Useful quantum information processing ultimately requires operations over large Hilbert spaces, where logical information can be encoded efficiently and protected against noise. Harmonic oscillators naturally provide access to such high-dimensional spaces and enable hardware-efficient, error-correctable bosonic encodings. However, direct entangling operations between oscillators remains an outstanding challenge. Existing strategies typically rely on parametrically activating interactions that populate the excited states of an ancillary nonlinear element. This induces an effective interaction between the oscillators, at the expense of introducing additional dissipation channels and potential leakage from the encoded manifold. Here, we engineer a Raman-assisted cross-Kerr interaction between microwave photons hosted in two superconducting cavities, without exciting the nonlinear element, thereby suppressing coupler-induced decoherence. This approach generates a direct coupling between microwave photons that is exploited to implement a controlled-phase gate within the single- and two-photon subspaces of two oscillators, directly entangling them. Finally, we harness this dynamics to map the photon-number parity of a storage cavity onto an auxiliary oscillator rather than a nonlinear element, enabling error detection while protecting the storage mode from measurement-induced decoherence. Our work expands the bosonic circuit quantum electrodynamics (cQED) toolbox by enabling coherence-preserving direct photon-photon interactions between oscillators. This realizes an entangling gate that operates entirely within a bosonic code space while suppressing decoherence from nonlinear ancilla excitations, providing a key primitive for fault-tolerant bosonic quantum computing.
Useful quantum information processing ultimately requires operations over large Hilbert spaces, where logical information can be encoded efficiently and protected against noise. Harmonic oscillators naturally provide access to such high-dimensional spaces and enable hardware-efficient, error-correctable bosonic encodings. However, direct entangling operations between oscillators remains an outstanding challenge. Existing strategies typically rely on parametrically activating interactions that populate the excited states of an ancillary nonlinear element. This induces an effective interaction between the oscillators, at the expense of introducing additional dissipation channels and potential leakage from the encoded manifold. Here, we engineer a Raman-assisted cross-Kerr interaction between microwave photons hosted in two superconducting cavities, without exciting the nonlinear element, thereby suppressing coupler-induced decoherence. This approach generates a direct coupling between microwave photons that is exploited to implement a controlled-phase gate within the single- and two-photon subspaces of two oscillators, directly entangling them. Finally, we harness this dynamics to map the photon-number parity of a storage cavity onto an auxiliary oscillator rather than a nonlinear element, enabling error detection while protecting the storage mode from measurement-induced decoherence. Our work expands the bosonic circuit quantum electrodynamics (cQED) toolbox by enabling coherence-preserving direct photon-photon interactions between oscillators. This realizes an entangling gate that operates entirely within a bosonic code space while suppressing decoherence from nonlinear ancilla excitations, providing a key primitive for fault-tolerant bosonic quantum computing.
Abstract The rich dynamics and large Hilbert space of quantum harmonic oscillators make them natural candidates for hardware-efficient and error-correctable quantum information processing. However, implementing direct entangling operations between oscillators remains an outstanding challenge. Existing strategies typically rely on parametrically activating interactions that necessarily populate the excited states of a nonlinear coupler, introducing additional dissipation channels and potential leakage outside the encoded manifold. Here, we present a fundamentally different approach to generate nonlinear coupling between bosonic modes: a Raman-assisted cross-Kerr interaction between microwave photons hosted in two superconducting cavities, which does not populate the mediating coupler. Crucially, this dynamics preserves the bosonic code space throughout, which is essential for fault-tolerant bosonic quantum computation. We demonstrate that the engineered cross-Kerr can be used to directly implement controlled-phase gates between two oscillators encoded in the single- and two-photon subspaces. Further, we apply the engineered dynamics to implement code-space-preserving parity checks using one of the oscillators as an ancillary mode, demonstrating an all-bosonic syndrome extraction that extends the effective lifetime of a storage oscillator. This work establishes a qualitatively different strategy for bosonic control, providing a pathway toward fault-tolerant quantum information processing with purely bosonic gates and syndrome measurements.
Bosonic codes offer a hardware-efficient strategy for quantum error correction by redundantly encoding quantum information in the large Hilbert space of a harmonic oscillator. However, experimental realizations of these codes are often limited by ancilla errors propagating to the encoded logical qubit during syndrome measurements. The Kerr-cat qubit has been proposed as an ancilla for these codes due to its theoretically-exponential noise bias, which would enable fault-tolerant error syndrome measurements, but the coupling required to perform these syndrome measurements has not yet been demonstrated. In this work, we experimentally realize driven parametric coupling of a Kerr-cat qubit to a high-quality-factor microwave cavity and demonstrate a gate set that would enable universal quantum control of the cavity. We measure the decoherence of the cavity in the presence of the Kerr-cat and discover excess dephasing due to heating of the Kerr-cat to excited states. By engineering frequency-selective dissipation to counteract this heating, we are able to eliminate this dephasing, thereby demonstrating a high on-off ratio of control. Our results pave the way toward using the Kerr-cat to fault-tolerantly measure error syndromes of bosonic codes. Biased noise qubits, which can selectively suppress certain types of noise, are advantageous for quantum error correction of bosonic codes. Here the authors make an important step in this direction by demonstrating quantum control of a harmonic oscillator with a biased noise qubit.
Fast, high-fidelity operations between microwave resonators are an important tool for bosonic quantum computation and simulation with superconducting circuits. An attractive approach for implementing these operations is to couple these resonators via a nonlinear converter and actuate parametric processes with RF drives. It can be challenging to make these processes simultaneously fast and high fidelity, since this requires introducing strong drives without activating parasitic processes or introducing additional decoherence channels. We show that in addition to a careful management of drive frequencies and the spectrum of environmental noise, leveraging the inbuilt symmetries of the converter Hamiltonian can suppress unwanted nonlinear interactions, preventing converter-induced decoherence. We demonstrate these principles using a differentially-driven DC-SQUID as our converter, coupled to two high-Q microwave cavities. Using this architecture, we engineer a highly-coherent beamsplitter and fast (~100 ns) swaps between the cavities, limited primarily by their intrinsic single-photon loss. We characterize this beamsplitter in the cavities' joint single-photon subspace, and show that we can detect and post-select photon loss events to achieve a beamsplitter gate fidelity exceeding 99.98%, which to our knowledge far surpasses the current state of the art.
Abstract Bosonic quantum error correcting codes are primarily designed to protect against single-photon loss. To correct for this type of error, one can encode the logical qubit in code spaces with a definite photon parity, such as cat codes or binomial codes. Error correction requires a recovery operation that maps the error states—which have opposite parity—back onto the code space. Here, we realize a collection of photon-number-selective, simultaneous photon addition operations on a bosonic mode, a microwave cavity, assisted by a superconducting qubit. These operations are implemented as two-photon transitions that excite the cavity and the qubit at the same time. The additional degree of freedom of the qubit makes it possible to implement a coherent, unidirectional mapping between spaces of opposite photon parity. We present the successful experimental implementation of the drives and the phase control they enable on superpositions of Fock states. The presented technique, when supplemented with qubit reset, is suitable for autonomous quantum error correction in bosonic systems and, more generally, opens the possibility to realize a range of non-unitary transformations on a bosonic mode.
Superconducting circuits hosting long-lived bosonic modes are an excellent platform for emulating the dynamics of light and matter and exploiting them for quantum information processing. The space of accessible dynamics is greatly extended by introducing the frequency tunability of artificial atoms, whereby the interactions with the light field of a microwave cavity can be modified on demand. However, using external flux bias to control the frequency of transmons introduces significant losses to coupled cavities, reducing their single-photon lifetimes to a few tens of μs. These imperfections compromise the usefulness of the bosonic mode, which loses its ability to store and manipulate the quantum information of many-photon states. This thesis investigates the issue and demonstrates how to enhance the flux control of microwave cavities without compromising protection. Several hardware solutions were explored, including off-plane remote flux sources routed by a magnetic hose, and lithographically printed on-chip lines equipped with multiple stages of filtering. These developments equip the systems with broadband flux control and photon lifetimes of several hundred μs. They enable the real-time manipulation of the two central parameters of the Rabi model: detuning and coupling strength. This flexibility translates into operational primitives of interest, such as the calibration of nonlinearities to different interaction regimes, the activation of parametric resonances with adjustable coupling strengths, and the use of number-selective transmon-cavity transitions for qudit state preparation and control. These results lay the groundwork for exploring richer synthetic light-matter systems, controlling cavities with more complex nonlinear circuits, and engineering driven-dissipative systems with applications in quantum computation and sensing.
Quantum computing is a relatively new computing paradigm that leverages entanglement to implement algorithms beyond the reach of classical hardware. Superconducting quantum circuits have emerged as a platform to build quantum processors, with demonstrations of quantum supremacy over classical supercomputers and quantum error correction beyond fault tolerance. However, current noisy devices require significant improvements to unlock the full potential of quantum algorithms.This thesis investigates intrinsic noise channels in superconducting circuits and the design of noise-resilient qubits. By characterizing high-quality superconducting resonators, we identify lossy dielectric materials at the interfaces as the dominant loss mechanism, which we mitigate via targeted surface treatments. Subsequently, we leverage Josephson junction nonlinearity to engineer noise-biased qubits utilizing the Kerr parametric oscillator (KPO). By analyzing the efficiency of strong, far-off-resonance driving to facilitate three- and four-wave mixing processes, we demonstrate high-fidelity operations on Fock, Kerr-cat, and dual-rail qubits. For the Kerr-cat qubit, we introduce a novel 2D architecture that enables strong light-matter coupling with suppressed Purcell decay, yielding millisecond-scale bit-flip lifetimes. Within this same architecture, we demonstrate a longitudinal qubit readout with a 99.6% quantum nondemolition score, alongside a high-fidelity universal single-qubit gate set, all while maintaining bit-flip error suppression. Finally, we exploit the efficient wave-mixing of strongly coupled, far-detuned KPOs to realize a dynamically protected dual-rail qubit exhibiting both erasure bias and high-fidelity single-qubit gates.