Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2103.03747 · Applied Physics Letters

Investigating microwave loss of SiGe using superconducting transmon qubits

Martin Sandberg, Vivekananda P. Adiga, Markus Brink, Cihan Kurter, Conal Murray, Marinus Hopstaken, John Bruley, Jason S. Orcutt, Hanhee Paik

Published Mar 22, 2021• 12 citations
arXivHTMLPDF

Abstract

Silicon-germanium (SiGe) is a material that possesses a multitude of applications ranging from transistors to electro-optical modulators and quantum dots. The diverse properties of SiGe also make it attractive to implementations involving superconducting quantum computing. Here, we demonstrate the fabrication of transmon quantum bits on SiGe layers and investigate the microwave loss properties of SiGe at cryogenic temperatures and single photon microwave powers. We find relaxation times of up to 100 μs, corresponding to a quality factor Q above 4 M for large pad transmons. The high Q values obtained indicate that the SiGe/Si heterostructure is compatible with state-of-the-art performance of superconducting quantum circuits.

DOI
10.1063/5.0038087

Related papers

Making high-quality quantum microwave devices with van der Waals superconductors

Abhinandan Antony, M. Gustafsson, Anjaly Rajendran +5 more

Abstract Ultra low-loss microwave materials are crucial for enhancing quantum coherence and scalability of superconducting qubits. Van der Waals (vdW) heterostructure is an attractive platform for quantum devices due to the single-crystal structure of the constituent two-dimensional (2D) layered materials and the lack of dangling bonds at their atomically sharp interfaces. However, new fabrication and characterization techniques are required to determine whether these structures can achieve low loss in the microwave regime. Here we report the fabrication of superconducting microwave resonators using NbSe2 that achieve a quality factor Q > 105. This value sets an upper bound that corresponds to a resistance of ⩽ 192 μ Ω when considering the additional loss introduced by integrating NbSe2 into a standard transmon circuit. This work demonstrates the compatibility of 2D layered materials with high-quality microwave quantum devices.

arXiv:2107.09147•Journal of Physics Condensed Matter•Nov 30, 2021•10 citations

Fabrication-free assessment of microwave losses in germanium-based dielectrics and superconductors

Haoran Lu, Kushagra Aggarwal, Xiangqin Wang +10 more

We present a flip-chip-based sensing scheme to measure effective microwave losses associated with target materials for quantum technologies, without requiring any device fabrication on the material under test. Using this approach, we quantify the microwave losses of a strain-engineered Ge/SiGe quantum well heterostructure and investigate losses arising from its Ge substrate and intermediate layers. The quality factors of the fabricated microwave resonators agree with the losses of dielectric materials independently extracted from flip-chip sensing measurements. We further study the superconductor platinum silicon germanide (PtSiGe) prepared by thermal reaction with a deposited Pt film, finding high microwave losses that limit the suitability of the films studied here as the sole superconductor for high-quality resonator applications. By coating Pt with Nb prior to the reaction, we observe a substantial reduction in microwave loss and a nearly three-fold enhancement of the transport critical temperature. The temperature dependence of the microwave loss is consistent with gap inhomogeneity in both superconducting films. These results identify constraints on material choices, provide design guidance for microwave circuits on planar Ge heterostructures, and demonstrate a fast-turnaround testing method for new materials for superconducting quantum circuits.

quant-pharXiv:2608.28463•Aug 31, 2026

Gatemon Qubit on a Germanium Quantum-Well Heterostructure

Elyjah Kiyooka, Chotivut Tangchingchai, Leo Noirot +9 more

Gatemons are superconducting qubits resembling transmons, with a gate-tunable semiconducting weak link as the Josephson element. Here, we report a gatemon device featuring an aluminum microwave circuit on a Ge/SiGe heterostructure embedding a Ge quantum well. Owing to the superconducting proximity effect, the high-mobility two-dimensional hole gas confined in this well provides a gate-tunable superconducting weak link between two Al contacts. We perform Rabi oscillation and Ramsey interference measurements, demonstrate the gate-voltage dependence of the qubit frequency, and measure the qubit anharmonicity. We find relaxation times T 1 up to 119 ns, and Ramsey coherence times T 2 * up to 70 ns, and a qubit frequency gate-tunable over 3.5 GHz. The reported proof-of-concept reproduces the results of a very recent work [Sagi et al. Nat. Commun. 2024, 15, 6400] using similar Ge/SiGe heterostructures, thereby validating a novel platform for the development of gatemons and parity-protected cos(2ϕ) qubits.

arXiv:2411.02367•Nano Letters•Dec 17, 2024•23 citations

Integration of Topological Insulator Josephson Junctions in Superconducting Qubit Circuits

Tobias Schmitt, M. R. Connolly, Michael Schleenvoigt +16 more

The integration of semiconductor Josephson junctions (JJs) in superconducting quantum circuits provides a versatile platform for hybrid qubits and offers a powerful way to probe exotic quasiparticle excitations. Recent proposals for using circuit quantum electrodynamics (cQED) to detect topological superconductivity motivate the integration of novel topological materials in such circuits. Here, we report on the realization of superconducting transmon qubits implemented with (Bi 0.06 Sb 0.94 ) 2 Te 3 topological insulator (TI) JJs using ultrahigh vacuum fabrication techniques. Microwave losses on our substrates, which host monolithically integrated hardmasks used for the selective area growth of TI nanostructures, imply microsecond limits to relaxation times and, thus, their compatibility with strong-coupling cQED. We use the cavity–qubit interaction to show that the Josephson energy of TI-based transmons scales with their JJ dimensions and demonstrate qubit control as well as temporal quantum coherence. Our results pave the way for advanced investigations of topological materials in both novel Josephson and topological qubits.

arXiv:2007.04224•Nano Letters•Mar 2, 2022•48 citations

Compact vacuum-gap transmon qubits: Selective and sensitive probes for superconductor surface losses

Martin Žemlička, Elena S. Redchenko, Matilda Peruzzo +4 more

State-of-the-art transmon qubits rely on large capacitors, which systematically improve their coherence due to reduced surface-loss participation. However, this approach increases both the footprint and the parasitic cross-coupling and is ultimately limited by radiation losses---a potential roadblock for scaling up quantum processors to millions of qubits. In this work we present transmon qubits with sizes as low as $36\phantom{\rule{0.2em}{0ex}}\ifmmode\times\else\texttimes\fi{}\phantom{\rule{0.2em}{0ex}}39\phantom{\rule{0.2em}{0ex}}\text{\ensuremath{\mu}}{\mathrm{m}}^{2}$ with $\ensuremath{\gtrsim}100$-nm-wide vacuum-gap capacitors that are micromachined from commercial silicon-on-insulator wafers and shadow evaporated with aluminum. We achieve a vacuum participation ratio up to 99.6% in an in-plane design that is compatible with standard coplanar circuits. Qubit relaxation-time measurements for small gaps with high zero-point electric field variance of up to 22 V/m reveal a double exponential decay indicating comparably strong qubit interaction with long-lived two-level systems. The exceptionally high selectivity of up to 20 dB to the superconductor-vacuum interface allows us to precisely back out the sub-single-photon dielectric loss tangent of aluminum oxide previously exposed to ambient conditions. In terms of future scaling potential, we achieve a ratio of qubit quality factor to a footprint area equal to $20\phantom{\rule{0.2em}{0ex}}\text{\ensuremath{\mu}}{\mathrm{m}}^{\ensuremath{-}2}$, which is comparable with the highest ${T}_{1}$ devices relying on larger geometries, a value that could improve substantially for lower surface-loss superconductors.

arXiv:2206.14104•Physical Review Applied•Oct 20, 2023•15 citations

Superconducting Qubits above 20 GHz Operating over 200 mK

Alexander Anferov, Shannon P. Harvey, Fanghui Wan +2 more

Current state-of-the-art superconducting microwave qubits are cooled to extremely low temperatures to avoid sources of decoherence. Higher qubit operating temperatures would significantly increase the cooling power available, which is desirable for scaling up the number of qubits in quantum computing architectures and integrating qubits in experiments requiring increased heat dissipation. To operate superconducting qubits at higher temperatures, it is necessary to address both quasiparticle decoherence (which becomes significant for aluminum junctions above 160 mK) and dephasing from thermal microwave photons (which are problematic above 50 mK). Using low-loss niobium-trilayer junctions, which have reduced sensitivity to quasiparticles due to the higher superconducting transition temperature of niobium, we fabricate transmons with higher frequencies than previously studied, up to 24 GHz. We measure decoherence and dephasing times of about 1 μ s , corresponding to average qubit quality factors of approximately 10 5 , and find that decoherence is unaffected by quasiparticles up to 1 K . Without relaxation from quasiparticles, we are able to explore dephasing from purely thermal sources, finding that our qubits can operate up to approximately 250 mK while maintaining similar performance. The thermal resilience of these qubits creates new options for scaling up quantum processors, enables hybrid quantum experiments with high heat-dissipation budgets, and introduces a material platform for even-higher-frequency qubits. Published by the American Physical Society 2024

arXiv:2402.03031•PRX Quantum•Sep 9, 2024•65 citations
Silicon-germanium (SiGe) is a material that possesses a multitude of applications ranging from transistors to electro-optical modulators and quantum dots. The diverse properties of SiGe also make it attractive to implementations involving superconducting quantum computing. Here, we demonstrate the fabrication of transmon quantum bits on SiGe layers and investigate the microwave loss properties of SiGe at cryogenic temperatures and single photon microwave powers. We find relaxation times of up to 100 μs, corresponding to a quality factor Q above 4 M for large pad transmons. The high Q values obtained indicate that the SiGe/Si heterostructure is compatible with state-of-the-art performance of superconducting quantum circuits.
Abstract Ultra low-loss microwave materials are crucial for enhancing quantum coherence and scalability of superconducting qubits. Van der Waals (vdW) heterostructure is an attractive platform for quantum devices due to the single-crystal structure of the constituent two-dimensional (2D) layered materials and the lack of dangling bonds at their atomically sharp interfaces. However, new fabrication and characterization techniques are required to determine whether these structures can achieve low loss in the microwave regime. Here we report the fabrication of superconducting microwave resonators using NbSe2 that achieve a quality factor Q > 105. This value sets an upper bound that corresponds to a resistance of ⩽ 192 μ Ω when considering the additional loss introduced by integrating NbSe2 into a standard transmon circuit. This work demonstrates the compatibility of 2D layered materials with high-quality microwave quantum devices.
We present a flip-chip-based sensing scheme to measure effective microwave losses associated with target materials for quantum technologies, without requiring any device fabrication on the material under test. Using this approach, we quantify the microwave losses of a strain-engineered Ge/SiGe quantum well heterostructure and investigate losses arising from its Ge substrate and intermediate layers. The quality factors of the fabricated microwave resonators agree with the losses of dielectric materials independently extracted from flip-chip sensing measurements. We further study the superconductor platinum silicon germanide (PtSiGe) prepared by thermal reaction with a deposited Pt film, finding high microwave losses that limit the suitability of the films studied here as the sole superconductor for high-quality resonator applications. By coating Pt with Nb prior to the reaction, we observe a substantial reduction in microwave loss and a nearly three-fold enhancement of the transport critical temperature. The temperature dependence of the microwave loss is consistent with gap inhomogeneity in both superconducting films. These results identify constraints on material choices, provide design guidance for microwave circuits on planar Ge heterostructures, and demonstrate a fast-turnaround testing method for new materials for superconducting quantum circuits.
Gatemons are superconducting qubits resembling transmons, with a gate-tunable semiconducting weak link as the Josephson element. Here, we report a gatemon device featuring an aluminum microwave circuit on a Ge/SiGe heterostructure embedding a Ge quantum well. Owing to the superconducting proximity effect, the high-mobility two-dimensional hole gas confined in this well provides a gate-tunable superconducting weak link between two Al contacts. We perform Rabi oscillation and Ramsey interference measurements, demonstrate the gate-voltage dependence of the qubit frequency, and measure the qubit anharmonicity. We find relaxation times T 1 up to 119 ns, and Ramsey coherence times T 2 * up to 70 ns, and a qubit frequency gate-tunable over 3.5 GHz. The reported proof-of-concept reproduces the results of a very recent work [Sagi et al. Nat. Commun. 2024, 15, 6400] using similar Ge/SiGe heterostructures, thereby validating a novel platform for the development of gatemons and parity-protected cos(2ϕ) qubits.
The integration of semiconductor Josephson junctions (JJs) in superconducting quantum circuits provides a versatile platform for hybrid qubits and offers a powerful way to probe exotic quasiparticle excitations. Recent proposals for using circuit quantum electrodynamics (cQED) to detect topological superconductivity motivate the integration of novel topological materials in such circuits. Here, we report on the realization of superconducting transmon qubits implemented with (Bi 0.06 Sb 0.94 ) 2 Te 3 topological insulator (TI) JJs using ultrahigh vacuum fabrication techniques. Microwave losses on our substrates, which host monolithically integrated hardmasks used for the selective area growth of TI nanostructures, imply microsecond limits to relaxation times and, thus, their compatibility with strong-coupling cQED. We use the cavity–qubit interaction to show that the Josephson energy of TI-based transmons scales with their JJ dimensions and demonstrate qubit control as well as temporal quantum coherence. Our results pave the way for advanced investigations of topological materials in both novel Josephson and topological qubits.
State-of-the-art transmon qubits rely on large capacitors, which systematically improve their coherence due to reduced surface-loss participation. However, this approach increases both the footprint and the parasitic cross-coupling and is ultimately limited by radiation losses---a potential roadblock for scaling up quantum processors to millions of qubits. In this work we present transmon qubits with sizes as low as $36\phantom{\rule{0.2em}{0ex}}\ifmmode\times\else\texttimes\fi{}\phantom{\rule{0.2em}{0ex}}39\phantom{\rule{0.2em}{0ex}}\text{\ensuremath{\mu}}{\mathrm{m}}^{2}$ with $\ensuremath{\gtrsim}100$-nm-wide vacuum-gap capacitors that are micromachined from commercial silicon-on-insulator wafers and shadow evaporated with aluminum. We achieve a vacuum participation ratio up to 99.6% in an in-plane design that is compatible with standard coplanar circuits. Qubit relaxation-time measurements for small gaps with high zero-point electric field variance of up to 22 V/m reveal a double exponential decay indicating comparably strong qubit interaction with long-lived two-level systems. The exceptionally high selectivity of up to 20 dB to the superconductor-vacuum interface allows us to precisely back out the sub-single-photon dielectric loss tangent of aluminum oxide previously exposed to ambient conditions. In terms of future scaling potential, we achieve a ratio of qubit quality factor to a footprint area equal to $20\phantom{\rule{0.2em}{0ex}}\text{\ensuremath{\mu}}{\mathrm{m}}^{\ensuremath{-}2}$, which is comparable with the highest T1{T}_{1}T1​ devices relying on larger geometries, a value that could improve substantially for lower surface-loss superconductors.
Current state-of-the-art superconducting microwave qubits are cooled to extremely low temperatures to avoid sources of decoherence. Higher qubit operating temperatures would significantly increase the cooling power available, which is desirable for scaling up the number of qubits in quantum computing architectures and integrating qubits in experiments requiring increased heat dissipation. To operate superconducting qubits at higher temperatures, it is necessary to address both quasiparticle decoherence (which becomes significant for aluminum junctions above 160 mK) and dephasing from thermal microwave photons (which are problematic above 50 mK). Using low-loss niobium-trilayer junctions, which have reduced sensitivity to quasiparticles due to the higher superconducting transition temperature of niobium, we fabricate transmons with higher frequencies than previously studied, up to 24 GHz. We measure decoherence and dephasing times of about 1 μ s , corresponding to average qubit quality factors of approximately 10 5 , and find that decoherence is unaffected by quasiparticles up to 1 K . Without relaxation from quasiparticles, we are able to explore dephasing from purely thermal sources, finding that our qubits can operate up to approximately 250 mK while maintaining similar performance. The thermal resilience of these qubits creates new options for scaling up quantum processors, enables hybrid quantum experiments with high heat-dissipation budgets, and introduces a material platform for even-higher-frequency qubits. Published by the American Physical Society 2024