Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2503.05032 · PRX Quantum

Singlet-Triplet and Exchange-Only Flopping-Mode Spin Qubits

Simon Stastny, Guido Burkard

Published Aug 18, 2025• 5 citations
arXivHTMLPDF

Abstract

Semiconductor-based spin qubits embedded into a superconducting microwave cavity constitute a fast-progressing and promising platform for realizing fast and fault-tolerant qubit control with long-range two-qubit coupling. The flopping-mode spin qubit consists of a single electron in a double quantum dot; it combines a charge qubit with a spin qubit. With its strong and tunable cavity coupling, the flopping-mode qubit is proven to be well suited for low-power qubit control and cavity-mediated long-range quantum gates. The singlet-triplet (ST) and exchange-only (EO) qubits are multielectron realizations that go without broadband control and are protected from some types of noise, but are challenging to couple to each other and to microwave cavities. We combine the flopping-mode concept with the ST and EO qubits and propose two new flopping-mode qubits that consist of three (four) quantum dots, occupied by two (three) electrons near the ( 1 , 0 , 1 ) ↔ ( 0 , 1 , 1 ) [ ( 1 , 0 , 1 , 1 ) ↔ ( 0 , 1 , 1 , 1 ) ] charge transition. The two-electron system augments the ST 0 spin qubit with a charge qubit that interacts transversally and longitudinally with a cavity. Both couplings are highly tunable, and the longitudinal coupling distinguishes the flopping-mode ST qubit from the regular flopping-mode qubit. The longitudinal coupling allows for nondissipative universal control similar to superconducting transmon qubits. The EO flopping-mode qubit comprises four dots occupied by three electrons and opens a new possibility to perform two-qubit gates for EO qubits that are challenging to perform directly with the exchange coupling. We use input-output theory to provide means of extracting the coupling strengths from cavity transmission data.

DOI
10.1103/v1b6-r6jm

Related papers

High-fidelity two-qubit gates of hybrid superconducting-semiconducting singlet-triplet qubits

Maria Spethmann, Stefano Bosco, Andrea Hofmann +2 more

Hybrid systems comprising superconducting and semiconducting materials are promising architectures for quantum computing. Superconductors induce long-range interactions between the spin degrees of freedom of semiconducting quantum dots. These interactions are widely anisotropic when the semiconductor material has strong spin-orbit interactions. We show that this anisotropy is tunable and enables fast and high-fidelity two-qubit gates between singlet-triplet (ST) spin qubits. Our design is immune to leakage of the quantum information into noncomputational states and removes always-on interactions between the qubits, thus resolving key open challenges for these architectures. Our ST qubits do not require additional technologically demanding components nor fine-tuning of parameters. They operate at low magnetic fields of a few millitesla and are fully compatible with superconductors. By suppressing systematic errors in realistic devices, we estimate infidelities below ${10}^{\ensuremath{-}3}$, which could pave the way toward large-scale hybrid superconducting-semiconducting quantum processors.

arXiv:2304.05086•Physical review. B./Physical review. B•Feb 7, 2024•28 citations

Achieving quantum computation with quantum dot spin qubits

Sebastian Mehl, David Peter Divincenzo

A two-level quantum system is the building block of a quantum computer. This pair of quantum states defines the computational unit of a quantum computer, and it is called a quantum bit or qubit in analogy to the bit that is the binary unit of a classical computer. The spin of a single electron naturally defines such a two-level quantum system. A quantum dot can be tuned to the single-electron regime, and an array of singly occupied quantum dots provides a multi-qubit register. This thesis describes the multielectron encoding of a spin qubit using a pair or a trio of quantum dots, and it analyzes the coherence properties and manipulation protocols of this system. The singlet-triplet qubit, coded using the singlet state and the spinless triplet state of a pair of singly occupied quantum dots, can be controlled all electrically when applying voltages to gates close to the quantum dot structure. Rapid, subnanosecond modifications of the double quantum dot's charge configuration have been realized successfully. A small magnetic field gradient across the double quantum dot enables universal qubit control. Two modifications of the normal singlet-triplet encoding are introduced. (1) The six-electron configuration of a double quantum dot encodes a singlet-triplet qubit in the same way as for the two-electron double quantum dot. Two electrons at each quantum dot are irrelevant for the qubit manipulations because they are paired in a singlet state; the remaining two electrons encode the qubit. The qubit's wave function is immune to charge noise at moderate out-of-plane magnetic fields. (2) A singlet-triplet qubit encoded using two quantum dots of different sizes has an orbital state degeneracy of the singlet state and the spinless triplet state at finite out-of-plane magnetic fields. Spin-orbit interactions lift this state degeneracy, while the magnitude of the state coupling is determined by the size difference of the QDs. This setup enables the manipulations of singlet-triplet qubits without the need for magnetic field gradients. Finally, two-qubit gates between singlet-triplet qubits are proposed that use mediated exchange interactions via one quantum state. These operations are well controlled and highly noise insensitive. Orbital interactions alone can control spin qubits coded in a three electron Hilbert space. For example, the exchange-only qubit is encoded using three singly occupied quantum dots. The exchange interactions of two quantum dot pairs need to be modified to manipulate this qubit. The noise sensitivity of the exchange-only qubit is discussed. Alternatively, a three-electron qubit at a double quantum dot can be operated when single electrons are transferred between the quantum dots. Fast, subnanosecond manipulations of the double quantum dot's charge configuration are required to realize single-qubit gates. A novel two-qubit pulse gate for the three-electron double quantum dot qubit is proposed.

•Jan 1, 2014•0 citations

Superconducting singlet-triplet qubits

Anatoliy Lotkov, Maria Spethmann, Daniel Loss

Hybrid devices integrating quantum dots with Josephson junctions are gaining interest because they combine spin-based quantum computing with circuit quantum electrodynamics (circuit QED) methods. In particular, Andreev spin qubits have shown significant experimental progress including strong two-qubit coupling, and are predicted to exhibit all-to-all connectivity. Here we propose superconducting singlet-triplet (SST) qubits that rely on parallel-aligned double quantum dots in Josephson junctions. While Andreev spin qubits require spin-orbit interaction to unlock the spin degree-of-freedom, SST qubits do not require spin-orbit interaction, making the advantages of hybrid devices available to a wider range of materials. Similar to Andreev spin qubits, the qubit states couple to the superconducting phase across the junction, which allows for control and readout using circuit QED, and supports all-to-all connectivity. Only $N$ flux lines are required to perform any single- and two-qubit gate among $N$ qubits, and thus the overhead of control lines is small. Finally, linear protection from charge or flux noise makes these qubits interesting candidates for a future quantum processor.

quant-pharXiv:2607.09508•Jul 13, 2026•0 citations

Programable two-qubit gates in capacitively coupled flopping-mode spin qubits

Jorge Cayao, Mónica Benito, Guido Burkard

Recent achievements in the field of gate-defined semiconductor quantum dots reinforce the concept of a spin-based quantum computer consisting of nodes of locally connected qubits which communicate with each other via superconducting circuit resonator photons. In this paper, we theoretically demonstrate a versatile set of quantum gates between adjacent spin qubits defined in semiconductor quantum dots situated within the same node of such a spin-based quantum computer. The electric dipole acquired by the spin of an electron that moves across a double quantum dot potential in a magnetic field gradient has enabled strong coupling to resonator photons and low-power spin control. Here we show that this flopping-mode spin qubit also provides the tunability to program multiple two-qubit gates. Since the capacitive coupling between these qubits brings about additional dephasing, we calculate the estimated infidelity of different two-qubit gates in the most immediate possible experimental realizations.

arXiv:2003.02137•Physical review. B./Physical review. B•May 26, 2020•21 citations

Coupling a single electron spin to a microwave resonator: controlling transverse and longitudinal couplings

Félix Beaudoin, Dany Lachance-Quirion, W. A. Coish +1 more

Microwave-frequency superconducting resonators are ideally suited to perform dispersive qubit readout, to mediate two-qubit gates, and to shuttle states between distant quantum systems. A prerequisite for these applications is a strong qubit-resonator coupling. Strong coupling between an electron-spin qubit and a microwave resonator can be achieved by correlating spin- and orbital degrees of freedom. This correlation can be achieved through the Zeeman coupling of a single electron in a double quantum dot to a spatially inhomogeneous magnetic field generated by a nearby nanomagnet. In this paper, we consider such a device and estimate spin-resonator couplings of order ∼1 MHz with realistic parameters. Further, through realistic simulations, we show that precise placement of the double-dot relative to the nanomagnet allows to select between a purely longitudinal coupling (commuting with the bare spin Hamiltonian) and a purely transverse (spin non-conserving) coupling. Additionally, we suggest methods to mitigate dephasing and relaxation channels that are introduced in this coupling scheme. This analysis gives a clear route toward the realization of coherent state transfer between a microwave resonator and a single electron spin in a GaAs double quantum dot with a fidelity above 90%. Improved dynamical decoupling sequences, low-noise environments, and longer-lived microwave cavity modes may lead to substantially higher fidelities in the near future.

arXiv:1606.04736•Nanotechnology•Oct 17, 2016•64 citations

Quantum information processing in semiconductor quantum dots using single and multi-spin qubits

Maximilian Rimbach-Russ

Quantum information processing in semiconductor quantum dots using single and multi-spin qubitsThe idea of a quantum computer, a device capable of processing information using quantum bits (qubit) instead of classical bits that outperforms classical computer in terms of computation speed, is still science ction. However, recent advances in quantum information processing showed that this ction may come true faster than anticipated. A promising platform for the physical realization of a qubit are spin qubits where the information is encoded in the quantum mechanical spin of an electron con ned in a semiconductor quantum dot. There are a variety of di erent implementations how the logical qubit is physically encoded, the use of a single electron spin or the use of the spins of multi electrons. This thesis focuses on the implementation of the spin- 1/2 qubit using the spin of a single electron in a single quantum dot, the exchangeonly (EO) qubit using three electron spins distributed in three quantum dots, and the novel quadrupolar exchange-only (QUEX) qubit using four electron spins distributed in three quantum dots. In this thesis we investigate several theoretical aspects of the physical implementation of the aforementioned qubit encodings. Since all three qubit encodings are allelectric controlled these implementations su er decoherence, the loss of information, from electric uctuations of the environment commonly called charge noise. Typically, the use of more quantum dots increases the decoherence due to charge noise while it decreases the decoherence due to magnetic noise. The rst main aspect investigated in this thesis is the protection of the quantum information encoded in the di erent qubit implementations against charge noise. Special attention is paid to the multi-electron spin implementations where high-symmetry points of operation are discovered which are less sensitive to the charge noise. Protection against charge noise is even better by increasing the number of electrons while keeping the number of quantum dots making the QUEX qubit superior to the EO qubit. So far the main direction in this thesis is the reduction of the qubit sensitivity to electric uctuations. However, coherent electromagnetic elds in form of microwaves v can be used to interconnect qubits. In this thesis also a high-performance coupling between two spin-1/2 is investigated. The use of a resonator, subsequently, allows for a coupling of qubits over macroscopic distances as well as to extract valuable information about the physical system. Because of the larger susceptibility of multi-spin qubits to the electric eld of the resonator, this thesis focuses on the coupling between an EO or a QUEX qubit and a microwave resonator. Points of operations are discovered for both qubit implementations which o er a strong coupling towards a microwave resonator while maintaining their protection against charge noise. Subsequently, a series of measurements are proposed to extract information about the microscopic structure of the quantum dots. Finally, a promising high-performance protocol for coupling two qubits remotely via the resonator is investigated in detail.

•Jan 1, 2019•0 citations
Semiconductor-based spin qubits embedded into a superconducting microwave cavity constitute a fast-progressing and promising platform for realizing fast and fault-tolerant qubit control with long-range two-qubit coupling. The flopping-mode spin qubit consists of a single electron in a double quantum dot; it combines a charge qubit with a spin qubit. With its strong and tunable cavity coupling, the flopping-mode qubit is proven to be well suited for low-power qubit control and cavity-mediated long-range quantum gates. The singlet-triplet (ST) and exchange-only (EO) qubits are multielectron realizations that go without broadband control and are protected from some types of noise, but are challenging to couple to each other and to microwave cavities. We combine the flopping-mode concept with the ST and EO qubits and propose two new flopping-mode qubits that consist of three (four) quantum dots, occupied by two (three) electrons near the ( 1 , 0 , 1 ) ↔ ( 0 , 1 , 1 ) [ ( 1 , 0 , 1 , 1 ) ↔ ( 0 , 1 , 1 , 1 ) ] charge transition. The two-electron system augments the ST 0 spin qubit with a charge qubit that interacts transversally and longitudinally with a cavity. Both couplings are highly tunable, and the longitudinal coupling distinguishes the flopping-mode ST qubit from the regular flopping-mode qubit. The longitudinal coupling allows for nondissipative universal control similar to superconducting transmon qubits. The EO flopping-mode qubit comprises four dots occupied by three electrons and opens a new possibility to perform two-qubit gates for EO qubits that are challenging to perform directly with the exchange coupling. We use input-output theory to provide means of extracting the coupling strengths from cavity transmission data.
Hybrid systems comprising superconducting and semiconducting materials are promising architectures for quantum computing. Superconductors induce long-range interactions between the spin degrees of freedom of semiconducting quantum dots. These interactions are widely anisotropic when the semiconductor material has strong spin-orbit interactions. We show that this anisotropy is tunable and enables fast and high-fidelity two-qubit gates between singlet-triplet (ST) spin qubits. Our design is immune to leakage of the quantum information into noncomputational states and removes always-on interactions between the qubits, thus resolving key open challenges for these architectures. Our ST qubits do not require additional technologically demanding components nor fine-tuning of parameters. They operate at low magnetic fields of a few millitesla and are fully compatible with superconductors. By suppressing systematic errors in realistic devices, we estimate infidelities below ${10}^{\ensuremath{-}3}$, which could pave the way toward large-scale hybrid superconducting-semiconducting quantum processors.
A two-level quantum system is the building block of a quantum computer. This pair of quantum states defines the computational unit of a quantum computer, and it is called a quantum bit or qubit in analogy to the bit that is the binary unit of a classical computer. The spin of a single electron naturally defines such a two-level quantum system. A quantum dot can be tuned to the single-electron regime, and an array of singly occupied quantum dots provides a multi-qubit register. This thesis describes the multielectron encoding of a spin qubit using a pair or a trio of quantum dots, and it analyzes the coherence properties and manipulation protocols of this system. The singlet-triplet qubit, coded using the singlet state and the spinless triplet state of a pair of singly occupied quantum dots, can be controlled all electrically when applying voltages to gates close to the quantum dot structure. Rapid, subnanosecond modifications of the double quantum dot's charge configuration have been realized successfully. A small magnetic field gradient across the double quantum dot enables universal qubit control. Two modifications of the normal singlet-triplet encoding are introduced. (1) The six-electron configuration of a double quantum dot encodes a singlet-triplet qubit in the same way as for the two-electron double quantum dot. Two electrons at each quantum dot are irrelevant for the qubit manipulations because they are paired in a singlet state; the remaining two electrons encode the qubit. The qubit's wave function is immune to charge noise at moderate out-of-plane magnetic fields. (2) A singlet-triplet qubit encoded using two quantum dots of different sizes has an orbital state degeneracy of the singlet state and the spinless triplet state at finite out-of-plane magnetic fields. Spin-orbit interactions lift this state degeneracy, while the magnitude of the state coupling is determined by the size difference of the QDs. This setup enables the manipulations of singlet-triplet qubits without the need for magnetic field gradients. Finally, two-qubit gates between singlet-triplet qubits are proposed that use mediated exchange interactions via one quantum state. These operations are well controlled and highly noise insensitive. Orbital interactions alone can control spin qubits coded in a three electron Hilbert space. For example, the exchange-only qubit is encoded using three singly occupied quantum dots. The exchange interactions of two quantum dot pairs need to be modified to manipulate this qubit. The noise sensitivity of the exchange-only qubit is discussed. Alternatively, a three-electron qubit at a double quantum dot can be operated when single electrons are transferred between the quantum dots. Fast, subnanosecond manipulations of the double quantum dot's charge configuration are required to realize single-qubit gates. A novel two-qubit pulse gate for the three-electron double quantum dot qubit is proposed.
Hybrid devices integrating quantum dots with Josephson junctions are gaining interest because they combine spin-based quantum computing with circuit quantum electrodynamics (circuit QED) methods. In particular, Andreev spin qubits have shown significant experimental progress including strong two-qubit coupling, and are predicted to exhibit all-to-all connectivity. Here we propose superconducting singlet-triplet (SST) qubits that rely on parallel-aligned double quantum dots in Josephson junctions. While Andreev spin qubits require spin-orbit interaction to unlock the spin degree-of-freedom, SST qubits do not require spin-orbit interaction, making the advantages of hybrid devices available to a wider range of materials. Similar to Andreev spin qubits, the qubit states couple to the superconducting phase across the junction, which allows for control and readout using circuit QED, and supports all-to-all connectivity. Only NNN flux lines are required to perform any single- and two-qubit gate among NNN qubits, and thus the overhead of control lines is small. Finally, linear protection from charge or flux noise makes these qubits interesting candidates for a future quantum processor.
Recent achievements in the field of gate-defined semiconductor quantum dots reinforce the concept of a spin-based quantum computer consisting of nodes of locally connected qubits which communicate with each other via superconducting circuit resonator photons. In this paper, we theoretically demonstrate a versatile set of quantum gates between adjacent spin qubits defined in semiconductor quantum dots situated within the same node of such a spin-based quantum computer. The electric dipole acquired by the spin of an electron that moves across a double quantum dot potential in a magnetic field gradient has enabled strong coupling to resonator photons and low-power spin control. Here we show that this flopping-mode spin qubit also provides the tunability to program multiple two-qubit gates. Since the capacitive coupling between these qubits brings about additional dephasing, we calculate the estimated infidelity of different two-qubit gates in the most immediate possible experimental realizations.
Microwave-frequency superconducting resonators are ideally suited to perform dispersive qubit readout, to mediate two-qubit gates, and to shuttle states between distant quantum systems. A prerequisite for these applications is a strong qubit-resonator coupling. Strong coupling between an electron-spin qubit and a microwave resonator can be achieved by correlating spin- and orbital degrees of freedom. This correlation can be achieved through the Zeeman coupling of a single electron in a double quantum dot to a spatially inhomogeneous magnetic field generated by a nearby nanomagnet. In this paper, we consider such a device and estimate spin-resonator couplings of order ∼1 MHz with realistic parameters. Further, through realistic simulations, we show that precise placement of the double-dot relative to the nanomagnet allows to select between a purely longitudinal coupling (commuting with the bare spin Hamiltonian) and a purely transverse (spin non-conserving) coupling. Additionally, we suggest methods to mitigate dephasing and relaxation channels that are introduced in this coupling scheme. This analysis gives a clear route toward the realization of coherent state transfer between a microwave resonator and a single electron spin in a GaAs double quantum dot with a fidelity above 90%. Improved dynamical decoupling sequences, low-noise environments, and longer-lived microwave cavity modes may lead to substantially higher fidelities in the near future.
Quantum information processing in semiconductor quantum dots using single and multi-spin qubitsThe idea of a quantum computer, a device capable of processing information using quantum bits (qubit) instead of classical bits that outperforms classical computer in terms of computation speed, is still science ction. However, recent advances in quantum information processing showed that this ction may come true faster than anticipated. A promising platform for the physical realization of a qubit are spin qubits where the information is encoded in the quantum mechanical spin of an electron con ned in a semiconductor quantum dot. There are a variety of di erent implementations how the logical qubit is physically encoded, the use of a single electron spin or the use of the spins of multi electrons. This thesis focuses on the implementation of the spin- 1/2 qubit using the spin of a single electron in a single quantum dot, the exchangeonly (EO) qubit using three electron spins distributed in three quantum dots, and the novel quadrupolar exchange-only (QUEX) qubit using four electron spins distributed in three quantum dots. In this thesis we investigate several theoretical aspects of the physical implementation of the aforementioned qubit encodings. Since all three qubit encodings are allelectric controlled these implementations su er decoherence, the loss of information, from electric uctuations of the environment commonly called charge noise. Typically, the use of more quantum dots increases the decoherence due to charge noise while it decreases the decoherence due to magnetic noise. The rst main aspect investigated in this thesis is the protection of the quantum information encoded in the di erent qubit implementations against charge noise. Special attention is paid to the multi-electron spin implementations where high-symmetry points of operation are discovered which are less sensitive to the charge noise. Protection against charge noise is even better by increasing the number of electrons while keeping the number of quantum dots making the QUEX qubit superior to the EO qubit. So far the main direction in this thesis is the reduction of the qubit sensitivity to electric uctuations. However, coherent electromagnetic elds in form of microwaves v can be used to interconnect qubits. In this thesis also a high-performance coupling between two spin-1/2 is investigated. The use of a resonator, subsequently, allows for a coupling of qubits over macroscopic distances as well as to extract valuable information about the physical system. Because of the larger susceptibility of multi-spin qubits to the electric eld of the resonator, this thesis focuses on the coupling between an EO or a QUEX qubit and a microwave resonator. Points of operations are discovered for both qubit implementations which o er a strong coupling towards a microwave resonator while maintaining their protection against charge noise. Subsequently, a series of measurements are proposed to extract information about the microscopic structure of the quantum dots. Finally, a promising high-performance protocol for coupling two qubits remotely via the resonator is investigated in detail.