Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2606.14124 · IEEE Transactions on Terahertz Science and Technology

Demonstration of a Single-Chip Dual-Polarization Sideband-Separation SIS Mixer At 2 Mm Band

Wenlei Shan, Shohei Ezaki, Yoshinori Uzawa

Published Jan 1, 2026• 1 citation
arXivHTMLPDF

Abstract

Large-format heterodyne focal plane arrays require highly integrated receiver architectures while maintaining low noise and sufficient sideband rejection, which remains challenging for superconducting SIS mixers at millimeter wavelengths. In this work, we demonstrate, for the first time, a monolithic dual-polarization sideband-separating superconductor-insulator-superconductor (SIS) mixer operating at 2 mm wavelengths (125-163 GHz) on a silicon-on-insulator substrate. The integrated SIS mixer achieves a sideband rejection ratio exceeding 10 dB over the 4-8 GHz intermediate-frequency (IF) band across most of the radio-frequency (RF) range, with a minimum single-sideband (SSB) receiver noise temperature as low as approximately 60 K. As a key building block of the hybrid planar integration (HPI) architecture, this result verifies the feasibility of highly integrated large-format heterodyne focal plane arrays, providing a practical path toward substantially expanding the field of view of millimeter and submillimeter-wave radio telescopes.

DOI
10.1109/tthz.2026.3736224

Related papers

Design and Performance of a Sideband Separating SIS Mixer for 800–950 GHz

Andrey V. Khudchenko, M. Yu. Fominsky, Christopher Heiter +11 more

We present the design and results of characterization of a new sideband separating (2SB) mixer for 800-950 GHz, based on superconductor-insulator-superconductor (SIS) junctions. This is the first waveguide 2SB SIS mixer demonstrated at such a high frequency. The design is following the classical quadrature hybrid architecture, meanwhile additional attention was put on the reduction of reflections in the RF structure in order to minimize the RF imbalance, to achieve a high image rejection ratio (IRR). The RF waveguide block was manufactured by micromilling and populated by single-ended SIS mixers developed earlier for upgrade of the CHAMP+ high-band array on the APEX telescope. These SIS mixers have double-sideband (DSB) noise temperatures from 210 to 400 K. The assembled 2SB mixer yields a SSB noise temperature from 450 to 900 K, with an IRR above 15 dB in 95% of the band. Comparing the DSB and the SSB sensitivities, we find that the waveguide losses are as low as expected and do not exceed 0.6 dB. The presented mixer is a prototype for use in a 2SB dual polarization receiver planned for deployment on the APEX telescope.

IEEE Transactions on Terahertz Science and Technology•Sep 2, 2019•21 citations

Low-noise integrated balanced SIS mixer for 787–950 GHz

Yasunori Fujii, Takafumi Kojima, Álvaro González +5 more

Abstract We developed a low-noise, compact, balanced superconductor–insulator–superconductor (SIS) mixer, operating in the 787–950 GHz radio frequency range. A waveguide mixer block was designed to integrate all the key components, such as a radio frequency (RF) 90° hybrid coupler, two identical SIS mixer chips, bias-tees, and an intermediate frequency power-combiner. The RF waveguide 90° hybrid coupler consists of branch lines with wide slots optimized by numerical simulation, for ease of fabrication. The balanced mixer was installed into a cartridge type receiver, originally developed for the Atacama Large Millimeter/submillimeter Array Band 10 (787–950 GHz). The receiver demonstrated double sideband noise temperatures of approximately 200 K for most of the band, without any correction for loss in front of the receiver. The local oscillator noise rejection ratio was estimated to be more than 15 dB within the measured frequency range.

Superconductor Science and Technology•Nov 30, 2016•13 citations

A Compact Superconducting Heterodyne Focal Plane Array Implemented With HPI (Hybrid Planar Integration) Scheme

Wenlei Shan, Shohei Ezaki, Haoran Kang +3 more

The article is concerned with the experimental evidence that proves technical feasibility of the hybrid planar integration (HPI) scheme that has been proposed to construct superconductor-insulator-superconductor (SIS) mixer focal plane arrays of unprecedented compactness. The scheme is characterized by the adoption of silicon membrane-based waveguide probes, which allows superconducting monolithic microwave integrated circuits to couple signal, and local oscillator (LO) from (computer numerical control)-machined waveguides through multiple paths. A 2 x 2 dual-polarization balanced SIS mixer array has been implemented with this scheme, and assessed in 125 - 163 GHz RF band. This compact array has demonstrated uniform LO distribution, and low crosstalk between pixels. The RF performance of component pixels has been confirmed to be little affected by the high-degree integration. The potential implementation of the HPI scheme at THz frequencies is also discussed.

IEEE Transactions on Terahertz Science and Technology•Sep 18, 2020•22 citations

Design Of Dual Polarisation Sideband Separation Mixer For ALMA Band 5

Bhushan Billade

This licentiate is focused on the design and development of Superconductor-Insulator-Superconductor (SIS) junction mixer for ALMA Band 5, one of the ten frequency bands of the Atacama Large Millimeter Array (ALMA) project. ALMA Band 5 is a dual polarisation sideband separation heterodyne receiver covering radio frequencies (RF) from 163 GHz to 211 GHz, with 4-8 GHz intermediate frequency (IF). Amongst the other ALMA bands, Band 5 is the lowest frequency band, which uses all-cold optics. That puts strong constrains on the dimensions of all the receiver components. For the SIS mixer, we employ a MMIC-like approach where most of the DSB mixer components, including LO injection circuitry with novel directional coupler, are integrated on the same crystal quartz substrate. The mixer uses a lumped filter technique to extract the IF frequencies, which is non-traditional for SIS mixers. A custom made superconducting Lange coupler with suspended air bridges to connect the fingers of Lange coupler is used. Experimental measurements of the double sideband mixer show state of the art performance with the receiver noise temperature below 30 Kelvin across the entire band. The noise temperature for sideband separation mixer is below 60 Kelvin with sideband rejection better than 12 dB over most of the band.

•Sep 1, 2009•1 citation

Band-combining SIS mixer designs across 150-400 GHz

J-H Kim, F Boussaha, C Chaumont +2 more

We present the designs of single-ended double sideband (DSB) superconductor-insulator-superconductor (SIS) mixers with broad radio frequency (RF) bandwidths combining Atacama Large Millimeter/sub-millimeter Array (ALMA) bands 5 plus 6 (163-273 GHz), and bands 6 plus 7 (211-373 GHz). We include both end-loaded stub and twin junction tuning methods to produce a suite of streamlined DSB mixer aiming for future applications such as sideband separating receivers. The designs feature silicon-on-insulator (SOI) substrates and gold beam leads. To broaden the intermediate frequency (IF) bandwidth, we incorporate IF matching circuits with external printed circuit boards (PCBs). Preliminary results from the fabrication and assembly process will follow a detailed analysis of the design.

•Jan 1, 2025•0 citations

An SIS-based sideband-separating heterodyne mixer optimized for the 600 to 720 GHz band

Fausto Patricio Mena, J. Kooi, Andrey M. Baryshev +4 more

The Atacama Large Millimeter Array (ALMA) is the largest radio astronomical enterprise ever proposed. When completed, each of its 64 constituting radio-telescopes will be able to hold 10 heterodyne receivers covering the spectroscopic windows allowed by the atmospheric transmission at the construction site, the altiplanos of the northern Chilean Andes. In contrast to the sideband-separating (2SB) receivers being developed at low frequencies, double-side-band (DSB) receivers are being developed for the highest two spectroscopic windows (bands 9 and 10). Despite of the well known advantages of 2SB mixers over their DSB counterparts, they have not been implemented at the highest-frequency bands as the involved dimensions for some of the radio frequency components are prohibitory small. However, the current state-of-the-art micromachining technology has proved that the structures necessary for this development are attainable. Here we report the design, modeling, realization, and characterization of a 2SB mixer for band 9 of ALMA (600 to 720 GHz). At the heart of the mixer, two superconductor-insulator-superconductor (SIS) junctions are used as mixing elements. The constructed instrument presents an excellent performance as shown by two important figures of merit: noise temperature of the system and side band ratio, both of them within ALMA specifications.

Journal of Physics Conference Series•Feb 1, 2008•3 citations
Large-format heterodyne focal plane arrays require highly integrated receiver architectures while maintaining low noise and sufficient sideband rejection, which remains challenging for superconducting SIS mixers at millimeter wavelengths. In this work, we demonstrate, for the first time, a monolithic dual-polarization sideband-separating superconductor-insulator-superconductor (SIS) mixer operating at 2 mm wavelengths (125-163 GHz) on a silicon-on-insulator substrate. The integrated SIS mixer achieves a sideband rejection ratio exceeding 10 dB over the 4-8 GHz intermediate-frequency (IF) band across most of the radio-frequency (RF) range, with a minimum single-sideband (SSB) receiver noise temperature as low as approximately 60 K. As a key building block of the hybrid planar integration (HPI) architecture, this result verifies the feasibility of highly integrated large-format heterodyne focal plane arrays, providing a practical path toward substantially expanding the field of view of millimeter and submillimeter-wave radio telescopes.
We present the design and results of characterization of a new sideband separating (2SB) mixer for 800-950 GHz, based on superconductor-insulator-superconductor (SIS) junctions. This is the first waveguide 2SB SIS mixer demonstrated at such a high frequency. The design is following the classical quadrature hybrid architecture, meanwhile additional attention was put on the reduction of reflections in the RF structure in order to minimize the RF imbalance, to achieve a high image rejection ratio (IRR). The RF waveguide block was manufactured by micromilling and populated by single-ended SIS mixers developed earlier for upgrade of the CHAMP+ high-band array on the APEX telescope. These SIS mixers have double-sideband (DSB) noise temperatures from 210 to 400 K. The assembled 2SB mixer yields a SSB noise temperature from 450 to 900 K, with an IRR above 15 dB in 95% of the band. Comparing the DSB and the SSB sensitivities, we find that the waveguide losses are as low as expected and do not exceed 0.6 dB. The presented mixer is a prototype for use in a 2SB dual polarization receiver planned for deployment on the APEX telescope.
Abstract We developed a low-noise, compact, balanced superconductor–insulator–superconductor (SIS) mixer, operating in the 787–950 GHz radio frequency range. A waveguide mixer block was designed to integrate all the key components, such as a radio frequency (RF) 90° hybrid coupler, two identical SIS mixer chips, bias-tees, and an intermediate frequency power-combiner. The RF waveguide 90° hybrid coupler consists of branch lines with wide slots optimized by numerical simulation, for ease of fabrication. The balanced mixer was installed into a cartridge type receiver, originally developed for the Atacama Large Millimeter/submillimeter Array Band 10 (787–950 GHz). The receiver demonstrated double sideband noise temperatures of approximately 200 K for most of the band, without any correction for loss in front of the receiver. The local oscillator noise rejection ratio was estimated to be more than 15 dB within the measured frequency range.
The article is concerned with the experimental evidence that proves technical feasibility of the hybrid planar integration (HPI) scheme that has been proposed to construct superconductor-insulator-superconductor (SIS) mixer focal plane arrays of unprecedented compactness. The scheme is characterized by the adoption of silicon membrane-based waveguide probes, which allows superconducting monolithic microwave integrated circuits to couple signal, and local oscillator (LO) from (computer numerical control)-machined waveguides through multiple paths. A 2 x 2 dual-polarization balanced SIS mixer array has been implemented with this scheme, and assessed in 125 - 163 GHz RF band. This compact array has demonstrated uniform LO distribution, and low crosstalk between pixels. The RF performance of component pixels has been confirmed to be little affected by the high-degree integration. The potential implementation of the HPI scheme at THz frequencies is also discussed.
This licentiate is focused on the design and development of Superconductor-Insulator-Superconductor (SIS) junction mixer for ALMA Band 5, one of the ten frequency bands of the Atacama Large Millimeter Array (ALMA) project. ALMA Band 5 is a dual polarisation sideband separation heterodyne receiver covering radio frequencies (RF) from 163 GHz to 211 GHz, with 4-8 GHz intermediate frequency (IF). Amongst the other ALMA bands, Band 5 is the lowest frequency band, which uses all-cold optics. That puts strong constrains on the dimensions of all the receiver components. For the SIS mixer, we employ a MMIC-like approach where most of the DSB mixer components, including LO injection circuitry with novel directional coupler, are integrated on the same crystal quartz substrate. The mixer uses a lumped filter technique to extract the IF frequencies, which is non-traditional for SIS mixers. A custom made superconducting Lange coupler with suspended air bridges to connect the fingers of Lange coupler is used. Experimental measurements of the double sideband mixer show state of the art performance with the receiver noise temperature below 30 Kelvin across the entire band. The noise temperature for sideband separation mixer is below 60 Kelvin with sideband rejection better than 12 dB over most of the band.
We present the designs of single-ended double sideband (DSB) superconductor-insulator-superconductor (SIS) mixers with broad radio frequency (RF) bandwidths combining Atacama Large Millimeter/sub-millimeter Array (ALMA) bands 5 plus 6 (163-273 GHz), and bands 6 plus 7 (211-373 GHz). We include both end-loaded stub and twin junction tuning methods to produce a suite of streamlined DSB mixer aiming for future applications such as sideband separating receivers. The designs feature silicon-on-insulator (SOI) substrates and gold beam leads. To broaden the intermediate frequency (IF) bandwidth, we incorporate IF matching circuits with external printed circuit boards (PCBs). Preliminary results from the fabrication and assembly process will follow a detailed analysis of the design.
The Atacama Large Millimeter Array (ALMA) is the largest radio astronomical enterprise ever proposed. When completed, each of its 64 constituting radio-telescopes will be able to hold 10 heterodyne receivers covering the spectroscopic windows allowed by the atmospheric transmission at the construction site, the altiplanos of the northern Chilean Andes. In contrast to the sideband-separating (2SB) receivers being developed at low frequencies, double-side-band (DSB) receivers are being developed for the highest two spectroscopic windows (bands 9 and 10). Despite of the well known advantages of 2SB mixers over their DSB counterparts, they have not been implemented at the highest-frequency bands as the involved dimensions for some of the radio frequency components are prohibitory small. However, the current state-of-the-art micromachining technology has proved that the structures necessary for this development are attainable. Here we report the design, modeling, realization, and characterization of a 2SB mixer for band 9 of ALMA (600 to 720 GHz). At the heart of the mixer, two superconductor-insulator-superconductor (SIS) junctions are used as mixing elements. The constructed instrument presents an excellent performance as shown by two important figures of merit: noise temperature of the system and side band ratio, both of them within ALMA specifications.