Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2306.14813 · Scientific Reports

Surface modification and coherence in lithium niobate SAW resonators

Rachel G. Gruenke, Oliver A. Hitchcock, E. Alex Wollack, Christopher J. Sarabalis, Marc Jankowski, Timothy P. McKenna, Nathan Lee, Amir H. Safavi‐Naeini

Published Mar 20, 2024• 21 citations
arXivHTMLPDF

Abstract

Lithium niobate is a promising material for developing quantum acoustic technologies due to its strong piezoelectric effect and availability in the form of crystalline thin films of high quality. However, at radio frequencies and cryogenic temperatures, these resonators are limited by the presence of decoherence and dephasing due to two-level systems. To mitigate these losses and increase device performance, a more detailed picture of the microscopic nature of these loss channels is needed. In this study, we fabricate several lithium niobate acoustic wave resonators and apply different processing steps that modify their surfaces. These treatments include argon ion sputtering, annealing, and acid cleans. We characterize the effects of these treatments using three surface-sensitive measurements: cryogenic microwave spectroscopy measuring density and coupling of TLS to mechanics, X-ray photoelectron spectroscopy and atomic force microscopy. We learn from these studies that, surprisingly, increases of TLS density may accompany apparent improvements in the surface quality as probed by the latter two approaches. Our work outlines the importance that surfaces and fabrication techniques play in altering acoustic resonator coherence, and suggests gaps in our understanding as well as approaches to address them.

DOI
10.1038/s41598-024-57168-x

Related papers

Crystallinity in niobium oxides: A pathway to mitigate two-level-system defects in niobium three-dimensional resonators for quantum applications

Yasmine Kalboussi, I. Curci, F. Miserque +10 more

Materials imperfections in Nb -based superconducting quantum circuits—in particular, two-level-system (TLS) defects—are a major source of decoherence, ultimately limiting the performance of quantum computation and sensing. Thus, identifying and understanding the microscopic origin of possible TLS defects in these devices will help develop strategies that eliminate them, which are key to superconducting qubit performance improvement. In this paper, we demonstrate an order-of-magnitude reduction in two-level system losses in three-dimensional superconducting radio frequency (SRF) niobium resonators by a 10-h high vacuum (HV) heat treatment at 650 °C, even after exposure to air and high-pressure rinsing (HPR). X-ray photoelectron spectroscopy (XPS) and high-resolution scanning transmission electron microscopy (STEM) reveal an alteration of the native oxide composition regrown after air exposure and HPR and the creation of nanoscale crystalline oxide regions, which correlates with the measured tenfold quality factor enhancement at low fields of the 1.3 GHz niobium resonator. Tunneling spectroscopy measurements show a pronounced proximity effect that further confirms the presence of metallic layers on the niobium surface.

arXiv:2410.06805•Physical Review Applied•Apr 9, 2025•13 citations

Candidate overtone shear horizontal SAW resonators in thin-film lithium niobate for intermodal acousto-optic modulation

Wenbing Jiang, Xuankai Xu, Yu Guo +5 more

The merits of thin-film surface acoustic wave (SAW) devices are pivotal to develop the high-performance intermodal acousto-optic modulators. In this work, we have proposed shear-horizontal (SH) SAW resonators for anticipated intermodal acousto-optic modulation on the thin-film lithium niobate platform. Through optimization of the cut angle of LN films, the SAW wavelength, and the thickness of interdigital transducer (IDT) electrodes, the calculated acousto-optic overlap factors utilizing SH0 modes are improved by more than an order of magnitude compared with those of Rayleigh modes. Furthermore, we have fabricated and characterized three kinds of proof-of-principle SH0 mode devices without/with grating reflectors. The electromechanical coupling coefficients (keff^2) and quality factors (Q) in the overtone resonators with grating reflectors are systematically evaluated, featuring the highest Q of 843 with the compromised keff^2 of 0.96%-4.72%. The results reveal that the temperature coefficients of frequency (TCF) of Rayleigh modes vary across various overtones, whereas the SH0 modes exhibit TCFs in the range of 32.3-68.9 ppm/C. Our fabricated SH0-mode overtone resonators demonstrate the capability of operating at power levels up to 29 dBm without electrode damage, offering a promising paradigm for robust and high-efficiency intermodal acousto-optic modulators with potential applications in integrated optical signal processing, microwave photonics,and quantum information technologies.

physics.opticsCross-listedarXiv:2606.12853•Jun 12, 2026

Millisecond phonon lifetimes in piezoelectric nanomechanical resonators

Oliver A. Hitchcock, Matthew P. Maksymowych, Kaveh Pezeshki +5 more

Piezoelectric nanomechanical resonators operating at gigahertz frequencies are a promising platform for quantum information processing and precision sensing, but phonon lifetimes have been limited to the microsecond range, widely attributed to the higher intrinsic loss of piezoelectric materials. Here we show that this limitation is not fundamental. Using a fabrication process informed by recent studies of defect-mediated loss in lithium niobate, we combine chemical restoration of ion-milled surfaces with a shadow-mask metallization process to produce lithium niobate phononic crystal resonators with inferred internal phonon lifetimes of up to 21 milliseconds at 3.6 gigahertz, corresponding to quality factors exceeding $4\times10^8$ ($f\cdot Q_i > 10^{18}$) at millikelvin temperatures. By systematically varying the electrode-to-resonator spacing, we demonstrate that the measured lifetime is set by external coupling between the device and the measurement circuit rather than material loss. This establishes that lithium niobate, once fabrication-induced surface damage is removed, achieves an intrinsic quality comparable to the best mechanical materials while remaining an intrinsically piezoelectric platform with strong electromechanical coupling.

cond-mat.mes-hallCross-listedarXiv:2610.10700•Oct 9, 2026

Piezoelectric loss of superconducting microwave resonators integrated with thin-film lithium niobate

Likai Yang, Yuntao Xu, Chunzhen Li +3 more

Thin-film lithium niobate (LN) has become an enabling platform in the development of quantum integrated circuits, for applications including microwave-to-optical converters and electromechanical transducers. Incorporation of high-quality planar superconducting resonators will further elevate the performance of these devices. However, alongside the desired interactions originated from LN, its piezoelectric nature also introduces parasitic coupling between microwave and phononic modes, resulting in excessive dielectric loss. In this work, we investigate such coupling by studying niobium nitride resonators directly deposited on patterned LN thin films. By varying device configuration, we pinpoint that overlapping electric field with LN can inadvertently excite bulk acoustic modes within the substrate, inducing microwave loss independent of the acoustic dissipation rate. The experimental results are supported by simulation and theoretical modeling. Our approach can be applied to different piezoelectric systems and provide insights into the design of microwave components for quantum transduction devices.

Physical Review Applied•Nov 13, 2023•4 citations

Focusing Surface-Acoustic-Wave Resonators on Thin-Film Lithium Niobate with Transverse-Mode Suppression

Ryo Sasaki, Ryusuke Hisatomi, Rekishu Yamazaki +3 more

Surface-acoustic-wave (SAW) resonators are a promising platform for constructing hybrid quantum systems, where confined acoustic waves enable strong interaction with various physical systems. Focusing SAW resonators, reducing mode volume while suppressing diffraction losses, have recently been investigated for application in such hybrid systems. However, the resonator leads to additional transverse-mode resonances, which cause undesired responses. In this work, we develop focusing SAW resonators on a thin-film lithium niobate on sapphire. A film thinner than the SAW wavelength allows a highly confined acoustic-wave mode to be localized on the substrate surface. By using contoured electrodes following a two-dimensional Gaussian beam shape, we make the SAW mode focused to nearly a diffraction-limited and confirm it via optical imaging. Furthermore, by engineering the spatial mode overlap of the interdigital transducer electrodes, we suppress the excitation of higher-order transverse modes.

quant-pharXiv:2603.11293•Mar 13, 2026

Substrate surface engineering for high-quality silicon/aluminum superconducting resonators

C T Earnest, J. H. Béjanin, T G McConkey +4 more

Abstract Quantum bits (qubits) with long coherence times are an important element for the implementation of medium- and large-scale quantum computers. In the case of superconducting planar qubits, understanding and improving qubits’ quality can be achieved by studying superconducting planar resonators. In this paper, we fabricate and characterize coplanar waveguide resonators made from aluminum thin films deposited on silicon substrates. We perform three different substrate surface treatments prior to aluminum deposition: one chemical treatment based on a hydrofluoric acid clean; one physical treatment consisting of a thermal annealing at 880 °C in high vacuum; and one combined treatment comprising both the chemical and the physical treatments. The aim of these treatments is to remove the two-level state (TLS) defects hosted by the native oxides residing at the various samples’ interfaces. We first characterize the fabricated samples through cross-sectional tunneling electron microscopy, acquiring electron energy loss spectroscopy maps of the samples’ cross sections. These measurements show that both the chemical and the physical treatments almost entirely remove native silicon oxide from the substrate surface and that their combination results in the cleanest interface. Additionally, we analyze the effects of the various substrate treatments on the roughness of the silicon surface by means of atomic force microscopy surface morphology mapping. We then study the quality of the resonators by means of microwave measurements in the ‘quantum regime’, i.e., at a temperature T ∼ 10 mK and at a mean microwave photon number 〈 n ph 〉 ∼ 1 . In this regime, we find that both surface treatments independently improve the resonator’s intrinsic quality factor by ≈172%. The highest quality factor is obtained for the combined treatment, Q i ≈ 0.82 million, corresponding to an improvement by ≈256%. Finally, we find that the TLS quality factor averaged over a time period of 3 h is ∼3 million at 〈 n ph 〉 ∼ 10 , indicating that substrate surface engineering can potentially reduce the TLS loss below other losses such as quasiparticle loss and flux noise.

arXiv:1807.08072•Superconductor Science and Technology•Oct 1, 2018•77 citations
Lithium niobate is a promising material for developing quantum acoustic technologies due to its strong piezoelectric effect and availability in the form of crystalline thin films of high quality. However, at radio frequencies and cryogenic temperatures, these resonators are limited by the presence of decoherence and dephasing due to two-level systems. To mitigate these losses and increase device performance, a more detailed picture of the microscopic nature of these loss channels is needed. In this study, we fabricate several lithium niobate acoustic wave resonators and apply different processing steps that modify their surfaces. These treatments include argon ion sputtering, annealing, and acid cleans. We characterize the effects of these treatments using three surface-sensitive measurements: cryogenic microwave spectroscopy measuring density and coupling of TLS to mechanics, X-ray photoelectron spectroscopy and atomic force microscopy. We learn from these studies that, surprisingly, increases of TLS density may accompany apparent improvements in the surface quality as probed by the latter two approaches. Our work outlines the importance that surfaces and fabrication techniques play in altering acoustic resonator coherence, and suggests gaps in our understanding as well as approaches to address them.
Materials imperfections in Nb -based superconducting quantum circuits—in particular, two-level-system (TLS) defects—are a major source of decoherence, ultimately limiting the performance of quantum computation and sensing. Thus, identifying and understanding the microscopic origin of possible TLS defects in these devices will help develop strategies that eliminate them, which are key to superconducting qubit performance improvement. In this paper, we demonstrate an order-of-magnitude reduction in two-level system losses in three-dimensional superconducting radio frequency (SRF) niobium resonators by a 10-h high vacuum (HV) heat treatment at 650 °C, even after exposure to air and high-pressure rinsing (HPR). X-ray photoelectron spectroscopy (XPS) and high-resolution scanning transmission electron microscopy (STEM) reveal an alteration of the native oxide composition regrown after air exposure and HPR and the creation of nanoscale crystalline oxide regions, which correlates with the measured tenfold quality factor enhancement at low fields of the 1.3 GHz niobium resonator. Tunneling spectroscopy measurements show a pronounced proximity effect that further confirms the presence of metallic layers on the niobium surface.
The merits of thin-film surface acoustic wave (SAW) devices are pivotal to develop the high-performance intermodal acousto-optic modulators. In this work, we have proposed shear-horizontal (SH) SAW resonators for anticipated intermodal acousto-optic modulation on the thin-film lithium niobate platform. Through optimization of the cut angle of LN films, the SAW wavelength, and the thickness of interdigital transducer (IDT) electrodes, the calculated acousto-optic overlap factors utilizing SH0 modes are improved by more than an order of magnitude compared with those of Rayleigh modes. Furthermore, we have fabricated and characterized three kinds of proof-of-principle SH0 mode devices without/with grating reflectors. The electromechanical coupling coefficients (keff^2) and quality factors (Q) in the overtone resonators with grating reflectors are systematically evaluated, featuring the highest Q of 843 with the compromised keff^2 of 0.96%-4.72%. The results reveal that the temperature coefficients of frequency (TCF) of Rayleigh modes vary across various overtones, whereas the SH0 modes exhibit TCFs in the range of 32.3-68.9 ppm/C. Our fabricated SH0-mode overtone resonators demonstrate the capability of operating at power levels up to 29 dBm without electrode damage, offering a promising paradigm for robust and high-efficiency intermodal acousto-optic modulators with potential applications in integrated optical signal processing, microwave photonics,and quantum information technologies.
Piezoelectric nanomechanical resonators operating at gigahertz frequencies are a promising platform for quantum information processing and precision sensing, but phonon lifetimes have been limited to the microsecond range, widely attributed to the higher intrinsic loss of piezoelectric materials. Here we show that this limitation is not fundamental. Using a fabrication process informed by recent studies of defect-mediated loss in lithium niobate, we combine chemical restoration of ion-milled surfaces with a shadow-mask metallization process to produce lithium niobate phononic crystal resonators with inferred internal phonon lifetimes of up to 21 milliseconds at 3.6 gigahertz, corresponding to quality factors exceeding 4×1084\times10^84×108 (f⋅Qi>1018f\cdot Q_i > 10^{18}f⋅Qi​>1018) at millikelvin temperatures. By systematically varying the electrode-to-resonator spacing, we demonstrate that the measured lifetime is set by external coupling between the device and the measurement circuit rather than material loss. This establishes that lithium niobate, once fabrication-induced surface damage is removed, achieves an intrinsic quality comparable to the best mechanical materials while remaining an intrinsically piezoelectric platform with strong electromechanical coupling.
Thin-film lithium niobate (LN) has become an enabling platform in the development of quantum integrated circuits, for applications including microwave-to-optical converters and electromechanical transducers. Incorporation of high-quality planar superconducting resonators will further elevate the performance of these devices. However, alongside the desired interactions originated from LN, its piezoelectric nature also introduces parasitic coupling between microwave and phononic modes, resulting in excessive dielectric loss. In this work, we investigate such coupling by studying niobium nitride resonators directly deposited on patterned LN thin films. By varying device configuration, we pinpoint that overlapping electric field with LN can inadvertently excite bulk acoustic modes within the substrate, inducing microwave loss independent of the acoustic dissipation rate. The experimental results are supported by simulation and theoretical modeling. Our approach can be applied to different piezoelectric systems and provide insights into the design of microwave components for quantum transduction devices.
Surface-acoustic-wave (SAW) resonators are a promising platform for constructing hybrid quantum systems, where confined acoustic waves enable strong interaction with various physical systems. Focusing SAW resonators, reducing mode volume while suppressing diffraction losses, have recently been investigated for application in such hybrid systems. However, the resonator leads to additional transverse-mode resonances, which cause undesired responses. In this work, we develop focusing SAW resonators on a thin-film lithium niobate on sapphire. A film thinner than the SAW wavelength allows a highly confined acoustic-wave mode to be localized on the substrate surface. By using contoured electrodes following a two-dimensional Gaussian beam shape, we make the SAW mode focused to nearly a diffraction-limited and confirm it via optical imaging. Furthermore, by engineering the spatial mode overlap of the interdigital transducer electrodes, we suppress the excitation of higher-order transverse modes.
Abstract Quantum bits (qubits) with long coherence times are an important element for the implementation of medium- and large-scale quantum computers. In the case of superconducting planar qubits, understanding and improving qubits’ quality can be achieved by studying superconducting planar resonators. In this paper, we fabricate and characterize coplanar waveguide resonators made from aluminum thin films deposited on silicon substrates. We perform three different substrate surface treatments prior to aluminum deposition: one chemical treatment based on a hydrofluoric acid clean; one physical treatment consisting of a thermal annealing at 880 °C in high vacuum; and one combined treatment comprising both the chemical and the physical treatments. The aim of these treatments is to remove the two-level state (TLS) defects hosted by the native oxides residing at the various samples’ interfaces. We first characterize the fabricated samples through cross-sectional tunneling electron microscopy, acquiring electron energy loss spectroscopy maps of the samples’ cross sections. These measurements show that both the chemical and the physical treatments almost entirely remove native silicon oxide from the substrate surface and that their combination results in the cleanest interface. Additionally, we analyze the effects of the various substrate treatments on the roughness of the silicon surface by means of atomic force microscopy surface morphology mapping. We then study the quality of the resonators by means of microwave measurements in the ‘quantum regime’, i.e., at a temperature T ∼ 10 mK and at a mean microwave photon number 〈 n ph 〉 ∼ 1 . In this regime, we find that both surface treatments independently improve the resonator’s intrinsic quality factor by ≈172%. The highest quality factor is obtained for the combined treatment, Q i ≈ 0.82 million, corresponding to an improvement by ≈256%. Finally, we find that the TLS quality factor averaged over a time period of 3 h is ∼3 million at 〈 n ph 〉 ∼ 10 , indicating that substrate surface engineering can potentially reduce the TLS loss below other losses such as quasiparticle loss and flux noise.