Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Journal of Physics Conference Series

An SIS-based sideband-separating heterodyne mixer optimized for the 600 to 720 GHz band

Fausto Patricio Mena, J. Kooi, Andrey M. Baryshev, C. F. J. Lodewijk, Ronald Hesper, W. Wild, T. M. Klapwijk

Published Feb 1, 2008• 3 citations
Publisher

Abstract

The Atacama Large Millimeter Array (ALMA) is the largest radio astronomical enterprise ever proposed. When completed, each of its 64 constituting radio-telescopes will be able to hold 10 heterodyne receivers covering the spectroscopic windows allowed by the atmospheric transmission at the construction site, the altiplanos of the northern Chilean Andes. In contrast to the sideband-separating (2SB) receivers being developed at low frequencies, double-side-band (DSB) receivers are being developed for the highest two spectroscopic windows (bands 9 and 10). Despite of the well known advantages of 2SB mixers over their DSB counterparts, they have not been implemented at the highest-frequency bands as the involved dimensions for some of the radio frequency components are prohibitory small. However, the current state-of-the-art micromachining technology has proved that the structures necessary for this development are attainable. Here we report the design, modeling, realization, and characterization of a 2SB mixer for band 9 of ALMA (600 to 720 GHz). At the heart of the mixer, two superconductor-insulator-superconductor (SIS) junctions are used as mixing elements. The constructed instrument presents an excellent performance as shown by two important figures of merit: noise temperature of the system and side band ratio, both of them within ALMA specifications.

DOI
10.1088/1742-6596/97/1/012331

Related papers

Construction and Characterization of a Sideband-separating heterodyne mixer for Band 9 of ALMA

Fausto Patricio Mena, J. Kooi, Andrey M. Baryshev +4 more

In this article we present the design, modeling and construction of a side-band-separating (2SB) heterodyne receiver for the frequency range from 600 to 720 GHz that corresponds to band 9 band of ALMA. The characteristics of this receiver present a significant improvement over the current double-sideband (DSB) configuration currently under development. The core of the mixer consists of a quadrature hybrid, two LO injectors, two superconductor-insulator-superconductor (SIS) junctions, three signal-termination loads, and two IF filtering systems. All these parts were modeled and optimized prior construction. Our 2 mixer exploits waveguide technology and has been constructed in the split-block technique. We used state-of-the-art CNC micromachining which permitted us to obtain the small dimensions required for this frequency range. The constructed receiver presents a good performance but we suggest various ideas for further improvement.

•Jan 1, 2007•2 citations

Design Of Dual Polarisation Sideband Separation Mixer For ALMA Band 5

Bhushan Billade

This licentiate is focused on the design and development of Superconductor-Insulator-Superconductor (SIS) junction mixer for ALMA Band 5, one of the ten frequency bands of the Atacama Large Millimeter Array (ALMA) project. ALMA Band 5 is a dual polarisation sideband separation heterodyne receiver covering radio frequencies (RF) from 163 GHz to 211 GHz, with 4-8 GHz intermediate frequency (IF). Amongst the other ALMA bands, Band 5 is the lowest frequency band, which uses all-cold optics. That puts strong constrains on the dimensions of all the receiver components. For the SIS mixer, we employ a MMIC-like approach where most of the DSB mixer components, including LO injection circuitry with novel directional coupler, are integrated on the same crystal quartz substrate. The mixer uses a lumped filter technique to extract the IF frequencies, which is non-traditional for SIS mixers. A custom made superconducting Lange coupler with suspended air bridges to connect the fingers of Lange coupler is used. Experimental measurements of the double sideband mixer show state of the art performance with the receiver noise temperature below 30 Kelvin across the entire band. The noise temperature for sideband separation mixer is below 60 Kelvin with sideband rejection better than 12 dB over most of the band.

•Sep 1, 2009•1 citation

Design and performance of mass-produced sideband separating SIS mixers for ALMA band 4 receivers

Takafumi Kojima, Koichi Kuroiwa, Toshikazu Takahashi +4 more

Abstract We have designed and mass-produced low-noise sideband separating superconductor–insulator–superconductor (SIS) mixers for the Atacama Large Millimeter/submillimeter Array (ALMA) band 4 over the frequency range of 125–163 GHz. An integrated design was adopted for the band 4 sideband separating (2SB) mixer block because of the advantages it offers in terms of compactness, reduced testing time and lower cost. The mixer chip was designed to be robust for handling errors to avoid performance degradation caused by generation of the higher order mode in the mixer chip slot. Detailed analyses revealed its robustness and ability to ensure mass production of the 2SB mixers. Using the robust mixer design in addition to well-established waveguide technologies, all of the 2SB mixers met ALMA specifications for noise temperature and image rejection ratio.

Superconductor Science and Technology•Jul 30, 2015•3 citations

Band-combining SIS mixer designs across 150-400 GHz

J-H Kim, F Boussaha, C Chaumont +2 more

We present the designs of single-ended double sideband (DSB) superconductor-insulator-superconductor (SIS) mixers with broad radio frequency (RF) bandwidths combining Atacama Large Millimeter/sub-millimeter Array (ALMA) bands 5 plus 6 (163-273 GHz), and bands 6 plus 7 (211-373 GHz). We include both end-loaded stub and twin junction tuning methods to produce a suite of streamlined DSB mixer aiming for future applications such as sideband separating receivers. The designs feature silicon-on-insulator (SOI) substrates and gold beam leads. To broaden the intermediate frequency (IF) bandwidth, we incorporate IF matching circuits with external printed circuit boards (PCBs). Preliminary results from the fabrication and assembly process will follow a detailed analysis of the design.

•Jan 1, 2025•0 citations

Sideband Separating Mixer for atmospheric window 790-950 GHz

Andrey V. Khudchenko

We have developed a Sideband Separating (2SB) Mixer based on superconductor-insulator-superconductor (SIS) junctions for frequency range 790-950 GHz. In the first test this mixer demonstrated the noise temperature from 450 to 900 K and the image rejection ratio above 15dB in 95% of the band. The SIS mixers used here have DSB noise temperature form 220 to 400 K. These results show that RF waveguide hybrid structure for such a high frequencies can be manufactured with losses level below 0.8 dB. It makes attractive possible ALMA upgrade of Band 10 receivers to 2SB option, because the sensitivity for spectral lines observations can be improved by about 30% by using 2SB mixers instead of DSB ones.

•Jun 6, 2019•0 citations

Design and Development of SIS Mixers for ALMA Band 10

Wenlei Shan, Sheng‐Cai Shi, T. Matsunaga +4 more

We present the design and preliminary experimental results of superconductor-insulator-superconductor (SIS) mixers for Atacama large millimeter array (ALMA) band 10 (780-950GHz) receivers. To achieve wide frequency coverage as well as low noise temperature, we integrated high current density (10 kA/cm2) and small-sized (one micrometer in diameter) Nb/AlOx/Nb SIS junctions with a tuning microstrip line using NbTiN ground plane and Al wiring layers. High quality NbTiN films with Tc reaching 14.5 K and Al films with residual resistivity ratio as large as 15 have been achieved. To minimize the waveguide transmission loss and facilitate the fabrication of mixer block, a full height waveguide was adopted. The waveguide probe was optimized to achieve low input impedance in the frequency range of 780-950 GHz while adopting a backshort cavity of zero depth. Preliminary RF testing with a Nb/Al microstrip tuning circuit demonstrated a DSB receiver noise temperature about 400 K at 832.5 GHz, which promises the accommodation of receiver performance in ALMA specification with low loss NbTiN/Al microstrip lines.

IEEE Transactions on Applied Superconductivity•Jun 1, 2007•40 citations
The Atacama Large Millimeter Array (ALMA) is the largest radio astronomical enterprise ever proposed. When completed, each of its 64 constituting radio-telescopes will be able to hold 10 heterodyne receivers covering the spectroscopic windows allowed by the atmospheric transmission at the construction site, the altiplanos of the northern Chilean Andes. In contrast to the sideband-separating (2SB) receivers being developed at low frequencies, double-side-band (DSB) receivers are being developed for the highest two spectroscopic windows (bands 9 and 10). Despite of the well known advantages of 2SB mixers over their DSB counterparts, they have not been implemented at the highest-frequency bands as the involved dimensions for some of the radio frequency components are prohibitory small. However, the current state-of-the-art micromachining technology has proved that the structures necessary for this development are attainable. Here we report the design, modeling, realization, and characterization of a 2SB mixer for band 9 of ALMA (600 to 720 GHz). At the heart of the mixer, two superconductor-insulator-superconductor (SIS) junctions are used as mixing elements. The constructed instrument presents an excellent performance as shown by two important figures of merit: noise temperature of the system and side band ratio, both of them within ALMA specifications.
In this article we present the design, modeling and construction of a side-band-separating (2SB) heterodyne receiver for the frequency range from 600 to 720 GHz that corresponds to band 9 band of ALMA. The characteristics of this receiver present a significant improvement over the current double-sideband (DSB) configuration currently under development. The core of the mixer consists of a quadrature hybrid, two LO injectors, two superconductor-insulator-superconductor (SIS) junctions, three signal-termination loads, and two IF filtering systems. All these parts were modeled and optimized prior construction. Our 2 mixer exploits waveguide technology and has been constructed in the split-block technique. We used state-of-the-art CNC micromachining which permitted us to obtain the small dimensions required for this frequency range. The constructed receiver presents a good performance but we suggest various ideas for further improvement.
This licentiate is focused on the design and development of Superconductor-Insulator-Superconductor (SIS) junction mixer for ALMA Band 5, one of the ten frequency bands of the Atacama Large Millimeter Array (ALMA) project. ALMA Band 5 is a dual polarisation sideband separation heterodyne receiver covering radio frequencies (RF) from 163 GHz to 211 GHz, with 4-8 GHz intermediate frequency (IF). Amongst the other ALMA bands, Band 5 is the lowest frequency band, which uses all-cold optics. That puts strong constrains on the dimensions of all the receiver components. For the SIS mixer, we employ a MMIC-like approach where most of the DSB mixer components, including LO injection circuitry with novel directional coupler, are integrated on the same crystal quartz substrate. The mixer uses a lumped filter technique to extract the IF frequencies, which is non-traditional for SIS mixers. A custom made superconducting Lange coupler with suspended air bridges to connect the fingers of Lange coupler is used. Experimental measurements of the double sideband mixer show state of the art performance with the receiver noise temperature below 30 Kelvin across the entire band. The noise temperature for sideband separation mixer is below 60 Kelvin with sideband rejection better than 12 dB over most of the band.
Abstract We have designed and mass-produced low-noise sideband separating superconductor–insulator–superconductor (SIS) mixers for the Atacama Large Millimeter/submillimeter Array (ALMA) band 4 over the frequency range of 125–163 GHz. An integrated design was adopted for the band 4 sideband separating (2SB) mixer block because of the advantages it offers in terms of compactness, reduced testing time and lower cost. The mixer chip was designed to be robust for handling errors to avoid performance degradation caused by generation of the higher order mode in the mixer chip slot. Detailed analyses revealed its robustness and ability to ensure mass production of the 2SB mixers. Using the robust mixer design in addition to well-established waveguide technologies, all of the 2SB mixers met ALMA specifications for noise temperature and image rejection ratio.
We present the designs of single-ended double sideband (DSB) superconductor-insulator-superconductor (SIS) mixers with broad radio frequency (RF) bandwidths combining Atacama Large Millimeter/sub-millimeter Array (ALMA) bands 5 plus 6 (163-273 GHz), and bands 6 plus 7 (211-373 GHz). We include both end-loaded stub and twin junction tuning methods to produce a suite of streamlined DSB mixer aiming for future applications such as sideband separating receivers. The designs feature silicon-on-insulator (SOI) substrates and gold beam leads. To broaden the intermediate frequency (IF) bandwidth, we incorporate IF matching circuits with external printed circuit boards (PCBs). Preliminary results from the fabrication and assembly process will follow a detailed analysis of the design.
We have developed a Sideband Separating (2SB) Mixer based on superconductor-insulator-superconductor (SIS) junctions for frequency range 790-950 GHz. In the first test this mixer demonstrated the noise temperature from 450 to 900 K and the image rejection ratio above 15dB in 95% of the band. The SIS mixers used here have DSB noise temperature form 220 to 400 K. These results show that RF waveguide hybrid structure for such a high frequencies can be manufactured with losses level below 0.8 dB. It makes attractive possible ALMA upgrade of Band 10 receivers to 2SB option, because the sensitivity for spectral lines observations can be improved by about 30% by using 2SB mixers instead of DSB ones.
We present the design and preliminary experimental results of superconductor-insulator-superconductor (SIS) mixers for Atacama large millimeter array (ALMA) band 10 (780-950GHz) receivers. To achieve wide frequency coverage as well as low noise temperature, we integrated high current density (10 kA/cm2) and small-sized (one micrometer in diameter) Nb/AlOx/Nb SIS junctions with a tuning microstrip line using NbTiN ground plane and Al wiring layers. High quality NbTiN films with Tc reaching 14.5 K and Al films with residual resistivity ratio as large as 15 have been achieved. To minimize the waveguide transmission loss and facilitate the fabrication of mixer block, a full height waveguide was adopted. The waveguide probe was optimized to achieve low input impedance in the frequency range of 780-950 GHz while adopting a backshort cavity of zero depth. Preliminary RF testing with a Nb/Al microstrip tuning circuit demonstrated a DSB receiver noise temperature about 400 K at 832.5 GHz, which promises the accommodation of receiver performance in ALMA specification with low loss NbTiN/Al microstrip lines.