Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2608.28463

Fabrication-free assessment of microwave losses in germanium-based dielectrics and superconductors

Haoran Lu, Kushagra Aggarwal, Xiangqin Wang, Pauline Drexler, Daniel Tong, Maciej W. Olszewski, Anand Ithepalli, Lingda Kong, Debdeep Jena, Peter L. McMahon, David A. Muller, Dominique Bougeard, Valla Fatemi

quant-phcond-mat.mes-hallSubmitted Aug 28, 2026• Announced Aug 31, 2026• Revised Sep 25, 2026 (v2)
v1 · Aug 28, 2026v2 · Sep 25, 2026
arXivHTMLPDF

Abstract

We present a flip-chip-based sensing scheme to measure effective microwave losses associated with target materials for quantum technologies, without requiring any device fabrication on the material under test. Using this approach, we quantify the microwave losses of a strain-engineered Ge/SiGe quantum well heterostructure and investigate losses arising from its Ge substrate and intermediate layers. The quality factors of the fabricated microwave resonators agree with the losses of dielectric materials independently extracted from flip-chip sensing measurements. We further study the superconductor platinum silicon germanide (PtSiGe) prepared by thermal reaction with a deposited Pt film, finding high microwave losses that limit the suitability of the films studied here as the sole superconductor for high-quality resonator applications. By coating Pt with Nb prior to the reaction, we observe a substantial reduction in microwave loss and a nearly three-fold enhancement of the transport critical temperature. The temperature dependence of the microwave loss is consistent with gap inhomogeneity in both superconducting films. These results identify constraints on material choices, provide design guidance for microwave circuits on planar Ge heterostructures, and demonstrate a fast-turnaround testing method for new materials for superconducting quantum circuits.

Related papers

High-quality and field resilient microwave resonators on Ge quantum well heterostructures

Luigi Ruggiero, Carlo Ciaccia, Pauline Drexler +5 more

Abstract Superconducting resonators integrated with germanium (Ge) quantum wells (QWs) offer a promising platform for hybrid quantum devices. Yet, in the most common heterostructure architectures, they have so far been limited by sizable photon losses. Here, we report the fabrication and characterization of microwave resonators patterned in the aluminum (Al) thin film of an in-situ grown superconductor/semiconductor hybrid heterostructure (HS). The semiconductor part of this hybrid HS is grown on a commercial Ge substrate. We consistently achieve internal quality factors Q i > 1000, surpassing previous results on Ge QW heterostructures grown using the concept of a virtual Ge substrate on silicon (Si) substrates. We reach Q i ≈ 49,000 at single-photon occupation and a plateau of Q i ≈ 20,000 at sub-one photon, an order of magnitude larger than any previously reported value of resonators on Ge QW structures at low power. We further characterize the thin Al film forming the resonator, extracting its kinetic inductance and superconducting gap, and studying its magnetic field dependence. Notably, the resonance remains well-defined up to in-plane magnetic fields of 850 mT. A hysteresis emerges in the out-of-plane magnetic field dependence, for both the resonance frequency and the quality factor, indicating an interesting interplay between vortex-and quasiparticle loss mechanisms.

arXiv:2512.20238•npj Quantum Information•Jun 11, 2026•3 citations

Low-loss frequency-tunable Josephson junction array cavities on Ge/SiGe heterostructures with a tapered etching approach

Franco De Palma, Elena Acinapura, Wonjin Jang +5 more

Ge/SiGe heterostructures represent a promising platform for hosting various quantum devices such as hole spin qubits and Andreev spin qubits. However, the compatibility of such heterostructures with high-quality-factor microwave superconducting cavities remains a challenge due to defects in the material stack. In this work, we present an approach to enhance the coherence of cavity modes on a reverse-graded Ge/SiGe heterostructure, which consists of etching the full $\sim 1.6~\mathrm{μm}$-thick Ge/SiGe stack down to its starting high-resistivity Si substrate, in order to pattern superconducting cavities directly on it. We engineer the mesa step to be tapered, so that it can be easily climbed by the superconducting cavities to reach the quantum devices potentially hosted in the Ge quantum well. Using this approach, we observe internal quality factors of $Q_\mathrm{i} \approx 10000-20000$ for high-impedance frequency-tunable Josephson junction array resonators, limited by the junctions' fabrication, and $Q_\mathrm{i} \approx 100000$ for $50~\mathrmΩ$ coplanar waveguide Nb lift-off resonators. These $Q_\mathrm{i}$ are preserved despite the overlap with the mesa structure in the climbing region, and are comparable to the ones obtained for identical resonators fabricated on a high-resistivity Si wafer reference. Thereby, this work paves a practical path toward superconductor-semiconductor hybrid devices, immediately applicable to emerging technologies on planar Ge.

quant-pharXiv:2512.17812•Dec 22, 2025•4 citations

Investigating microwave loss of SiGe using superconducting transmon qubits

Martin Sandberg, Vivekananda P. Adiga, Markus Brink +6 more

Silicon-germanium (SiGe) is a material that possesses a multitude of applications ranging from transistors to electro-optical modulators and quantum dots. The diverse properties of SiGe also make it attractive to implementations involving superconducting quantum computing. Here, we demonstrate the fabrication of transmon quantum bits on SiGe layers and investigate the microwave loss properties of SiGe at cryogenic temperatures and single photon microwave powers. We find relaxation times of up to 100 μs, corresponding to a quality factor Q above 4 M for large pad transmons. The high Q values obtained indicate that the SiGe/Si heterostructure is compatible with state-of-the-art performance of superconducting quantum circuits.

arXiv:2103.03747•Applied Physics Letters•Mar 22, 2021•12 citations

Making high-quality quantum microwave devices with van der Waals superconductors

Abhinandan Antony, M. Gustafsson, Anjaly Rajendran +5 more

Abstract Ultra low-loss microwave materials are crucial for enhancing quantum coherence and scalability of superconducting qubits. Van der Waals (vdW) heterostructure is an attractive platform for quantum devices due to the single-crystal structure of the constituent two-dimensional (2D) layered materials and the lack of dangling bonds at their atomically sharp interfaces. However, new fabrication and characterization techniques are required to determine whether these structures can achieve low loss in the microwave regime. Here we report the fabrication of superconducting microwave resonators using NbSe2 that achieve a quality factor Q > 105. This value sets an upper bound that corresponds to a resistance of ⩽ 192 μ Ω when considering the additional loss introduced by integrating NbSe2 into a standard transmon circuit. This work demonstrates the compatibility of 2D layered materials with high-quality microwave quantum devices.

arXiv:2107.09147•Journal of Physics Condensed Matter•Nov 30, 2021•10 citations

Characterization of Microwave Loss Using Multimode Superconducting Resonators

Chan U Lei, Suhas Ganjam, Lev Krayzman +5 more

Understanding the loss mechanisms in materials is crucial to improving coherence in superconducting quantum circuits. The authors present a technique based on multimode superconducting resonators that distinguishes and quantifies all loss channels in relevant materials. Applying this technique reveals that both chemical etching and diamond turning reduce surface losses in high-purity aluminum, while coating diamond-turned surfaces with thin-film aluminum significantly improves joint quality. This method can be used to design on-chip superconducting devices to characterize microwave losses, as well as to quantify the effects of fabrication processes.

arXiv:2305.01872•Physical Review Applied•Aug 18, 2023•18 citations

Materials loss measurements using superconducting microwave resonators

C. R. H. McRae, H. Wang, J. Gao +5 more

The performance of superconducting circuits for quantum computing is limited by materials losses. In particular, coherence times are typically bounded by two-level system (TLS) losses at single photon powers and millikelvin temperatures. The identification of low loss fabrication techniques, materials, and thin film dielectrics is critical to achieving scalable architectures for superconducting quantum computing. Superconducting microwave resonators provide a convenient qubit proxy for assessing performance and studying TLS loss and other mechanisms relevant to superconducting circuits such as non-equilibrium quasiparticles and magnetic flux vortices. In this review article, we provide an overview of considerations for designing accurate resonator experiments to characterize loss, including applicable types of losses, cryogenic setup, device design, and methods for extracting material and interface losses, summarizing techniques that have been evolving for over two decades. Results from measurements of a wide variety of materials and processes are also summarized. Finally, we present recommendations for the reporting of loss data from superconducting microwave resonators to facilitate materials comparisons across the field.

arXiv:2006.04718•Review of Scientific Instruments•Sep 1, 2020•293 citations
We present a flip-chip-based sensing scheme to measure effective microwave losses associated with target materials for quantum technologies, without requiring any device fabrication on the material under test. Using this approach, we quantify the microwave losses of a strain-engineered Ge/SiGe quantum well heterostructure and investigate losses arising from its Ge substrate and intermediate layers. The quality factors of the fabricated microwave resonators agree with the losses of dielectric materials independently extracted from flip-chip sensing measurements. We further study the superconductor platinum silicon germanide (PtSiGe) prepared by thermal reaction with a deposited Pt film, finding high microwave losses that limit the suitability of the films studied here as the sole superconductor for high-quality resonator applications. By coating Pt with Nb prior to the reaction, we observe a substantial reduction in microwave loss and a nearly three-fold enhancement of the transport critical temperature. The temperature dependence of the microwave loss is consistent with gap inhomogeneity in both superconducting films. These results identify constraints on material choices, provide design guidance for microwave circuits on planar Ge heterostructures, and demonstrate a fast-turnaround testing method for new materials for superconducting quantum circuits.
Abstract Superconducting resonators integrated with germanium (Ge) quantum wells (QWs) offer a promising platform for hybrid quantum devices. Yet, in the most common heterostructure architectures, they have so far been limited by sizable photon losses. Here, we report the fabrication and characterization of microwave resonators patterned in the aluminum (Al) thin film of an in-situ grown superconductor/semiconductor hybrid heterostructure (HS). The semiconductor part of this hybrid HS is grown on a commercial Ge substrate. We consistently achieve internal quality factors Q i > 1000, surpassing previous results on Ge QW heterostructures grown using the concept of a virtual Ge substrate on silicon (Si) substrates. We reach Q i ≈ 49,000 at single-photon occupation and a plateau of Q i ≈ 20,000 at sub-one photon, an order of magnitude larger than any previously reported value of resonators on Ge QW structures at low power. We further characterize the thin Al film forming the resonator, extracting its kinetic inductance and superconducting gap, and studying its magnetic field dependence. Notably, the resonance remains well-defined up to in-plane magnetic fields of 850 mT. A hysteresis emerges in the out-of-plane magnetic field dependence, for both the resonance frequency and the quality factor, indicating an interesting interplay between vortex-and quasiparticle loss mechanisms.
Ge/SiGe heterostructures represent a promising platform for hosting various quantum devices such as hole spin qubits and Andreev spin qubits. However, the compatibility of such heterostructures with high-quality-factor microwave superconducting cavities remains a challenge due to defects in the material stack. In this work, we present an approach to enhance the coherence of cavity modes on a reverse-graded Ge/SiGe heterostructure, which consists of etching the full ∼1.6 μm\sim 1.6~\mathrm{μm}∼1.6 μm-thick Ge/SiGe stack down to its starting high-resistivity Si substrate, in order to pattern superconducting cavities directly on it. We engineer the mesa step to be tapered, so that it can be easily climbed by the superconducting cavities to reach the quantum devices potentially hosted in the Ge quantum well. Using this approach, we observe internal quality factors of Qi≈10000−20000Q_\mathrm{i} \approx 10000-20000Qi​≈10000−20000 for high-impedance frequency-tunable Josephson junction array resonators, limited by the junctions' fabrication, and Qi≈100000Q_\mathrm{i} \approx 100000Qi​≈100000 for 50 Ω50~\mathrmΩ50 Ω coplanar waveguide Nb lift-off resonators. These QiQ_\mathrm{i}Qi​ are preserved despite the overlap with the mesa structure in the climbing region, and are comparable to the ones obtained for identical resonators fabricated on a high-resistivity Si wafer reference. Thereby, this work paves a practical path toward superconductor-semiconductor hybrid devices, immediately applicable to emerging technologies on planar Ge.
Silicon-germanium (SiGe) is a material that possesses a multitude of applications ranging from transistors to electro-optical modulators and quantum dots. The diverse properties of SiGe also make it attractive to implementations involving superconducting quantum computing. Here, we demonstrate the fabrication of transmon quantum bits on SiGe layers and investigate the microwave loss properties of SiGe at cryogenic temperatures and single photon microwave powers. We find relaxation times of up to 100 μs, corresponding to a quality factor Q above 4 M for large pad transmons. The high Q values obtained indicate that the SiGe/Si heterostructure is compatible with state-of-the-art performance of superconducting quantum circuits.
Abstract Ultra low-loss microwave materials are crucial for enhancing quantum coherence and scalability of superconducting qubits. Van der Waals (vdW) heterostructure is an attractive platform for quantum devices due to the single-crystal structure of the constituent two-dimensional (2D) layered materials and the lack of dangling bonds at their atomically sharp interfaces. However, new fabrication and characterization techniques are required to determine whether these structures can achieve low loss in the microwave regime. Here we report the fabrication of superconducting microwave resonators using NbSe2 that achieve a quality factor Q > 105. This value sets an upper bound that corresponds to a resistance of ⩽ 192 μ Ω when considering the additional loss introduced by integrating NbSe2 into a standard transmon circuit. This work demonstrates the compatibility of 2D layered materials with high-quality microwave quantum devices.
Understanding the loss mechanisms in materials is crucial to improving coherence in superconducting quantum circuits. The authors present a technique based on multimode superconducting resonators that distinguishes and quantifies all loss channels in relevant materials. Applying this technique reveals that both chemical etching and diamond turning reduce surface losses in high-purity aluminum, while coating diamond-turned surfaces with thin-film aluminum significantly improves joint quality. This method can be used to design on-chip superconducting devices to characterize microwave losses, as well as to quantify the effects of fabrication processes.
The performance of superconducting circuits for quantum computing is limited by materials losses. In particular, coherence times are typically bounded by two-level system (TLS) losses at single photon powers and millikelvin temperatures. The identification of low loss fabrication techniques, materials, and thin film dielectrics is critical to achieving scalable architectures for superconducting quantum computing. Superconducting microwave resonators provide a convenient qubit proxy for assessing performance and studying TLS loss and other mechanisms relevant to superconducting circuits such as non-equilibrium quasiparticles and magnetic flux vortices. In this review article, we provide an overview of considerations for designing accurate resonator experiments to characterize loss, including applicable types of losses, cryogenic setup, device design, and methods for extracting material and interface losses, summarizing techniques that have been evolving for over two decades. Results from measurements of a wide variety of materials and processes are also summarized. Finally, we present recommendations for the reporting of loss data from superconducting microwave resonators to facilitate materials comparisons across the field.