Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2608.06859

Spin Qubits in Photon-Coupled Microwave Cavities

Samuel Johnson, Nancy Sandler

cond-mat.mes-hallquant-phSubmitted Aug 7, 2026• Announced Aug 10, 2026• 0 citations
arXivHTMLPDF

Abstract

Electron spin qubits in microwave cavities provide a promising platform for scalable quantum computing hardware, leveraging long coherence times, charge-noise robustness and cavity mediated qubit-qubit interactions. While the strong spin-photon coupling regime is accessible via on-chip micromagnets, scaling conventional architectures by placing multiple qubits within a single shared resonator degrades transmission amplitudes, hence limiting large-scale efficiency. To overcome this limitation, we analyze a modular architecture where individual cavities containing a limited number of qubits are coupled via single-photon-exchange waveguides. Using input/output theory, we compute the transmission amplitudes for networks of two and three coupled cavities in various configurations. We map out the distinct physical regimes accessible by tuning key system parameters, offering a viable pathway for scalable cavity-based quantum spin qubit networks.

Comments
12 figures

Related papers

Cavity-Mediated Entanglement of Parametrically Driven Spin Qubits via Sidebands

Vanita Srinivasa, Jacob M. Taylor, J. R. Petta

We consider a pair of quantum dot-based spin qubits that interact via microwave photons in a superconducting cavity and that are also parametrically driven by separate external electric fields. For this system, we formulate a model for spin qubit entanglement in the presence of mutually off-resonant qubit and cavity frequencies. We show that the sidebands generated via the driving fields enable highly tunable qubit-qubit entanglement using only ac control and without requiring the qubit and cavity frequencies to be tuned into simultaneous resonance. The model we derive can be mapped to a variety of qubit types, including detuning-driven one-electron spin qubits in double quantum dots and three-electron resonant exchange qubits in triple quantum dots. The high degree of nonlinearity inherent in spin qubits renders these systems particularly favorable for parametric drive-activated entanglement. We determine multiple common resonance conditions for the two driven qubits and the cavity and identify experimentally relevant parameter regimes that enable the implementation of entangling gates with suppressed sensitivity to cavity photon occupation and decay. The parametrically driven sideband resonance approach that we describe provides a promising route toward scalability and modularity in spin-based quantum information processing through drive-enabled tunability that can also be implemented in micromagnet-free electron and hole systems for spin-photon coupling. Published by the American Physical Society 2024

arXiv:2307.06067•PRX Quantum•May 21, 2024•20 citations

Singlet-Triplet and Exchange-Only Flopping-Mode Spin Qubits

Simon Stastny, Guido Burkard

Semiconductor-based spin qubits embedded into a superconducting microwave cavity constitute a fast-progressing and promising platform for realizing fast and fault-tolerant qubit control with long-range two-qubit coupling. The flopping-mode spin qubit consists of a single electron in a double quantum dot; it combines a charge qubit with a spin qubit. With its strong and tunable cavity coupling, the flopping-mode qubit is proven to be well suited for low-power qubit control and cavity-mediated long-range quantum gates. The singlet-triplet (ST) and exchange-only (EO) qubits are multielectron realizations that go without broadband control and are protected from some types of noise, but are challenging to couple to each other and to microwave cavities. We combine the flopping-mode concept with the ST and EO qubits and propose two new flopping-mode qubits that consist of three (four) quantum dots, occupied by two (three) electrons near the ( 1 , 0 , 1 ) ↔ ( 0 , 1 , 1 ) [ ( 1 , 0 , 1 , 1 ) ↔ ( 0 , 1 , 1 , 1 ) ] charge transition. The two-electron system augments the ST 0 spin qubit with a charge qubit that interacts transversally and longitudinally with a cavity. Both couplings are highly tunable, and the longitudinal coupling distinguishes the flopping-mode ST qubit from the regular flopping-mode qubit. The longitudinal coupling allows for nondissipative universal control similar to superconducting transmon qubits. The EO flopping-mode qubit comprises four dots occupied by three electrons and opens a new possibility to perform two-qubit gates for EO qubits that are challenging to perform directly with the exchange coupling. We use input-output theory to provide means of extracting the coupling strengths from cavity transmission data.

arXiv:2503.05032•PRX Quantum•Aug 18, 2025•5 citations

Simultaneous high-fidelity readout and strong coupling in a donor-based spin qubit

Si Yan Koh, Weifan Wu, Kelvin Onggadinata +7 more

Superconducting resonators coupled to solid-state qubits offer a scalable architecture for long-range entangling operations and fast, high-fidelity readout. Realizing this requires low photon-loss rates and qubits with tunable electric dipole moments that couple strongly to the resonator's electric field while maintaining long coherence times. For spin qubits, spin-photon coupling is typically achieved via spin-charge hybridization. However, this introduces a fundamental trade-off: a large spin-charge admixture enhances the coupling strength, which boosts readout and resonator-mediated gate speeds, but exposes the qubit to increased decoherence, thereby increasing the threshold required for strong coupling and limiting the time available for accurate state measurement. This makes it essential to identify optimal operating points for each qubit platform. We address this for the donor-based flip-flop qubit, whose microwave-controllable electron-nuclear spin states make it suitable for coupling to microwave resonators. We demonstrate that, by choosing intermediate tunnel couplings that balance strong interaction with long qubit lifetimes, high-fidelity readout and strong coupling are simultaneously achievable. We also map out the respective charge-photon couplings and photon-loss rates required. Furthermore, we show that experimental constraints on charge-photon coupling and photon loss can be mitigated using squeezed input fields. As similar trade-offs appear in quantum-dot-based qubits, our methods and insights extend naturally to these platforms, offering a potential route toward scalable architectures.

arXiv:2602.12248•Physical review. B./Physical review. B•Apr 22, 2026•0 citations

Input-output theory for spin-photon coupling in Si double quantum dots

Mónica Benito, Xiao Mi, Jacob M. Taylor +2 more

The interaction of qubits via microwave frequency photons enables long-distance qubit-qubit coupling and facilitates the realization of a large-scale quantum processor. However, qubits based on electron spins in semiconductor quantum dots have proven challenging to couple to microwave photons. In this theoretical work we show that a sizable coupling for a single electron spin is possible via spin-charge hybridization using a magnetic field gradient in a silicon double quantum dot. Based on parameters already shown in recent experiments, we predict optimal working points to achieve a coherent spin-photon coupling, an essential ingredient for the generation of long-range entanglement. Furthermore, we employ input-output theory to identify observable signatures of spin-photon coupling in the cavity output field, which may provide guidance to the experimental search for strong coupling in such spin-photon systems and opens the way to cavity-based readout of the spin qubit.

arXiv:1710.02508•Physical review. B./Physical review. B•Dec 22, 2017•111 citations

Coherent Spin-Spin Coupling Mediated by Virtual Microwave Photons

Patrick Harvey-Collard, Jurgen Dijkema, Guoji Zheng +3 more

We report the coherent coupling of two electron spins at a distance via virtual microwave photons.Each spin is trapped in a silicon double quantum dot at either end of a superconducting resonator, achieving spinphoton couplings up to around g s =2π ¼ 40 MHz.As the two spins are brought into resonance with each other, but detuned from the photons, an avoided crossing larger than the spin linewidths is observed with an exchange splitting around 2J=2π ¼ 20 MHz.In addition, photon-number states are resolved from the shift 2χ s =2π ¼ -13 MHz that they induce on the spin frequency.These observations demonstrate that we reach the strong dispersive regime of circuit quantum electrodynamics with spins.Achieving spin-spin coupling without real photons is essential to long-range two-qubit gates between spin qubits and scalable networks of spin qubits on a chip.

arXiv:2108.01206•Physical Review X•May 2, 2022•115 citations

Circuit Quantum Electrodynamics with Single Electron Spins in Silicon

Guoji Zheng

This dissertation describes a set of experiments with the goal of creating a super-conductor-semiconductor hybrid circuit quantum electrodynamics architecture with single electron spins. Single spins in silicon quantum dots have emerged as attractive qubits for quantum computation. However, how to scale up spin qubit systems remains an open question. The hybrid architecture considered here could provide a route to realizing large networks of quantum dot–based spin qubit registers. The first experiment in this thesis is aimed at achieving strong coupling between a single electron spin and a single microwave photon. The electron is trapped in a gate-defined double quantum dot in a Si/SiGe heterostructure and the photon is stored in an on-chip superconducting high-impedance NbTiN cavity. The photon is coupled directly to the electron charge, and indirectly to the electron spin, mediated through a synthetic spin-orbit field. We observe a vacuum Rabi splitting that depends on the spin-charge hybridization. The ratio of spin-photon coupling strength to decoherence rates of the spin and cavity combined is larger than unity, confirming the strong coupling regime has been reached. In addition, we find an optimal degree of spin-charge hybridization for which this ratio is maximized. The demonstration of strong spin-photon coupling not only opens a new range of physics experiments, but fulfills also a crucial requirement for coupling spin qubits at a distance via a cavity. The second experiment is focused on spin readout with the on-chip cavity. Instead of the direct dispersive readout of a single spin, we use the cavity to detect whether the electron is allowed to tunnel between the two dots or not. We benchmark the charge sensitivity and bandwidth of the detector and find that rapid detection of the electron charge with high SNR is possible. In the two-electron regime, electron tunneling is contingent on the total spin state (Pauli spin blockade). This spin-to-charge conversion scheme enables single-shot detection of singlet states with high-fidelity. The demonstration of single-shot spin readout with a cavity is an essential step towards readout in dense spin qubit arrays, such as the crossbar network, where it is not possible to integrate electrometers and accompanying reservoirs adjacent to the qubit dots. In the third experiment, we develop on-chip microwave filters to suppress microwave photon leakage from the cavity through the gate electrodes that are necessary to form quantum dots. We introduce a new cavity design that is compatible with long-distance connectivity between spins, but is also more susceptible to microwave leakage. We test and compare two low-pass filter variations in terms of performance, footprint and integrability. They use the same nanowire inductor, but different implementations of the capacitor: one with a planar interdigitated capacitor and one novel design with an overlapping thin-film capacitor. We find that both approaches are effective against microwave leakage. However, the large footprint of the interdigitated capacitor makes this solution inconvenient as the number of gate lines increases. The thin-film capacitor, with its much smaller footprint, is better suited for our devices. The final part of this dissertation contains concluding remarks and possible future directions are proposed.

•Jan 27, 2021•1 citation
Electron spin qubits in microwave cavities provide a promising platform for scalable quantum computing hardware, leveraging long coherence times, charge-noise robustness and cavity mediated qubit-qubit interactions. While the strong spin-photon coupling regime is accessible via on-chip micromagnets, scaling conventional architectures by placing multiple qubits within a single shared resonator degrades transmission amplitudes, hence limiting large-scale efficiency. To overcome this limitation, we analyze a modular architecture where individual cavities containing a limited number of qubits are coupled via single-photon-exchange waveguides. Using input/output theory, we compute the transmission amplitudes for networks of two and three coupled cavities in various configurations. We map out the distinct physical regimes accessible by tuning key system parameters, offering a viable pathway for scalable cavity-based quantum spin qubit networks.
We consider a pair of quantum dot-based spin qubits that interact via microwave photons in a superconducting cavity and that are also parametrically driven by separate external electric fields. For this system, we formulate a model for spin qubit entanglement in the presence of mutually off-resonant qubit and cavity frequencies. We show that the sidebands generated via the driving fields enable highly tunable qubit-qubit entanglement using only ac control and without requiring the qubit and cavity frequencies to be tuned into simultaneous resonance. The model we derive can be mapped to a variety of qubit types, including detuning-driven one-electron spin qubits in double quantum dots and three-electron resonant exchange qubits in triple quantum dots. The high degree of nonlinearity inherent in spin qubits renders these systems particularly favorable for parametric drive-activated entanglement. We determine multiple common resonance conditions for the two driven qubits and the cavity and identify experimentally relevant parameter regimes that enable the implementation of entangling gates with suppressed sensitivity to cavity photon occupation and decay. The parametrically driven sideband resonance approach that we describe provides a promising route toward scalability and modularity in spin-based quantum information processing through drive-enabled tunability that can also be implemented in micromagnet-free electron and hole systems for spin-photon coupling. Published by the American Physical Society 2024
Semiconductor-based spin qubits embedded into a superconducting microwave cavity constitute a fast-progressing and promising platform for realizing fast and fault-tolerant qubit control with long-range two-qubit coupling. The flopping-mode spin qubit consists of a single electron in a double quantum dot; it combines a charge qubit with a spin qubit. With its strong and tunable cavity coupling, the flopping-mode qubit is proven to be well suited for low-power qubit control and cavity-mediated long-range quantum gates. The singlet-triplet (ST) and exchange-only (EO) qubits are multielectron realizations that go without broadband control and are protected from some types of noise, but are challenging to couple to each other and to microwave cavities. We combine the flopping-mode concept with the ST and EO qubits and propose two new flopping-mode qubits that consist of three (four) quantum dots, occupied by two (three) electrons near the ( 1 , 0 , 1 ) ↔ ( 0 , 1 , 1 ) [ ( 1 , 0 , 1 , 1 ) ↔ ( 0 , 1 , 1 , 1 ) ] charge transition. The two-electron system augments the ST 0 spin qubit with a charge qubit that interacts transversally and longitudinally with a cavity. Both couplings are highly tunable, and the longitudinal coupling distinguishes the flopping-mode ST qubit from the regular flopping-mode qubit. The longitudinal coupling allows for nondissipative universal control similar to superconducting transmon qubits. The EO flopping-mode qubit comprises four dots occupied by three electrons and opens a new possibility to perform two-qubit gates for EO qubits that are challenging to perform directly with the exchange coupling. We use input-output theory to provide means of extracting the coupling strengths from cavity transmission data.
Superconducting resonators coupled to solid-state qubits offer a scalable architecture for long-range entangling operations and fast, high-fidelity readout. Realizing this requires low photon-loss rates and qubits with tunable electric dipole moments that couple strongly to the resonator's electric field while maintaining long coherence times. For spin qubits, spin-photon coupling is typically achieved via spin-charge hybridization. However, this introduces a fundamental trade-off: a large spin-charge admixture enhances the coupling strength, which boosts readout and resonator-mediated gate speeds, but exposes the qubit to increased decoherence, thereby increasing the threshold required for strong coupling and limiting the time available for accurate state measurement. This makes it essential to identify optimal operating points for each qubit platform. We address this for the donor-based flip-flop qubit, whose microwave-controllable electron-nuclear spin states make it suitable for coupling to microwave resonators. We demonstrate that, by choosing intermediate tunnel couplings that balance strong interaction with long qubit lifetimes, high-fidelity readout and strong coupling are simultaneously achievable. We also map out the respective charge-photon couplings and photon-loss rates required. Furthermore, we show that experimental constraints on charge-photon coupling and photon loss can be mitigated using squeezed input fields. As similar trade-offs appear in quantum-dot-based qubits, our methods and insights extend naturally to these platforms, offering a potential route toward scalable architectures.
The interaction of qubits via microwave frequency photons enables long-distance qubit-qubit coupling and facilitates the realization of a large-scale quantum processor. However, qubits based on electron spins in semiconductor quantum dots have proven challenging to couple to microwave photons. In this theoretical work we show that a sizable coupling for a single electron spin is possible via spin-charge hybridization using a magnetic field gradient in a silicon double quantum dot. Based on parameters already shown in recent experiments, we predict optimal working points to achieve a coherent spin-photon coupling, an essential ingredient for the generation of long-range entanglement. Furthermore, we employ input-output theory to identify observable signatures of spin-photon coupling in the cavity output field, which may provide guidance to the experimental search for strong coupling in such spin-photon systems and opens the way to cavity-based readout of the spin qubit.
We report the coherent coupling of two electron spins at a distance via virtual microwave photons.Each spin is trapped in a silicon double quantum dot at either end of a superconducting resonator, achieving spinphoton couplings up to around g s =2π ¼ 40 MHz.As the two spins are brought into resonance with each other, but detuned from the photons, an avoided crossing larger than the spin linewidths is observed with an exchange splitting around 2J=2π ¼ 20 MHz.In addition, photon-number states are resolved from the shift 2χ s =2π ¼ -13 MHz that they induce on the spin frequency.These observations demonstrate that we reach the strong dispersive regime of circuit quantum electrodynamics with spins.Achieving spin-spin coupling without real photons is essential to long-range two-qubit gates between spin qubits and scalable networks of spin qubits on a chip.
This dissertation describes a set of experiments with the goal of creating a super-conductor-semiconductor hybrid circuit quantum electrodynamics architecture with single electron spins. Single spins in silicon quantum dots have emerged as attractive qubits for quantum computation. However, how to scale up spin qubit systems remains an open question. The hybrid architecture considered here could provide a route to realizing large networks of quantum dot–based spin qubit registers. The first experiment in this thesis is aimed at achieving strong coupling between a single electron spin and a single microwave photon. The electron is trapped in a gate-defined double quantum dot in a Si/SiGe heterostructure and the photon is stored in an on-chip superconducting high-impedance NbTiN cavity. The photon is coupled directly to the electron charge, and indirectly to the electron spin, mediated through a synthetic spin-orbit field. We observe a vacuum Rabi splitting that depends on the spin-charge hybridization. The ratio of spin-photon coupling strength to decoherence rates of the spin and cavity combined is larger than unity, confirming the strong coupling regime has been reached. In addition, we find an optimal degree of spin-charge hybridization for which this ratio is maximized. The demonstration of strong spin-photon coupling not only opens a new range of physics experiments, but fulfills also a crucial requirement for coupling spin qubits at a distance via a cavity. The second experiment is focused on spin readout with the on-chip cavity. Instead of the direct dispersive readout of a single spin, we use the cavity to detect whether the electron is allowed to tunnel between the two dots or not. We benchmark the charge sensitivity and bandwidth of the detector and find that rapid detection of the electron charge with high SNR is possible. In the two-electron regime, electron tunneling is contingent on the total spin state (Pauli spin blockade). This spin-to-charge conversion scheme enables single-shot detection of singlet states with high-fidelity. The demonstration of single-shot spin readout with a cavity is an essential step towards readout in dense spin qubit arrays, such as the crossbar network, where it is not possible to integrate electrometers and accompanying reservoirs adjacent to the qubit dots. In the third experiment, we develop on-chip microwave filters to suppress microwave photon leakage from the cavity through the gate electrodes that are necessary to form quantum dots. We introduce a new cavity design that is compatible with long-distance connectivity between spins, but is also more susceptible to microwave leakage. We test and compare two low-pass filter variations in terms of performance, footprint and integrability. They use the same nanowire inductor, but different implementations of the capacitor: one with a planar interdigitated capacitor and one novel design with an overlapping thin-film capacitor. We find that both approaches are effective against microwave leakage. However, the large footprint of the interdigitated capacitor makes this solution inconvenient as the number of gate lines increases. The thin-film capacitor, with its much smaller footprint, is better suited for our devices. The final part of this dissertation contains concluding remarks and possible future directions are proposed.