Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2603.11293

Focusing Surface-Acoustic-Wave Resonators on Thin-Film Lithium Niobate with Transverse-Mode Suppression

Ryo Sasaki, Ryusuke Hisatomi, Rekishu Yamazaki, Yuya Yamaguchi, Yasunobu Nakamura, Atsushi Noguchi

quant-phphysics.opticsSubmitted Mar 11, 2026• Announced Mar 13, 2026
v1 · Mar 11, 2026v2 · Jul 21, 2026
arXivHTMLPDF

Abstract

Surface-acoustic-wave (SAW) resonators are a promising platform for constructing hybrid quantum systems, where confined acoustic waves enable strong interaction with various physical systems. Focusing SAW resonators, reducing mode volume while suppressing diffraction losses, have recently been investigated for application in such hybrid systems. However, the resonator leads to additional transverse-mode resonances, which cause undesired responses. In this work, we develop single-mode focusing SAW resonators on a thin-film lithium niobate on sapphire. A film thinner than the SAW wavelength allows a highly confined acoustic-wave mode to be localized on the substrate surface. By using contoured electrodes following a two-dimensional Gaussian beam shape, we make the SAW mode focused to nearly a diffraction-limited and confirm it via optical imaging. The apodization technique applied to the interdigitated transducer electrodes suppresses the excitation of higher-order transverse modes.

DOI
10.1103/5kq4-c6rr
Comments
10 pages, 9 figures

Related papers

Candidate overtone shear horizontal SAW resonators in thin-film lithium niobate for intermodal acousto-optic modulation

Wenbing Jiang, Xuankai Xu, Yu Guo +5 more

The merits of thin-film surface acoustic wave (SAW) devices are pivotal to develop the high-performance intermodal acousto-optic modulators. In this work, we have proposed shear-horizontal (SH) SAW resonators for anticipated intermodal acousto-optic modulation on the thin-film lithium niobate platform. Through optimization of the cut angle of LN films, the SAW wavelength, and the thickness of interdigital transducer (IDT) electrodes, the calculated acousto-optic overlap factors utilizing SH0 modes are improved by more than an order of magnitude compared with those of Rayleigh modes. Furthermore, we have fabricated and characterized three kinds of proof-of-principle SH0 mode devices without/with grating reflectors. The electromechanical coupling coefficients (keff^2) and quality factors (Q) in the overtone resonators with grating reflectors are systematically evaluated, featuring the highest Q of 843 with the compromised keff^2 of 0.96%-4.72%. The results reveal that the temperature coefficients of frequency (TCF) of Rayleigh modes vary across various overtones, whereas the SH0 modes exhibit TCFs in the range of 32.3-68.9 ppm/C. Our fabricated SH0-mode overtone resonators demonstrate the capability of operating at power levels up to 29 dBm without electrode damage, offering a promising paradigm for robust and high-efficiency intermodal acousto-optic modulators with potential applications in integrated optical signal processing, microwave photonics,and quantum information technologies.

physics.opticsCross-listedarXiv:2606.12853•Jun 12, 2026

On-chip integration and strong coupling between ScAlN thin-film surface acoustic wave resonators and superconducting qubits

Junfeng Chen, Xiaoliang He, Wanpeng Gao +6 more

Thin-film surface acoustic wave (SAW) devices exhibit high quality factors and are promising candidates for quantum transducers, with significant potential for on-chip integration with high-coherence superconducting quantum circuits and optical resonators. However, the experimental demonstration of strong coupling between thin-film SAWs and superconducting qubits in the quantum regime remains a considerable challenge. In this study, we demonstrate strong coupling between a ScAlN thin-film SAW resonator and a high-coherence qubit on the same substrate, where the enhanced qubit coherence was achieved through selective ScAlN etching. Distinct multimode anticrossings are observed in both the qubit and SAW resonator frequency spectra, with extracted coupling strengths closely matching theoretical predictions. Additionally, we investigate qubit decay and the dissipation properties of the SAW resonator in the SAW-qubit hybrid system. Our results confirm the feasibility of integrating thin-film SAW devices with high-coherence superconducting circuits and offer valuable insights for optimizing the performance of such hybrid systems.

Applied Physics Letters•Apr 1, 2025•6 citations

Thin film aluminum nitride surface acoustic wave resonators for quantum acoustodynamics

Wenbing Jiang, Junfeng Chen, Xiaoyu Liu +5 more

Quantum excitations of macroscopic surface acoustic waves (SAWs) have been tailored to control, communicate, and transduce stationary and flying quantum states. However, the limited lifetime of these hybrid quantum systems remains critical obstacles to extend their applications in quantum information processing. Here, we present potentials of thin film aluminum nitride to on-chip integrated phonons with superconducting qubits over previous bulk piezoelectric substrates. We have reported high-quality thin film GHz-SAW resonators with the highest internal quality factor Qi of 4.92×104 in the quantum regime. The internal losses of SAW resonators are systematically investigated by tuning the parameters of sample layout, power, and temperature. Our results manifest that SAWs on piezoelectric films are readily integrated with standard fabrication of Josephson junction quantum circuits and offer excellent acoustic platforms for high-coherence quantum acoustodynamics architectures.

arXiv:2304.00511•Applied Physics Letters•Jul 10, 2023•13 citations

Piezoelectric loss of superconducting microwave resonators integrated with thin-film lithium niobate

Likai Yang, Yuntao Xu, Chunzhen Li +3 more

Thin-film lithium niobate (LN) has become an enabling platform in the development of quantum integrated circuits, for applications including microwave-to-optical converters and electromechanical transducers. Incorporation of high-quality planar superconducting resonators will further elevate the performance of these devices. However, alongside the desired interactions originated from LN, its piezoelectric nature also introduces parasitic coupling between microwave and phononic modes, resulting in excessive dielectric loss. In this work, we investigate such coupling by studying niobium nitride resonators directly deposited on patterned LN thin films. By varying device configuration, we pinpoint that overlapping electric field with LN can inadvertently excite bulk acoustic modes within the substrate, inducing microwave loss independent of the acoustic dissipation rate. The experimental results are supported by simulation and theoretical modeling. Our approach can be applied to different piezoelectric systems and provide insights into the design of microwave components for quantum transduction devices.

Physical Review Applied•Nov 13, 2023•4 citations

Surface modification and coherence in lithium niobate SAW resonators

Rachel G. Gruenke, Oliver A. Hitchcock, E. Alex Wollack +5 more

Lithium niobate is a promising material for developing quantum acoustic technologies due to its strong piezoelectric effect and availability in the form of crystalline thin films of high quality. However, at radio frequencies and cryogenic temperatures, these resonators are limited by the presence of decoherence and dephasing due to two-level systems. To mitigate these losses and increase device performance, a more detailed picture of the microscopic nature of these loss channels is needed. In this study, we fabricate several lithium niobate acoustic wave resonators and apply different processing steps that modify their surfaces. These treatments include argon ion sputtering, annealing, and acid cleans. We characterize the effects of these treatments using three surface-sensitive measurements: cryogenic microwave spectroscopy measuring density and coupling of TLS to mechanics, X-ray photoelectron spectroscopy and atomic force microscopy. We learn from these studies that, surprisingly, increases of TLS density may accompany apparent improvements in the surface quality as probed by the latter two approaches. Our work outlines the importance that surfaces and fabrication techniques play in altering acoustic resonator coherence, and suggests gaps in our understanding as well as approaches to address them.

arXiv:2306.14813•Scientific Reports•Mar 20, 2024•21 citations

Heterogeneous Optically-Detected Spin-Acoustic Resonance in Solid-State Molecular Thin-film

Kuan-Cheng Chen, Yongqiang Wen, Xiaotian Xu +7 more

We report an implementation of spin-acoustic resonance in pentacene thin films integrated on a high-quality-factor (high-Q) surface acoustic wave (SAW) resonator on a lithium niobate substrate. Heterogeneous optically detected spin-acoustic resonance (HODSAR) is an optically detected spin-resonance measurement in which the resonant drive is delivered mechanically by a surface acoustic wave (SAW). By leveraging the photo-excited triplet state of pentacene at room temperature, we demonstrate coherent spin manipulation via acoustic driving under zero externally applied magnetic field. The heterogeneously integrated device, referred to as HODSAR, utilizes spin-phonon coupling to achieve mechanically driven, zero-field spin resonance, opening avenues for room-temperature mechanically addressable spin control and device integration. We show that the high-Q multimode response of the SAW resonator enables spectrally selective acoustic addressing of triplet transitions near 105 MHz. Coherent control is evidenced by Rabi oscillations, with a Rabi frequency that increases linearly with the square root of the applied RF input power over the measured drive range, consistent with driven two-level dynamics under acoustic excitation. These results establish spin-acoustic resonance in a heterogeneously integrated molecular thin-film platform and provide a quantitative basis for benchmarking mechanically mediated spin control.

quant-pharXiv:2602.08772•Feb 10, 2026
Surface-acoustic-wave (SAW) resonators are a promising platform for constructing hybrid quantum systems, where confined acoustic waves enable strong interaction with various physical systems. Focusing SAW resonators, reducing mode volume while suppressing diffraction losses, have recently been investigated for application in such hybrid systems. However, the resonator leads to additional transverse-mode resonances, which cause undesired responses. In this work, we develop single-mode focusing SAW resonators on a thin-film lithium niobate on sapphire. A film thinner than the SAW wavelength allows a highly confined acoustic-wave mode to be localized on the substrate surface. By using contoured electrodes following a two-dimensional Gaussian beam shape, we make the SAW mode focused to nearly a diffraction-limited and confirm it via optical imaging. The apodization technique applied to the interdigitated transducer electrodes suppresses the excitation of higher-order transverse modes.
The merits of thin-film surface acoustic wave (SAW) devices are pivotal to develop the high-performance intermodal acousto-optic modulators. In this work, we have proposed shear-horizontal (SH) SAW resonators for anticipated intermodal acousto-optic modulation on the thin-film lithium niobate platform. Through optimization of the cut angle of LN films, the SAW wavelength, and the thickness of interdigital transducer (IDT) electrodes, the calculated acousto-optic overlap factors utilizing SH0 modes are improved by more than an order of magnitude compared with those of Rayleigh modes. Furthermore, we have fabricated and characterized three kinds of proof-of-principle SH0 mode devices without/with grating reflectors. The electromechanical coupling coefficients (keff^2) and quality factors (Q) in the overtone resonators with grating reflectors are systematically evaluated, featuring the highest Q of 843 with the compromised keff^2 of 0.96%-4.72%. The results reveal that the temperature coefficients of frequency (TCF) of Rayleigh modes vary across various overtones, whereas the SH0 modes exhibit TCFs in the range of 32.3-68.9 ppm/C. Our fabricated SH0-mode overtone resonators demonstrate the capability of operating at power levels up to 29 dBm without electrode damage, offering a promising paradigm for robust and high-efficiency intermodal acousto-optic modulators with potential applications in integrated optical signal processing, microwave photonics,and quantum information technologies.
Thin-film surface acoustic wave (SAW) devices exhibit high quality factors and are promising candidates for quantum transducers, with significant potential for on-chip integration with high-coherence superconducting quantum circuits and optical resonators. However, the experimental demonstration of strong coupling between thin-film SAWs and superconducting qubits in the quantum regime remains a considerable challenge. In this study, we demonstrate strong coupling between a ScAlN thin-film SAW resonator and a high-coherence qubit on the same substrate, where the enhanced qubit coherence was achieved through selective ScAlN etching. Distinct multimode anticrossings are observed in both the qubit and SAW resonator frequency spectra, with extracted coupling strengths closely matching theoretical predictions. Additionally, we investigate qubit decay and the dissipation properties of the SAW resonator in the SAW-qubit hybrid system. Our results confirm the feasibility of integrating thin-film SAW devices with high-coherence superconducting circuits and offer valuable insights for optimizing the performance of such hybrid systems.
Quantum excitations of macroscopic surface acoustic waves (SAWs) have been tailored to control, communicate, and transduce stationary and flying quantum states. However, the limited lifetime of these hybrid quantum systems remains critical obstacles to extend their applications in quantum information processing. Here, we present potentials of thin film aluminum nitride to on-chip integrated phonons with superconducting qubits over previous bulk piezoelectric substrates. We have reported high-quality thin film GHz-SAW resonators with the highest internal quality factor Qi of 4.92×104 in the quantum regime. The internal losses of SAW resonators are systematically investigated by tuning the parameters of sample layout, power, and temperature. Our results manifest that SAWs on piezoelectric films are readily integrated with standard fabrication of Josephson junction quantum circuits and offer excellent acoustic platforms for high-coherence quantum acoustodynamics architectures.
Thin-film lithium niobate (LN) has become an enabling platform in the development of quantum integrated circuits, for applications including microwave-to-optical converters and electromechanical transducers. Incorporation of high-quality planar superconducting resonators will further elevate the performance of these devices. However, alongside the desired interactions originated from LN, its piezoelectric nature also introduces parasitic coupling between microwave and phononic modes, resulting in excessive dielectric loss. In this work, we investigate such coupling by studying niobium nitride resonators directly deposited on patterned LN thin films. By varying device configuration, we pinpoint that overlapping electric field with LN can inadvertently excite bulk acoustic modes within the substrate, inducing microwave loss independent of the acoustic dissipation rate. The experimental results are supported by simulation and theoretical modeling. Our approach can be applied to different piezoelectric systems and provide insights into the design of microwave components for quantum transduction devices.
Lithium niobate is a promising material for developing quantum acoustic technologies due to its strong piezoelectric effect and availability in the form of crystalline thin films of high quality. However, at radio frequencies and cryogenic temperatures, these resonators are limited by the presence of decoherence and dephasing due to two-level systems. To mitigate these losses and increase device performance, a more detailed picture of the microscopic nature of these loss channels is needed. In this study, we fabricate several lithium niobate acoustic wave resonators and apply different processing steps that modify their surfaces. These treatments include argon ion sputtering, annealing, and acid cleans. We characterize the effects of these treatments using three surface-sensitive measurements: cryogenic microwave spectroscopy measuring density and coupling of TLS to mechanics, X-ray photoelectron spectroscopy and atomic force microscopy. We learn from these studies that, surprisingly, increases of TLS density may accompany apparent improvements in the surface quality as probed by the latter two approaches. Our work outlines the importance that surfaces and fabrication techniques play in altering acoustic resonator coherence, and suggests gaps in our understanding as well as approaches to address them.
We report an implementation of spin-acoustic resonance in pentacene thin films integrated on a high-quality-factor (high-Q) surface acoustic wave (SAW) resonator on a lithium niobate substrate. Heterogeneous optically detected spin-acoustic resonance (HODSAR) is an optically detected spin-resonance measurement in which the resonant drive is delivered mechanically by a surface acoustic wave (SAW). By leveraging the photo-excited triplet state of pentacene at room temperature, we demonstrate coherent spin manipulation via acoustic driving under zero externally applied magnetic field. The heterogeneously integrated device, referred to as HODSAR, utilizes spin-phonon coupling to achieve mechanically driven, zero-field spin resonance, opening avenues for room-temperature mechanically addressable spin control and device integration. We show that the high-Q multimode response of the SAW resonator enables spectrally selective acoustic addressing of triplet transitions near 105 MHz. Coherent control is evidenced by Rabi oscillations, with a Rabi frequency that increases linearly with the square root of the applied RF input power over the measured drive range, consistent with driven two-level dynamics under acoustic excitation. These results establish spin-acoustic resonance in a heterogeneously integrated molecular thin-film platform and provide a quantitative basis for benchmarking mechanically mediated spin control.