Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2510.19794 · Physical Review X

Passive Quantum Error Correction of Photon Loss at Breakeven

Shruti Shirol, Sean van Geldern, Hanzhe Xi, Chen Wang

Published Mar 3, 2026• 7 citations
arXivHTMLPDF

Abstract

Physical qubits in a quantum computer are often represented by superposition states of single particles or excitations. Decay of the excitation itself is a fundamental error channel that is difficult to overcome via external drive or control techniques. Quantum error correcting codes, which encode information in superpositions involving multiple excitations, provide a path to preserve information beyond the capacity of individual excitations, but typically require exquisite active operations on the system. Here, we demonstrate a steady-state driven-dissipative quantum system, composed of a superconducting cavity and a transmon ancilla, that preserves a logical qubit beyond the photon-lifetime limit by about 5% using a binomial encoding. This realization of continuous quantum error correction at the breakeven point highlights the quantitative competitiveness of passive correction strategies, while circumventing some demanding hardware requirements of its active counterparts.

DOI
10.1103/nvbm-97vs

Related papers

Demonstrating Quantum Error Correction that Extends the Lifetime of Quantum Information

Nissim Ofek, Andrei Petrenko, Reinier Heeres +10 more

The remarkable discovery of Quantum Error Correction (QEC), which can overcome the errors experienced by a bit of quantum information (qubit), was a critical advance that gives hope for eventually realizing practical quantum computers. In principle, a system that implements QEC can actually pass a "break-even" point and preserve quantum information for longer than the lifetime of its constituent parts. Reaching the break-even point, however, has thus far remained an outstanding and challenging goal. Several previous works have demonstrated elements of QEC in NMR, ions, nitrogen vacancy (NV) centers, photons, and superconducting transmons. However, these works primarily illustrate the signatures or scaling properties of QEC codes rather than test the capacity of the system to extend the lifetime of quantum information over time. Here we demonstrate a QEC system that reaches the break-even point by suppressing the natural errors due to energy loss for a qubit logically encoded in superpositions of coherent states, or cat states of a superconducting resonator. Moreover, the experiment implements a full QEC protocol by using real-time feedback to encode, monitor naturally occurring errors, decode, and correct. As measured by full process tomography, the enhanced lifetime of the encoded information is 320 microseconds without any post-selection. This is 20 times greater than that of the system's transmon, over twice as long as an uncorrected logical encoding, and 10% longer than the highest quality element of the system (the resonator's 0, 1 Fock states). Our results illustrate the power of novel, hardware efficient qubit encodings over traditional QEC schemes. Furthermore, they advance the field of experimental error correction from confirming the basic concepts to exploring the metrics that drive system performance and the challenges in implementing a fault-tolerant system.

arXiv:1602.04768•Feb 15, 2016•41 citations

Beating the break-even point with a discrete-variable-encoded logical qubit

Zhongchu Ni, Sai Li, Xiaowei Deng +12 more

Abstract Quantum error correction (QEC) aims to protect logical qubits from noises by using the redundancy of a large Hilbert space, which allows errors to be detected and corrected in real time 1 . In most QEC codes 2–8 , a logical qubit is encoded in some discrete variables, for example photon numbers, so that the encoded quantum information can be unambiguously extracted after processing. Over the past decade, repetitive QEC has been demonstrated with various discrete-variable-encoded scenarios 9–17 . However, extending the lifetimes of thus-encoded logical qubits beyond the best available physical qubit still remains elusive, which represents a break-even point for judging the practical usefulness of QEC. Here we demonstrate a QEC procedure in a circuit quantum electrodynamics architecture 18 , where the logical qubit is binomially encoded in photon-number states of a microwave cavity 8 , dispersively coupled to an auxiliary superconducting qubit. By applying a pulse featuring a tailored frequency comb to the auxiliary qubit, we can repetitively extract the error syndrome with high fidelity and perform error correction with feedback control accordingly, thereby exceeding the break-even point by about 16% lifetime enhancement. Our work illustrates the potential of hardware-efficient discrete-variable encodings for fault-tolerant quantum computation 19 .

arXiv:2211.09319•Nature•Mar 22, 2023•206 citations

Autonomous error correction of a single logical qubit using two transmons

Ziqian Li, Tanay Roy, David Rodríguez Pérez +3 more

Large-scale quantum computers will inevitably need quantum error correction to protect information against decoherence. Traditional error correction typically requires many qubits, along with high-efficiency error syndrome measurement and real-time feedback. Autonomous quantum error correction instead uses steady-state bath engineering to perform the correction in a hardware-efficient manner. In this work, we develop a new autonomous quantum error correction scheme that actively corrects single-photon loss and passively suppresses low-frequency dephasing, and we demonstrate an important experimental step towards its full implementation with transmons. Compared to uncorrected encoding, improvements are experimentally witnessed for the logical zero, one, and superposition states. Our results show the potential of implementing hardware-efficient autonomous quantum error correction to enhance the reliability of a transmon-based quantum information processor.

arXiv:2302.06707•Nature Communications•Feb 23, 2024•32 citations

Realization of a Logical Qubit with Suppressed Data Errors Beyond Break-Even

Revista, Zen, PHYSICS, 10

The realization of fault-tolerant quantum computation hinges critically on the ability to protect quantum information from environmental noise and operational imperfections. This paper presents an experimental demonstration of a logical qubit that exhibits suppressed data errors, robustly outperforming its constituent physical qubits and surpassing the crucial quantum error correction break-even point. We employed a novel superconducting circuit architecture based on a binomial encoding within a microwave cavity, coupled to an ancillary transmon qubit for real-time error detection and correction. Through precise control and rapid feedback mechanisms, we achieved a logical qubit lifetime significantly extended beyond the coherence limits of its individual physical components. The results show a quantifiable reduction in logical error rates, demonstrating the viability of active quantum error correction protocols to create more stable and reliable quantum information carriers. This work represents a significant step towards scalable quantum computing, establishing a foundation for building larger and more complex fault-tolerant quantum processors.

•Nov 28, 2025•0 citations

Hardware-Efficient and Fully Autonomous Quantum Error Correction in Superconducting Circuits

Eliot Kapit

Superconducting qubits are among the most promising platforms for building a quantum computer. However, individual qubit coherence times are not far past the scalability threshold for quantum error correction, meaning that millions of physical devices would be required to construct a useful quantum computer. Consequently, further increases in coherence time are very desirable. In this Letter, we blueprint a simple circuit consisting of two transmon qubits and two additional lossy qubits or resonators, which is passively protected against all single-qubit quantum error channels through a combination of continuous driving and engineered dissipation. Photon losses are rapidly corrected through two-photon drive fields implemented with driven superconducting quantum interference device couplings, and dephasing from random potential fluctuations is heavily suppressed by the drive fields used to implement the multiqubit Hamiltonian. Comparing our theoretical model to published noise estimates from recent experiments on flux and transmon qubits, we find that logical state coherence could be improved by a factor of 40 or more compared to the individual qubit T_{1} and T_{2} using this technique. We thus demonstrate that there is substantial headroom for improving the coherence of modern superconducting qubits with a fairly modest increase in device complexity.

arXiv:1510.06117•Physical Review Letters•Apr 12, 2016•83 citations

Hardware-Efficient Erasure Qubits With Superconducting Transmon Qutrits

Bao-Jie Liu, Ying-Ying Wang, Yu-Xin Wang +3 more

Quantum error correction using erasure qubits offers higher fault-tolerant thresholds and improved scaling by converting dominant physical errors into detectable erasures. In superconducting circuits, erasure qubits can be constructed using the dual-rail approach, which, however, requires additional qubit-count overhead and tailored coupling elements. Here, we demonstrate a hardware-efficient scheme that operates transmon qutrits as erasure qubits, which is compatible with standard superconducting circuit-QED hardware. The logical states $\ket{0_\text{L}}$ and $\ket{1_\text{L}}$ are represented by the ground and second excited states, while the dominant relaxation errors can be detected via an ancilla qubit using a microwave-activated two-qutrit SWAP gate. We demonstrate a logical qubit $T_1$ lifetime exceeding $500\,μ\mathrm{s}$, post-selected with repeated mid-circuit erasure detection, which is ten times longer than the $T_1$ time of the transmon physical qubit. Coherence times beyond $300\,μ\mathrm{s}$ are achieved using dynamical decoupling. Single-qubit gate operations reach average Clifford gate infidelity on the order of $10^{-4}$. We further demonstrate dual-purposing an ancilla qubit for both erasure detection and parity checking, showing heralded generation of Bell states between erasure qubits. These results suggest that mainstream architectures of transmon qubit arrays may already be capable of implementing erasure-based QEC strategies for hardware-efficient fault-tolerant quantum computing.

quant-pharXiv:2604.08672•Apr 13, 2026•3 citations
Physical qubits in a quantum computer are often represented by superposition states of single particles or excitations. Decay of the excitation itself is a fundamental error channel that is difficult to overcome via external drive or control techniques. Quantum error correcting codes, which encode information in superpositions involving multiple excitations, provide a path to preserve information beyond the capacity of individual excitations, but typically require exquisite active operations on the system. Here, we demonstrate a steady-state driven-dissipative quantum system, composed of a superconducting cavity and a transmon ancilla, that preserves a logical qubit beyond the photon-lifetime limit by about 5% using a binomial encoding. This realization of continuous quantum error correction at the breakeven point highlights the quantitative competitiveness of passive correction strategies, while circumventing some demanding hardware requirements of its active counterparts.
The remarkable discovery of Quantum Error Correction (QEC), which can overcome the errors experienced by a bit of quantum information (qubit), was a critical advance that gives hope for eventually realizing practical quantum computers. In principle, a system that implements QEC can actually pass a "break-even" point and preserve quantum information for longer than the lifetime of its constituent parts. Reaching the break-even point, however, has thus far remained an outstanding and challenging goal. Several previous works have demonstrated elements of QEC in NMR, ions, nitrogen vacancy (NV) centers, photons, and superconducting transmons. However, these works primarily illustrate the signatures or scaling properties of QEC codes rather than test the capacity of the system to extend the lifetime of quantum information over time. Here we demonstrate a QEC system that reaches the break-even point by suppressing the natural errors due to energy loss for a qubit logically encoded in superpositions of coherent states, or cat states of a superconducting resonator. Moreover, the experiment implements a full QEC protocol by using real-time feedback to encode, monitor naturally occurring errors, decode, and correct. As measured by full process tomography, the enhanced lifetime of the encoded information is 320 microseconds without any post-selection. This is 20 times greater than that of the system's transmon, over twice as long as an uncorrected logical encoding, and 10% longer than the highest quality element of the system (the resonator's 0, 1 Fock states). Our results illustrate the power of novel, hardware efficient qubit encodings over traditional QEC schemes. Furthermore, they advance the field of experimental error correction from confirming the basic concepts to exploring the metrics that drive system performance and the challenges in implementing a fault-tolerant system.
Abstract Quantum error correction (QEC) aims to protect logical qubits from noises by using the redundancy of a large Hilbert space, which allows errors to be detected and corrected in real time 1 . In most QEC codes 2–8 , a logical qubit is encoded in some discrete variables, for example photon numbers, so that the encoded quantum information can be unambiguously extracted after processing. Over the past decade, repetitive QEC has been demonstrated with various discrete-variable-encoded scenarios 9–17 . However, extending the lifetimes of thus-encoded logical qubits beyond the best available physical qubit still remains elusive, which represents a break-even point for judging the practical usefulness of QEC. Here we demonstrate a QEC procedure in a circuit quantum electrodynamics architecture 18 , where the logical qubit is binomially encoded in photon-number states of a microwave cavity 8 , dispersively coupled to an auxiliary superconducting qubit. By applying a pulse featuring a tailored frequency comb to the auxiliary qubit, we can repetitively extract the error syndrome with high fidelity and perform error correction with feedback control accordingly, thereby exceeding the break-even point by about 16% lifetime enhancement. Our work illustrates the potential of hardware-efficient discrete-variable encodings for fault-tolerant quantum computation 19 .
Large-scale quantum computers will inevitably need quantum error correction to protect information against decoherence. Traditional error correction typically requires many qubits, along with high-efficiency error syndrome measurement and real-time feedback. Autonomous quantum error correction instead uses steady-state bath engineering to perform the correction in a hardware-efficient manner. In this work, we develop a new autonomous quantum error correction scheme that actively corrects single-photon loss and passively suppresses low-frequency dephasing, and we demonstrate an important experimental step towards its full implementation with transmons. Compared to uncorrected encoding, improvements are experimentally witnessed for the logical zero, one, and superposition states. Our results show the potential of implementing hardware-efficient autonomous quantum error correction to enhance the reliability of a transmon-based quantum information processor.
The realization of fault-tolerant quantum computation hinges critically on the ability to protect quantum information from environmental noise and operational imperfections. This paper presents an experimental demonstration of a logical qubit that exhibits suppressed data errors, robustly outperforming its constituent physical qubits and surpassing the crucial quantum error correction break-even point. We employed a novel superconducting circuit architecture based on a binomial encoding within a microwave cavity, coupled to an ancillary transmon qubit for real-time error detection and correction. Through precise control and rapid feedback mechanisms, we achieved a logical qubit lifetime significantly extended beyond the coherence limits of its individual physical components. The results show a quantifiable reduction in logical error rates, demonstrating the viability of active quantum error correction protocols to create more stable and reliable quantum information carriers. This work represents a significant step towards scalable quantum computing, establishing a foundation for building larger and more complex fault-tolerant quantum processors.
Superconducting qubits are among the most promising platforms for building a quantum computer. However, individual qubit coherence times are not far past the scalability threshold for quantum error correction, meaning that millions of physical devices would be required to construct a useful quantum computer. Consequently, further increases in coherence time are very desirable. In this Letter, we blueprint a simple circuit consisting of two transmon qubits and two additional lossy qubits or resonators, which is passively protected against all single-qubit quantum error channels through a combination of continuous driving and engineered dissipation. Photon losses are rapidly corrected through two-photon drive fields implemented with driven superconducting quantum interference device couplings, and dephasing from random potential fluctuations is heavily suppressed by the drive fields used to implement the multiqubit Hamiltonian. Comparing our theoretical model to published noise estimates from recent experiments on flux and transmon qubits, we find that logical state coherence could be improved by a factor of 40 or more compared to the individual qubit T_{1} and T_{2} using this technique. We thus demonstrate that there is substantial headroom for improving the coherence of modern superconducting qubits with a fairly modest increase in device complexity.
Quantum error correction using erasure qubits offers higher fault-tolerant thresholds and improved scaling by converting dominant physical errors into detectable erasures. In superconducting circuits, erasure qubits can be constructed using the dual-rail approach, which, however, requires additional qubit-count overhead and tailored coupling elements. Here, we demonstrate a hardware-efficient scheme that operates transmon qutrits as erasure qubits, which is compatible with standard superconducting circuit-QED hardware. The logical states ∣0L⟩\ket{0_\text{L}}∣0L​⟩ and ∣1L⟩\ket{1_\text{L}}∣1L​⟩ are represented by the ground and second excited states, while the dominant relaxation errors can be detected via an ancilla qubit using a microwave-activated two-qutrit SWAP gate. We demonstrate a logical qubit T1T_1T1​ lifetime exceeding 500 μs500\,μ\mathrm{s}500μs, post-selected with repeated mid-circuit erasure detection, which is ten times longer than the T1T_1T1​ time of the transmon physical qubit. Coherence times beyond 300 μs300\,μ\mathrm{s}300μs are achieved using dynamical decoupling. Single-qubit gate operations reach average Clifford gate infidelity on the order of 10−410^{-4}10−4. We further demonstrate dual-purposing an ancilla qubit for both erasure detection and parity checking, showing heralded generation of Bell states between erasure qubits. These results suggest that mainstream architectures of transmon qubit arrays may already be capable of implementing erasure-based QEC strategies for hardware-efficient fault-tolerant quantum computing.