Superconducting qubits are among the most promising platforms for building a quantum computer. However, individual qubit coherence times are not far past the scalability threshold for quantum error correction, meaning that millions of physical devices would be required to construct a useful quantum computer. Consequently, further increases in coherence time are very desirable. In this Letter, we blueprint a simple circuit consisting of two transmon qubits and two additional lossy qubits or resonators, which is passively protected against all single-qubit quantum error channels through a combination of continuous driving and engineered dissipation. Photon losses are rapidly corrected through two-photon drive fields implemented with driven superconducting quantum interference device couplings, and dephasing from random potential fluctuations is heavily suppressed by the drive fields used to implement the multiqubit Hamiltonian. Comparing our theoretical model to published noise estimates from recent experiments on flux and transmon qubits, we find that logical state coherence could be improved by a factor of 40 or more compared to the individual qubit T_{1} and T_{2} using this technique. We thus demonstrate that there is substantial headroom for improving the coherence of modern superconducting qubits with a fairly modest increase in device complexity.
Superconducting qubits are among the most promising platforms for building a quantum computer. However, individual qubit coherence times are not far past the scalability threshold for quantum error correction, meaning that millions of physical devices would be required to construct a useful quantum computer. Consequently, further increases in coherence time are very desirable. In this Letter, we blueprint a simple circuit consisting of two transmon qubits and two additional lossy qubits or resonators, which is passively protected against all single-qubit quantum error channels through a combination of continuous driving and engineered dissipation. Photon losses are rapidly corrected through two-photon drive fields implemented with driven superconducting quantum interference device couplings, and dephasing from random potential fluctuations is heavily suppressed by the drive fields used to implement the multiqubit Hamiltonian. Comparing our theoretical model to published noise estimates from recent experiments on flux and transmon qubits, we find that logical state coherence could be improved by a factor of 40 or more compared to the individual qubit T_{1} and T_{2} using this technique. We thus demonstrate that there is substantial headroom for improving the coherence of modern superconducting qubits with a fairly modest increase in device complexity.
Large-scale quantum computers will inevitably need quantum error correction to protect information against decoherence. Traditional error correction typically requires many qubits, along with high-efficiency error syndrome measurement and real-time feedback. Autonomous quantum error correction instead uses steady-state bath engineering to perform the correction in a hardware-efficient manner. In this work, we develop a new autonomous quantum error correction scheme that actively corrects single-photon loss and passively suppresses low-frequency dephasing, and we demonstrate an important experimental step towards its full implementation with transmons. Compared to uncorrected encoding, improvements are experimentally witnessed for the logical zero, one, and superposition states. Our results show the potential of implementing hardware-efficient autonomous quantum error correction to enhance the reliability of a transmon-based quantum information processor.
Noise and errors are inevitable parts of any practical implementation of a quantum computer. As a result, large-scale quantum computation will require ways to detect and correct errors in quantum information. Here we present such a quantum error-correcting scheme for correcting the dominant phase and decay errors in superconducting qubit architectures using a hybrid approach combining autonomous correction based on engineered dissipation with traditional measurement-based quantum error correction. Using numerical simulations with realistic device parameters for superconducting circuits, we show that this scheme can achieve a five- to tenfold increase in storage time while using only six qubits for the encoding and two ancillary qubits for the operation of the autonomous correction, providing a potentially large reduction of qubit overhead compared to typical measurement-based error-correction schemes. Furthermore, the scheme relies on standard interactions and qubit driving available in most major quantum computing platforms, making it implementable in a wide range of architectures.
Quantum error correction using erasure qubits offers higher fault-tolerant thresholds and improved scaling by converting dominant physical errors into detectable erasures. In superconducting circuits, erasure qubits can be constructed using the dual-rail approach, which, however, requires additional qubit-count overhead and tailored coupling elements. Here, we demonstrate a hardware-efficient scheme that operates transmon qutrits as erasure qubits, which is compatible with standard superconducting circuit-QED hardware. The logical states ∣0L⟩ and ∣1L⟩ are represented by the ground and second excited states, while the dominant relaxation errors can be detected via an ancilla qubit using a microwave-activated two-qutrit SWAP gate. We demonstrate a logical qubit T1 lifetime exceeding 500μs, post-selected with repeated mid-circuit erasure detection, which is ten times longer than the T1 time of the transmon physical qubit. Coherence times beyond 300μs are achieved using dynamical decoupling. Single-qubit gate operations reach average Clifford gate infidelity on the order of 10−4. We further demonstrate dual-purposing an ancilla qubit for both erasure detection and parity checking, showing heralded generation of Bell states between erasure qubits. These results suggest that mainstream architectures of transmon qubit arrays may already be capable of implementing erasure-based QEC strategies for hardware-efficient fault-tolerant quantum computing.
Large-scale quantum computers will inevitably need quantum error correction (QEC) to protect information against decoherence. Given that the overhead of such error correction is often formidable, autonomous quantum error correction (AQEC) proposals offer a promising near-term alternative. AQEC schemes work by transforming error states into excitations that can be efficiently removed through engineered dissipation. The recently proposed AQEC scheme by Li , called the Star code, can autonomously correct or suppress all single qubit error channels using two transmons as encoders with a tunable coupler and two lossy resonators as a cooling source. The Star code requires only two-photon interactions and can be realized with linear coupling elements, avoiding experimentally challenging higher-order terms needed in many other AQEC proposals, but needs carefully selected parameters to achieve quadratic improvements in logical states' lifetimes. Here, we theoretically and numerically demonstrate the optimal parameter choices in the Star code. We further discuss adapting the Star code to other planar superconducting circuits, which offers a scalable alternative to single qubits for incorporation in larger quantum computers or error correction codes. Published by the American Physical Society 2024
This thesis explores novel strategies for advancing superconducting quantum computing through a series of experimental investigations and device innovations. Grounded in the development of circuit quantum electrodynamics, the work addresses the challenges posed by the limitations of coherent control, coherence time and scaling of superconducting qubits. Focusing on transmon qubits, the thesis first reviews the foundational principles of circuit quantum electrodynamics and the critical role of the transmon in achieving robust qubit performance. Three experimental studies form the core of this work. The first study demonstrates a universal quantum gate set for strongly coupled transmons. By exploiting the residual ZZ interaction, the work introduces a novel two-axis gate protocol for single-qubit operations and implements both CZ and CNOT gates with high fidelities, highlighting the potential for fast, low-error quantum operations in the strong coupling regime. The second study investigates a dual-rail qubit architecture using parametrically coupled transmons, showcasing a hardware-efficient approach to quantum error correction. This experiment converts single-photon loss errors into detectable erasures and leverages mid-circuit detection to enhance qubit coherence, thereby advancing fault-tolerant quantum computing schemes in the NISQ era. The final study focuses on the development of merged-element transmons (MET) and their FinMET variants. By integrating the Josephson junction and shunt capacitor into a single trilayer device, these innovations achieve a dramatic reduction in device footprint while addressing loss channels through advanced materials engineering, ultimately paving the way for scalable, high-coherence quantum circuits. Collectively, these contributions demonstrate significant progress in quantum gate design, error mitigation, and qubit architecture, offering promising routes toward the realization of largescale, fault-tolerant quantum computers
The interaction between a qubit and its environment can be engineered such that one error channel dominates over all others, resulting in noise bias. This property enables error correction codes to focus on the dominant error type, thereby significantly reducing the number of physical systems required for fault-tolerant quantum computation. However, engineering noise bias typically introduces complexity at the physical system level, which decreases its usefulness by limiting scalability. Here, we introduce and experimentally realize a noise-biased qubit in a standard transmon-readout resonator circuit, one of the most common superconducting architectures, by only adding a single microwave tone. We encode the qubit in the transmon ∣g⟩- and ∣f⟩-states, and engineer a frequency-selective gain channel that counteracts single-photon loss errors between the computational states. We demonstrate an order-of-magnitude enhancement in relaxation time compared to the ∣g⟩−∣e⟩ encoding, conceding only a factor-of-two decrease in the echo-coherence time. Furthermore, we show that this qubit is compatible with fast, high-fidelity operations. Our results open a path towards using this system as a simple building-block for hardware-efficient quantum error detection and correction schemes.