The question of the energetic efficiency of quantum computers has gained increasing attention recently. A precise understanding of the resources required to operate a quantum computer with a targeted computational performance and how the energy requirements can impact the scalability is still missing. In this work, one implementation of the quantum Fourier transform algorithm in a trapped-ion setup was studied. The main focus was to obtain a theoretical characterization of the energetic costs of quantum computation, based on actual experimental measurements performed on a similar trapped-ion setup.The energetic cost of the computation was estimated by analyzing the components of the setup and all the steps involved, from the cooling and preparation of the ions to the execution of the algorithm and readout of the result. In the Noisy Intermediate-Scale Quantum regime, a potential scaling of the energetic costs was argued and used to find a possible threshold for an energetic quantum advantage against state-of-the-art classical supercomputers. Remarkably, this threshold appears to be lower than the one for which computational time advantage is expected.
Semiconductor spin qubits offer a promising route to compact and scalable quantum computers, combining long coherence times in isotopically purified silicon with compatibility with semiconductor manufacturing. Beyond computational speedup, their energy efficiency is an important consideration for future large-scale systems. We evaluate the power and energy requirements of a Loss-DiVincenzo spin-qubit quantum computer by analyzing the Quantum Fourier Transform (QFT) and benchmarking it against the classical Fast Fourier Transform (FFT). We develop a detailed energy budget, identifying cryogenic cooling as the dominant baseline contribution before quantum error correction (QEC). The comparison between the QFT and the classical FFT reveals that, for any quantum workload operating under a polynomially bounded sampling regime, the crossover in energy consumption occurs at smaller problem sizes than the crossover in execution time. Thus, quantum computing can become energetically competitive before achieving a speedup in execution time. We then incorporate surface-code QEC and analyze the energy costs of QEC cycles, gate synthesis, and decoding. At scale, instrumentation and decoding become dominant contributions, while cryogenic cooling imposes a constraint on scalability. We show that optimizing the control-signal demultiplexing ratio can reduce the overall energy cost by approximately two orders of magnitude. For a system with about one million physical qubits, we estimate a power consumption of approximately 100 kW, at least one order of magnitude below that of today's highest-performance classical computing systems.
Quantum computers are emerging as a promising new technology due to their ability to solve complex problems that exceed the capabilities of classical systems in terms of time. Among various implementations, superconducting qubits have become the leading technology due to their scalability and compatibility with quantum error correction mechanisms. Although time has traditionally been the primary focus, energetic efficiency is becoming an increasingly important consideration, especially with the possibility of a quantum energetic advantage. In this article, the energy consumption of the Semiclassical Quantum Fourier Transform was analyzed on a superconducting quantum computing platform based on cat qubits. Quantum error correction mechanisms were studied and considered in the energy estimations. The results show how the energy consumption scales with the number of qubits and how the most relevant parameters required for qubit stabilization, gate implementation, and error correction codes contribute to the overall energy usage. An optimization method was developed to tune these parameters with the goal of minimizing energy consumption while maintaining qubit fidelities above a given threshold. Additionally, a comparative study with state-of-the-art classical computers indicates a potential quantum energetic advantage for systems with more than 26 qubits, assuming cryogenic systems operating at Carnot efficiency, with this energetic advantage arising before any computational advantage. This behavior persists even when realistic cryogenic systems and control electronics are taken into account.
Neutral-atom arrays have recently emerged as a promising platform for quantum information processing.One important remaining roadblock for the large-scale application of these systems is the ability to perform error-corrected quantum operations.To entangle the qubits in these systems, atoms are typically excited to Rydberg states, which could decay or give rise to various correlated errors that cannot be addressed directly through traditional methods of fault-tolerant quantum computation.In this work, we provide the first complete characterization of these sources of error in a neutral-atom quantum computer and propose hardware-efficient, fault-tolerant quantum computation schemes that mitigate them.Notably, we develop a novel and distinctly efficient method to address the most important errors associated with the decay of atomic qubits to states outside of the computational subspace.These advances allow us to significantly reduce the resource cost for fault-tolerant quantum computation compared to existing, general-purpose schemes.Our protocols can be implemented in the near term using state-of-the-art neutral-atom platforms with qubits encoded in both alkali and alkaline-earth atoms.
The power of quantum computation derives from algorithmic methods that exploit the availability of quantum superposition and entanglement to perform computations that are intractable with classical devices. The race is on to develop hardware that will unleash the promise of quantum algorithms. A handful of different types of hardware are currently being developed with the greatest efforts directed at superconducting, quantum-dot, trapped-ion, photonic, and neutral-atom approaches [1]. While all approaches have strengths and weaknesses, and are at different stages of development, the challenge of creating a practical design that can be scaled to a million or more qubits has not yet been met with any of the existing platforms. One may wonder if we really need a million qubits for a useful quantum computer. The answer depends on our ambition level. On the one hand it is widely believed that a quantum computer with less than 100 reliable qubits will be able to demonstrate a quantum advantage for a well defined computational problem [2]. Demonstration of a quantum computational advantage will generate great excitement in the halls of academia, but will have little broader import. A problem of great practical interest such as ab initio design of chemicals for increasing the yield of fertilizers for crop production, to name but one example, may also require just a few hundred qubits, provided computational sequences with circuit depth of 1010 or more operations can be reliably performed [3]. However, given the current performance of qubit hardware, which has demonstrated error rates not less than ∼10−3, computations with depth 1010 will only produce random outcomes of negligible value. The solution lies in the construction of error-correction circuitry operating on logical qubits, each composed of many physical qubits, which will enable logical error rates many orders of magnitude smaller than physical error rates. Although error correction is remarkably efficient for classical computing devices—Hamming codes detect and correct errors while only requiring roughly 10% overhead in the number of physical bits—quantum error correction is notoriously expensive. New approaches to error correction are the subject of intensive research with one promising direction being the development of codes that are optimized to suppress the dominant error mechanism in a particular physical platform [4,5]. Nevertheless, with physical error rates of 10−4, a plausible target for current qubit systems, the overhead required to reach logical error rates of 10−10 may be measured in thousands of physical qubits for each logical qubit. Thus a quantum computer able to perform deep calculations on a few hundred logical qubits could require a million physical qubits. A consequence of the cost of quantum error correction is that any viable approach to large-scale quantum computing needs to combine high-fidelity quantum logic operations with a capability for integrating large numbers of physical qubits. From this perspective neutral-atom qubits appear particularly promising [6] as they have already demonstrated control of more qubits than any other platform with recent experiments in 1D [7], 2D [8,9], and 3D [10] geometries showing control of up to 50 atomic qubits. Large qubit arrays can potentially be prepared in 1D, 2D, or 3D geometries. The number of proximal qubits increases with the dimensionality, which is advantageous for implementation of error correction code words, and points towards a preference for 2D or 3D arrays. On the other hand, the added overhead of compensating crosstalk incurred when targeting atoms inside a 3D volume makes parallel operations on multiple qubits challenging. A 2D geometry, as shown schematically in Fig. 1, may be an optimal choice since qubit control and measurement can be performed with lasers propagating normal to the plane of the array so that individual qubit sites can be addressed independently. With demonstrated array periods of a few micrometers we require a footprint of less than 1 mm2 for 104 qubits. Conceptual picture of a 2D neutral-atom qubit array. a) High-numerical-aperture lenses project several different wavelengths of light for control and measurement of the qubits. Specific choices of optical wavelengths depend on the atomic species. Not shown are optics for initial laser cooling, transport to the array, beam scanning, and imaging for qubit measurement. b) Averaged fluorescence image of 49 atomic qubits on a 2D grid with |
3.8μm| spacing [8]. From a fundamental perspective the prospects for scaling neutral-atom systems are particularly promising due to the exceptionally large ratio between coherent and incoherent coupling rates. Neutral-atom qubits are encoded in hyperfine ground states for which coherence times of the order of 10 s have been demonstrated [10]. This implies a dephasing rate |
γ∼0.1s−1|. The coherent coupling that enables quantum logic operations is switched on by exciting atoms to high-lying Rydberg states with principal quantum number close to 100 [11,12]. Rydberg excited atoms at spacings of a few micrometers in an optical lattice interact coherently with rates |
g>109s−1|. The ratio between desired coherent coupling and residual incoherent dephasing of g/γ ∼ 1010 establishes a figure of merit that is enabling for scalability. To our knowledge only trapped ions can claim a similar g/γ ratio [13], but without a correspondingly direct path towards controlling thousands of qubits in a single processing unit. Although the g/γ ratio is exceptionally favorable for neutral-atom qubits a complete set of universal gate operations has not yet been demonstrated with high fidelity. Single-qubit gates in large 2D and 3D arrays have reached fidelity |
F∼0.999| [8,10]. However, the highest demonstrated fidelity for two-qubit entanglement mediated by Rydberg-state interactions is |
F<0.8| [6,14,15], a value that is well short of the theoretical limit of |
F>0.9999| [16,17]. There is healthy optimism within the research community working with neutral-atom qubits that combining improved laser sources with reduced noise, better cooling to reduce motional dephasing, and control of stray electric fields that perturb Rydberg atoms will lead to substantially improved gate fidelity in the near future. Recent results with better filtering of laser phase noise have already demonstrated remarkable improvement in ground–Rydberg entanglement [18]. The outlook for the next few years appears very promising. We anticipate that with advances in lasers, optical lattices for atom trapping, deterministic rearrangement and loading of atoms in multi-dimensional arrays [19,20], and optics for fast beam scanning it will be possible to increase the number of physical qubits in a single neutral-atom module to at least 104. A challenging yet plausible path to a million-qubit processor can then be contemplated by connecting 100 such modules with atom–photon entanglement channels [21]. Beyond the potential for advancing the state of the art in computation, development of techniques for single-atom control inside large multi-atom arrays will enable other applications of quantum science including metrology and time-keeping. Rydberg interactions that are at the heart of a neutral-atom quantum computer may lead to multi-atom entanglement and Heisenberg scaling of atomic-clock precision [22]. This work was supported by the NSF and ARL CDQI.
How much energy does a quantum computer consume? Are they more efficient than their classical counterparts? In this work, we make a step towards answering these questions. We define the energy efficiency of a quantum computer as the ratio of the number of algorithms it can perform during a given time over the energy consumed by the hardware during this time. We analyze the most representative physical platforms currently envisioned to be used as building blocks of quantum computers: superconducting qubits, silicon spin qubits, trapped ions, neutral atoms and photonic qubits. Including insights from experts in all these technologies and taking into account algorithm compilation constraints, we discuss the advantages and inconveniences of each platform from an energy standpoint. Beyond providing concrete values of the energy consumption of current quantum computers, we lay the foundation of a framework to benchmark the energy efficiency of any future quantum computing architecture.