Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2603.11018 · PRX Quantum

Mitigating crosstalk errors for simultaneous single-qubit gates on a superconducting quantum processor

Jaap J. Wesdorp, Eric Hyyppä, Joona Andersson, Janos Adam, Rohit Beriwal, Ville Bergholm, Saga Dahl, Simone Diego Fasciati, Alejandro Gomez Friero, Zheming Gao, Daria Gusenkova, Andrew Guthrie, Johannes Heinsoo, Tuukka Hiltunen, Keiran Holland, Amin Hosseinkhani, Sinan Inel, Joni Ikonen, Shan W. Jolin, Kristinn Juliusson, Seung-Goo Kim, Anton Komlev, Roope Kokkoniemi, Otto Koskinen, Joonas Kylmälä, Alessandro Landra, Julia Lamprich, Magdalena Lehmuskoski, Nizar Lethif, Per Liebermann, Tianyi Li, Aleksi Lintunen, Fabian Marxer, Kunal Mitra, Jakub Mrożek, Lucas Ortega, Miha Papič, Matti Partanen, Alexander Plyushch, Stefan Pogorzalek, Michael Renger, Jussi Ritvas, Sampo Saarinen, Indrajeet Sagar, Matthew Sarsby, Mykhailo Savytskyi, Ville Selinmaa, Ivan Takmakov, Brian Tarasinski, Francesca Tosto, David Vasey, Panu Vesanen, Jeroen Verjauw, Alpo Välimaa, Nicola Wurz, Hsiang-Sheng Ku, Frank Deppe, Juha Hassel, Caspar Ockeloen-Korppi, Wei Liu, Jani Tuorila, Chun Fai Chan, Attila Geresdi, Antti Vepsäläinen

quant-phSubmitted Mar 11, 2026• Announced Mar 12, 2026• 15 citations
arXivHTMLPDF

Abstract

Single-qubit gates on superconducting quantum processors are typically implemented using microwave pulses applied through dedicated control lines. However, these microwave pulses may also drive other qubits due to crosstalk arising from capacitive coupling and wavefunction overlap in systems with closely spaced transition frequencies. Crosstalk and frequency crowding increase errors during simultaneous single-qubit operations relative to isolated gates, thus forming a major bottleneck for scaling superconducting quantum processors. In this work, we combine model-based qubit frequency optimization with pulse shaping to demonstrate crosstalk error mitigation in single-qubit gates on a 49-qubit superconducting quantum processor. We introduce and experimentally verify an analytical model of simultaneous single-qubit gate error caused by microwave crosstalk that depends on a given pulse shape. By employing a model-based optimization strategy of qubit frequencies, we minimize the crosstalk-induced error across the processor and achieve a mean simultaneous single-qubit gate fidelity of 99.96% for a 16-ns gate duration, approaching the mean individual gate fidelity. To further reduce the simultaneous error and required qubit frequency bandwidth on high-crosstalk qubit pairs, we introduce a crosstalk transition suppression (CTS) pulse shaping technique that minimizes the spectral energy around transitions inducing leakage and crosstalk errors. Finally, we combine CTS with model-based frequency optimization across the device and experimentally show a systematic reduction in the required qubit frequency bandwidth for high-fidelity simultaneous gates, supported by simulations of systems with up to 1000 qubits. By alleviating constraints on qubit frequency bandwidth for parallel single-qubit operations, this work represents an important step for scaling towards larger quantum processors.

Comments
45 pages, 6 figures in the main text, 20 figures in the Appendices. Eric Hyyppä and Jaap J. Wesdorp contributed equally to this work

Related papers

Control and mitigation of microwave crosstalk effect with superconducting qubits

Ruixia Wang, Peng Zhao, Yirong Jin +1 more

Improving gate performance is vital for scalable quantum computing. Universal quantum computing also requires gate fidelity to reach a high level. For a superconducting quantum processor, which operates in the microwave band, the single-qubit gates are usually realized with microwave driving. The crosstalk between microwave pulses is a non-negligible error source. In this article, we propose an error mitigation scheme to address this crosstalk issue for single-qubit gates. There are three steps in our method. First, by controlling the detuning between qubits, the microwave induced classical crosstalk error can be constrained within the computational subspace. Second, by applying the general decomposition procedure, the arbitrary single-qubit gate can be decomposed as a sequence of X and virtual Z gates. Finally, by optimizing the parameters in virtual Z gates, the error constrained in the computational space can be corrected. Using our method, no additional compensation signals are needed, arbitrary single-qubit gate time will not be prolonged, and the circuit depth containing simultaneous single-qubit gates will also not increase. The simulation results show that, in a specific regime of qubit–qubit detuning, the infidelities of simultaneous single-qubit gates can be as low as that without microwave crosstalk.

arXiv:2207.08416•Applied Physics Letters•Oct 10, 2022•21 citations

Scalable Suppression of XY Crosstalk by Pulse-Level Control in Superconducting Quantum Processors

Hui-Hang Chen, Chiao-Hsuan Wang

As superconducting quantum processors continue to scale, high-performance quantum control becomes increasingly critical. In densely integrated architectures, unwanted interactions between nearby qubits give rise to crosstalk errors that limit operational performance. In particular, direct exchange-type (XY) interactions are typically minimized by designing large frequency detunings between neighboring qubits at the hardware level. However, frequency crowding in large-scale systems ultimately restricts the achievable frequency separation. While such XY coupling facilitates entangling gate operations, its residual presence poses a key challenge during single-qubit controls. Here, we propose a scalable pulse-level control framework, incorporating frequency modulation (FM) and dynamical decoupling (DD), to suppress XY crosstalk errors. This framework operates independently of coupling strengths, reducing calibration overhead and naturally supporting multi-qubit connectivity. Numerical simulations show orders-of-magnitude reductions in infidelity for both idle and single-qubit gates in a two-qubit system. We further validate scalability in a five-qubit layout, where crosstalk between a central qubit and four neighbors is simultaneously suppressed. Our crosstalk suppression framework provides a practical route toward high-fidelity operation in dense superconducting architectures.

quant-pharXiv:2601.05231•Physical Review Applied•Jan 9, 2026•1 citation

Quantum Crosstalk Analysis for Simultaneous Gate Operations on Superconducting Qubits

Peng Zhao, Kehuan Linghu, Zhiyuan Li +5 more

Maintaining or even improving gate performance with growing numbers of parallel controlled qubits is a vital requirement for fault-tolerant quantum computing.For superconducting quantum processors, though isolated one-or two-qubit gates have been demonstrated with high fidelity, implementing these gates in parallel commonly shows worse performance.Generally, this degradation is attributed to various crosstalks between qubits, such as quantum crosstalk due to residual inter-qubit coupling.An understanding of the exact nature of these crosstalks is critical to figuring out respective mitigation schemes and improved qubit architecture designs with low crosstalk.Here we give a theoretical analysis of quantum crosstalk impact on simultaneous gate operations in a qubit architecture, where fixed-frequency transmon qubits are coupled via a tunable bus, and sub-100-ns controlled-Z (CZ) gates can be realized by applying a baseband flux pulse on the bus.Our analysis shows that for microwave-driven single-qubit gates, the dressing from the qubit-qubit coupling can cause non-negligible cross-driving errors when qubits operate near frequency collision regions.During CZ gate operations, although unwanted nearest-neighbor interactions are nominally turned off, sub-MHz parasitic next-nearest-neighbor interactions involving spectator qubits can still exist, causing considerable leakage or control error when one operates qubit systems around these parasitic resonance points.To ensure high-fidelity simultaneous operations, a request could be raised to figure out a better way to balance the gate error from target qubit systems themselves and the error from nonparticipating spectator qubits.Overall, our analysis suggests that towards useful quantum processors, the qubit architecture should be examined carefully in the context of high-fidelity simultaneous gate operations in a scalable qubit lattice.

arXiv:2110.12570•PRX Quantum•Apr 1, 2022•133 citations

Parallel Quantum Gates via Scalable Subsystem-Optimized Robust Control

Xiaodong Yang, Ran Liu, Jun Li

Accurate and efficient implementation of parallel quantum gates is crucial for scalable quantum information processing. However, the unavoidable crosstalk between qubits in current noisy processors impedes the achievement of high gate fidelities and renders full Hilbert-space control optimization prohibitively difficult. Here, we overcome this challenge by reducing the full-system optimization to crosstalk-robust control over constant-sized subsystems, which dramatically reduces the computational cost. Our method effectively eliminates the leading-order gate operation deviations induced by crosstalk, thereby suppressing error rates. Within this framework, we construct analytical pulse solutions for parallel single-qubit gates and numerical pulses for parallel multi-qubit operations. We validate the proposed approach numerically across multiple platforms, including coupled nitrogen-vacancy centers, a nuclear-spin processor, and superconducting-qubit arrays with up to 200 qubits. As a result, the noise scaling is reduced from exponential to linear for parallel single-qubit gates, and an order-of-magnitude reduction is achieved for parallel multi-qubit gates. Moreover, our method does not require precise knowledge of crosstalk strengths and makes no assumption about the underlying qubit connectivity or lattice geometry, thereby establishing a scalable framework for parallel quantum control in large-scale quantum architectures.

quant-pharXiv:2601.01990•Physical Review A•Jan 6, 2026•1 citation

Mitigation of microwave crosstalk with parameterized single-qubit gate in superconducting quantum circuits

Zhihu Yang, Ruixia Wang, Ziting Wang +6 more

In superconducting qubit systems, microwave crosstalk among the qubit control lines is a prominent source of errors for gate operations, particularly when implemented simultaneously in a multiqubit system. In this work, we present an experimental study of crosstalk mitigation for the case of single-qubit gate operation, which involves the universal U3 gate decomposition into two Xπ/2 gates and three virtual Z gates. We demonstrate that by optimizing the virtual Z gate parameters, the crosstalk can be effectively mitigated, with the single-qubit gate fidelity recovered to the level comparable to that in the absence of crosstalk.

Applied Physics Letters•May 20, 2024•9 citations

Reducing Leakage of Single-Qubit Gates for Superconducting Quantum Processors Using Analytical Control Pulse Envelopes

Eric Hyyppä, Antti P. Vepsäläinen, Miha Papič +10 more

Improving the speed and fidelity of quantum logic gates is essential to reach quantum advantage with future quantum computers. However, fast logic gates lead to increased leakage errors in superconducting quantum processors based on qubits with low anharmonicity, such as transmons. To reduce leakage errors, we propose and experimentally demonstrate two new analytical methods, Fourier ansatz spectrum tuning derivative removal by adiabatic gate (FAST DRAG) and higher-derivative (HD) DRAG, both of which enable shaping single-qubit control pulses in the frequency domain to achieve stronger suppression of leakage transitions compared to previously demonstrated pulse shapes. Using the new methods to suppress the e f transition of a transmon qubit with an anharmonicity of − 212 MHz, we implement R X ( π / 2 ) gates achieving a leakage error below 3.0 × 10 − 5 down to a gate duration of 6.25 ns without the need for iterative closed-loop optimization. The obtained leakage error represents a 20-fold reduction in leakage compared to a conventional cosine DRAG pulse. Employing the FAST DRAG method, we further achieve an error per gate of ( 1.56 ± 0.07 ) × 10 − 4 at a 7.9-ns gate duration, outperforming conventional pulse shapes both in terms of error and gate speed. Furthermore, we study error-amplifying measurements for the characterization of temporal microwave control-pulse distortions, and demonstrate that non-Markovian coherent errors caused by such distortions may be a significant source of error for sub-10-ns single-qubit gates unless corrected using predistortion. Published by the American Physical Society 2024

arXiv:2402.17757•PRX Quantum•Sep 19, 2024•85 citations
Single-qubit gates on superconducting quantum processors are typically implemented using microwave pulses applied through dedicated control lines. However, these microwave pulses may also drive other qubits due to crosstalk arising from capacitive coupling and wavefunction overlap in systems with closely spaced transition frequencies. Crosstalk and frequency crowding increase errors during simultaneous single-qubit operations relative to isolated gates, thus forming a major bottleneck for scaling superconducting quantum processors. In this work, we combine model-based qubit frequency optimization with pulse shaping to demonstrate crosstalk error mitigation in single-qubit gates on a 49-qubit superconducting quantum processor. We introduce and experimentally verify an analytical model of simultaneous single-qubit gate error caused by microwave crosstalk that depends on a given pulse shape. By employing a model-based optimization strategy of qubit frequencies, we minimize the crosstalk-induced error across the processor and achieve a mean simultaneous single-qubit gate fidelity of 99.96% for a 16-ns gate duration, approaching the mean individual gate fidelity. To further reduce the simultaneous error and required qubit frequency bandwidth on high-crosstalk qubit pairs, we introduce a crosstalk transition suppression (CTS) pulse shaping technique that minimizes the spectral energy around transitions inducing leakage and crosstalk errors. Finally, we combine CTS with model-based frequency optimization across the device and experimentally show a systematic reduction in the required qubit frequency bandwidth for high-fidelity simultaneous gates, supported by simulations of systems with up to 1000 qubits. By alleviating constraints on qubit frequency bandwidth for parallel single-qubit operations, this work represents an important step for scaling towards larger quantum processors.
Improving gate performance is vital for scalable quantum computing. Universal quantum computing also requires gate fidelity to reach a high level. For a superconducting quantum processor, which operates in the microwave band, the single-qubit gates are usually realized with microwave driving. The crosstalk between microwave pulses is a non-negligible error source. In this article, we propose an error mitigation scheme to address this crosstalk issue for single-qubit gates. There are three steps in our method. First, by controlling the detuning between qubits, the microwave induced classical crosstalk error can be constrained within the computational subspace. Second, by applying the general decomposition procedure, the arbitrary single-qubit gate can be decomposed as a sequence of X and virtual Z gates. Finally, by optimizing the parameters in virtual Z gates, the error constrained in the computational space can be corrected. Using our method, no additional compensation signals are needed, arbitrary single-qubit gate time will not be prolonged, and the circuit depth containing simultaneous single-qubit gates will also not increase. The simulation results show that, in a specific regime of qubit–qubit detuning, the infidelities of simultaneous single-qubit gates can be as low as that without microwave crosstalk.
As superconducting quantum processors continue to scale, high-performance quantum control becomes increasingly critical. In densely integrated architectures, unwanted interactions between nearby qubits give rise to crosstalk errors that limit operational performance. In particular, direct exchange-type (XY) interactions are typically minimized by designing large frequency detunings between neighboring qubits at the hardware level. However, frequency crowding in large-scale systems ultimately restricts the achievable frequency separation. While such XY coupling facilitates entangling gate operations, its residual presence poses a key challenge during single-qubit controls. Here, we propose a scalable pulse-level control framework, incorporating frequency modulation (FM) and dynamical decoupling (DD), to suppress XY crosstalk errors. This framework operates independently of coupling strengths, reducing calibration overhead and naturally supporting multi-qubit connectivity. Numerical simulations show orders-of-magnitude reductions in infidelity for both idle and single-qubit gates in a two-qubit system. We further validate scalability in a five-qubit layout, where crosstalk between a central qubit and four neighbors is simultaneously suppressed. Our crosstalk suppression framework provides a practical route toward high-fidelity operation in dense superconducting architectures.
Maintaining or even improving gate performance with growing numbers of parallel controlled qubits is a vital requirement for fault-tolerant quantum computing.For superconducting quantum processors, though isolated one-or two-qubit gates have been demonstrated with high fidelity, implementing these gates in parallel commonly shows worse performance.Generally, this degradation is attributed to various crosstalks between qubits, such as quantum crosstalk due to residual inter-qubit coupling.An understanding of the exact nature of these crosstalks is critical to figuring out respective mitigation schemes and improved qubit architecture designs with low crosstalk.Here we give a theoretical analysis of quantum crosstalk impact on simultaneous gate operations in a qubit architecture, where fixed-frequency transmon qubits are coupled via a tunable bus, and sub-100-ns controlled-Z (CZ) gates can be realized by applying a baseband flux pulse on the bus.Our analysis shows that for microwave-driven single-qubit gates, the dressing from the qubit-qubit coupling can cause non-negligible cross-driving errors when qubits operate near frequency collision regions.During CZ gate operations, although unwanted nearest-neighbor interactions are nominally turned off, sub-MHz parasitic next-nearest-neighbor interactions involving spectator qubits can still exist, causing considerable leakage or control error when one operates qubit systems around these parasitic resonance points.To ensure high-fidelity simultaneous operations, a request could be raised to figure out a better way to balance the gate error from target qubit systems themselves and the error from nonparticipating spectator qubits.Overall, our analysis suggests that towards useful quantum processors, the qubit architecture should be examined carefully in the context of high-fidelity simultaneous gate operations in a scalable qubit lattice.
Accurate and efficient implementation of parallel quantum gates is crucial for scalable quantum information processing. However, the unavoidable crosstalk between qubits in current noisy processors impedes the achievement of high gate fidelities and renders full Hilbert-space control optimization prohibitively difficult. Here, we overcome this challenge by reducing the full-system optimization to crosstalk-robust control over constant-sized subsystems, which dramatically reduces the computational cost. Our method effectively eliminates the leading-order gate operation deviations induced by crosstalk, thereby suppressing error rates. Within this framework, we construct analytical pulse solutions for parallel single-qubit gates and numerical pulses for parallel multi-qubit operations. We validate the proposed approach numerically across multiple platforms, including coupled nitrogen-vacancy centers, a nuclear-spin processor, and superconducting-qubit arrays with up to 200 qubits. As a result, the noise scaling is reduced from exponential to linear for parallel single-qubit gates, and an order-of-magnitude reduction is achieved for parallel multi-qubit gates. Moreover, our method does not require precise knowledge of crosstalk strengths and makes no assumption about the underlying qubit connectivity or lattice geometry, thereby establishing a scalable framework for parallel quantum control in large-scale quantum architectures.
In superconducting qubit systems, microwave crosstalk among the qubit control lines is a prominent source of errors for gate operations, particularly when implemented simultaneously in a multiqubit system. In this work, we present an experimental study of crosstalk mitigation for the case of single-qubit gate operation, which involves the universal U3 gate decomposition into two Xπ/2 gates and three virtual Z gates. We demonstrate that by optimizing the virtual Z gate parameters, the crosstalk can be effectively mitigated, with the single-qubit gate fidelity recovered to the level comparable to that in the absence of crosstalk.
Improving the speed and fidelity of quantum logic gates is essential to reach quantum advantage with future quantum computers. However, fast logic gates lead to increased leakage errors in superconducting quantum processors based on qubits with low anharmonicity, such as transmons. To reduce leakage errors, we propose and experimentally demonstrate two new analytical methods, Fourier ansatz spectrum tuning derivative removal by adiabatic gate (FAST DRAG) and higher-derivative (HD) DRAG, both of which enable shaping single-qubit control pulses in the frequency domain to achieve stronger suppression of leakage transitions compared to previously demonstrated pulse shapes. Using the new methods to suppress the e f transition of a transmon qubit with an anharmonicity of − 212 MHz, we implement R X ( π / 2 ) gates achieving a leakage error below 3.0 × 10 − 5 down to a gate duration of 6.25 ns without the need for iterative closed-loop optimization. The obtained leakage error represents a 20-fold reduction in leakage compared to a conventional cosine DRAG pulse. Employing the FAST DRAG method, we further achieve an error per gate of ( 1.56 ± 0.07 ) × 10 − 4 at a 7.9-ns gate duration, outperforming conventional pulse shapes both in terms of error and gate speed. Furthermore, we study error-amplifying measurements for the characterization of temporal microwave control-pulse distortions, and demonstrate that non-Markovian coherent errors caused by such distortions may be a significant source of error for sub-10-ns single-qubit gates unless corrected using predistortion. Published by the American Physical Society 2024