Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2602.22567

Loss-insensitive quantum noise reduction in a Raman amplifier with coherent feedback

Jianmin Wang, Rong Zhu, Z. Y. Ou

quant-phSubmitted Feb 26, 2026• Announced Feb 27, 2026• 1 citation
arXivHTMLPDF

Abstract

A quantum amplifier usually adds extra noise inevitably through coupling to internal degrees of freedom while amplifying the signal. The introduction of quantum correlations can effectively suppress this extra noise. In this work, we utilize the established quantum correlation between the Stokes field and atomic spin waves in the Raman amplification process to feedback a portion of the Stokes field into the amplifier. This leads to a reduction in quantum noise that is independent of the feedback loss at high gain. A maximum of 6 dB noise reduction is observed. The single-path feedback amplifier is found to be sensitive to the feedback phase, a property that expands its potential for applications in quantum precision measurement, and the general concept can be extended to integrated optics and fiber optic systems.

Comments
14pages, 5 figures

Related papers

Observation of Quantum Noise Reduction in a Raman Amplifier via Quantum Correlation between Atom and Light

Jianmin Wang, Rong Zhu, Yue Li +1 more

Any amplifier requires coupling to its internal degrees of freedom for energy gain. This coupling introduces extra quantum noise to the output. On the other hand, if the internal degree of the amplifier can be accessed and manipulated, we can manage and even reduce the quantum noise of the amplifier's output. In this Letter, we present an experiment to reduce the quantum noise of a Raman amplifier by preparing the atomic medium in a correlated state with the Stokes light field. We report an observation of quantum noise reduction of more than 3.5 dB in the atomic Raman amplification process. From another perspective, the Raman amplifier at high gain in turn serves as a measurement tool for the quantum correlation between the atom and light. Furthermore, such a scheme, when viewed as a whole, also forms a quantum-entangled atom-light hybrid interferometer that can lead to quantum-enhanced sensors.

arXiv:2507.11890•Conference on Lasers and Electro-Optics•Nov 13, 2025•0 citations

Observation of Quantum Noise Suppression via Atom-Light Correlations in a Raman Amplifier

Rong Zhu, Jianmin Wang, Yue Li +1 more

We demonstrate 3.5 dB quantum-noise reduction in an atomic Raman amplifier by correlating the input Stokes field with a collective atomic spin wave. At high gain, the output noise also provides an all-optical measure of the atom-light quantum correlation. OCIS codes: 120.0120, 270.0270;

Conference on Lasers and Electro-Optics Pacific Rim (CLEO-PR)•Aug 1, 2026•0 citations

Cancellation of Internal Quantum Noise of an Amplifier by Quantum Correlation

Jia Kong, Florian Hudelist, Z. Y. Ou +1 more

Quantum noise is usually added in an amplification process through the internal degrees of the amplifier. Coupling the squeezed state to the internal degree can suppress the extra noise. Here, we demonstrate another method: when the internal degree of the amplifier is correlated with the input signal via quantum entanglement, quantum destructive interference between the input and the internal degree may result in noise reduction at the amplified output. We achieve a quantum noise reduction of 2.3 dB at the output and an improvement of 4.0±0.2 dB in signal-to-noise ratio during the amplification process with a quantum noise gain of 4.5 dB.

Physical Review Letters•Jul 18, 2013•52 citations

Quantum noise reduction in optical amplification

Z. Y. Ou, Silvania F. Pereira, Harry J. Kimble

Quantum fluctuations in optical amplification are investigated with a nondegenerate optical parametric amplifier whose internal idler mode is coupled to a squeezed vacuum. Reductions of the inherent quantum noise of the amplifier are observed with a minimum noise level 0.7 dB below the usual noise level of the amplifier with its internal idler mode in a vacuum state. With a small coherent field as the signal input, the amplified output exhibits an improvement in signal-to-noise ratio of 0.5 dB for the case of a squeezed-vacuum as compared to a vacuum state for the amplifier's internal mode.

Physical Review Letters•May 24, 1993•98 citations

Efficient phase-sensitive compensation in lossy interferometry using optical amplification

Tingting Jiang, Jie Zhao, Feiyu Yao +5 more

Optical interferometers, as precision measurement tools, inevitably experience optical path losses in practical applications, which introduce unavoidable vacuum noise and reduce the sensitivity in the phase estimation. To mitigate the effects of losses on sensitivity, we propose an enhanced interferometer scheme that integrates a Raman amplifier. This amplifier is strategically positioned within the lossy interference arm to counteract the reduction in phase sensitivity caused by losses. Our research highlights the crucial role of amplifier positioning, revealing that pre-amplification (PRA, placing the amplifier before the lossy section) significantly outperforms post-amplification (POA, placing the amplifier after the lossy section). PRA effectively enhances sensitivity by increasing the number of phase-sensitive particles and minimizing noise amplification. As the loss increases, the superiority of PRA in mitigating loss effects becomes increasingly evident. To validate our approach, we conducted experimental demonstrations. When the losses reach 90%, PRA experimentally achieves a sensitivity improvement of 4.6 dB compared with the case of only loss without the amplifier, equivalent to increasing the input laser power by over 8 times. PRA can effectively improve the robustness against losses for the practical application solely through the use of a coherent amplifier, with a simple technical implementation yet remarkable enhancement effects. We believe that current PRA-enhanced interferometry facilitates the practical implementation of phase measurement in environments characterized by significant loss.

Optics Express•Apr 2, 2025•2 citations

Reduction of quantum noise in optical parametric amplification

Juan Ariel Levenson, Philippe Grangier, Izo I. Abram +1 more

We experimentally demonstrate that a type-II pulsed optical parametric amplifier operated in a phase-insensitive configuration works as a near-perfect classical optical amplifier whose noise figure approaches 3 dB at high gains. We further demonstrate that, when operated in a phase-sensitive configuration, this amplifier works as a quantum-optical amplifier whose noise figure goes below 3 dB and approaches 0 dB at high gains. The noise figure of 1.45 ± 0.2 dB, measured for a gain of 9 dB, is clearly in the quantum regime.

Journal of the Optical Society of America B•Nov 1, 1993•168 citations
A quantum amplifier usually adds extra noise inevitably through coupling to internal degrees of freedom while amplifying the signal. The introduction of quantum correlations can effectively suppress this extra noise. In this work, we utilize the established quantum correlation between the Stokes field and atomic spin waves in the Raman amplification process to feedback a portion of the Stokes field into the amplifier. This leads to a reduction in quantum noise that is independent of the feedback loss at high gain. A maximum of 6 dB noise reduction is observed. The single-path feedback amplifier is found to be sensitive to the feedback phase, a property that expands its potential for applications in quantum precision measurement, and the general concept can be extended to integrated optics and fiber optic systems.
Any amplifier requires coupling to its internal degrees of freedom for energy gain. This coupling introduces extra quantum noise to the output. On the other hand, if the internal degree of the amplifier can be accessed and manipulated, we can manage and even reduce the quantum noise of the amplifier's output. In this Letter, we present an experiment to reduce the quantum noise of a Raman amplifier by preparing the atomic medium in a correlated state with the Stokes light field. We report an observation of quantum noise reduction of more than 3.5 dB in the atomic Raman amplification process. From another perspective, the Raman amplifier at high gain in turn serves as a measurement tool for the quantum correlation between the atom and light. Furthermore, such a scheme, when viewed as a whole, also forms a quantum-entangled atom-light hybrid interferometer that can lead to quantum-enhanced sensors.
Quantum noise is usually added in an amplification process through the internal degrees of the amplifier. Coupling the squeezed state to the internal degree can suppress the extra noise. Here, we demonstrate another method: when the internal degree of the amplifier is correlated with the input signal via quantum entanglement, quantum destructive interference between the input and the internal degree may result in noise reduction at the amplified output. We achieve a quantum noise reduction of 2.3 dB at the output and an improvement of 4.0±0.2 dB in signal-to-noise ratio during the amplification process with a quantum noise gain of 4.5 dB.
Quantum fluctuations in optical amplification are investigated with a nondegenerate optical parametric amplifier whose internal idler mode is coupled to a squeezed vacuum. Reductions of the inherent quantum noise of the amplifier are observed with a minimum noise level 0.7 dB below the usual noise level of the amplifier with its internal idler mode in a vacuum state. With a small coherent field as the signal input, the amplified output exhibits an improvement in signal-to-noise ratio of 0.5 dB for the case of a squeezed-vacuum as compared to a vacuum state for the amplifier's internal mode.
Optical interferometers, as precision measurement tools, inevitably experience optical path losses in practical applications, which introduce unavoidable vacuum noise and reduce the sensitivity in the phase estimation. To mitigate the effects of losses on sensitivity, we propose an enhanced interferometer scheme that integrates a Raman amplifier. This amplifier is strategically positioned within the lossy interference arm to counteract the reduction in phase sensitivity caused by losses. Our research highlights the crucial role of amplifier positioning, revealing that pre-amplification (PRA, placing the amplifier before the lossy section) significantly outperforms post-amplification (POA, placing the amplifier after the lossy section). PRA effectively enhances sensitivity by increasing the number of phase-sensitive particles and minimizing noise amplification. As the loss increases, the superiority of PRA in mitigating loss effects becomes increasingly evident. To validate our approach, we conducted experimental demonstrations. When the losses reach 90%, PRA experimentally achieves a sensitivity improvement of 4.6 dB compared with the case of only loss without the amplifier, equivalent to increasing the input laser power by over 8 times. PRA can effectively improve the robustness against losses for the practical application solely through the use of a coherent amplifier, with a simple technical implementation yet remarkable enhancement effects. We believe that current PRA-enhanced interferometry facilitates the practical implementation of phase measurement in environments characterized by significant loss.
We experimentally demonstrate that a type-II pulsed optical parametric amplifier operated in a phase-insensitive configuration works as a near-perfect classical optical amplifier whose noise figure approaches 3 dB at high gains. We further demonstrate that, when operated in a phase-sensitive configuration, this amplifier works as a quantum-optical amplifier whose noise figure goes below 3 dB and approaches 0 dB at high gains. The noise figure of 1.45 ± 0.2 dB, measured for a gain of 9 dB, is clearly in the quantum regime.