Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2610.10432

Dynamically protected erasure qubit via low-frequency charge driving

Ahmed Hajr, Ke Wang, Bingcheng Qing, Akel Hashim, Bibek Bhandari, Dominic Briseño-Colunga, Justin Dressel, Andrew N. Jordan, Irfan Siddiqi

quant-phSubmitted Oct 7, 2026• Announced Oct 8, 2026• 0 citations
arXivHTMLPDF

Abstract

Dynamical protection via strong driving can enable resilient quantum processing on imperfect physical hardware. However, the practical utility of such schemes is frequently limited by parasitic processes such as drive-induced dephasing and leakage. Here, we demonstrate that sub-GHz charge driving of superconducting Kerr oscillators (KOs) in the transmon regime circumvents this trade-off, simultaneously activating fast parametric interactions and protecting the encoded qubit from low-frequency noise. The key is the frequency dependence of the charge sensitivity: using the AC Stark shift as a probe, we find that the KO frequency sensitivity to a charge drive grows quadratically with both drive frequency and amplitude, making the oscillator weakly sensitive to $1/f$ charge noise yet strongly coupled to drives near 1~GHz. Exploiting this, we first demonstrate cooling and reset of the KO in 82~ns, to a residual population below $0.7\%$---lower than its $2.5\%$ steady-state thermal population. Next, using two KOs, we demonstrate logical control and dynamical protection of a dual-rail qubit with nearly fourfold erasure bias. Finally, using a single end-of-circuit erasure check, we achieve an error per Clifford of $5.6\times10^{-4}$, which falls to $1.5\times10^{-4}$ after post-selection, with 25~ns gates.

AI Summary

The paper investigates whether far-off-resonant charge driving can activate fast parametric interactions in superconducting oscillators while supporting dynamical protection without substantial drive-induced errors. It uses a planar circuit containing two capacitively shunted double-SNAIL Kerr oscillators, whose cubic nonlinearity enables three-wave mixing and whose DC charge dispersion is negligible. AC Stark-shift spectroscopy finds shifts quadratic in drive amplitude and frequency. A displaced-frame calculation, supported by Floquet simulations, attributes the low-frequency suppression to cancellation between rotating and counter-rotating contributions. Difference-frequency driving implements an oscillator–readout-resonator swap in 82 ns, reducing oscillator excitation to an upper bound of $0.7\%$, versus a $2.5\%$ steady-state thermal population; the transferred excitation subsequently dissipates on a $1.1\,\mu\mathrm{s}$ timescale. Encoding a dual-rail qubit in the two oscillators, the experiment uses a driven beam-splitter interaction for logical rotations and spin-locking. Drive-dependent decay measurements show suppression of quasistatic detuning noise consistent with second-order sensitivity scaling inversely with interaction strength. Post-selected spin-locking decay saturates near 2 kHz, approximately fourfold below the unconditioned rate. Clifford randomized benchmarking with 25-ns logical $X(\pi/2)$ gates gives errors per Clifford of $5.6\times10^{-4}$ without post-selection and $1.5\times10^{-4}$ after an end-of-sequence erasure check. The stated limitations are oscillator lifetimes for unconditioned performance, measurement-induced transitions for the reset-population bound, and missed loss-then-heating events with only one erasure check. Mid-circuit detection using an additional ancilla and entangling gates between encoded qubits remain proposed extensions.

Little sign of AI-generated textMissing comparison

Error found: Supplementary Note S4 incorrectly identifies the low-frequency Stark-shift coefficient with −2α: for its stated oscillator Hamiltonian, the leading coefficient is 24g₄ − 108g₃²/ωKO, not 24g₄ − 120g₃²/ωKO.

Written by gpt-6.1-sol from the paper's full text. Automated: it can be wrong.

Related papers

Hardware-Efficient Erasure Qubits With Superconducting Transmon Qutrits

Bao-Jie Liu, Ying-Ying Wang, Yu-Xin Wang +3 more

Quantum error correction using erasure qubits offers higher fault-tolerant thresholds and improved scaling by converting dominant physical errors into detectable erasures. In superconducting circuits, erasure qubits can be constructed using the dual-rail approach, which, however, requires additional qubit-count overhead and tailored coupling elements. Here, we demonstrate a hardware-efficient scheme that operates transmon qutrits as erasure qubits, which is compatible with standard superconducting circuit-QED hardware. The logical states $\ket{0_\text{L}}$ and $\ket{1_\text{L}}$ are represented by the ground and second excited states, while the dominant relaxation errors can be detected via an ancilla qubit using a microwave-activated two-qutrit SWAP gate. We demonstrate a logical qubit $T_1$ lifetime exceeding $500\,μ\mathrm{s}$, post-selected with repeated mid-circuit erasure detection, which is ten times longer than the $T_1$ time of the transmon physical qubit. Coherence times beyond $300\,μ\mathrm{s}$ are achieved using dynamical decoupling. Single-qubit gate operations reach average Clifford gate infidelity on the order of $10^{-4}$. We further demonstrate dual-purposing an ancilla qubit for both erasure detection and parity checking, showing heralded generation of Bell states between erasure qubits. These results suggest that mainstream architectures of transmon qubit arrays may already be capable of implementing erasure-based QEC strategies for hardware-efficient fault-tolerant quantum computing.

quant-pharXiv:2604.08672•Apr 13, 2026•3 citations

Dynamical error reshaping for dual-rail erasure qubits

Filippos Dakis, Shruti Puri, Sophia E. Economou +1 more

Erasure qubits -- qubits designed to have an error profile that is dominated by detectable leakage errors -- are a promising way to cut down the resources needed for quantum error correction. There have been several recent experiments demonstrating erasure qubits in superconducting quantum processors, most notably the dual-rail qubit defined by the one-photon subspace of two coupled cavities. An outstanding challenge is that the ancillary transmons needed to facilitate erasure checks and two-qubit gates introduce a substantial amount of noise, limiting the benefits of working with erasure-biased qubits. Here, we show how to suppress the adverse effects of transmon-induced noise while performing erasure checks or two-qubit gates. We present control schemes for these operations that suppress erasure check errors by three orders of magnitude and reduce the logical two-qubit gate infidelities by up to three orders of magnitude.

arXiv:2510.08416•Oct 9, 2025•2 citations

Fast superconducting qubit control with subharmonic drives

Mingkang Xia, Chao Zhou, Chenxu Liu +8 more

Increasing the fidelity of single-qubit gates requires a combination of faster pulses and increased qubit coherence. However, these requirements can be contradictory. Additionally, increasing the drive power can heat the qubit’s environment and degrade coherence. In this work, we circumvent this issue and achieve rapid gates by pumping a transmon’s native Kerr at approximately one third of the qubit’s resonant frequency. The subharmonic Rabi rate of the process is proportional to applied drive amplitude cubed, allowing for rapid gates. In addition, we demonstrate that filtering can be used to protect the qubit’s coherence while performing rapid gates. Single qubit gates as short as 37.4 ns are demonstrated with fidelity of 99.91%. We present theoretical calculations indicating that drive induced multi-photon decay will not limit qubit lifetime; calculated power absorption also indicates that this technique could reduce cryostat heating for fast gates, a vital requirement for large-scale quantum computers. There is a trade-off between achieving fast qubit control and preserving long qubit lifetimes. In this work, the authors demonstrate single qubit gates by driving a transmon qubit parametrically at 1/3 of its frequency, creating fast, high-fidelity gates while protecting the qubit lifetime and mitigating heating.

arXiv:2306.10162•Nature Communications•Dec 23, 2025•23 citations

Efficient Microwave-Photons Wave-Mixing with Superconducting Quantum Circuits

Ahmed Hajr

Quantum computing is a relatively new computing paradigm that leverages entanglement to implement algorithms beyond the reach of classical hardware. Superconducting quantum circuits have emerged as a platform to build quantum processors, with demonstrations of quantum supremacy over classical supercomputers and quantum error correction beyond fault tolerance. However, current noisy devices require significant improvements to unlock the full potential of quantum algorithms.This thesis investigates intrinsic noise channels in superconducting circuits and the design of noise-resilient qubits. By characterizing high-quality superconducting resonators, we identify lossy dielectric materials at the interfaces as the dominant loss mechanism, which we mitigate via targeted surface treatments. Subsequently, we leverage Josephson junction nonlinearity to engineer noise-biased qubits utilizing the Kerr parametric oscillator (KPO). By analyzing the efficiency of strong, far-off-resonance driving to facilitate three- and four-wave mixing processes, we demonstrate high-fidelity operations on Fock, Kerr-cat, and dual-rail qubits. For the Kerr-cat qubit, we introduce a novel 2D architecture that enables strong light-matter coupling with suppressed Purcell decay, yielding millisecond-scale bit-flip lifetimes. Within this same architecture, we demonstrate a longitudinal qubit readout with a $99.6\%$ quantum nondemolition score, alongside a high-fidelity universal single-qubit gate set, all while maintaining bit-flip error suppression. Finally, we exploit the efficient wave-mixing of strongly coupled, far-detuned KPOs to realize a dynamically protected dual-rail qubit exhibiting both erasure bias and high-fidelity single-qubit gates.

•May 1, 2026•0 citations

Programmable coupling to electromagnetic environments in superconducting qubits

Aashish Sah

Superconducting quantum circuits have emerged as a leading platform for building large-scale quantum computers, owing to their ability to engineer strong, highly tunable interactions. However, achieving high-fidelity quantum operations requires overcoming the fundamental isolation-andcontrol challenge: qubits must be well-isolated from their electromagnetic environment to maintain long coherence times, yet they require strong external coupling for fast control, readout, and initialization. In current architectures, this trade-off often demands complex auxiliary circuitry that can introduce additional noise and thermal loads. This thesis presents novel circuit designs and control techniques to address the isolation-and-control challenge in superconducting transmon qubits. First, we introduce integrated on-chip filters, in particular, 𝜆/4 and 𝜆/2 transmission line filters that exhibit a stopband at the qubit frequency. This design protects the qubit from Purcell decay, yielding up to a 200-fold improvement in the energy relaxation time 𝑇1 at the stopband. To achieve fast single-qubit gates despite this isolation, we employ subharmonic driving, demonstrating sub-ten-nanosecond control and Rabi oscillations with a 12-ns pulse duration while significantly reducing the cryogenic thermal load. Building upon these static filters, we propose and experimentally demonstrate the quantum dial, a dynamically tunable band-stop filter consisting of a series array of direct-current superconducting quantum interference devices. The quantum dial enables on-demand tuning of the qubit–environment coupling, including a reduction of 𝑇1 from over 150 μs to roughly 200 ns, while introducing minimal ac Stark shifts. We demonstrate its versatility by dialing between three operational regimes: an idle state with 99.99% fidelity, a control state enabling 99.9% fidelity for 40-ns single-qubit gates at −110 dBm, and a strongly coupled state for unconditional, state-independent qubit reset. Furthermore, the quantum dial enables qubit thermometry close to the quantum-Fisherinformation bound, with a noise-equivalent temperature down to 0.6 mK/√Hz at 60 mK. Alongside the development of these dedicated control architectures, this thesis contributes to the broader framework of circuit quantum electrodynamics by advancing specific microwave engineering and characterization techniques. In particular, we explore the miniaturization of circuit footprints through the realization of compact sub-gigahertz inductor-capacitor resonators. Additionally, we contribute to the optimization of unconditional qubit reset using a single-junction quantum-circuit refrigerator, and to the advanced characterization of microwave fields via computed tomography of propagating microwave photons. In summary, these results demonstrate fixed and tunable drive-line filters that suppress idle-state radiative decay while preserving selected control, reset, and thermometry operations. By replacing static coupling compromises with temporally programmable environments, these architectures offer a promising route to reducing noise, mitigating crosstalk, and accelerating error-correction cycles in future superconducting quantum processors.

•Jan 1, 2026•0 citations

Demonstrating a Long-Coherence Dual-Rail Erasure Qubit Using Tunable Transmons

Harry Levine, Arbel Haim, Jimmy S. C. Hung +97 more

Quantum error correction with erasure qubits promises significant advantages over standard error correction due to favorable thresholds for erasure errors. To realize this advantage in practice requires a qubit for which nearly all errors are such erasure errors, and the ability to check for erasure errors without dephasing the qubit. We demonstrate that a “dual-rail qubit” consisting of a pair of resonantly coupled transmons can form a highly coherent erasure qubit, where transmon T 1 errors are converted into erasure errors and residual dephasing is strongly suppressed, leading to millisecond-scale coherence within the qubit subspace. We show that single-qubit gates are limited primarily by erasure errors, with erasure probability p erasure = 2.19 ( 2 ) × 10 − 3 per gate while the residual errors are ∼ 40 times lower. We further demonstrate midcircuit detection of erasure errors while introducing < 0.1 % dephasing error per check. Finally, we show that the suppression of transmon noise allows this dual-rail qubit to preserve high coherence over a broad tunable operating range, offering an improved capacity to avoid frequency collisions. This work establishes transmon-based dual-rail qubits as an attractive building block for hardware-efficient quantum error correction. Published by the American Physical Society 2024

arXiv:2307.08737•Physical Review X•Mar 20, 2024•89 citations
Dynamical protection via strong driving can enable resilient quantum processing on imperfect physical hardware. However, the practical utility of such schemes is frequently limited by parasitic processes such as drive-induced dephasing and leakage. Here, we demonstrate that sub-GHz charge driving of superconducting Kerr oscillators (KOs) in the transmon regime circumvents this trade-off, simultaneously activating fast parametric interactions and protecting the encoded qubit from low-frequency noise. The key is the frequency dependence of the charge sensitivity: using the AC Stark shift as a probe, we find that the KO frequency sensitivity to a charge drive grows quadratically with both drive frequency and amplitude, making the oscillator weakly sensitive to 1/f1/f1/f charge noise yet strongly coupled to drives near 1GHz. Exploiting this, we first demonstrate cooling and reset of the KO in 82ns, to a residual population below 0.7%0.7\%0.7%---lower than its 2.5%2.5\%2.5% steady-state thermal population. Next, using two KOs, we demonstrate logical control and dynamical protection of a dual-rail qubit with nearly fourfold erasure bias. Finally, using a single end-of-circuit erasure check, we achieve an error per Clifford of 5.6×10−45.6\times10^{-4}5.6×10−4, which falls to 1.5×10−41.5\times10^{-4}1.5×10−4 after post-selection, with 25~ns gates.
The paper investigates whether far-off-resonant charge driving can activate fast parametric interactions in superconducting oscillators while supporting dynamical protection without substantial drive-induced errors. It uses a planar circuit containing two capacitively shunted double-SNAIL Kerr oscillators, whose cubic nonlinearity enables three-wave mixing and whose DC charge dispersion is negligible.
AC Stark-shift spectroscopy finds shifts quadratic in drive amplitude and frequency. A displaced-frame calculation, supported by Floquet simulations, attributes the low-frequency suppression to cancellation between rotating and counter-rotating contributions. Difference-frequency driving implements an oscillator–readout-resonator swap in 82 ns, reducing oscillator excitation to an upper bound of 0.7%0.7\%0.7%, versus a 2.5%2.5\%2.5% steady-state thermal population; the transferred excitation subsequently dissipates on a 1.1 μs1.1\,\mu\mathrm{s}1.1μs timescale.
Encoding a dual-rail qubit in the two oscillators, the experiment uses a driven beam-splitter interaction for logical rotations and spin-locking. Drive-dependent decay measurements show suppression of quasistatic detuning noise consistent with second-order sensitivity scaling inversely with interaction strength. Post-selected spin-locking decay saturates near 2 kHz, approximately fourfold below the unconditioned rate. Clifford randomized benchmarking with 25-ns logical X(π/2)X(\pi/2)X(π/2) gates gives errors per Clifford of 5.6×10−45.6\times10^{-4}5.6×10−4 without post-selection and 1.5×10−41.5\times10^{-4}1.5×10−4 after an end-of-sequence erasure check.
The stated limitations are oscillator lifetimes for unconditioned performance, measurement-induced transitions for the reset-population bound, and missed loss-then-heating events with only one erasure check. Mid-circuit detection using an additional ancilla and entangling gates between encoded qubits remain proposed extensions.
Quantum error correction using erasure qubits offers higher fault-tolerant thresholds and improved scaling by converting dominant physical errors into detectable erasures. In superconducting circuits, erasure qubits can be constructed using the dual-rail approach, which, however, requires additional qubit-count overhead and tailored coupling elements. Here, we demonstrate a hardware-efficient scheme that operates transmon qutrits as erasure qubits, which is compatible with standard superconducting circuit-QED hardware. The logical states ∣0L⟩\ket{0_\text{L}}∣0L​⟩ and ∣1L⟩\ket{1_\text{L}}∣1L​⟩ are represented by the ground and second excited states, while the dominant relaxation errors can be detected via an ancilla qubit using a microwave-activated two-qutrit SWAP gate. We demonstrate a logical qubit T1T_1T1​ lifetime exceeding 500 μs500\,μ\mathrm{s}500μs, post-selected with repeated mid-circuit erasure detection, which is ten times longer than the T1T_1T1​ time of the transmon physical qubit. Coherence times beyond 300 μs300\,μ\mathrm{s}300μs are achieved using dynamical decoupling. Single-qubit gate operations reach average Clifford gate infidelity on the order of 10−410^{-4}10−4. We further demonstrate dual-purposing an ancilla qubit for both erasure detection and parity checking, showing heralded generation of Bell states between erasure qubits. These results suggest that mainstream architectures of transmon qubit arrays may already be capable of implementing erasure-based QEC strategies for hardware-efficient fault-tolerant quantum computing.
Erasure qubits -- qubits designed to have an error profile that is dominated by detectable leakage errors -- are a promising way to cut down the resources needed for quantum error correction. There have been several recent experiments demonstrating erasure qubits in superconducting quantum processors, most notably the dual-rail qubit defined by the one-photon subspace of two coupled cavities. An outstanding challenge is that the ancillary transmons needed to facilitate erasure checks and two-qubit gates introduce a substantial amount of noise, limiting the benefits of working with erasure-biased qubits. Here, we show how to suppress the adverse effects of transmon-induced noise while performing erasure checks or two-qubit gates. We present control schemes for these operations that suppress erasure check errors by three orders of magnitude and reduce the logical two-qubit gate infidelities by up to three orders of magnitude.
Increasing the fidelity of single-qubit gates requires a combination of faster pulses and increased qubit coherence. However, these requirements can be contradictory. Additionally, increasing the drive power can heat the qubit’s environment and degrade coherence. In this work, we circumvent this issue and achieve rapid gates by pumping a transmon’s native Kerr at approximately one third of the qubit’s resonant frequency. The subharmonic Rabi rate of the process is proportional to applied drive amplitude cubed, allowing for rapid gates. In addition, we demonstrate that filtering can be used to protect the qubit’s coherence while performing rapid gates. Single qubit gates as short as 37.4 ns are demonstrated with fidelity of 99.91%. We present theoretical calculations indicating that drive induced multi-photon decay will not limit qubit lifetime; calculated power absorption also indicates that this technique could reduce cryostat heating for fast gates, a vital requirement for large-scale quantum computers. There is a trade-off between achieving fast qubit control and preserving long qubit lifetimes. In this work, the authors demonstrate single qubit gates by driving a transmon qubit parametrically at 1/3 of its frequency, creating fast, high-fidelity gates while protecting the qubit lifetime and mitigating heating.
Quantum computing is a relatively new computing paradigm that leverages entanglement to implement algorithms beyond the reach of classical hardware. Superconducting quantum circuits have emerged as a platform to build quantum processors, with demonstrations of quantum supremacy over classical supercomputers and quantum error correction beyond fault tolerance. However, current noisy devices require significant improvements to unlock the full potential of quantum algorithms.This thesis investigates intrinsic noise channels in superconducting circuits and the design of noise-resilient qubits. By characterizing high-quality superconducting resonators, we identify lossy dielectric materials at the interfaces as the dominant loss mechanism, which we mitigate via targeted surface treatments. Subsequently, we leverage Josephson junction nonlinearity to engineer noise-biased qubits utilizing the Kerr parametric oscillator (KPO). By analyzing the efficiency of strong, far-off-resonance driving to facilitate three- and four-wave mixing processes, we demonstrate high-fidelity operations on Fock, Kerr-cat, and dual-rail qubits. For the Kerr-cat qubit, we introduce a novel 2D architecture that enables strong light-matter coupling with suppressed Purcell decay, yielding millisecond-scale bit-flip lifetimes. Within this same architecture, we demonstrate a longitudinal qubit readout with a 99.6%99.6\%99.6% quantum nondemolition score, alongside a high-fidelity universal single-qubit gate set, all while maintaining bit-flip error suppression. Finally, we exploit the efficient wave-mixing of strongly coupled, far-detuned KPOs to realize a dynamically protected dual-rail qubit exhibiting both erasure bias and high-fidelity single-qubit gates.
Superconducting quantum circuits have emerged as a leading platform for building large-scale quantum computers, owing to their ability to engineer strong, highly tunable interactions. However, achieving high-fidelity quantum operations requires overcoming the fundamental isolation-andcontrol challenge: qubits must be well-isolated from their electromagnetic environment to maintain long coherence times, yet they require strong external coupling for fast control, readout, and initialization. In current architectures, this trade-off often demands complex auxiliary circuitry that can introduce additional noise and thermal loads. This thesis presents novel circuit designs and control techniques to address the isolation-and-control challenge in superconducting transmon qubits. First, we introduce integrated on-chip filters, in particular, 𝜆/4 and 𝜆/2 transmission line filters that exhibit a stopband at the qubit frequency. This design protects the qubit from Purcell decay, yielding up to a 200-fold improvement in the energy relaxation time 𝑇1 at the stopband. To achieve fast single-qubit gates despite this isolation, we employ subharmonic driving, demonstrating sub-ten-nanosecond control and Rabi oscillations with a 12-ns pulse duration while significantly reducing the cryogenic thermal load. Building upon these static filters, we propose and experimentally demonstrate the quantum dial, a dynamically tunable band-stop filter consisting of a series array of direct-current superconducting quantum interference devices. The quantum dial enables on-demand tuning of the qubit–environment coupling, including a reduction of 𝑇1 from over 150 μs to roughly 200 ns, while introducing minimal ac Stark shifts. We demonstrate its versatility by dialing between three operational regimes: an idle state with 99.99% fidelity, a control state enabling 99.9% fidelity for 40-ns single-qubit gates at −110 dBm, and a strongly coupled state for unconditional, state-independent qubit reset. Furthermore, the quantum dial enables qubit thermometry close to the quantum-Fisherinformation bound, with a noise-equivalent temperature down to 0.6 mK/√Hz at 60 mK. Alongside the development of these dedicated control architectures, this thesis contributes to the broader framework of circuit quantum electrodynamics by advancing specific microwave engineering and characterization techniques. In particular, we explore the miniaturization of circuit footprints through the realization of compact sub-gigahertz inductor-capacitor resonators. Additionally, we contribute to the optimization of unconditional qubit reset using a single-junction quantum-circuit refrigerator, and to the advanced characterization of microwave fields via computed tomography of propagating microwave photons. In summary, these results demonstrate fixed and tunable drive-line filters that suppress idle-state radiative decay while preserving selected control, reset, and thermometry operations. By replacing static coupling compromises with temporally programmable environments, these architectures offer a promising route to reducing noise, mitigating crosstalk, and accelerating error-correction cycles in future superconducting quantum processors.
Quantum error correction with erasure qubits promises significant advantages over standard error correction due to favorable thresholds for erasure errors. To realize this advantage in practice requires a qubit for which nearly all errors are such erasure errors, and the ability to check for erasure errors without dephasing the qubit. We demonstrate that a “dual-rail qubit” consisting of a pair of resonantly coupled transmons can form a highly coherent erasure qubit, where transmon T 1 errors are converted into erasure errors and residual dephasing is strongly suppressed, leading to millisecond-scale coherence within the qubit subspace. We show that single-qubit gates are limited primarily by erasure errors, with erasure probability p erasure = 2.19 ( 2 ) × 10 − 3 per gate while the residual errors are ∼ 40 times lower. We further demonstrate midcircuit detection of erasure errors while introducing < 0.1 % dephasing error per check. Finally, we show that the suppression of transmon noise allows this dual-rail qubit to preserve high coherence over a broad tunable operating range, offering an improved capacity to avoid frequency collisions. This work establishes transmon-based dual-rail qubits as an attractive building block for hardware-efficient quantum error correction. Published by the American Physical Society 2024