Error mitigation (EM) methods are crucial for obtaining reliable results in the realm of noisy intermediate-scale quantum (NISQ) computers, where noise significantly impacts output accuracy. Some EM protocols are particularly efficient for specific types of noise. Yet the noise in the actual hardware may not align with that. In this article, we introduce Noise Tailoring (NT) -- an innovative strategy designed to modify the structure of the noise associated with two-qubit gates through statistical sampling. We perform classical emulation of the protocol behavior and find that the NT+EM results can be up to 5 times more accurate than the results of EM alone for realistic Pauli noise acting on two-qubit gates. At the same time, on actual IBM quantum computers, the NT method falls victim to various small error sources beyond Markovian Pauli noise. We propose to use the NT method for characterizing such error sources on quantum computers in order to inform hardware development.
Error mitigation (EM) methods are crucial for obtaining reliable results in the realm of noisy intermediate-scale quantum (NISQ) computers, where noise significantly impacts output accuracy. Some EM protocols are particularly efficient for specific types of noise. Yet the noise in the actual hardware may not align with that. In this article, we introduce Noise Tailoring (NT) -- an innovative strategy designed to modify the structure of the noise associated with two-qubit gates through statistical sampling. We perform classical emulation of the protocol behavior and find that the NT+EM results can be up to 5 times more accurate than the results of EM alone for realistic Pauli noise acting on two-qubit gates. At the same time, on actual IBM quantum computers, the NT method falls victim to various small error sources beyond Markovian Pauli noise. We propose to use the NT method for characterizing such error sources on quantum computers in order to inform hardware development.
Quantum error mitigation (QEM) is vital for noisy intermediate-scale quantum (NISQ) devices. While most conventional QEM schemes assume discrete gate-based circuits with noise appearing either before or after each gate, the assumptions are inappropriate for describing realistic noise that may have strong gate dependence and complicated nonlocal effects, and general computing models such as analog quantum simulators. To address these challenges, we first extend the scenario, where each computation process, being either digital or analog, is described by a continuous time evolution. For noise from imperfections of the engineered Hamiltonian or additional noise operators, we show it can be effectively suppressed by a stochastic QEM method. Since our method assumes only accurate single qubit controls, it is applicable to all digital quantum computers and various analog simulators. Meanwhile, errors in the mitigation procedure can be suppressed by leveraging the Richardson extrapolation method. As we numerically test our method with various Hamiltonians under energy relaxation and dephasing noise and digital quantum circuits with additional two-qubit crosstalk, we show an improvement of simulation accuracy by 2 orders. We assess the resource cost of our scheme and conclude the feasibility of accurate quantum computing with NISQ devices.
In the noisy intermediate-scale quantum (NISQ) era, quantum error mitigation (QEM) is essential for producing reliable outputs from quantum circuits. We present a statistical signal processing approach to QEM that estimates the most likely noiseless outputs from noisy quantum measurements. Our model assumes that circuit depth is sufficient for depolarizing noise, producing corrupted observations that resemble a uniform distribution alongside classical bit-flip errors from readout. Our method consists of two steps: a filtering stage that discards uninformative depolarizing noise and an expectation-maximization (EM) algorithm that computes a maximum likelihood (ML) estimate over the remaining data. We demonstrate the effectiveness of this approach on small-qubit systems using circuit simulations in Qiskit and IBM quantum processing unit (QPU) data, and compare its performance to contemporary statistical QEM techniques. We also show that our method scales to larger qubit counts using synthetically generated data consistent with our noise model. These results suggest that principled statistical methods can offer scalable and interpretable solutions for quantum error mitigation in realistic NISQ settings.
Quantum computing is entering a transitional regime between noisy intermediate-scale quantum (NISQ) processing and early fault-tolerant quantum computation (FTQC), in which increasingly capable hardware is beginning to support repeated syndrome measurements, partial error correction, and logical-qubit operations, while residual physical and logical errors remain non-negligible. In this regime, error suppression, error mitigation, and quantum error correction are increasingly better viewed as complementary layers of a unified error-reduction strategy rather than as separate approaches, with each acting at a different stage of the quantum computation to improve simulation reliability. Thus, in this review, we provide a practical and forward-looking overview of the principal hardware error sources and the corresponding error suppression and mitigation methods for reducing their impact across the current NISQ-FTQC transition. We discuss hardware-aware circuit design, coherent-error suppression, readout mitigation, noise extrapolation, classical inference, and software-supported workflows, with particular emphasis on their implementation on actual quantum processors. We further examine how error mitigation techniques can be adapted to encoded and logical-qubit settings so that they can operate alongside quantum error correction to suppress residual logical errors and improve the accuracy of computation in the early fault-tolerant regime.
Abstract Accurately characterizing and mitigating the impact of noise is essential for improving the fidelity of quantum simulations on Noisy Intermediate-Scale Quantum (NISQ) devices. In this work, we introduce a circuit-structure-preserving error-mitigation framework designed for parameterized quantum circuits. Unlike conventional approaches that alter circuit topology or require heavy post-processing, our method preserves the native architecture while systematically diagnosing gate noise. This structure-preserving feature enables robust, high-fidelity simulations even in the presence of significant hardware noise, making the approach particularly effective for small-scale circuits executed at high sampling rates, such as those used in variational algorithms and quantum neural networks. To benchmark its performance, we apply the method to variational quantum simulations of a non-Hermitian ferromagnetic transverse-field Ising chain implemented on IBM Quantum processors. The mitigated results exhibit excellent agreement with exact theoretical predictions across a wide range of noise conditions. Thus, our framework provides a scalable and hardware-efficient strategy for the current hardware.
Abstract The practical application of Noisy Intermediate-Scale Quantum (NISQ) hardware is fundamentally limited by gate-level noise, which corrupts computational results. This research addresses this challenge through the development and validation of a modular software framework for Quantum Error Mitigation (QEM). We implement and compare two leading QEM strategies: Zero-Noise Extrapolation (ZNE) and Probabilistic Error Cancellation (PEC). The framework is built using the Qiskit library and is validated using a realistic, hardware-calibrated noisy simulator that mimics the error characteristics of a real IBM Quantum device. Our methodology focuses on a robust implementation of ZNE via unitary folding and a proof-of-concept demonstration of the PEC algorithm. The framework's effectiveness is demonstrated on a simulated noisy backend where, for a 3-qubit Greenberger-Horne-Zeilinger (GHZ) state, the baseline state fidelity was increased from 93.5% to 97.3% via ZNE, corresponding to a 59% reduction in the state's infidelity. This work provides a practical demonstration of how software-based error mitigation can enhance the reliability of quantum computations on current noisy hardware.
Quantum computers have enabled solving problems beyond the current machines' capabilities. However, this requires handling noise arising from unwanted interactions in these systems. Several protocols have been proposed to address efficient and accurate quantum noise profiling and mitigation. In this work, we propose a novel protocol that efficiently estimates the average output of a noisy quantum device to be used for quantum noise mitigation. The multi-qubit system average behavior is approximated as a special form of a Pauli Channel where Clifford gates are used to estimate the average output for circuits of different depths. The characterized Pauli channel error rates, and state preparation and measurement errors are then used to construct the outputs for different depths thereby eliminating the need for large simulations and enabling efficient mitigation. We demonstrate the efficiency of the proposed protocol on four IBM Q 5-qubit quantum devices. Our method demonstrates improved accuracy with efficient noise characterization. We report up to 88% and 69% improvement for the proposed approach compared to the unmitigated, and pure measurement error mitigation approaches, respectively.