Quantum computers have enabled solving problems beyond the current machines' capabilities. However, this requires handling noise arising from unwanted interactions in these systems. Several protocols have been proposed to address efficient and accurate quantum noise profiling and mitigation. In this work, we propose a novel protocol that efficiently estimates the average output of a noisy quantum device to be used for quantum noise mitigation. The multi-qubit system average behavior is approximated as a special form of a Pauli Channel where Clifford gates are used to estimate the average output for circuits of different depths. The characterized Pauli channel error rates, and state preparation and measurement errors are then used to construct the outputs for different depths thereby eliminating the need for large simulations and enabling efficient mitigation. We demonstrate the efficiency of the proposed protocol on four IBM Q 5-qubit quantum devices. Our method demonstrates improved accuracy with efficient noise characterization. We report up to 88% and 69% improvement for the proposed approach compared to the unmitigated, and pure measurement error mitigation approaches, respectively.
Quantum computers have enabled solving problems beyond the current machines' capabilities. However, this requires handling noise arising from unwanted interactions in these systems. Several protocols have been proposed to address efficient and accurate quantum noise profiling and mitigation. In this work, we propose a novel protocol that efficiently estimates the average output of a noisy quantum device to be used for quantum noise mitigation. The multi-qubit system average behavior is approximated as a special form of a Pauli Channel where Clifford gates are used to estimate the average output for circuits of different depths. The characterized Pauli channel error rates, and state preparation and measurement errors are then used to construct the outputs for different depths thereby eliminating the need for large simulations and enabling efficient mitigation. We demonstrate the efficiency of the proposed protocol on four IBM Q 5-qubit quantum devices. Our method demonstrates improved accuracy with efficient noise characterization. We report up to 88% and 69% improvement for the proposed approach compared to the unmitigated, and pure measurement error mitigation approaches, respectively.
Using near-term quantum computers to achieve a quantum advantage requires efficient strategies to improve the performance of the noisy quantum devices presently available. We develop and experimentally validate two efficient error mitigation protocols named ``Noiseless Output Extrapolation" and ``Pauli Error Cancellation" that can drastically enhance the performance of quantum circuits composed of noisy cycles of gates. By combining popular mitigation strategies such as probabilistic error cancellation and noise amplification with efficient noise reconstruction methods, our protocols can mitigate a wide range of noise processes that do not satisfy the assumptions underlying existing mitigation protocols, including non-local and gate-dependent processes. We test our protocols on a four-qubit superconducting processor at the Advanced Quantum Testbed. We observe significant improvements in the performance of both structured and random circuits, with up to 86% improvement in variation distance over the unmitigated outputs. Our experiments demonstrate the effectiveness of our protocols, as well as their practicality for current hardware platforms.
Achieving near-term quantum advantage will require accurate estimation of quantum observables despite significant hardware noise. For this purpose, we propose a novel, scalable error-mitigation method that applies to gate-based quantum computers. The method generates training data { X i noisy , X i exact } via quantum circuits composed largely of Clifford gates, which can be efficiently simulated classically, where X i noisy and X i exact are noisy and noiseless observables respectively. Fitting a linear ansatz to this data then allows for the prediction of noise-free observables for arbitrary circuits. We analyze the performance of our method versus the number of qubits, circuit depth, and number of non-Clifford gates. We obtain an order-of-magnitude error reduction for a ground-state energy problem on 16 qubits in an IBMQ quantum computer and on a 64-qubit noisy simulator.
Accurately estimating observables on noisy quantum devices remains a central challenge for near-term quantum algorithms. While quantum error mitigation techniques can reduce noise-induced bias, they often rely on unverifiable assumptions about the circuit noise, and cannot guarantee the magnitude of residual bias error. Here, rather than using classical resources to mitigate a noisy quantum circuit execution, we propose a hybrid algorithm that uses quantum resources to improve the accuracy of approximate classical Pauli-path simulation. Our protocol, Quantum Enhanced Pauli Propagation (QuEPP), uses Clifford perturbation theory (CPT) to construct a classically simulable ensemble of Clifford circuits from the low-order terms in CPT, which directly provide the approximate classical Pauli-path simulation of the target circuit. Noisy quantum expectation values of this ensemble are then used to infer a global rescaling factor that corrects quantum execution of the target circuit, providing higher-order contributions absent from the truncated low-order classical simulation. This approach requires no noise characterization, applies to arbitrary circuits, and provides a provable route to asymptotically unbiased estimates. Using IBM Heron hardware, we demonstrate QuEPP on 2D random mirror circuits of up to 49 qubits and circuit depth 80, as well as Trotterized Hamiltonian evolution, showing consistent improvements beyond classical CPT and unmitigated quantum results. QuEPP offers a simple, scalable, and model-free framework for enabling accurate quantum computation in the pre-fault-tolerant era.
A significant problem for current quantum computers is noise. While there are many distinct noise channels, the depolarizing noise model often appropriately describes average noise for large circuits involving many qubits and gates. We present a method to mitigate the depolarizing noise by first estimating its rate with a noise-estimation circuit and then correcting the output of the target circuit using the estimated rate. The method is experimentally validated on a simulation of the Heisenberg model. We find that our approach in combination with readout-error correction, randomized compiling, and zero-noise extrapolation produces close to exact results even for circuits containing hundreds of CNOT gates. We also show analytically that zero-noise extrapolation is improved when it is applied to the output of our method.
Quantum error mitigation techniques mimic noiseless quantum circuits by running several related noisy circuits and combining their outputs in particular ways. How well such techniques work is thought to depend strongly on how noisy the underlying gates are. Weakly-entangling gates, like R Z Z ( θ ) for small angles θ , can be much less noisy than entangling Clifford gates, like CNOT and CZ, and they arise naturally in circuits used to simulate quantum dynamics. However, such weakly-entangling gates are non-Clifford, and are therefore incompatible with two of the most prominent error mitigation techniques to date: probabilistic error cancellation (PEC) and the related form of zero-noise extrapolation (ZNE). This paper generalizes these techniques to non-Clifford gates, and comprises two complementary parts. The first part shows how to effectively transform any given quantum channel into (almost) any desired channel, at the cost of a sampling overhead, by adding random Pauli gates and processing the measurement outcomes. This enables us to cancel or properly amplify noise in non-Clifford gates, provided we can first characterize such gates in detail. The second part therefore introduces techniques to do so for noisy R Z Z ( θ ) gates. These techniques are robust to state preparation and measurement (SPAM) errors, and exhibit concentration and sensitivity—crucial statistical properties for many experiments. They are related to randomized benchmarking, and may also be of interest beyond the context of error mitigation. We find that while non-Clifford gates can be less noisy than related Cliffords, their noise is fundamentally more complex, which can lead to surprising and sometimes unwanted effects in error mitigation. Whether this trade-off can be broadly advantageous remains to be seen.
As quantum devices continue to improve in scale and precision, a central challenge is how to effectively utilize noisy hardware for meaningful computation. Most existing approaches aim to recover noiseless circuit outputs from noisy ones through error mitigation or correction. Here, we show that noisy quantum devices can be directly leveraged as computational resources to enhance the classical simulation of quantum circuits. We introduce the Noisy-device-enhanced Classical Simulation (NDE-CS) protocol, which improves stabilizer-based classical Monte Carlo simulation methods by incorporating data obtained from noisy quantum hardware. Specifically, NDE-CS uses noisy executions of a target circuit together with noisy Clifford circuits to learn how the target circuit can be expressed in terms of Clifford circuits under realistic noise. The same learned relation can then be reused in the noiseless Clifford limit, enabling accurate estimation of ideal expectation values with substantially reduced sampling cost. Numerical simulations on Trotterized Ising circuits demonstrate that NDE-CS achieves orders-of-magnitude reductions in sampling cost compared to the underlying purely classical Monte Carlo approaches from which it is derived, while maintaining the same accuracy. We also compare NDE-CS with Sparse Pauli Dynamics (SPD), a powerful classical framework capable of simulating quantum circuits at previously inaccessible scales, and provide an example where the cost of SPD scales exponentially with system size, while NDE-CS scales much more favorably. These results establish NDE-CS as a scalable hybrid simulation approach for quantum circuits, where noise can be harnessed as a computational asset.