quantization in the NBS loop and the energy of the NBS; it is not necessary to take the Josephson effect into consideration. I also demonstrate that using the model, one can derive useful expressions such as the modulation depth and transfer function. I discuss the role of the kinetic inductance fraction ($\ensuremath{\kappa}$) in determining ${I}_{c}({\mathrm{\ensuremath{\Phi}}}_{a})$. I compare the predictions of the present model with the experimental data already published by several groups.

arXiv:1809.09510•Physical review. B./Physical review. B•Apr 5, 2019•11 citations

Electrodynamics of Josephson Junctions and Circuits

Shuai Zhou

The concept of quantum-mechanical tunneling of a particle through a potential barrier was known already in the 1920s. The discovery of tunneling of electron pairs across a superconductor–insulator–superconductor (SIS) junction was made by Josephson in 1962 and experimentally confirmed first by Anderson and Rowell in 1963. The phenomenon of that the electron-pair tunneling may produce a dissipationless current which may flow at zero bias voltage opened not only a new chapter in solid-state physics, but also provided a wide variety of stimulating applications. In this chapter, we introduce the phenomenology of the Josephson effect, formulate the electrodynamics of the Josephson junctions, and outline some circuits of practical interest. Some electrodynamic analyses are given to superconducting quantum interference devices (SQUIDs). A brief discussion about the possible use of SQUIDs and about the physical limits of various switching technologies in comparison with the superconducting electronic technology is also provided at the end of this chapter.

Wiley eBooks•Jul 9, 1999•0 citations

Dynamic properties of a superconducting quantum interference device containing arrays of Josephson junctions

Marian Darula, P. Seidel, F. H. Busse +1 more

The dynamic properties of a superconducting quantum interference device (SQUID) containing arrays of Josephson junctions in a superconducting loop, and in particular the case of a four-junction SQUID, is analyzed theoretically via computer simulations. It is shown that phase locking of Josephson junctions determines the dynamic behavior of the SQUID. In the case of a stable phase-lock state hysteretic I-V curves as well as unusual voltage-flux dependencies appear. The influence of a small spread in the Josephson junction parameters upon the stability of the phase-lock state is investigated in parameter space.

Journal of Applied Physics•Aug 15, 1993•20 citations
It is well known that the electrodynamic properties of SQUIDs (Superconducting Quantum Interference Devices) are obtained by means of the dynamics of the Josephson junctions in these superconducting system (Barone & Paterno, 1982; Likharev, 1986; Clarke & Braginsky, 2004). Due to the intrinsic macroscopic coherence of superconductors, r. f. SQUIDs have been proposed as basic units (qubits) in quantum computing (Bocko et al., 1997). In the realm of quantum computing non-dissipative quantum systems with small (or null) inductance parameter and finite capacitance of the Josephson junctions (JJs) are usually considered (Crankshaw & Orlando, 2001). The mesoscopic non-simply connected classical devices, on the other hand, are generally operated and studied in the overdamped limit with negligible capacitance of the JJs and small (or null) values of the inductance parameter. Nonetheless, r. f. SQUIDs find application in a large variety of fields, from biomedicine to aircraft maintenance (Clarke & Braginsky, 2004), justifying actual scientific interest in them.
The device that is the workhorse of most superconducting computers is the Josephson Junction, which consists of two superconducting regions separated by a non-superconducting layer—usually an insulator. In this chapter, the authors begin with a basic discussion of tunneling. They use a phenomenological approach to model the coupling between the superconductors in a Josephson junction resulting from the tunneling of Cooper pairs. A qubit can also be formed by placing two Josephson junctions in parallel. This configuration is referred to as a Superconducting Quantum Interference Device, or SQUID. By biasing the Josephson junction with different currents, it can also be used to realize a time-varying inductance that is used in low noise parametric amplifiers. Finally, when two junctions are placed in parallel, the effective inductance can be varied by the application of a magnetic field. This makes it possible to realize tunable qubits.
It is necessary to miniaturize inductors for large-scale integration of Josephson devices. Utilizing the equivalent inductance of Josephson junctions is one promising method to realize small inductors. In this paper we calculate the static characteristics of some superconducting quantum interference devices (SQUIDs) utilizing the equivalent inductance, and we compare the results with those of SQUIDs employing the normal inductors. We also discuss the current distribution before and after the transition of the gate junctions. © 1998 Scripta Technica, Electron Comm Jpn Pt 2, 81(6): 1–7, 1998
According to the type of superconducting material used, Superconducting QUantum Interference Devices (SQUID) can be divided into two groups: the low-temperature superconducting and the high-temperature superconducting SQUID. Josephson junction (JJ) is the key element of SQUIDs. JJs are analyzed with the resistively and capacitively shunted junction (RCSJ) model, thus introducing two important parameters: the Stewart–McCumber parameter and the thermal rounding parameter. For readout electronics, the DC SQUID is regarded as dynamic resistance Rd modulated by the flux threading into the SQUID loop. In the case of a direct readout scheme where the SQUID directly connects to a preamplifier, the electronics noise is usually much larger than the SQUID intrinsic noise. The techniques of additional positive feedback, bias current feedback, and noise cancellation are categorized and discussed. This chapter introduces two special DC SQUID readout schemes, the two-stage scheme and the double relaxation oscillation (DROS) scheme.
Nanoscale superconducting quantum interference devices (nano-SQUIDS) where the weak links are made from nanobridges, i.e., nanobridge SQUIDs (NBSs), are one of the most sensitive magnetometers for nanoscale magnetometry. Because of very strong nonlinearity in the nanobridge-electrode joints, the applied magnetic flux (${\mathrm{\ensuremath{\Phi}}}_{a}$)--critical current (Ic{I}_{c}Ic​) characteristics of NBSs differ very significantly from conventional tunnel-junction SQUIDs, especially when the nanobridges are long and/or the screening parameter is large. However, in most of the theoretical descriptions, NBSs have been treated as the conventional tunnel-junction SQUIDs, which are based on the dc Josephson effect. Here, I present a model demonstrating that for long nanobridges and/or large screening parameters the ${I}_{c}({\mathrm{\ensuremath{\Phi}}}_{a})$ of a NBS can be explained by merely considering the fluxoid quantization in the NBS loop and the energy of the NBS; it is not necessary to take the Josephson effect into consideration. I also demonstrate that using the model, one can derive useful expressions such as the modulation depth and transfer function. I discuss the role of the kinetic inductance fraction ($\ensuremath{\kappa}$) in determining ${I}_{c}({\mathrm{\ensuremath{\Phi}}}_{a})$. I compare the predictions of the present model with the experimental data already published by several groups.
The concept of quantum-mechanical tunneling of a particle through a potential barrier was known already in the 1920s. The discovery of tunneling of electron pairs across a superconductor–insulator–superconductor (SIS) junction was made by Josephson in 1962 and experimentally confirmed first by Anderson and Rowell in 1963. The phenomenon of that the electron-pair tunneling may produce a dissipationless current which may flow at zero bias voltage opened not only a new chapter in solid-state physics, but also provided a wide variety of stimulating applications. In this chapter, we introduce the phenomenology of the Josephson effect, formulate the electrodynamics of the Josephson junctions, and outline some circuits of practical interest. Some electrodynamic analyses are given to superconducting quantum interference devices (SQUIDs). A brief discussion about the possible use of SQUIDs and about the physical limits of various switching technologies in comparison with the superconducting electronic technology is also provided at the end of this chapter.
The dynamic properties of a superconducting quantum interference device (SQUID) containing arrays of Josephson junctions in a superconducting loop, and in particular the case of a four-junction SQUID, is analyzed theoretically via computer simulations. It is shown that phase locking of Josephson junctions determines the dynamic behavior of the SQUID. In the case of a stable phase-lock state hysteretic I-V curves as well as unusual voltage-flux dependencies appear. The influence of a small spread in the Josephson junction parameters upon the stability of the phase-lock state is investigated in parameter space.