Many applications demand materials with seemingly incompatible optical characteristics. For example, immersion photolithography is a resolution enhancing technique used to fabricate the ever-shrinking nanostructures in integrated circuits but requires a material that has-at the same time--a large index of refraction and negligible optical loss. Other applications require devices that have optical properties that seem exorbitant given the constraints posed by the geometry, materials, and desired performance of these devices. The superconducting nanowire single-photon detector (SNSPD) is one such device that, on the one hand, needs to absorb and detect single telecom-wavelength photons (A = 1.55 pm) with near-perfect efficiency, but on the other hand, has an absorber that is subwavelength in its thickness (A/390). For both cases, it is simply not enough to look for alternative materials with the desired optical properties, because the materials may not exist in nature. In fact, it has become necessary to engineer the optical properties of these devices and materials using other means. In this thesis, we have investigated how the optical properties of materials and devices can be engineered for specific applications. In the first half of the thesis, we focused on theoretical schemes that use subwave-length, resonant constituents to realize a material with interesting optical properties. We proposed a scheme that can achieve high index (n > 6) accompanied with optical gain for an implementation involving atomic vapors. We then explored the applicability of this high-index system to immersion lithography and found that optical gain is problematic. We solved the issue of optical gain by proposing a scheme where a mixture of resonant systems is used. We predicted that this system can yield a high refractive index, low refractive index, anomalous dispersion, or normal dispersion, all with optical transparency. In the second half, we studied the optical properties of SNSPDs through theoretical and experimental methods. In the study, we first constructed a numerical model that predicts the absorptance of our devices. We then fabricated SNSPDs with varying geometries and engineered a preprocessing-free proximity-effect correction technique to realize uniform linewidths. We then constructed an optical apparatus to measure the absorptance of our devices and showed that the devices are sensitive to the polarization of single photons.
Many applications demand materials with seemingly incompatible optical characteristics. For example, immersion photolithography is a resolution enhancing technique used to fabricate the ever-shrinking nanostructures in integrated circuits but requires a material that has-at the same time--a large index of refraction and negligible optical loss. Other applications require devices that have optical properties that seem exorbitant given the constraints posed by the geometry, materials, and desired performance of these devices. The superconducting nanowire single-photon detector (SNSPD) is one such device that, on the one hand, needs to absorb and detect single telecom-wavelength photons (A = 1.55 pm) with near-perfect efficiency, but on the other hand, has an absorber that is subwavelength in its thickness (A/390). For both cases, it is simply not enough to look for alternative materials with the desired optical properties, because the materials may not exist in nature. In fact, it has become necessary to engineer the optical properties of these devices and materials using other means. In this thesis, we have investigated how the optical properties of materials and devices can be engineered for specific applications. In the first half of the thesis, we focused on theoretical schemes that use subwave-length, resonant constituents to realize a material with interesting optical properties. We proposed a scheme that can achieve high index (n > 6) accompanied with optical gain for an implementation involving atomic vapors. We then explored the applicability of this high-index system to immersion lithography and found that optical gain is problematic. We solved the issue of optical gain by proposing a scheme where a mixture of resonant systems is used. We predicted that this system can yield a high refractive index, low refractive index, anomalous dispersion, or normal dispersion, all with optical transparency. In the second half, we studied the optical properties of SNSPDs through theoretical and experimental methods. In the study, we first constructed a numerical model that predicts the absorptance of our devices. We then fabricated SNSPDs with varying geometries and engineered a preprocessing-free proximity-effect correction technique to realize uniform linewidths. We then constructed an optical apparatus to measure the absorptance of our devices and showed that the devices are sensitive to the polarization of single photons.
Polarization sensitivity is an intrinsic characteristic of the superconducting nanowire single-photon detector (SNSPD). It is caused by the periodical meander structure of the SNSPD, and may severely limit the scope of the SNSPD's applications. In this study, we have designed and fabricated a SNSPD with much reduced polarization sensitivity, based on a previously published theoretical result that involves high refractive index compensation materials. Using a home-built broadband automatic measurement system, the device detection efficiencies of the fabricated SNSPD have been measured for wavelengths ranging from 1200 to 1700 nm. The measurement results show that the polarization sensitivity of the fabricated device is greatly reduced, with the device detection efficiencies at 1550 nm being 61% and 56% for cases of parallel and perpendicular polarizations, respectively. The measurement results are in good agreement with the numerical simulations.
Single photon detection advanced rapidly in the last decade. The superconducting nanowire single-photon detector (SNSPD) is an emerging technology, which offers low dark count rates, broadband sensitivity from visible to mid-infrared wavelengths and very high quantum efficiency. All these features are appealing for future emerging applications in remote gas sensing, quantum key distribution and quantum information processing. By enclosing the detector in an optical cavity, tuned to the operating wavelength, the total system detection of the SNSPD is improved. Based on the cavity design, the detector absorption is boosted at the desired experimental wavelength. Devices have been fabricated and tested, in this thesis, with enhanced detection efficiency at near-infrared, infrared and mid-infrared wavelengths. NbTiN detectors fabricated on Ta2O5 / SiO2 distributed Bragg reflectors (DBR) for front-side coupling exhibit a system detection efficiency of ≈ 90% at λ = 940 nm for the best device measured. SNSPDs were also fabricated in NbTiN on metallic mirrors for back-side coupling for 1550 and 2333 nm experimental wavelengths. The first design exhibited a system detection efficiency of ≈ 84.5%, at λ = 1550 nm for the best device measured. The second exhibited low system detection efficiency since the device suffered from unexpectedly high dark count rate mainly due to blackbody radiation at 2.2 K. However, it was possible to measure the timing jitter of this device at 350 mK indicating a FWHM of 84 ps. Another technique to improve the total system detection efficiency of the SNSPD, is by fabricating a hairpin-shaped nanowire atop a single mode waveguide. In this design, photons travel through the waveguide and via evanescent coupling are absorbed in the nanowire. These SNSPD devices have been designed to thread along single mode Si ridge waveguides using a hairpin-shaped nanowire structure, which offers enhanced coupling and absorption efficiency via evanescent coupling. These ultra-thin superconducting MoSi detectors are precisely patterned on top of a single mode Si waveguide (600 nm) with alignment error less than 40 nm. Low temperature electrical and nano-optical characterization was carried out using a two-stage pulse tube (PT) coldhead, using an additional 4He / 3He sorption pump, low vibration characterization of SNSPD devices at 350 mK was carried out. Characterised devices exhibit low dark count rate <5 counts per second and timing jitter of ≈ 83 ps full width half maximum (FWHM) at wavelength (λ) = 1550 nm and at critical current ≈ 30 µA.
The physics of single photons is fascinating, by manipulating them we can observe and probe quantum effects. Doing so requires the fabrication and utilization of single photon sources, of which many types have been developed including quantum dots, trapped atoms and ions, and color centers. On the other end of the experiments, single photon detectors play a role of utmost importance, and while several types of detectors exist, superconducting nanowire single photon detectors are now the state-of-the-art technology. By offering near unity detection efficiency from the ultra-violet to the mid-infrared light spectrum, with negligible noise and excellent time resolution, they made possible many experiments that were previously technologically unfeasible. The same appealing characteristics have found a use in applications outside of the quantum optics framework, with notably light detection and ranging, biomedical imaging or CMOS circuits testing.In this thesis a controlled growth method for tailoring the characteristics of niobium titanium nitride in the framework of superconducting nanowire single photon detectors was developed. Reactive co-sputter deposition of niobium titanium nitride was shown to be a versatile method, both in terms of the degree of control over the material composition, and in the choice of substrates that it allows. Unity internal detection efficiency of detectors at telecom wavelengths was achieved by optimizing the niobium content in the material. The influence of lattice matching on the critical temperatures of films deposited at room temperature was investigated. The fabrication of superconducting nanowire single photon detectors on aluminum nitride-on-sapphire, on lithium niobate nano-waveguides, on gallium arsenide, and the integration on SiN waveguides was achieved. The material was used to fabricate detectors with optimized response for any linear polarization of the incoming photons by using a fractal architecture. Another method was proposed to achieve the same results by encapsulating meandering detectors in a high index dielectric material, resulting in a decrease of the permittivity mismatch between the nanowire material and its surrounding and therefore optimizing the efficiency for both orthogonal linear polarizations.Finally, detectors were fabricated from films developed in this work, and were operated to enable the implementation of polarization-based entanglement distribution in optical fibers in a real-conditions scenario, over a record distance of 96 km. This paves the way for the development of quantum communication networks using existing optical fiber links.
Superconducting devices offer the potential to perform at speeds and detection efficiencies higher than what is possible using conventional technologies (such as semiconducting avalanche photodiodes and photomultiplier tubs) for wavelengths from the ultraviolet to the mid-infrared. As a result, there has been increasing interest in using superconducting optical photon detectors in a variety of applications. There has been significant progress in using these types of detectors in areas of basic research such as quantum information science and quantum optics. These applications require detectors that have extremely low dark count rates, high count rates, and high quantum efficiency. I will begin by describing some of our earlier work on superconducting Transition-Edge Sensor (TES). In particular, I will describe some of the engineering involved in the cryogenic, electrical, and optical packaging so that these devices can be easily coupled into fiber-based optics. I will also describe our recent work on developing superconducting nanowire single photon detectors (SNSPD or SSPD). An SNSPD is an ultra-thin, ultra-narrow (nm scale) superconducting meander that is current biased just below its critical current density. When one or more photon is absorbed, a hot spot is formed that causes the superconductor to develop a resistance and consequently a voltage pulse. At NIST and JPL, we have been developing nanowire detectors using an amorphous alloy of tungsten-silicide. We will describe to construct systems using tungsten-silicide nanowires to achieve high detection efficiency (>90% at 1550nm). I will also describe our work to improve the performance of the device by fabricating multiple nanowires in an electrically parallel structure to implement a superconducting nanowire avalanche photodiode (SNAP)[1]. One example of this type of detector is shown in Fig 1. In this case, there are two tungsten silicide layers separated by a dielectric layer to optimize detection of light for any polarization[2]. In addition, progress on other types of SNAP detectors will be described to increase the signal size from a single photon, reduce the recovery time of the device, and to improve the jitter.
We measured the optical absorptance of superconducting nanowire single photon detectors. We found that 200-nm-pitch, 50%-fill-factor devices had an average absorptance of 21% for normally-incident front-illumination of 1.55-microm-wavelength light polarized parallel to the nanowires, and only 10% for perpendicularly-polarized light. We also measured devices with lower fill-factors and narrower wires that were five times more sensitive to parallel-polarized photons than perpendicular-polarized photons. We developed a numerical model that predicts the absorptance of our structures. We also used our measurements, coupled with measurements of device detection efficiencies, to determine the probability of photon detection after an absorption event. We found that, remarkably, absorbed parallel-polarized photons were more likely to result in detection events than perpendicular-polarized photons, and we present a hypothesis that qualitatively explains this result. Finally, we also determined the enhancement of device detection efficiency and absorptance due to the inclusion of an integrated optical cavity over a range of wavelengths (700-1700 nm) on a number of devices, and found good agreement with our numerical model.
Superconducting nanowire single-photon detectors (SNSPDs) are renowned for their high detection efficiency, low dark count rate, and fast timing resolution, which have emerged as an essential device in quantum technologies, including quantum computing and communication, which also significantly benefits classical applications such as deep-space communication, neuromorphic computing, and light detection and ranging (LiDAR). However, designing and customizing SNSPD into versatile functionalities to satisfy these intensive requirements poses significant challenges, including thin-film deposition, nanofabrication, electrical integration, and light delivery strategies. While prior work has typically optimized individual steps – such as fabrication or characterization – there is a lack of reported systematic, integrated frameworks that span all stages from device design to performance benchmarking. This gap hinders broader adoption of the technology across scientific and industrial communities and limits the rigorous exploration of advanced detection concepts. This thesis aims to establish an end-to-end workflow for the customizable fabrication and comprehensive characterization of superconducting nanowire single-photon detectors, and to demonstrate that such a platform is essential for the investigation of diverse single-photon detection architectures. It begins with the optimization of NbTiN thin-film deposition utilizing an ultrahigh vacuum sputtering system. By systematically identifying and optimizing key deposition parameters, we achieve NbTiN films with targeted superconducting properties along with high uniformity and reproducibility. This fast and reliable workflow establishes a solid foundation for detector fabrication and provides instructions for flexible control over film properties. Furthermore, effective nanofabrication protocols for the high-quality SNSPDs were elaborated, along with the specialized cryogenic packaging techniques for reliable electrical and optical integration. The achieved devices demonstrated performance metrics comparable to commercial systems. The implementation of this full fabrication—characterization cycle also enabled flexible exploration of advanced detector architectures. For example, we investigated superconducting microbridge single-photon detectors (SMSPDs) as a complementary platform, demonstrating a fivefold enhancement in signal-to-noise ratio and a tenfold reduction in recovery time relative to conventional SNSPDs. These results provide quantitative insight into detector design trade-offs. Within this framework, photon-number-resolving (PNR) detection using SNSPDs was further investigated as an essential function for advanced quantum and classical applications. We presented innovative detector architectures—interleaved multi-pixel arrays and multilayer coherent absorption structures—to overcome limitations inherent in conventional multiplexing methods, such as nonuniform detection, temporal degradation, and crosstalk. An interleaved multi-pixel SNSPD array with up to four-photon resolution was achieved with uniform detection, as well as a multilayer architecture based on coherent absorption with uniform and near-unity absorption efficiency. Importantly, a theoretical comparison between these two architectures was conducted to evaluate their absorption efficiency and PNR performance, offering insights into structural optimization and device scalability for advanced PNR detectors. Overall, this thesis establishes a fully in-house SNSPD fabrication and characterization capability, providing a robust foundation for the development, customization, and evaluation of high-performance superconducting single-photon detectors. This platform enables reproducible design optimization, quantitative performance benchmarking, and systematic exploration of detector architectures. By integrating fabrication, characterization, and architectural innovation within a consistent workflow, it facilitates both fundamental investigation and application-driven advancement of single-photon detection technologies in our laboratory and the broader research community in Singapore.