Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2609.19280

A Square-Root Barrier to Quantum Gate Speed under Linear Coupling

Pablo Restrepo Gaviria, Mischa P. Woods

quant-phmath-phphysics.comp-phSubmitted Sep 16, 2026• Announced Sep 18, 2026• 0 citations• Revised Nov 3, 2026 (v2)
v1 · Sep 16, 2026v2 · Nov 3, 2026
arXivHTMLPDF

Abstract

Faster quantum gates can reduce the decoherence accumulated during a computation, but in superconducting processors, speeding up gates often involves stronger microwave pulses, which can increase leakage, off-resonant excitation, stray-field errors, and crosstalk. This creates a central energy--speed--error tradeoff: can quantum state engineering make a gate faster without paying proportionally more drive energy? We address this question by treating the driving pulse as a quantum bosonic field rather than a classical waveform. For a finite-dimensional system coupled linearly to that field, we prove that gate transition rates at fixed trace distance between the initial and final system states grow at most as the square root of the pulse energy, under pulse-uniformity conditions, without assuming an upper bound on the coupling strength. The bound permits arbitrary pulse states, including squeezed and non-Gaussian states, as well as drive--system entanglement and back action; coherent Gaussian pulses attain its energy exponent. Thus squeezing or other state engineering alone cannot replace the square-root energy law of a conventional linear drive by the linear scaling allowed by general quantum speed limits. Achieving that improvement requires changing the interaction class, in addition to using a suitable nonclassical pulse, thereby identifying interaction nonlinearity as an essential resource for relaxing the practical gate-speed error tradeoff.

AI Summary

Can squeezing or other nonclassical pulse engineering improve the familiar square-root dependence of gate rate on drive energy without changing a linear system–field interaction? The paper studies a finite-dimensional system coupled to a bosonic continuum through $V=\sigma\otimes B+\sigma^\dagger\otimes B^\dagger$, with $B=\int g(k)a_k\,dk$ and $\|\sigma\|=1$. It allows mixed, non-Gaussian, initially correlated states and exact entangling dynamics. For an interaction-picture system-state transition of trace distance $\delta>0$ over duration $\Delta t$, it proves $\omega_{\rm gate}=2\pi/\Delta t\le(4\pi/\delta)\sqrt{C_gC_{\rm fld}E}$, where $C_g=\int|g(k)|^2/\omega(k)\,dk$, $E$ is total energy above the interacting spectral bottom, and field energy during the transition obeys $E_F(t)\le C_{\rm fld}E$. The proof bounds the rate of the endpoint-optimal distinguishing measurement using commutators and energy-weighted Cauchy–Schwarz inequalities, then integrates it. Coherent Gaussian pulses attain the energy exponent. For energy-dependent Hamiltonian families, a dimensionless square-root bound follows either from uniform lower stability or from additional quiet-window activation and infrared-uniformity conditions. These conditions control effective coupling without an explicit coupling-strength ceiling. A comparison with a previously established nonlinear autonomous construction gives achievable exponents arbitrarily close to one outside the linear-interaction class. The conclusions are conditional on uniform resource assumptions; they do not exclude faster scaling when those assumptions fail. Endpoint state separation is necessary but insufficient to certify a gate channel on arbitrary inputs. The results constrain an asymptotic energy exponent, not a quantified improvement in hardware error budgets.

Little sign of AI-generated textStrong assumptionsOverclaims

Written by gpt-6.1-sol from the paper's full text. Automated: it can be wrong.

Comments
Proves same bounds but under much weaker assumptions. Added operational interpretation of physical assumptions. 5 + 36 pages

Related papers

Competition of decoherence and quantum speed limits for quantum-gate fidelity in the Jaynes-Cummings model

Sagar Silva Pratapsi, Lorenzo Buffoni, Stefano Gherardini

Quantum computers are operated by external driving fields, such as lasers, microwaves, or transmission lines, that execute logical operations on multiqubit registers, leaving the system in a pure state. However, the drive and the logical system might become correlated in such a way that, after tracing out the degrees of freedom of the driving field, the output state will not be pure. Previous works have pointed out that the resulting error scales inversely with the energy of the drive, thus imposing a limit on the energy efficiency of quantum computing. In this study, focusing on the Jaynes-Cummings model, we show how the same scaling can be seen as a consequence of two competing phenomena: the entanglement-induced error, which grows with time, and a minimal time for computation imposed by quantum speed limits. This evidence is made possible by quantifying, at any time, the computation error via the spectral radius associated with the density operator of the logical qubit. Moreover, we also prove that, in order to attain a given target state at a chosen fidelity, it is energetically more efficient to perform a single driven evolution of the logical qubits rather than to split the computation in subroutines, each operated by a dedicated pulse. Published by the American Physical Society 2024

arXiv:2305.05019•Physical Review Research•Jun 20, 2024•3 citations

Single-qubit quantum gate at an arbitrary speed

Seongjin Ahn, Park, Kichan, Daehee Cho +3 more

Quantum information processing comprises physical processes, which obey the quantum speed limit (QSL): high speed requires strong driving. Single-qubit gates using Rabi oscillation, which is based on the rotating wave approximation (RWA), satisfy this bound in the form that the gate time $T$ is inversely proportional to the Rabi frequency $Ω$, characterizing the driving strength. However, if the gate time is comparable or shorter than the qubit period $T_{0} \equiv 2π/ ω_{0}$, the RWA actually breaks down since the Rabi frequency has to be large compared to the qubit frequency $ω_{0}$ due to the QSL, which is given as $T \gtrsim π/Ω$. We show that it is possible to construct a universal set of single-qubit gates at this strong-coupling and ultrafast regime, by adjusting the central frequency $ω$ and the Rabi frequency $Ω$ of the driving pulse. We observe a transition in the scaling behavior of the central frequency from the long-gate time regime ($T \gg T_{0}$) to the short-gate time ($T \ll T_{0}$) regime. In the former, the central frequency is nearly resonant to the qubit, i.e., $ω\simeq ω_{0}$, whereas in the latter, the central frequency is inversely proportional to the gate time, i.e., $ω\sim π/T$. We identify the transition gate time at which the scaling exponent $n$ of the optimal central frequency $ω\sim T^{n}$ changes from $n=0$ to $n=-1$.

arXiv:2412.19561•Dec 27, 2024•0 citations

Speed limits for two-qubit gates with weakly anharmonic qubits

Sahel Ashhab, Fumiki Yoshihara, Tomoko Fuse +3 more

We consider the implementation of two-qubit gates when the physical systems used to realize the qubits possess additional quantum states in the accessible energy range. We use optimal control theory to determine the maximum achievable gate speed for two-qubit gates in the qubit subspace of the many-level Hilbert space, and we analyze the effect of the additional quantum states on the gate speed. We identify two competing mechanisms. On one hand, higher energy levels are generally more strongly coupled to each other. Under suitable conditions, this stronger coupling can be utilized to make two-qubit gates significantly faster than the reference value based on simple qubits. On the other hand, a weak anharmonicity constrains the speed at which the system can be adequately controlled: according to the intuitive picture, faster operations require stronger control fields, which are more likely to excite higher levels in a weakly anharmonic system, which in turn leads to faster decoherence and uncontrolled leakage outside the qubit space. To account for this constraint, we modify the pulse optimization algorithm to avoid pulses that lead to appreciable population of the higher levels. In this case, we find that the presence of the higher levels can lead to a significant reduction in the maximum achievable gate speed. We also compare the optimal-control gate speeds with those obtained using the cross-resonance or selective-darkening gate protocol. We find that this protocol, with some parameter optimization, can be used to achieve a relatively fast implementation of the controlled-NOT gate. These results can help the search for optimized gate implementations in realistic quantum computing architectures, such as those based on superconducting circuits. They also provide guidelines for desirable conditions on anharmonicity that would allow optimal utilization of the higher levels to achieve fast quantum gates.

arXiv:2109.01469•Physical Review A•Apr 25, 2022•16 citations

Optimal Quantum Driving for Single-Qubit Gates

Joni Ikonen

Quantum computers store and manipulate information in individual quantized energy levels. These devices, not yet realized in their full potential, have the ability to perform certain computational tasks more efficiently than any classical computer. One possible way to implement a quantum computer is to use superconducting circuits controlled by single-mode electromagnetic fields. These circuits constitute the physical quantum bits, or qubits, that are used to store quantum information. A complete, fault-tolerant quantum computer potentially consists of at least millions of physical qubits which are grouped to form fault-tolerant logical qubits. Controlling each physical qubit individually requires a great amount of energy, and hence a future challenge is to reduce the energy consumption in qubit control while maintaining the high precision. In this thesis, we derive a fundamental upper bound for the gate fidelity of a single-qubit not gate implemented with a single resonant driving pulse. It is shown that the upper bound approaches unity inversely proportionally to the increasing mean photon number of the pulse. Furthermore, we find that the upper bound is achieved with an optimal superposition of squeezed states. The typically employed coherent state produces twice as high gate error as the corresponding optimal state. In addition, we present and numerically study a correction protocol that allows using the same drive state for multiple qubit operations. This sustained state is refreshed by sequentially coupling ancillary qubits to it, effectively resetting it and removing entanglement with the previously operated qubits. Thus our protocol allows using the same drive state to implement not gates for different qubits indefinitely, and hence provides a possible route to energy-efficient large-scale quantum computing.

Työväentutkimus Vuosikirja•Jan 1, 2016•0 citations

Pulse Shaping for Superconducting Qubits

Animesh Patra, Ankur Raina

High-fidelity control of superconducting qubits requires carefully shaped microwave pulses to avoid several different kinds of error at once. This article is a pedagogical bridging text aimed at upper-level undergraduate and early graduate students who have completed an introductory quantum mechanics course and a first course in quantum computing or quantum information, but who have not yet encountered the physical implementation of qubit gates. We integrate physical intuition for pulse design, analytical gate-level descriptions, and practical hardware considerations into a single, derivation-driven narrative, with explicit learning objectives. We begin with simple pulse envelopes and their spectral properties, showing how finite bandwidth produces leakage outside the computational subspace. This motivates the derivative removal by adiabatic gate (DRAG) technique, which we derive explicitly using the Magnus expansion, obtaining a clear, order-by-order account of which physical error channel appears at which order and why DRAG's cancellation is necessarily incomplete. We discuss the practical hardware realities of control pulse generation, focusing on arbitrary waveform generators (AWG), local oscillators (LO), and IQ mixing. Finally, we extend the discussion to two-qubit operation via the cross-resonance gate, and interpret how driving the control qubit at the target qubit's transition frequency necessarily produces several unwanted interaction terms alongside the desired one, and how successive generations of pulse-engineering strategies have been designed to suppress them.

quant-pharXiv:2604.21565•Apr 24, 2026•2 citations

Mitigating crosstalk errors for simultaneous single-qubit gates on a superconducting quantum processor

Jaap J. Wesdorp, Eric Hyyppä, Joona Andersson +61 more

Single-qubit gates on superconducting quantum processors are typically implemented using microwave pulses applied through dedicated control lines. However, these microwave pulses may also drive other qubits due to crosstalk arising from capacitive coupling and wavefunction overlap in systems with closely spaced transition frequencies. Crosstalk and frequency crowding increase errors during simultaneous single-qubit operations relative to isolated gates, thus forming a major bottleneck for scaling superconducting quantum processors. In this work, we combine model-based qubit frequency optimization with pulse shaping to demonstrate crosstalk error mitigation in single-qubit gates on a 49-qubit superconducting quantum processor. We introduce and experimentally verify an analytical model of simultaneous single-qubit gate error caused by microwave crosstalk that depends on a given pulse shape. By employing a model-based optimization strategy of qubit frequencies, we minimize the crosstalk-induced error across the processor and achieve a mean simultaneous single-qubit gate fidelity of 99.96% for a 16-ns gate duration, approaching the mean individual gate fidelity. To further reduce the simultaneous error and required qubit frequency bandwidth on high-crosstalk qubit pairs, we introduce a crosstalk transition suppression (CTS) pulse shaping technique that minimizes the spectral energy around transitions inducing leakage and crosstalk errors. Finally, we combine CTS with model-based frequency optimization across the device and experimentally show a systematic reduction in the required qubit frequency bandwidth for high-fidelity simultaneous gates, supported by simulations of systems with up to 1000 qubits. By alleviating constraints on qubit frequency bandwidth for parallel single-qubit operations, this work represents an important step for scaling towards larger quantum processors.

quant-pharXiv:2603.11018•PRX Quantum•Mar 12, 2026•15 citations
Faster quantum gates can reduce the decoherence accumulated during a computation, but in superconducting processors, speeding up gates often involves stronger microwave pulses, which can increase leakage, off-resonant excitation, stray-field errors, and crosstalk. This creates a central energy--speed--error tradeoff: can quantum state engineering make a gate faster without paying proportionally more drive energy? We address this question by treating the driving pulse as a quantum bosonic field rather than a classical waveform. For a finite-dimensional system coupled linearly to that field, we prove that gate transition rates at fixed trace distance between the initial and final system states grow at most as the square root of the pulse energy, under pulse-uniformity conditions, without assuming an upper bound on the coupling strength. The bound permits arbitrary pulse states, including squeezed and non-Gaussian states, as well as drive--system entanglement and back action; coherent Gaussian pulses attain its energy exponent. Thus squeezing or other state engineering alone cannot replace the square-root energy law of a conventional linear drive by the linear scaling allowed by general quantum speed limits. Achieving that improvement requires changing the interaction class, in addition to using a suitable nonclassical pulse, thereby identifying interaction nonlinearity as an essential resource for relaxing the practical gate-speed error tradeoff.
Can squeezing or other nonclassical pulse engineering improve the familiar square-root dependence of gate rate on drive energy without changing a linear system–field interaction? The paper studies a finite-dimensional system coupled to a bosonic continuum through V=σ⊗B+σ†⊗B†V=\sigma\otimes B+\sigma^\dagger\otimes B^\daggerV=σ⊗B+σ†⊗B†, with B=∫g(k)ak dkB=\int g(k)a_k\,dkB=∫g(k)ak​dk and ∥σ∥=1\|\sigma\|=1∥σ∥=1. It allows mixed, non-Gaussian, initially correlated states and exact entangling dynamics.
For an interaction-picture system-state transition of trace distance δ>0\delta>0δ>0 over duration Δt\Delta tΔt, it proves ωgate=2π/Δt≤(4π/δ)CgCfldE\omega_{\rm gate}=2\pi/\Delta t\le(4\pi/\delta)\sqrt{C_gC_{\rm fld}E}ωgate​=2π/Δt≤(4π/δ)Cg​Cfld​E​, where Cg=∫∣g(k)∣2/ω(k) dkC_g=\int|g(k)|^2/\omega(k)\,dkCg​=∫∣g(k)∣2/ω(k)dk, EEE is total energy above the interacting spectral bottom, and field energy during the transition obeys EF(t)≤CfldEE_F(t)\le C_{\rm fld}EEF​(t)≤Cfld​E. The proof bounds the rate of the endpoint-optimal distinguishing measurement using commutators and energy-weighted Cauchy–Schwarz inequalities, then integrates it. Coherent Gaussian pulses attain the energy exponent.
For energy-dependent Hamiltonian families, a dimensionless square-root bound follows either from uniform lower stability or from additional quiet-window activation and infrared-uniformity conditions. These conditions control effective coupling without an explicit coupling-strength ceiling. A comparison with a previously established nonlinear autonomous construction gives achievable exponents arbitrarily close to one outside the linear-interaction class.
The conclusions are conditional on uniform resource assumptions; they do not exclude faster scaling when those assumptions fail. Endpoint state separation is necessary but insufficient to certify a gate channel on arbitrary inputs. The results constrain an asymptotic energy exponent, not a quantified improvement in hardware error budgets.
Quantum computers are operated by external driving fields, such as lasers, microwaves, or transmission lines, that execute logical operations on multiqubit registers, leaving the system in a pure state. However, the drive and the logical system might become correlated in such a way that, after tracing out the degrees of freedom of the driving field, the output state will not be pure. Previous works have pointed out that the resulting error scales inversely with the energy of the drive, thus imposing a limit on the energy efficiency of quantum computing. In this study, focusing on the Jaynes-Cummings model, we show how the same scaling can be seen as a consequence of two competing phenomena: the entanglement-induced error, which grows with time, and a minimal time for computation imposed by quantum speed limits. This evidence is made possible by quantifying, at any time, the computation error via the spectral radius associated with the density operator of the logical qubit. Moreover, we also prove that, in order to attain a given target state at a chosen fidelity, it is energetically more efficient to perform a single driven evolution of the logical qubits rather than to split the computation in subroutines, each operated by a dedicated pulse. Published by the American Physical Society 2024
Quantum information processing comprises physical processes, which obey the quantum speed limit (QSL): high speed requires strong driving. Single-qubit gates using Rabi oscillation, which is based on the rotating wave approximation (RWA), satisfy this bound in the form that the gate time TTT is inversely proportional to the Rabi frequency ΩΩΩ, characterizing the driving strength. However, if the gate time is comparable or shorter than the qubit period T0≡2π/ω0T_{0} \equiv 2π/ ω_{0}T0​≡2π/ω0​, the RWA actually breaks down since the Rabi frequency has to be large compared to the qubit frequency ω0ω_{0}ω0​ due to the QSL, which is given as T≳π/ΩT \gtrsim π/ΩT≳π/Ω. We show that it is possible to construct a universal set of single-qubit gates at this strong-coupling and ultrafast regime, by adjusting the central frequency ωωω and the Rabi frequency ΩΩΩ of the driving pulse. We observe a transition in the scaling behavior of the central frequency from the long-gate time regime (T≫T0T \gg T_{0}T≫T0​) to the short-gate time (T≪T0T \ll T_{0}T≪T0​) regime. In the former, the central frequency is nearly resonant to the qubit, i.e., ω≃ω0ω\simeq ω_{0}ω≃ω0​, whereas in the latter, the central frequency is inversely proportional to the gate time, i.e., ω∼π/Tω\sim π/Tω∼π/T. We identify the transition gate time at which the scaling exponent nnn of the optimal central frequency ω∼Tnω\sim T^{n}ω∼Tn changes from n=0n=0n=0 to n=−1n=-1n=−1.
We consider the implementation of two-qubit gates when the physical systems used to realize the qubits possess additional quantum states in the accessible energy range. We use optimal control theory to determine the maximum achievable gate speed for two-qubit gates in the qubit subspace of the many-level Hilbert space, and we analyze the effect of the additional quantum states on the gate speed. We identify two competing mechanisms. On one hand, higher energy levels are generally more strongly coupled to each other. Under suitable conditions, this stronger coupling can be utilized to make two-qubit gates significantly faster than the reference value based on simple qubits. On the other hand, a weak anharmonicity constrains the speed at which the system can be adequately controlled: according to the intuitive picture, faster operations require stronger control fields, which are more likely to excite higher levels in a weakly anharmonic system, which in turn leads to faster decoherence and uncontrolled leakage outside the qubit space. To account for this constraint, we modify the pulse optimization algorithm to avoid pulses that lead to appreciable population of the higher levels. In this case, we find that the presence of the higher levels can lead to a significant reduction in the maximum achievable gate speed. We also compare the optimal-control gate speeds with those obtained using the cross-resonance or selective-darkening gate protocol. We find that this protocol, with some parameter optimization, can be used to achieve a relatively fast implementation of the controlled-NOT gate. These results can help the search for optimized gate implementations in realistic quantum computing architectures, such as those based on superconducting circuits. They also provide guidelines for desirable conditions on anharmonicity that would allow optimal utilization of the higher levels to achieve fast quantum gates.
Quantum computers store and manipulate information in individual quantized energy levels. These devices, not yet realized in their full potential, have the ability to perform certain computational tasks more efficiently than any classical computer. One possible way to implement a quantum computer is to use superconducting circuits controlled by single-mode electromagnetic fields. These circuits constitute the physical quantum bits, or qubits, that are used to store quantum information. A complete, fault-tolerant quantum computer potentially consists of at least millions of physical qubits which are grouped to form fault-tolerant logical qubits. Controlling each physical qubit individually requires a great amount of energy, and hence a future challenge is to reduce the energy consumption in qubit control while maintaining the high precision. In this thesis, we derive a fundamental upper bound for the gate fidelity of a single-qubit not gate implemented with a single resonant driving pulse. It is shown that the upper bound approaches unity inversely proportionally to the increasing mean photon number of the pulse. Furthermore, we find that the upper bound is achieved with an optimal superposition of squeezed states. The typically employed coherent state produces twice as high gate error as the corresponding optimal state. In addition, we present and numerically study a correction protocol that allows using the same drive state for multiple qubit operations. This sustained state is refreshed by sequentially coupling ancillary qubits to it, effectively resetting it and removing entanglement with the previously operated qubits. Thus our protocol allows using the same drive state to implement not gates for different qubits indefinitely, and hence provides a possible route to energy-efficient large-scale quantum computing.
High-fidelity control of superconducting qubits requires carefully shaped microwave pulses to avoid several different kinds of error at once. This article is a pedagogical bridging text aimed at upper-level undergraduate and early graduate students who have completed an introductory quantum mechanics course and a first course in quantum computing or quantum information, but who have not yet encountered the physical implementation of qubit gates. We integrate physical intuition for pulse design, analytical gate-level descriptions, and practical hardware considerations into a single, derivation-driven narrative, with explicit learning objectives. We begin with simple pulse envelopes and their spectral properties, showing how finite bandwidth produces leakage outside the computational subspace. This motivates the derivative removal by adiabatic gate (DRAG) technique, which we derive explicitly using the Magnus expansion, obtaining a clear, order-by-order account of which physical error channel appears at which order and why DRAG's cancellation is necessarily incomplete. We discuss the practical hardware realities of control pulse generation, focusing on arbitrary waveform generators (AWG), local oscillators (LO), and IQ mixing. Finally, we extend the discussion to two-qubit operation via the cross-resonance gate, and interpret how driving the control qubit at the target qubit's transition frequency necessarily produces several unwanted interaction terms alongside the desired one, and how successive generations of pulse-engineering strategies have been designed to suppress them.
Single-qubit gates on superconducting quantum processors are typically implemented using microwave pulses applied through dedicated control lines. However, these microwave pulses may also drive other qubits due to crosstalk arising from capacitive coupling and wavefunction overlap in systems with closely spaced transition frequencies. Crosstalk and frequency crowding increase errors during simultaneous single-qubit operations relative to isolated gates, thus forming a major bottleneck for scaling superconducting quantum processors. In this work, we combine model-based qubit frequency optimization with pulse shaping to demonstrate crosstalk error mitigation in single-qubit gates on a 49-qubit superconducting quantum processor. We introduce and experimentally verify an analytical model of simultaneous single-qubit gate error caused by microwave crosstalk that depends on a given pulse shape. By employing a model-based optimization strategy of qubit frequencies, we minimize the crosstalk-induced error across the processor and achieve a mean simultaneous single-qubit gate fidelity of 99.96% for a 16-ns gate duration, approaching the mean individual gate fidelity. To further reduce the simultaneous error and required qubit frequency bandwidth on high-crosstalk qubit pairs, we introduce a crosstalk transition suppression (CTS) pulse shaping technique that minimizes the spectral energy around transitions inducing leakage and crosstalk errors. Finally, we combine CTS with model-based frequency optimization across the device and experimentally show a systematic reduction in the required qubit frequency bandwidth for high-fidelity simultaneous gates, supported by simulations of systems with up to 1000 qubits. By alleviating constraints on qubit frequency bandwidth for parallel single-qubit operations, this work represents an important step for scaling towards larger quantum processors.