Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2611.10915

Bias-free superconducting microwave nonreciprocity from a passive nonlinear resonator

Brendan MacKay, Abdul Mohamed, Andrea Alù, Shabir Barzanjeh

Published Nov 7, 2026• 0 citations
arXivHTMLPDF

Abstract

Routing microwave tones in a nonreciprocal fashion in a superconducting chip usually requires an external bias, commonly in the form of static magnetic fields, pump tones or temporal modulation. Here we demonstrate microwave nonreciprocity in a bias-free, passive platform, a single nonlinear superconducting resonator patterned in one film without Josephson junctions. Unequal coupling with the two feeding ports makes its nonlinear resonance shift direction-dependent, and its sharp Fano lineshape converts this asymmetric response into a large transmission contrast when excited from opposite directions. Our niobium nitride (NbN) device reaches a directional contrast of 53.0 dB at an insertion loss of 4.6 dB, and it exceeds 20 dB over 9.7 MHz. Time-resolved measurements show that the device routes pulses from 2 us to 1 ms with more than 30 dB of contrast and switches within a few microseconds. Made with the same technology as superconducting amplifiers, such bias-free nonreciprocal components could simplify the on-chip routing of strong pump and control tones in quantum processors

DOI
10.48550/arxiv.2611.10915

Related papers

Design of on-chip superconducting parametric circulators based on time-modulated coupled-resonator loops

Yang Liangliang, Kaiyong He, Genting Dai +5 more

Abstract In quantum information detection, significant interest has recently emerged in replacing conventional ferrite circulators with superconducting magnetic-free nonreciprocal devices. However, superconducting non-reciprocal devices with simpler structures and easier manufacturing processes still require further development. Inspired by conventional microwave circuits, we demonstrate a superconducting nonreciprocal circulator by parametric modulation of three identical, strongly and symmetrically coupled resonators. The circulator requires only three DC superconducting quantum interference devices, achieving an isolation of 20 dB , insertion loss of 0.47 dB , and return loss better than 25 dB over an instantaneous bandwidth of 50 MHz . The center frequency of the circulator is tunable within the range of 4– 8 GHz . Detailed design considerations for the experimental realization of a three-port superconducting circulator are presented, together with simulation results for a four-port circulator. Compared with previously reported superconducting magnetic-free nonreciprocal devices, the proposed circulator features a simpler circuit topology, demonstrating strong potential for scalable superconducting quantum information detection.

Superconductor Science and Technology•Dec 11, 2025•0 citations

Nonreciprocal quantum information processing with superconducting diodes in circuit quantum electrodynamics

Nicolas Dirnegger, Prineha Narang, Arpit Arora

Introducing new components and functionalities into quantum devices is critical in advancing state-of-the-art hardware. Here, we propose superconducting diodes (SDs) as a coherent nonreciprocal element in circuit quantum electrodynamics (cQED) architectures. In particular, we use an asymmetric SQUID as an SD controlled with a flux bias - nonreciprocal element with single control handle and on-chip modality. We spectroscopically characterize SD and show that flux bias acts cooperatively with the nonlinear diode response to induce direction-dependent resonance shifts in the transmission spectrum. We show that even with modest diode efficiency the isolation isolation ratio is sufficiently high, and scales with multiple SDs. We demonstrate the use of the SD as a coupler to realize coherent nonreciprocal qubit-qubit coupling. With a minimal two qubit system, we demonstrate nonreciprocal half-iSWAP, thereby showcasing the potential of intrinsic nonreciprocity as a tool to perform arbitrary two-qubit gates. Our work enables high-fidelity signal routing and entanglement generation in all-to-all connected microwave quantum networks, where nonreciprocity is embedded at the device level.

quant-pharXiv:2511.20758•Nov 27, 2025•7 citations

Widely Tunable On-Chip Microwave Circulator for Superconducting Quantum Circuits

Benjamin J. Chapman, Eric I. Rosenthal, Joseph Kerckhoff +7 more

We report on the design and performance of an on-chip microwave circulator with a widely (GHz) tunable operation frequency.Nonreciprocity is created with a combination of frequency conversion and delay, and requires neither permanent magnets nor microwave bias tones, allowing on-chip integration with other superconducting circuits without the need for high-bandwidth control lines.Isolation in the device exceeds 20 dB over a bandwidth of tens of MHz, and its insertion loss is small, reaching as low as 0.9 dB at select operation frequencies.Furthermore, the device is linear with respect to input power for signal powers up to hundreds of fW (≈10 3 circulating photons), and the direction of circulation can be dynamically reconfigured.We demonstrate its operation at a selection of frequencies between 4 and 6 GHz.

arXiv:1707.04565•Physical Review X•Nov 22, 2017•141 citations

High-Fidelity Qubit Readout Using Interferometric Directional Josephson Devices

Baleegh Abdo, Oblesh Jinka, Nicholas T. Bronn +2 more

Nonreciprocal microwave devices, such as circulators and isolators, are needed in high-fidelity qubit readout schemes to unidirectionally route the readout signals and protect the qubits against noise coming from the output chain.However, cryogenic circulators and isolators are prohibitive in scalable superconducting architectures because they rely on magnetic materials.Here we report a fast (750 ns) high-fidelity (95%) quantum nondemolition readout of a coherent superconducting qubit (T 1 = 52 μs, T 2E = 35 μs) without any nonreciprocal magnetic devices.We use in our readout chain a microwave-controlled qubit readout multichip module (QRMCM) that integrates interferometric directional Josephson devices consisting of an isolator and a reconfigurable isolator or amplifier device, and an off-chip low-pass filter.Using the QRMCM, we demonstrate isolation up to 45 dB within 13 MHz, when both directional devices are operated as isolators, and low-noise amplification in excess of 10 dB within a dynamical bandwidth of 10 MHz, when the reconfigurable device is operated as an amplifier.We also investigate the dependence of the qubit coherence times T ϕ and T 2E on the isolation response of the QRMCM, which we control in situ using the microwave drives feeding the isolators.Furthermore, by directly comparing the QRMCM performance with that of a state-of-art configuration (with T 2E ≈ 2T 1 ) that uses a pair of wideband magnetic isolators, we find that the excess pure dephasing measured with the QRMCM (for which T 2E ≈ T 1 ) is likely limited by the residual thermal photon population in the readout resonator.Improved versions of the QRMCM could replace magnetic circulators and isolators in large superconducting quantum processors.

arXiv:2006.01918•PRX Quantum•Dec 28, 2021•31 citations

Superconducting isolators based on time-modulated coupled-resonator systems

義人 本庄, Chandrashekhar Gaikwad, Daria Kowsari +2 more

We present a unified approach for designing isolators based on temporally modulated coupled resonator networks. Our method leverages standard superconducting quantum interference device--based resonators as building blocks, arranged in series-coupled resonators to realize a wide range of on-chip nonreciprocal devices. The devices operate by translating microwave power into out-of-band intermodulation products in a direction-dependent way. Our theoretical studies demonstrate the effectiveness of the proposed approach, achieving isolators with near-zero insertion losses and isolation greater than 20 dB. To validate our findings, we implemented and measured a series-coupled three-resonator superconducting isolator using a single-layer superconducting process. At a base temperature of 20 mK, our device exhibited an insertion loss of 1.3 dB in the forward direction and isolation of up to 25 dB at the center frequency and greater than 15 dB across a bandwidth of 250 MHz in the reverse direction. Our approach promises to enable the design of a broad range of high-performance nonreciprocal devices for superconducting circuits.

arXiv:2307.01853•Physical Review Applied•May 30, 2024•10 citations

A persistent-current-biased and current-actuated switch for superconducting circuits

Ziyi Zhao, Eva Gurra, Michael R. Vissers +1 more

Broadband and low-loss superconducting switches can facilitate large-scale quantum information processors and cryogenic detectors by dynamically reconfiguring the connectivity of their circuits. The time dependent connectivity is enabled by the nonlinearity of lossless Josephson junctions, which are often wired into superconducting loops to be controlled by magnetic flux. However, this approach needs a power-consuming constant flux bias and dynamic flux actuation, both of which are hard to isolate from other switches or flux sensitive elements, limiting their integration density. Here, we design and characterize a microwave switch that implements a persistent current bias and direct current actuation to reduce static power consumption, actuation energy and potential crosstalk to other devices. We show that persistent current associated with tens of flux quanta is stable and long-lived, reducing the need for on-the-fly tuning. We further demonstrate that our switch has desirable performance for superconducting-circuit-based quantum information processing, including an off mode with more than 20 dB isolation comparable to commercial ferrite isolators, power handling larger than 100 pW sufficient for resonator readout tones and amplifier pumps, and modulation bandwidth broader than 600 MHz useful for multiplexing schemes.

quant-pharXiv:2603.06472•Mar 9, 2026•1 citation
Routing microwave tones in a nonreciprocal fashion in a superconducting chip usually requires an external bias, commonly in the form of static magnetic fields, pump tones or temporal modulation. Here we demonstrate microwave nonreciprocity in a bias-free, passive platform, a single nonlinear superconducting resonator patterned in one film without Josephson junctions. Unequal coupling with the two feeding ports makes its nonlinear resonance shift direction-dependent, and its sharp Fano lineshape converts this asymmetric response into a large transmission contrast when excited from opposite directions. Our niobium nitride (NbN) device reaches a directional contrast of 53.0 dB at an insertion loss of 4.6 dB, and it exceeds 20 dB over 9.7 MHz. Time-resolved measurements show that the device routes pulses from 2 us to 1 ms with more than 30 dB of contrast and switches within a few microseconds. Made with the same technology as superconducting amplifiers, such bias-free nonreciprocal components could simplify the on-chip routing of strong pump and control tones in quantum processors
Abstract In quantum information detection, significant interest has recently emerged in replacing conventional ferrite circulators with superconducting magnetic-free nonreciprocal devices. However, superconducting non-reciprocal devices with simpler structures and easier manufacturing processes still require further development. Inspired by conventional microwave circuits, we demonstrate a superconducting nonreciprocal circulator by parametric modulation of three identical, strongly and symmetrically coupled resonators. The circulator requires only three DC superconducting quantum interference devices, achieving an isolation of 20 dB , insertion loss of 0.47 dB , and return loss better than 25 dB over an instantaneous bandwidth of 50 MHz . The center frequency of the circulator is tunable within the range of 4– 8 GHz . Detailed design considerations for the experimental realization of a three-port superconducting circulator are presented, together with simulation results for a four-port circulator. Compared with previously reported superconducting magnetic-free nonreciprocal devices, the proposed circulator features a simpler circuit topology, demonstrating strong potential for scalable superconducting quantum information detection.
Introducing new components and functionalities into quantum devices is critical in advancing state-of-the-art hardware. Here, we propose superconducting diodes (SDs) as a coherent nonreciprocal element in circuit quantum electrodynamics (cQED) architectures. In particular, we use an asymmetric SQUID as an SD controlled with a flux bias - nonreciprocal element with single control handle and on-chip modality. We spectroscopically characterize SD and show that flux bias acts cooperatively with the nonlinear diode response to induce direction-dependent resonance shifts in the transmission spectrum. We show that even with modest diode efficiency the isolation isolation ratio is sufficiently high, and scales with multiple SDs. We demonstrate the use of the SD as a coupler to realize coherent nonreciprocal qubit-qubit coupling. With a minimal two qubit system, we demonstrate nonreciprocal half-iSWAP, thereby showcasing the potential of intrinsic nonreciprocity as a tool to perform arbitrary two-qubit gates. Our work enables high-fidelity signal routing and entanglement generation in all-to-all connected microwave quantum networks, where nonreciprocity is embedded at the device level.
We report on the design and performance of an on-chip microwave circulator with a widely (GHz) tunable operation frequency.Nonreciprocity is created with a combination of frequency conversion and delay, and requires neither permanent magnets nor microwave bias tones, allowing on-chip integration with other superconducting circuits without the need for high-bandwidth control lines.Isolation in the device exceeds 20 dB over a bandwidth of tens of MHz, and its insertion loss is small, reaching as low as 0.9 dB at select operation frequencies.Furthermore, the device is linear with respect to input power for signal powers up to hundreds of fW (≈10 3 circulating photons), and the direction of circulation can be dynamically reconfigured.We demonstrate its operation at a selection of frequencies between 4 and 6 GHz.
Nonreciprocal microwave devices, such as circulators and isolators, are needed in high-fidelity qubit readout schemes to unidirectionally route the readout signals and protect the qubits against noise coming from the output chain.However, cryogenic circulators and isolators are prohibitive in scalable superconducting architectures because they rely on magnetic materials.Here we report a fast (750 ns) high-fidelity (95%) quantum nondemolition readout of a coherent superconducting qubit (T 1 = 52 μs, T 2E = 35 μs) without any nonreciprocal magnetic devices.We use in our readout chain a microwave-controlled qubit readout multichip module (QRMCM) that integrates interferometric directional Josephson devices consisting of an isolator and a reconfigurable isolator or amplifier device, and an off-chip low-pass filter.Using the QRMCM, we demonstrate isolation up to 45 dB within 13 MHz, when both directional devices are operated as isolators, and low-noise amplification in excess of 10 dB within a dynamical bandwidth of 10 MHz, when the reconfigurable device is operated as an amplifier.We also investigate the dependence of the qubit coherence times T ϕ and T 2E on the isolation response of the QRMCM, which we control in situ using the microwave drives feeding the isolators.Furthermore, by directly comparing the QRMCM performance with that of a state-of-art configuration (with T 2E ≈ 2T 1 ) that uses a pair of wideband magnetic isolators, we find that the excess pure dephasing measured with the QRMCM (for which T 2E ≈ T 1 ) is likely limited by the residual thermal photon population in the readout resonator.Improved versions of the QRMCM could replace magnetic circulators and isolators in large superconducting quantum processors.
We present a unified approach for designing isolators based on temporally modulated coupled resonator networks. Our method leverages standard superconducting quantum interference device--based resonators as building blocks, arranged in series-coupled resonators to realize a wide range of on-chip nonreciprocal devices. The devices operate by translating microwave power into out-of-band intermodulation products in a direction-dependent way. Our theoretical studies demonstrate the effectiveness of the proposed approach, achieving isolators with near-zero insertion losses and isolation greater than 20 dB. To validate our findings, we implemented and measured a series-coupled three-resonator superconducting isolator using a single-layer superconducting process. At a base temperature of 20 mK, our device exhibited an insertion loss of 1.3 dB in the forward direction and isolation of up to 25 dB at the center frequency and greater than 15 dB across a bandwidth of 250 MHz in the reverse direction. Our approach promises to enable the design of a broad range of high-performance nonreciprocal devices for superconducting circuits.
Broadband and low-loss superconducting switches can facilitate large-scale quantum information processors and cryogenic detectors by dynamically reconfiguring the connectivity of their circuits. The time dependent connectivity is enabled by the nonlinearity of lossless Josephson junctions, which are often wired into superconducting loops to be controlled by magnetic flux. However, this approach needs a power-consuming constant flux bias and dynamic flux actuation, both of which are hard to isolate from other switches or flux sensitive elements, limiting their integration density. Here, we design and characterize a microwave switch that implements a persistent current bias and direct current actuation to reduce static power consumption, actuation energy and potential crosstalk to other devices. We show that persistent current associated with tens of flux quanta is stable and long-lived, reducing the need for on-the-fly tuning. We further demonstrate that our switch has desirable performance for superconducting-circuit-based quantum information processing, including an off mode with more than 20 dB isolation comparable to commercial ferrite isolators, power handling larger than 100 pW sufficient for resonator readout tones and amplifier pumps, and modulation bandwidth broader than 600 MHz useful for multiplexing schemes.