Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Superconductor Science and Technology

Design of on-chip superconducting parametric circulators based on time-modulated coupled-resonator loops

Yang Liangliang, Kaiyong He, Genting Dai, Jinlin Chang, Jiang Linpan, Zechen Sun, Jianshe Liu, Wei Chen

Published Dec 11, 2025• 0 citations
Publisher

Abstract

Abstract In quantum information detection, significant interest has recently emerged in replacing conventional ferrite circulators with superconducting magnetic-free nonreciprocal devices. However, superconducting non-reciprocal devices with simpler structures and easier manufacturing processes still require further development. Inspired by conventional microwave circuits, we demonstrate a superconducting nonreciprocal circulator by parametric modulation of three identical, strongly and symmetrically coupled resonators. The circulator requires only three DC superconducting quantum interference devices, achieving an isolation of 20 dB , insertion loss of 0.47 dB , and return loss better than 25 dB over an instantaneous bandwidth of 50 MHz . The center frequency of the circulator is tunable within the range of 4– 8 GHz . Detailed design considerations for the experimental realization of a three-port superconducting circulator are presented, together with simulation results for a four-port circulator. Compared with previously reported superconducting magnetic-free nonreciprocal devices, the proposed circulator features a simpler circuit topology, demonstrating strong potential for scalable superconducting quantum information detection.

DOI
10.1088/1361-6668/ae2baf

Related papers

Widely Tunable On-Chip Microwave Circulator for Superconducting Quantum Circuits

Benjamin J. Chapman, Eric I. Rosenthal, Joseph Kerckhoff +7 more

We report on the design and performance of an on-chip microwave circulator with a widely (GHz) tunable operation frequency.Nonreciprocity is created with a combination of frequency conversion and delay, and requires neither permanent magnets nor microwave bias tones, allowing on-chip integration with other superconducting circuits without the need for high-bandwidth control lines.Isolation in the device exceeds 20 dB over a bandwidth of tens of MHz, and its insertion loss is small, reaching as low as 0.9 dB at select operation frequencies.Furthermore, the device is linear with respect to input power for signal powers up to hundreds of fW (≈10 3 circulating photons), and the direction of circulation can be dynamically reconfigured.We demonstrate its operation at a selection of frequencies between 4 and 6 GHz.

arXiv:1707.04565•Physical Review X•Nov 22, 2017•141 citations

Widely Tunable On-Chip Microwave Circulator for Superconducting Quantum Circuits

Benjamin J. Chapman, Eric I. Rosenthal, Joseph Kerckhoff +6 more

This thesis develops theory for and experimentally demonstrates a new way to break Lorentz reciprocity—the symmetry, in an electrical network, under exchange of source and detector. The approach is based on the sequential application of frequency conversion and delay; as frequency and time are Fourier duals, these operations do not generally commute. We apply this method in the construction of an on-chip superconducting microwave circulator, a critical component for the unidirectional routing of quantum information in superconducting networks. The device requires neither permanent magnets nor microwave control tones, allowing on-chip integration with other superconducting circuits without expensive control hardware. Isolation in the device exceeds 20 dB over a bandwidth of tens of MHz, and its insertion loss is small, reaching as low as 0.9 dB at select operation frequencies. Furthermore, the device is linear with respect to input power for signal powers up to many hundreds of fW (~103 circulating photons), and the direction of circulation can be dynamically reconfigured. We demonstrate its tunability with operation at a selection of frequencies between 4 and 6 GHz. Given the current status of quantum error-correction and architectures for quantum information processing with superconducting circuits, such scalable non-reciprocal devices will almost certainly be necessary for construction of a superconducting quantum computer intended to be more than a proof-of-principle.

•Nov 22, 2017•133 citations

Superconducting isolators based on time-modulated coupled-resonator systems

義人 本庄, Chandrashekhar Gaikwad, Daria Kowsari +2 more

We present a unified approach for designing isolators based on temporally modulated coupled resonator networks. Our method leverages standard superconducting quantum interference device--based resonators as building blocks, arranged in series-coupled resonators to realize a wide range of on-chip nonreciprocal devices. The devices operate by translating microwave power into out-of-band intermodulation products in a direction-dependent way. Our theoretical studies demonstrate the effectiveness of the proposed approach, achieving isolators with near-zero insertion losses and isolation greater than 20 dB. To validate our findings, we implemented and measured a series-coupled three-resonator superconducting isolator using a single-layer superconducting process. At a base temperature of 20 mK, our device exhibited an insertion loss of 1.3 dB in the forward direction and isolation of up to 25 dB at the center frequency and greater than 15 dB across a bandwidth of 250 MHz in the reverse direction. Our approach promises to enable the design of a broad range of high-performance nonreciprocal devices for superconducting circuits.

arXiv:2307.01853•Physical Review Applied•May 30, 2024•10 citations

Low-loss on-chip superconducting microwave circulator assisted by shunting capacitors

N. Pradeep Kumar, Dat Thanh Le, Prasanna Pakkiam +2 more

Ferrite-free circulators that are passive and readily integratable on a chip are highly sought-after in quantum technologies based on superconducting circuits. In our previous work, we implemented such a circulator using a three-Josephson-junction loop that exhibited unambiguous nonreciprocity and signal circulation, but required junction energies to be within 1 % of design values. This tolerance is tighter than standard junction fabrication methods provide, so we propose and demonstrate a design improvement that relaxes the required junction fabrication precision, allowing for higher device performance and fabrication yield. Specifically, we introduce large direct capacitive couplings between the waveguides, which based on the modeling we describe here, requires less stringent junction fabrication tolerance. We implement the design, and measure enhanced “circulation fidelity” above 97 % , with optimized on-resonance insertion loss of 0.2 dB, isolation of 18 dB, and power reflectance of − 15 dB , in good agreement with model calculations.

arXiv:2406.14821•Physical Review Research•Jan 21, 2025•8 citations

Passive Superconducting Circulator on a Chip

Rohit Navarathna, Dat Thanh Le, Andrés Rosario Hamann +3 more

An on-chip microwave circulator that is compatible with superconducting devices is a key element for scale up of superconducting circuits. Previous approaches to integrating circulators on chip involve either external driving that requires extra microwave lines or a strong magnetic field that would compromise superconductivity. Here we report the first proof-of-principle realization of a passive on-chip circulator that is made from a superconducting loop interrupted by three notionally identical Josephson junctions and is tuned with only dc control fields. Our experimental results show evidence for nonreciprocal scattering, and excellent agreement with theoretical simulations. We also present a detailed analysis of quasiparticle tunneling in our device using a hidden Markov model. By reducing the junction asymmetry and utilizing the known methods of protection from quasiparticles, we anticipate that Josephson-loop circulator will become ubiquitous in superconducting circuits.

arXiv:2208.13339•Physical Review Letters•Jan 20, 2023•34 citations

Magnetic-Free Traveling-Wave Nonreciprocal Superconducting Microwave Components

Dengke Zhang, Jaw-Shen Tsai

We propose a design to realize integrated broadband nonreciprocal microwave isolators and circulators using superconducting circuit elements without any magnetic materials. To obtain a broadband response, we develop a waveguide-based design by temporal modulations. The corresponding compact traveling-wave structure is implemented with integrated superconducting composite right-/left-handed transmission lines. The calculations show that the bandwidth of 580 MHz can be realized over a nonreciprocal isolation of 20 dB in reflections. Such on-chip isolators and circulators are useful for cryogenic integrated microwave connections and measurements, such as protecting qubits from the amplified reflected signal in multiplexed readout.

arXiv:2106.02928•Physical Review Applied•Jun 4, 2021•10 citations
Abstract In quantum information detection, significant interest has recently emerged in replacing conventional ferrite circulators with superconducting magnetic-free nonreciprocal devices. However, superconducting non-reciprocal devices with simpler structures and easier manufacturing processes still require further development. Inspired by conventional microwave circuits, we demonstrate a superconducting nonreciprocal circulator by parametric modulation of three identical, strongly and symmetrically coupled resonators. The circulator requires only three DC superconducting quantum interference devices, achieving an isolation of 20 dB , insertion loss of 0.47 dB , and return loss better than 25 dB over an instantaneous bandwidth of 50 MHz . The center frequency of the circulator is tunable within the range of 4– 8 GHz . Detailed design considerations for the experimental realization of a three-port superconducting circulator are presented, together with simulation results for a four-port circulator. Compared with previously reported superconducting magnetic-free nonreciprocal devices, the proposed circulator features a simpler circuit topology, demonstrating strong potential for scalable superconducting quantum information detection.
We report on the design and performance of an on-chip microwave circulator with a widely (GHz) tunable operation frequency.Nonreciprocity is created with a combination of frequency conversion and delay, and requires neither permanent magnets nor microwave bias tones, allowing on-chip integration with other superconducting circuits without the need for high-bandwidth control lines.Isolation in the device exceeds 20 dB over a bandwidth of tens of MHz, and its insertion loss is small, reaching as low as 0.9 dB at select operation frequencies.Furthermore, the device is linear with respect to input power for signal powers up to hundreds of fW (≈10 3 circulating photons), and the direction of circulation can be dynamically reconfigured.We demonstrate its operation at a selection of frequencies between 4 and 6 GHz.
This thesis develops theory for and experimentally demonstrates a new way to break Lorentz reciprocity—the symmetry, in an electrical network, under exchange of source and detector. The approach is based on the sequential application of frequency conversion and delay; as frequency and time are Fourier duals, these operations do not generally commute. We apply this method in the construction of an on-chip superconducting microwave circulator, a critical component for the unidirectional routing of quantum information in superconducting networks. The device requires neither permanent magnets nor microwave control tones, allowing on-chip integration with other superconducting circuits without expensive control hardware. Isolation in the device exceeds 20 dB over a bandwidth of tens of MHz, and its insertion loss is small, reaching as low as 0.9 dB at select operation frequencies. Furthermore, the device is linear with respect to input power for signal powers up to many hundreds of fW (~103 circulating photons), and the direction of circulation can be dynamically reconfigured. We demonstrate its tunability with operation at a selection of frequencies between 4 and 6 GHz. Given the current status of quantum error-correction and architectures for quantum information processing with superconducting circuits, such scalable non-reciprocal devices will almost certainly be necessary for construction of a superconducting quantum computer intended to be more than a proof-of-principle.
We present a unified approach for designing isolators based on temporally modulated coupled resonator networks. Our method leverages standard superconducting quantum interference device--based resonators as building blocks, arranged in series-coupled resonators to realize a wide range of on-chip nonreciprocal devices. The devices operate by translating microwave power into out-of-band intermodulation products in a direction-dependent way. Our theoretical studies demonstrate the effectiveness of the proposed approach, achieving isolators with near-zero insertion losses and isolation greater than 20 dB. To validate our findings, we implemented and measured a series-coupled three-resonator superconducting isolator using a single-layer superconducting process. At a base temperature of 20 mK, our device exhibited an insertion loss of 1.3 dB in the forward direction and isolation of up to 25 dB at the center frequency and greater than 15 dB across a bandwidth of 250 MHz in the reverse direction. Our approach promises to enable the design of a broad range of high-performance nonreciprocal devices for superconducting circuits.
Ferrite-free circulators that are passive and readily integratable on a chip are highly sought-after in quantum technologies based on superconducting circuits. In our previous work, we implemented such a circulator using a three-Josephson-junction loop that exhibited unambiguous nonreciprocity and signal circulation, but required junction energies to be within 1 % of design values. This tolerance is tighter than standard junction fabrication methods provide, so we propose and demonstrate a design improvement that relaxes the required junction fabrication precision, allowing for higher device performance and fabrication yield. Specifically, we introduce large direct capacitive couplings between the waveguides, which based on the modeling we describe here, requires less stringent junction fabrication tolerance. We implement the design, and measure enhanced “circulation fidelity” above 97 % , with optimized on-resonance insertion loss of 0.2 dB, isolation of 18 dB, and power reflectance of − 15 dB , in good agreement with model calculations.
An on-chip microwave circulator that is compatible with superconducting devices is a key element for scale up of superconducting circuits. Previous approaches to integrating circulators on chip involve either external driving that requires extra microwave lines or a strong magnetic field that would compromise superconductivity. Here we report the first proof-of-principle realization of a passive on-chip circulator that is made from a superconducting loop interrupted by three notionally identical Josephson junctions and is tuned with only dc control fields. Our experimental results show evidence for nonreciprocal scattering, and excellent agreement with theoretical simulations. We also present a detailed analysis of quasiparticle tunneling in our device using a hidden Markov model. By reducing the junction asymmetry and utilizing the known methods of protection from quasiparticles, we anticipate that Josephson-loop circulator will become ubiquitous in superconducting circuits.
We propose a design to realize integrated broadband nonreciprocal microwave isolators and circulators using superconducting circuit elements without any magnetic materials. To obtain a broadband response, we develop a waveguide-based design by temporal modulations. The corresponding compact traveling-wave structure is implemented with integrated superconducting composite right-/left-handed transmission lines. The calculations show that the bandwidth of 580 MHz can be realized over a nonreciprocal isolation of 20 dB in reflections. Such on-chip isolators and circulators are useful for cryogenic integrated microwave connections and measurements, such as protecting qubits from the amplified reflected signal in multiplexed readout.