Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Atom interferometry with phase-masked optical fields

Ying Tan

Published Jan 1, 2002• 0 citations
OpenAlex

Abstract

We have investigated the use of two-photon induced spin excitation for applications to atom interferometry for lithography and rotation sensing. Our efforts have been grouped into two parts: theoretical study of schemes for nanolithography, and experimental investigation of novel schemes for rotation sensing. For lithography, we have concentrated on designing and studying theoretical models that would allow the creation of two-dimensional lithographic patterns with nanometer scale features. Specifically, We have developed a theoretical model for realizing a two-dimensional interferometer capable of producing periodic structures with a feature size of less than 10 nm. Fundamentally, this process uses the two-photon induced spin excitation for splitting atomic waves. We first extended this model to achieve a large degree of splitting via use of multiple pulses, and then showed how the process can be generalized to two orthogonal dimensions with independent controls. We have also designed a scheme for producing arbitrary two-dimensional features using atom interferometry. This process makes use of a phase mask imprinted on a laser pulse, guiding of atomic waves, and atom interferometry in order to produce any desired pattern, with features that can also be only a few nm's in size. For rotation sensing, we have realized experimentally a novel scheme that opens up a new way of controlling the interferometer contour. It may prove to be very robust for practical applications such as gravity gradiometry as well.

Related papers

Large-Angle, Single-Order, One and Two-Dimensional Atomic Interferometry for Creation of Nanostructures

M. S. Shahriar, Tanya Zelevinsky, Philip Hemmer

We have shown via explicit analysis as well as numerical simulation the design of two large angle interferometers employing two-photon pulses. The first one uses the technique of adiabatic following in a dark state to produce a large splitting angle atomic interferometer that is capable of producing one dimensional gratings with spacings as small as 2 nm. Unlike other large angle interferometers, this technique is not sensitive to errors in optical pulse area and decoherence from excited state decay. This may lead to a nearly two orders of magnitude improvement in the sensitivity of devices such as atomic gyroscopes, which are already as good as the best laser gyroscopes. The second interferometer uses the technique of Raman pulses to produce a two-dimensional interferometer, with independent choice of grating spacings in each direction, each being as small as 2 nm. This scheme may enable one to produce uniform arrays of quantum dots with dimensions of only a few nm on each side. In addition, it may be possible to generalize this process to produce arbitrary patterns with the same type of resolution.

arXiv:quant-ph/0007097•Jul 26, 2000•2 citations

Two-dimensional nanolithography using atom interferometry

Adil A. Gangat, Prabhakar Pradhan, G. S. Pati +1 more

We propose a scheme for the lithography of arbitrary, two-dimensional nanostructures via matter-wave interference. The required quantum control is provided by a $\ensuremath{\pi}∕2\text{\ensuremath{-}}\ensuremath{\pi}\text{\ensuremath{-}}\ensuremath{\pi}∕2$ atom interferometer with an integrated atom lens system. The lens system is developed such that it allows simultaneous control over the atomic wave-packet spatial extent, trajectory, and phase signature. We demonstrate arbitrary pattern formations with two-dimensional $^{87}\mathrm{Rb}$ wave packets through numerical simulations of the scheme in a practical parameter space. Prospects for experimental realizations of the lithography scheme are also discussed.

arXiv:quant-ph/0404158•Physical Review A•Apr 12, 2005•6 citations

Generation of Arbitrary Lithographic Patterns and Three-Dimensional Atomic Holograms Using BEC Interferometry

Mohamed F. Fouda, Renpeng Fang, Mehjabin Sultana Monjur +2 more

We describe two applications for Bose-Einstein Condensate (BEC) based atomic interferometry: generation of arbitrary lithographic patterns and three dimensional atomic holograms, using light shift induced phase masks generated from optical interferometry and digital holography.

Frontiers in Optics•Jan 1, 2013•0 citations

Atom interferometers

J. Lone, K. Sengstock, Wolfgang A. Ertmer

Summary form only given.Atom interferometers have opened up new areas of fundamental and applied research. As well known from photon optics, multiple-beam interferometers offer an increased sensitivity on the relative phases between interfering waves. Very recently, first atomic multiple-beam interferometers were realized. These concepts are based on an atomic beam that is spatially split into coherent partial de Broglie waves, where the number of interfering waves is determined by the internal atomic multi-level scheme. We report on time-domain atomic interferometry within a two-level system.

Conference on Lasers and Electro-Optics•Nov 27, 2002•0 citations

Dual atomic interferometry for differential inertial sensing

Jianing Li

The utilization of light-pulse atom interferometry presents a valuable technique that has found application in both fundamental scientific inquiries, such as investigating constants such as measurements of fine structure constant α and gravitational constant G, and practical endeavors including acceleration sensing and rotation measurements. This thesis delves into our implementation of a dual atom interferometer design involving the clock transition 1S0 → 3P0 in strontium, concurrently conducting the interferometric sequence on atoms in both ground and excited states. To facilitate the dual atom interferometer’s operation, we have firstly established a compact experimental setup with a transversely loaded bi-dimensional magneto-optical-trap (2D-MOT) to create a high flux source of cold strontium atoms. Introducing a novel cross-polarized bi-color atomic beam slower, we simultaneously addresses two excited Zeeman substates of the transition 1S0 → 1P1 in strontium-88, significantly enhancing the number of atoms prepared in the 461 nm MOT by around 10-fold. Following the 461 nm MOT, the atomic ensemble undergoes cooling in a 689 nm MOT, achieving atomic temperatures below 1 µK. We also install a network of eight magnetic field probes arranged around the cold atomic sample, enabling precise three-axis active control of magnetic fields down to the milligauss level. With the atoms confined in a 2D lattice at the magic-wavelength of 813.427 nm after the initial preparation phase, we conduct the magnetically-induced clock transition to create a statistical mixture state of ground and excited states. After a velocity selection stage, implementing a Mach-Zehnder interferometer with Bragg pulses operating at the magic-wavelength along the vertical axis, we conduct tests of the weak equivalence principle (WEP). The Eötvös ratio we found in our system stood at (1.8 ± 3.1) × 10−4, mainly limited by the finite temperature of the atomic cloud constraining the interrogation time. Furthermore, the dual atom interferometer scheme enables the measurement of state-dependent force and eventually polarizability difference via the phase shift between the atoms in different states, and we experimentally demonstrate this by introducing an additional light field gradient.

•Jan 1, 2023•0 citations

Generation of arbitrary lithographic patterns using Bose-Einstein-condensate interferometry

Mohamed F. Fouda, Renpeng Fang, John B. Ketterson +1 more

We propose an arbitrary pattern lithography process using interference of Bose-Einstein condensates (BECs). A symmetric three-pulse Raman atom interferometer (AI) is used to implement the system. The pattern information, in the form of a phase-only mask, is optically encoded into the BEC order parameter in one of the AI arms. The lithographic pattern is represented by a two-dimensional intensity variation, and is transformed into a two-dimensional phase variation in the BEC order parameter via the use of ac-Stark shift induced by a pulsed laser field. The BEC probability distribution of the interference result at the end of the AI is proportional to the required pattern. In order to produce features smaller than the diffraction limit for the used optical elements, we employ a three-dimensional atomic lens system to scale down the resulting pattern. The operating conditions for this lens structure are investigated in order to identify practical constraints. Simulations of the overall system using the parameters of $^{87}\mathrm{Rb}$ BEC were performed to illustrate its functionality. The proposed process, while perhaps not suitable for general purpose usage, may enable the creation of special purpose patterns on a very small scale, with features as small as a few nanometers.

Physical Review A•Dec 28, 2016•9 citations
We have investigated the use of two-photon induced spin excitation for applications to atom interferometry for lithography and rotation sensing. Our efforts have been grouped into two parts: theoretical study of schemes for nanolithography, and experimental investigation of novel schemes for rotation sensing. For lithography, we have concentrated on designing and studying theoretical models that would allow the creation of two-dimensional lithographic patterns with nanometer scale features. Specifically, We have developed a theoretical model for realizing a two-dimensional interferometer capable of producing periodic structures with a feature size of less than 10 nm. Fundamentally, this process uses the two-photon induced spin excitation for splitting atomic waves. We first extended this model to achieve a large degree of splitting via use of multiple pulses, and then showed how the process can be generalized to two orthogonal dimensions with independent controls. We have also designed a scheme for producing arbitrary two-dimensional features using atom interferometry. This process makes use of a phase mask imprinted on a laser pulse, guiding of atomic waves, and atom interferometry in order to produce any desired pattern, with features that can also be only a few nm's in size. For rotation sensing, we have realized experimentally a novel scheme that opens up a new way of controlling the interferometer contour. It may prove to be very robust for practical applications such as gravity gradiometry as well.
We have shown via explicit analysis as well as numerical simulation the design of two large angle interferometers employing two-photon pulses. The first one uses the technique of adiabatic following in a dark state to produce a large splitting angle atomic interferometer that is capable of producing one dimensional gratings with spacings as small as 2 nm. Unlike other large angle interferometers, this technique is not sensitive to errors in optical pulse area and decoherence from excited state decay. This may lead to a nearly two orders of magnitude improvement in the sensitivity of devices such as atomic gyroscopes, which are already as good as the best laser gyroscopes. The second interferometer uses the technique of Raman pulses to produce a two-dimensional interferometer, with independent choice of grating spacings in each direction, each being as small as 2 nm. This scheme may enable one to produce uniform arrays of quantum dots with dimensions of only a few nm on each side. In addition, it may be possible to generalize this process to produce arbitrary patterns with the same type of resolution.
We propose a scheme for the lithography of arbitrary, two-dimensional nanostructures via matter-wave interference. The required quantum control is provided by a $\ensuremath{\pi}∕2\text{\ensuremath{-}}\ensuremath{\pi}\text{\ensuremath{-}}\ensuremath{\pi}∕2$ atom interferometer with an integrated atom lens system. The lens system is developed such that it allows simultaneous control over the atomic wave-packet spatial extent, trajectory, and phase signature. We demonstrate arbitrary pattern formations with two-dimensional 87Rb^{87}\mathrm{Rb}87Rb wave packets through numerical simulations of the scheme in a practical parameter space. Prospects for experimental realizations of the lithography scheme are also discussed.
Summary form only given.Atom interferometers have opened up new areas of fundamental and applied research. As well known from photon optics, multiple-beam interferometers offer an increased sensitivity on the relative phases between interfering waves. Very recently, first atomic multiple-beam interferometers were realized. These concepts are based on an atomic beam that is spatially split into coherent partial de Broglie waves, where the number of interfering waves is determined by the internal atomic multi-level scheme. We report on time-domain atomic interferometry within a two-level system.
The utilization of light-pulse atom interferometry presents a valuable technique that has found application in both fundamental scientific inquiries, such as investigating constants such as measurements of fine structure constant α and gravitational constant G, and practical endeavors including acceleration sensing and rotation measurements. This thesis delves into our implementation of a dual atom interferometer design involving the clock transition 1S0 → 3P0 in strontium, concurrently conducting the interferometric sequence on atoms in both ground and excited states. To facilitate the dual atom interferometer’s operation, we have firstly established a compact experimental setup with a transversely loaded bi-dimensional magneto-optical-trap (2D-MOT) to create a high flux source of cold strontium atoms. Introducing a novel cross-polarized bi-color atomic beam slower, we simultaneously addresses two excited Zeeman substates of the transition 1S0 → 1P1 in strontium-88, significantly enhancing the number of atoms prepared in the 461 nm MOT by around 10-fold. Following the 461 nm MOT, the atomic ensemble undergoes cooling in a 689 nm MOT, achieving atomic temperatures below 1 µK. We also install a network of eight magnetic field probes arranged around the cold atomic sample, enabling precise three-axis active control of magnetic fields down to the milligauss level. With the atoms confined in a 2D lattice at the magic-wavelength of 813.427 nm after the initial preparation phase, we conduct the magnetically-induced clock transition to create a statistical mixture state of ground and excited states. After a velocity selection stage, implementing a Mach-Zehnder interferometer with Bragg pulses operating at the magic-wavelength along the vertical axis, we conduct tests of the weak equivalence principle (WEP). The Eötvös ratio we found in our system stood at (1.8 ± 3.1) × 10−4, mainly limited by the finite temperature of the atomic cloud constraining the interrogation time. Furthermore, the dual atom interferometer scheme enables the measurement of state-dependent force and eventually polarizability difference via the phase shift between the atoms in different states, and we experimentally demonstrate this by introducing an additional light field gradient.
We propose an arbitrary pattern lithography process using interference of Bose-Einstein condensates (BECs). A symmetric three-pulse Raman atom interferometer (AI) is used to implement the system. The pattern information, in the form of a phase-only mask, is optically encoded into the BEC order parameter in one of the AI arms. The lithographic pattern is represented by a two-dimensional intensity variation, and is transformed into a two-dimensional phase variation in the BEC order parameter via the use of ac-Stark shift induced by a pulsed laser field. The BEC probability distribution of the interference result at the end of the AI is proportional to the required pattern. In order to produce features smaller than the diffraction limit for the used optical elements, we employ a three-dimensional atomic lens system to scale down the resulting pattern. The operating conditions for this lens structure are investigated in order to identify practical constraints. Simulations of the overall system using the parameters of 87Rb^{87}\mathrm{Rb}87Rb BEC were performed to illustrate its functionality. The proposed process, while perhaps not suitable for general purpose usage, may enable the creation of special purpose patterns on a very small scale, with features as small as a few nanometers.