Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2602.08869 · Applied Physics Letters

A cavity-mediated reconfigurable coupling scheme for superconducting qubits

Shinyoung Hwang, Sangyeon Lee, Eunjong Kim

quant-phSubmitted Feb 9, 2026• Announced Feb 10, 2026• 0 citations
arXivHTMLPDF

Abstract

Superconducting qubits have achieved remarkable progress in gate fidelity and coherence, yet their typical nearest-neighbor connectivity presents constraints for implementing complex quantum circuits. Here, we introduce a cavity-mediated coupling architecture in which a shared cavity mode, accessed through tunable qubit-cavity couplers, enables dynamically reconfigurable interactions between non-adjacent qubits. By selectively activating the couplers, we demonstrate that high-fidelity iSWAP and CZ gates can be performed within 50 ns with simulated coherent error below $10^{-4}$, while residual $ZZ$ interaction during idling remains below a few kilohertz. Extending to a four-qubit system, we also simulate gates between every qubit pair by selectively enabling the couplers with low qubit crosstalk. This approach provides a practical route toward enhanced interaction flexibility in superconducting quantum processors and may serve as a useful building block for devices that benefit from selective non-local coupling.

Related papers

Tailoring Tunable Interactions in Superconducting Circuits Using Many to No Modes

Gihwan Kim

Tunable couplings are a central requirement for scalable quantum processing with superconducting quantum circuits. Practical quantum processors must dynamically reconfigure their interaction landscape to accommodate different quantum operations, including idle, single-qubit gates, two-qubit gates, readout, and reset, while maintaining high coherence and suppressing spurious couplings. While widely used tunable interaction approaches rely on single-mode mediation, they are often constrained by nearest-neighbor connectivity, limited on-off ratios, and stringent requirements on qubit frequency allocation. This thesis develops and studies novel strategies for tailoring tunable interactions by moving beyond single-mode mediation, spanning multimode engineered interactions and modeless interaction schemes ("many to no modes"), while accounting for realistic constraints in superconducting hardware. Using a microwave metamaterial waveguide realized by coupled resonator arrays, I demonstrate tunable dissipative interactions that allow on-demand, fast, and high switching-ratio photon emission from a transmon used as a multi-level quantum emitter. This capability is leveraged to achieve deterministic generation of multidimensional photonic cluster states, as well as unconditional reset and leakage reduction of frequency-tunable superconducting qubits. Complementary to these multimode dissipative tunable interactions, this thesis also introduces architectures that realize tunable interactions mediated by many coherent modes or by no mediating modes. I discuss a long-range interaction scheme between superconducting dual-rail qubits mediated by spatially extended eigenmodes of a coupled-resonator array bus. Finally, I propose and analyze a novel modeless coupling architecture based on a SQUID coupler which provides intrinsic cross-Kerr interactions, enabling fast, hybridization-free CZ gates for far-detuned pairs, and discuss its implications for miniaturization of superconducting quantum processors.

•May 1, 2026•0 citations

A double-resonator coupler for high-fidelity two-qubit gates between superconducting qubits

Seunghyeon Jin, Seungha Woo, Shinyoung Hwang +6 more

Tunable couplers have enabled two-qubit gate fidelities in superconducting quantum processors to approach $99.9\%$, yet simultaneously suppressing residual interactions and maintaining flexible qubit-frequency allocation remain central challenges for scaling. Here, we propose a double-resonator coupler (DRC) consisting of two resonators interconnected by a single Josephson junction and a capacitor. The hybridized resonator modes provide two mediated exchange paths whose interference controls the qubit-qubit interaction. The DRC enables complete cancellation of residual $ZZ$ interaction for qubit-qubit detunings well outside the straddling regime, even without direct inter-qubit capacitance, thereby relaxing constraints on frequency allocation and qubit placement. Away from the idle point, the same circuit provides a strong $ZZ$ interaction of approximately $70\,\mathrm{MHz}$, enabling a $20\,\mathrm{ns}$ controlled-Z gate with simulated coherent infidelity below $10^{-5}$. These results establish the DRC as a flexible single-junction coupler architecture for high-fidelity superconducting quantum processors.

quant-pharXiv:2609.05222•Sep 7, 2026•0 citations

Optimal connectivity from idle-qubit residual-coupling crosstalk in a cavity-mediated entangling gate

Andrea Mammola, M. M. Desjardins, Q. Schaeverbeke

Quantum processors operated through long-range interaction mediated by a microwave resonator have been envisioned to allow for high connectivity. The ability to selectively operate qubits rely on the possibility to dynamically suppress the coupling between each qubit and the resonator, however, there always remains a residual coupling. In this article, we investigate the effect of high processor connectivity on average two-qubit gate fidelity in a cavity-based architecture with tunable coupling. Via a perturbative approach, we quantify the crosstalk errors from transverse residual couplings and show that they scale as n m 2 where n is the number of idle qubits and m is the ratio between the transverse residual and active couplings. Setting an error threshold E thr , we demonstrate that crosstalks restrict the hardware topology and prevent the full use of all-to-all connectivity. We predict that the maximum number of qubits allowed by E thr scales as n ∝ E thr / m 2 .

arXiv:2503.07455•Physical Review A•Apr 28, 2025•5 citations

Superconducting architecture demonstrating fast, tunable high-fidelity CZ gates with parametric control of ZZ coupling

X.Y. Jin, Z. Parrott, K. Cicak +6 more

Future quantum information processors require tunable coupling architectures that can produce high-fidelity logical gates between two or more qubits. Parametric coupling is a powerful technique for generating tunable interactions between many qubits. Here, we present a highly flexible parametric coupling scheme with superconducting qubits that provides complete removal of residual Z Z coupling and the implementation of driven SWAP or SWAP-free controlled- Z ( C Z ) gates. Our fully integrated two-dimensional on-chip coupler design is only weakly flux tunable, cancels static linear coupling between the qubits, avoids internal coupler dynamics or excitations, and is extensible to multiqubit circuit-QED systems. Exploring gate fidelity versus gate duration allows us to maximize two-qubit gate fidelity, while providing insights into possible error sources for these gates. Randomized benchmarking over several hours reveals that the parametric SWAP C Z gate achieves an average fidelity of 99.44 ± 0.09 % in a gate duration of 70 ns and that a dispersively driven parametric SWAP-free C Z gate attains an average fidelity of 99.47 ± 0.07 % in only 30 ns. The fidelity remained above this value for over 8 h and peaked twice with a maximum of 99.67 ± 0.14 % . Overall, our parametric approach combines versatility, precision, speed, and high performance in one compact coupler design.

arXiv:2305.02907•Physical Review Applied•Oct 21, 2025•15 citations

Parametric Multielement Coupling Architecture for Coherent and Dissipative Control of Superconducting Qubits

Gerhard B. P. Huber, Federico A. Roy, L. Koch +20 more

As systems for quantum computing keep growing in size and number of qubits, challenges in scaling the control capabilities are becoming increasingly relevant. Efficient schemes to simultaneously mediate coherent interactions between multiple quantum systems and to reduce decoherence errors can minimize the control overhead in next-generation quantum processors. Here, we present a superconducting qubit architecture based on tunable parametric interactions to perform two-qubit gates, reset, leakage recovery, and to read out the qubits. In this architecture, parametrically driven multielement couplers selectively couple qubits to resonators and neighboring qubits, according to the frequency of the drive. We consider a system with two qubits and one readout resonator interacting via a single coupling circuit and experimentally demonstrate a controlled- Z gate with a fidelity of 98.30 ± 0.23 % , a reset operation that unconditionally prepares the qubit ground state with a fidelity of 99.80 ± 0.02 % and a leakage recovery operation with a 98.5 ± 0.3 % success probability. Furthermore, we implement a parametric readout with a single-shot assignment fidelity of 88.0 ± 0.4 % . These operations are all realized using a single tunable coupler and a statically decoupled resonator, demonstrating the experimental feasibility of the proposed architecture and its potential for reducing the system complexity in scalable quantum processors.

arXiv:2403.02203•PRX Quantum•Jun 11, 2025•20 citations

A high-fidelity two-qubit gate for multimode superconducting P-mon qubits

Frederik Pfeiffer, Federico A. Roy, Niklas J. Glaser +11 more

To scale superconducting quantum processors, it is essential to achieve long coherence times while engineering interactions that do not introduce additional decoherence channels. In superconducting qubit systems, this can be realized using multimode circuits that feature a protected qubit mode alongside a distinct mediator mode. Building on this concept, our recently developed P-mon qubit provides intrinsic protection against decoherence from the readout environment. We extend this approach to controlled two-qubit interactions, by exploiting the mediator modes of P-mons for on-demand coupling. Because direct interactions between the qubit modes are strongly suppressed, unwanted $ZZ$-type interactions are significantly reduced to below $3.6(5)~\text{kHz}$ in the idle state. When tuning the coupled mediator modes on resonance, the cross-Kerr interaction between the qubit and the hybridized mediator modes leads to a qubit-state dependent frequency shift. By selectively addressing these transitions, we implement a $180~\text{ns}$ long CZ gate and determine a fidelity of $99.62(4)~\text{%}$. These results represent a significant step toward a scalable superconducting architecture that maintains high performance at scale.

quant-pharXiv:2606.24772•Jun 24, 2026•0 citations
Superconducting qubits have achieved remarkable progress in gate fidelity and coherence, yet their typical nearest-neighbor connectivity presents constraints for implementing complex quantum circuits. Here, we introduce a cavity-mediated coupling architecture in which a shared cavity mode, accessed through tunable qubit-cavity couplers, enables dynamically reconfigurable interactions between non-adjacent qubits. By selectively activating the couplers, we demonstrate that high-fidelity iSWAP and CZ gates can be performed within 50 ns with simulated coherent error below 10−410^{-4}10−4, while residual ZZZZZZ interaction during idling remains below a few kilohertz. Extending to a four-qubit system, we also simulate gates between every qubit pair by selectively enabling the couplers with low qubit crosstalk. This approach provides a practical route toward enhanced interaction flexibility in superconducting quantum processors and may serve as a useful building block for devices that benefit from selective non-local coupling.
Tunable couplings are a central requirement for scalable quantum processing with superconducting quantum circuits. Practical quantum processors must dynamically reconfigure their interaction landscape to accommodate different quantum operations, including idle, single-qubit gates, two-qubit gates, readout, and reset, while maintaining high coherence and suppressing spurious couplings. While widely used tunable interaction approaches rely on single-mode mediation, they are often constrained by nearest-neighbor connectivity, limited on-off ratios, and stringent requirements on qubit frequency allocation. This thesis develops and studies novel strategies for tailoring tunable interactions by moving beyond single-mode mediation, spanning multimode engineered interactions and modeless interaction schemes ("many to no modes"), while accounting for realistic constraints in superconducting hardware. Using a microwave metamaterial waveguide realized by coupled resonator arrays, I demonstrate tunable dissipative interactions that allow on-demand, fast, and high switching-ratio photon emission from a transmon used as a multi-level quantum emitter. This capability is leveraged to achieve deterministic generation of multidimensional photonic cluster states, as well as unconditional reset and leakage reduction of frequency-tunable superconducting qubits. Complementary to these multimode dissipative tunable interactions, this thesis also introduces architectures that realize tunable interactions mediated by many coherent modes or by no mediating modes. I discuss a long-range interaction scheme between superconducting dual-rail qubits mediated by spatially extended eigenmodes of a coupled-resonator array bus. Finally, I propose and analyze a novel modeless coupling architecture based on a SQUID coupler which provides intrinsic cross-Kerr interactions, enabling fast, hybridization-free CZ gates for far-detuned pairs, and discuss its implications for miniaturization of superconducting quantum processors.
Tunable couplers have enabled two-qubit gate fidelities in superconducting quantum processors to approach 99.9%99.9\%99.9%, yet simultaneously suppressing residual interactions and maintaining flexible qubit-frequency allocation remain central challenges for scaling. Here, we propose a double-resonator coupler (DRC) consisting of two resonators interconnected by a single Josephson junction and a capacitor. The hybridized resonator modes provide two mediated exchange paths whose interference controls the qubit-qubit interaction. The DRC enables complete cancellation of residual ZZZZZZ interaction for qubit-qubit detunings well outside the straddling regime, even without direct inter-qubit capacitance, thereby relaxing constraints on frequency allocation and qubit placement. Away from the idle point, the same circuit provides a strong ZZZZZZ interaction of approximately 70 MHz70\,\mathrm{MHz}70MHz, enabling a 20 ns20\,\mathrm{ns}20ns controlled-Z gate with simulated coherent infidelity below 10−510^{-5}10−5. These results establish the DRC as a flexible single-junction coupler architecture for high-fidelity superconducting quantum processors.
Quantum processors operated through long-range interaction mediated by a microwave resonator have been envisioned to allow for high connectivity. The ability to selectively operate qubits rely on the possibility to dynamically suppress the coupling between each qubit and the resonator, however, there always remains a residual coupling. In this article, we investigate the effect of high processor connectivity on average two-qubit gate fidelity in a cavity-based architecture with tunable coupling. Via a perturbative approach, we quantify the crosstalk errors from transverse residual couplings and show that they scale as n m 2 where n is the number of idle qubits and m is the ratio between the transverse residual and active couplings. Setting an error threshold E thr , we demonstrate that crosstalks restrict the hardware topology and prevent the full use of all-to-all connectivity. We predict that the maximum number of qubits allowed by E thr scales as n ∝ E thr / m 2 .
Future quantum information processors require tunable coupling architectures that can produce high-fidelity logical gates between two or more qubits. Parametric coupling is a powerful technique for generating tunable interactions between many qubits. Here, we present a highly flexible parametric coupling scheme with superconducting qubits that provides complete removal of residual Z Z coupling and the implementation of driven SWAP or SWAP-free controlled- Z ( C Z ) gates. Our fully integrated two-dimensional on-chip coupler design is only weakly flux tunable, cancels static linear coupling between the qubits, avoids internal coupler dynamics or excitations, and is extensible to multiqubit circuit-QED systems. Exploring gate fidelity versus gate duration allows us to maximize two-qubit gate fidelity, while providing insights into possible error sources for these gates. Randomized benchmarking over several hours reveals that the parametric SWAP C Z gate achieves an average fidelity of 99.44 ± 0.09 % in a gate duration of 70 ns and that a dispersively driven parametric SWAP-free C Z gate attains an average fidelity of 99.47 ± 0.07 % in only 30 ns. The fidelity remained above this value for over 8 h and peaked twice with a maximum of 99.67 ± 0.14 % . Overall, our parametric approach combines versatility, precision, speed, and high performance in one compact coupler design.
As systems for quantum computing keep growing in size and number of qubits, challenges in scaling the control capabilities are becoming increasingly relevant. Efficient schemes to simultaneously mediate coherent interactions between multiple quantum systems and to reduce decoherence errors can minimize the control overhead in next-generation quantum processors. Here, we present a superconducting qubit architecture based on tunable parametric interactions to perform two-qubit gates, reset, leakage recovery, and to read out the qubits. In this architecture, parametrically driven multielement couplers selectively couple qubits to resonators and neighboring qubits, according to the frequency of the drive. We consider a system with two qubits and one readout resonator interacting via a single coupling circuit and experimentally demonstrate a controlled- Z gate with a fidelity of 98.30 ± 0.23 % , a reset operation that unconditionally prepares the qubit ground state with a fidelity of 99.80 ± 0.02 % and a leakage recovery operation with a 98.5 ± 0.3 % success probability. Furthermore, we implement a parametric readout with a single-shot assignment fidelity of 88.0 ± 0.4 % . These operations are all realized using a single tunable coupler and a statically decoupled resonator, demonstrating the experimental feasibility of the proposed architecture and its potential for reducing the system complexity in scalable quantum processors.
To scale superconducting quantum processors, it is essential to achieve long coherence times while engineering interactions that do not introduce additional decoherence channels. In superconducting qubit systems, this can be realized using multimode circuits that feature a protected qubit mode alongside a distinct mediator mode. Building on this concept, our recently developed P-mon qubit provides intrinsic protection against decoherence from the readout environment. We extend this approach to controlled two-qubit interactions, by exploiting the mediator modes of P-mons for on-demand coupling. Because direct interactions between the qubit modes are strongly suppressed, unwanted ZZZZZZ-type interactions are significantly reduced to below 3.6(5) kHz3.6(5)~\text{kHz}3.6(5) kHz in the idle state. When tuning the coupled mediator modes on resonance, the cross-Kerr interaction between the qubit and the hybridized mediator modes leads to a qubit-state dependent frequency shift. By selectively addressing these transitions, we implement a 180 ns180~\text{ns}180 ns long CZ gate and determine a fidelity of $99.62(4)~\text{%}$. These results represent a significant step toward a scalable superconducting architecture that maintains high performance at scale.