arXiv:2609.28881
Reconfigurable Bus-based Quantum Router for Modular Superconducting Processors
Benzheng Yuan, chaojie Zhang, Yangyang Fei, Chuanbing Han, Haoran He, Huihui Sun, Bo Zhao, Fudong Liu, Weilong Wang, Zheng Shan
Abstract
Scaling superconducting quantum processors requires interconnects that provide both non-local connectivity and parallel entangling operations. While current quantum routers offer greater connectivity than nearest-neighbour topologies, their support for parallel, independently addressable two-qubit gates remains fundamentally limited, imposing severe compilation overheads that constitute a critical bottleneck. Here we introduce a bus-based reconfigurable quantum router that enables parallel controlled-$Z$ (CZ) gates for modular superconducting processors. Constructed from a flux-tunable SQUID network, the router selectively connects interface qubits to two shared buses, allowing destructive interference to suppress idle interactions while supporting two disjoint CZ gates in parallel. Full-system Hamiltonian simulations yield parallel-gate infidelities ranging from $7.9\times10^{-4}$ to $1.8\times10^{-3}$ under the operating conditions considered, and an open-system analysis identifies the coherence requirements for high-fidelity operation. We further assess the circuit-level consequences using hardware-aware compilation and resource-constrained scheduling. For the 36-qubit quantum Fourier transform (QFT), QAOA-MaxCut, and random-pairing circuits, the router reduces the median SWAP count by up to $34\%$ and the native CZ count by up to $20\%$ relative to a matched two-dimensional grid. Circuit-depth reductions are workload-dependent, reaching $20\%$ for QAOA-MaxCut but remaining negligible for the QFT despite its lower gate count. These results show that enhanced connectivity and schedulable parallelism provide complementary benefits for connectivity-intensive algorithms, establishing the router as a compiler-visible hardware resource and providing a scalable architectural pathway toward constructing highly connected modular superconducting quantum processors.
AI Summary
The paper asks whether a superconducting inter-module router can provide reconfigurable connectivity while supporting independently addressable parallel entangling gates, and whether these capabilities reduce compiled-circuit overhead. It proposes four interface qubits connected through eight flux-tunable SQUID couplers to two shared resonator buses. Interference between direct and coupler-mediated pathways suppresses idle coupling; assigning disjoint qubit pairs to different buses permits two simultaneous CZ gates. Numerical diagonalization and pulse optimization use a 14-mode Duffing Hamiltonian, with qubits and couplers truncated to three levels and buses to two. Simulations report sub-kilohertz idle interqubit ZZ coupling and closed-system parallel-operation infidelities of $9.4\times10^{-4}$, $1.8\times10^{-3}$, and $7.9\times10^{-4}$ for the three disjoint pairings. A first-order dissipative analysis including interface-qubit relaxation and dephasing gives a symmetric coherence requirement of $T_1=T_\phi\approx237\,\mu\mathrm{s}$ for all configurations to exceed $99.5\%$ fidelity. Hardware-aware SABRE compilation over 100 seeds, followed by resource-constrained scheduling, compares modular router and grid architectures. At 36 qubits, QFT, QAOA-MaxCut, and random-pairing benchmarks show approximately $19$–$34\%$ fewer SWAPs and $10$–$20\%$ fewer native CZs. Median depth reductions reach $20\%$ for QAOA and $15\%$ for random pairing, but are negligible for QFT. The proposal is not experimentally demonstrated. Coherence estimates omit bus loss, coupler decoherence, thermal photons, and control noise. Compilation assumes unit-duration native gates and selects between grid- and router-compiled candidates. Larger implementations face frequency crowding, Purcell decay, finite bus capacity, and scheduling conflicts; multi-lane or hierarchical extensions are suggested rather than validated.
Central claim may not hold: The reported gate fidelities use two-level truncations of harmonic buses that exclude accessible multiphoton states, without a convergence test establishing fidelity for the stated physical model. The negative Lane-A coupler–bus coupling required by the simulated cancellation mechanism is not obtained from the supplied capacitance-based circuit derivation and cannot be explained solely by rephasing modes. The written decoherence expansion omits the nonzero coherent-error baseline, so the equations presented do not establish the quoted coherence requirement for 99.5% total gate fidelity. The circuit Lagrangian double-counts qubit self-terms and quadruple-counts bus self-terms relative to the final Hamiltonian.
Written by gpt-6.1-sol from the paper's full text. Automated: it can be wrong.
- Comments
- 25 pages, 7 figures