Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2302.06707 · Nature Communications

Autonomous error correction of a single logical qubit using two transmons

Ziqian Li, Tanay Roy, David Rodríguez Pérez, Kan-Heng Lee, Eliot Kapit, David Schuster

Published Feb 23, 2024• 32 citations
arXivHTMLPDF

Abstract

Large-scale quantum computers will inevitably need quantum error correction to protect information against decoherence. Traditional error correction typically requires many qubits, along with high-efficiency error syndrome measurement and real-time feedback. Autonomous quantum error correction instead uses steady-state bath engineering to perform the correction in a hardware-efficient manner. In this work, we develop a new autonomous quantum error correction scheme that actively corrects single-photon loss and passively suppresses low-frequency dephasing, and we demonstrate an important experimental step towards its full implementation with transmons. Compared to uncorrected encoding, improvements are experimentally witnessed for the logical zero, one, and superposition states. Our results show the potential of implementing hardware-efficient autonomous quantum error correction to enhance the reliability of a transmon-based quantum information processor.

DOI
10.1038/s41467-024-45858-z

Related papers

Hardware-Efficient and Fully Autonomous Quantum Error Correction in Superconducting Circuits

Eliot Kapit

Superconducting qubits are among the most promising platforms for building a quantum computer. However, individual qubit coherence times are not far past the scalability threshold for quantum error correction, meaning that millions of physical devices would be required to construct a useful quantum computer. Consequently, further increases in coherence time are very desirable. In this Letter, we blueprint a simple circuit consisting of two transmon qubits and two additional lossy qubits or resonators, which is passively protected against all single-qubit quantum error channels through a combination of continuous driving and engineered dissipation. Photon losses are rapidly corrected through two-photon drive fields implemented with driven superconducting quantum interference device couplings, and dephasing from random potential fluctuations is heavily suppressed by the drive fields used to implement the multiqubit Hamiltonian. Comparing our theoretical model to published noise estimates from recent experiments on flux and transmon qubits, we find that logical state coherence could be improved by a factor of 40 or more compared to the individual qubit T_{1} and T_{2} using this technique. We thus demonstrate that there is substantial headroom for improving the coherence of modern superconducting qubits with a fairly modest increase in device complexity.

arXiv:1510.06117•Physical Review Letters•Apr 12, 2016•83 citations

Repeated quantum error correction on a continuously encoded qubit by real-time feedback

Julia Cramer, Norbert Kalb, Michiel Adriaan Rol +6 more

Reliable quantum information processing in the face of errors is a major fundamental and technological challenge. Quantum error correction protects quantum states by encoding a logical quantum bit (qubit) in multiple physical qubits. To be compatible with universal fault-tolerant computations, it is essential that states remain encoded at all times and that errors are actively corrected. Here we demonstrate such active error correction on a continuously protected logical qubit using a diamond quantum processor. We encode the logical qubit in three long-lived nuclear spins, repeatedly detect phase errors by non-destructive measurements, and apply corrections by real-time feedback. The actively error-corrected qubit is robust against errors and encoded quantum superposition states are preserved beyond the natural dephasing time of the best physical qubit in the encoding. These results establish a powerful platform to investigate error correction under different types of noise and mark an important step towards fault-tolerant quantum information processing.

arXiv:1508.01388•Nature Communications•May 5, 2016•251 citations

Autonomous Quantum Error Correction of Spin-Oscillator Hybrid Qubits

Sungjoo Cho, Ju-yeon Gyhm, Hyukjoon Kwon +1 more

We propose a novel measurement-free scheme for stabilizing a spin-oscillator hybrid qubit via autonomous quantum error correction. The engineered Lindbladian renders the code space into an attractive steady-state subspace, realized by coupling the storage mode to a rapidly cooled bath through a controlled beam-splitter and spin-dependent displacement interactions. The continuous variable-discrete variable hybrid approach to autonomous quantum error correction preserves the hardware efficiency of conventional dissipation engineering while simplifying the required system-bath coupling. The construction is compatible with simple logical gates and leverages primitives already demonstrated in experimental platforms, such as trapped-ion systems, suggesting a practical route to hardware-efficient, noise-biased logical qubits without repeated syndrome measurements and feedforward.

quant-pharXiv:2604.11145•Apr 14, 2026•1 citation

Hybrid quantum error correction in qubit architectures

Lasse Bjørn Kristensen, Morten Kjærgaard, Christian Kraglund Andersen +1 more

Noise and errors are inevitable parts of any practical implementation of a quantum computer. As a result, large-scale quantum computation will require ways to detect and correct errors in quantum information. Here we present such a quantum error-correcting scheme for correcting the dominant phase and decay errors in superconducting qubit architectures using a hybrid approach combining autonomous correction based on engineered dissipation with traditional measurement-based quantum error correction. Using numerical simulations with realistic device parameters for superconducting circuits, we show that this scheme can achieve a five- to tenfold increase in storage time while using only six qubits for the encoding and two ancillary qubits for the operation of the autonomous correction, providing a potentially large reduction of qubit overhead compared to typical measurement-based error-correction schemes. Furthermore, the scheme relies on standard interactions and qubit driving available in most major quantum computing platforms, making it implementable in a wide range of architectures.

arXiv:1909.09112•Physical Review A•Aug 3, 2023•9 citations

The Gain-Engineered Transmon

Ian Yang, Francesco Adinolfi, Alessandro Bruno +3 more

The interaction between a qubit and its environment can be engineered such that one error channel dominates over all others, resulting in noise bias. This property enables error correction codes to focus on the dominant error type, thereby significantly reducing the number of physical systems required for fault-tolerant quantum computation. However, engineering noise bias typically introduces complexity at the physical system level, which decreases its usefulness by limiting scalability. Here, we introduce and experimentally realize a noise-biased qubit in a standard transmon-readout resonator circuit, one of the most common superconducting architectures, by only adding a single microwave tone. We encode the qubit in the transmon $|\mathrm{g}\rangle$- and $|\mathrm{f}\rangle$-states, and engineer a frequency-selective gain channel that counteracts single-photon loss errors between the computational states. We demonstrate an order-of-magnitude enhancement in relaxation time compared to the $|\mathrm{g}\rangle-|\mathrm{e}\rangle$ encoding, conceding only a factor-of-two decrease in the echo-coherence time. Furthermore, we show that this qubit is compatible with fast, high-fidelity operations. Our results open a path towards using this system as a simple building-block for hardware-efficient quantum error detection and correction schemes.

quant-pharXiv:2608.26018•Aug 27, 2026•0 citations

Passive Quantum Error Correction of Photon Loss at Breakeven

Shruti Shirol, Sean van Geldern, Hanzhe Xi +1 more

Physical qubits in a quantum computer are often represented by superposition states of single particles or excitations. Decay of the excitation itself is a fundamental error channel that is difficult to overcome via external drive or control techniques. Quantum error correcting codes, which encode information in superpositions involving multiple excitations, provide a path to preserve information beyond the capacity of individual excitations, but typically require exquisite active operations on the system. Here, we demonstrate a steady-state driven-dissipative quantum system, composed of a superconducting cavity and a transmon ancilla, that preserves a logical qubit beyond the photon-lifetime limit by about 5% using a binomial encoding. This realization of continuous quantum error correction at the breakeven point highlights the quantitative competitiveness of passive correction strategies, while circumventing some demanding hardware requirements of its active counterparts.

arXiv:2510.19794•Physical Review X•Mar 3, 2026•7 citations
Large-scale quantum computers will inevitably need quantum error correction to protect information against decoherence. Traditional error correction typically requires many qubits, along with high-efficiency error syndrome measurement and real-time feedback. Autonomous quantum error correction instead uses steady-state bath engineering to perform the correction in a hardware-efficient manner. In this work, we develop a new autonomous quantum error correction scheme that actively corrects single-photon loss and passively suppresses low-frequency dephasing, and we demonstrate an important experimental step towards its full implementation with transmons. Compared to uncorrected encoding, improvements are experimentally witnessed for the logical zero, one, and superposition states. Our results show the potential of implementing hardware-efficient autonomous quantum error correction to enhance the reliability of a transmon-based quantum information processor.
Superconducting qubits are among the most promising platforms for building a quantum computer. However, individual qubit coherence times are not far past the scalability threshold for quantum error correction, meaning that millions of physical devices would be required to construct a useful quantum computer. Consequently, further increases in coherence time are very desirable. In this Letter, we blueprint a simple circuit consisting of two transmon qubits and two additional lossy qubits or resonators, which is passively protected against all single-qubit quantum error channels through a combination of continuous driving and engineered dissipation. Photon losses are rapidly corrected through two-photon drive fields implemented with driven superconducting quantum interference device couplings, and dephasing from random potential fluctuations is heavily suppressed by the drive fields used to implement the multiqubit Hamiltonian. Comparing our theoretical model to published noise estimates from recent experiments on flux and transmon qubits, we find that logical state coherence could be improved by a factor of 40 or more compared to the individual qubit T_{1} and T_{2} using this technique. We thus demonstrate that there is substantial headroom for improving the coherence of modern superconducting qubits with a fairly modest increase in device complexity.
Reliable quantum information processing in the face of errors is a major fundamental and technological challenge. Quantum error correction protects quantum states by encoding a logical quantum bit (qubit) in multiple physical qubits. To be compatible with universal fault-tolerant computations, it is essential that states remain encoded at all times and that errors are actively corrected. Here we demonstrate such active error correction on a continuously protected logical qubit using a diamond quantum processor. We encode the logical qubit in three long-lived nuclear spins, repeatedly detect phase errors by non-destructive measurements, and apply corrections by real-time feedback. The actively error-corrected qubit is robust against errors and encoded quantum superposition states are preserved beyond the natural dephasing time of the best physical qubit in the encoding. These results establish a powerful platform to investigate error correction under different types of noise and mark an important step towards fault-tolerant quantum information processing.
We propose a novel measurement-free scheme for stabilizing a spin-oscillator hybrid qubit via autonomous quantum error correction. The engineered Lindbladian renders the code space into an attractive steady-state subspace, realized by coupling the storage mode to a rapidly cooled bath through a controlled beam-splitter and spin-dependent displacement interactions. The continuous variable-discrete variable hybrid approach to autonomous quantum error correction preserves the hardware efficiency of conventional dissipation engineering while simplifying the required system-bath coupling. The construction is compatible with simple logical gates and leverages primitives already demonstrated in experimental platforms, such as trapped-ion systems, suggesting a practical route to hardware-efficient, noise-biased logical qubits without repeated syndrome measurements and feedforward.
Noise and errors are inevitable parts of any practical implementation of a quantum computer. As a result, large-scale quantum computation will require ways to detect and correct errors in quantum information. Here we present such a quantum error-correcting scheme for correcting the dominant phase and decay errors in superconducting qubit architectures using a hybrid approach combining autonomous correction based on engineered dissipation with traditional measurement-based quantum error correction. Using numerical simulations with realistic device parameters for superconducting circuits, we show that this scheme can achieve a five- to tenfold increase in storage time while using only six qubits for the encoding and two ancillary qubits for the operation of the autonomous correction, providing a potentially large reduction of qubit overhead compared to typical measurement-based error-correction schemes. Furthermore, the scheme relies on standard interactions and qubit driving available in most major quantum computing platforms, making it implementable in a wide range of architectures.
The interaction between a qubit and its environment can be engineered such that one error channel dominates over all others, resulting in noise bias. This property enables error correction codes to focus on the dominant error type, thereby significantly reducing the number of physical systems required for fault-tolerant quantum computation. However, engineering noise bias typically introduces complexity at the physical system level, which decreases its usefulness by limiting scalability. Here, we introduce and experimentally realize a noise-biased qubit in a standard transmon-readout resonator circuit, one of the most common superconducting architectures, by only adding a single microwave tone. We encode the qubit in the transmon ∣g⟩|\mathrm{g}\rangle∣g⟩- and ∣f⟩|\mathrm{f}\rangle∣f⟩-states, and engineer a frequency-selective gain channel that counteracts single-photon loss errors between the computational states. We demonstrate an order-of-magnitude enhancement in relaxation time compared to the ∣g⟩−∣e⟩|\mathrm{g}\rangle-|\mathrm{e}\rangle∣g⟩−∣e⟩ encoding, conceding only a factor-of-two decrease in the echo-coherence time. Furthermore, we show that this qubit is compatible with fast, high-fidelity operations. Our results open a path towards using this system as a simple building-block for hardware-efficient quantum error detection and correction schemes.
Physical qubits in a quantum computer are often represented by superposition states of single particles or excitations. Decay of the excitation itself is a fundamental error channel that is difficult to overcome via external drive or control techniques. Quantum error correcting codes, which encode information in superpositions involving multiple excitations, provide a path to preserve information beyond the capacity of individual excitations, but typically require exquisite active operations on the system. Here, we demonstrate a steady-state driven-dissipative quantum system, composed of a superconducting cavity and a transmon ancilla, that preserves a logical qubit beyond the photon-lifetime limit by about 5% using a binomial encoding. This realization of continuous quantum error correction at the breakeven point highlights the quantitative competitiveness of passive correction strategies, while circumventing some demanding hardware requirements of its active counterparts.