Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2510.03618

Floquet Diamond Sensor with Optimal Precision

Qigeng Duan, Teng Li, Siqi Chen, Pang, Shengshi, Lu He

Published Oct 4, 2025• 1 citation
arXivHTMLPDF

Abstract

The diamond sensor has emerged as a promising platform for quantum sensing, enabling the estimation of physical quantities -- such as microwave~(MW) field -- with precision unattainable by classical counterpart. However, traditional diamond sensors suffer severe precision degradation when the signal MW is not resonant with the sensor transition frequency. Here, we propose and demonstrate a Floquet diamond sensor~(FDS) for high-precision off-resonant MW amplitude sensing without attenuating the strength of the signal MW. The periodic driven field effectively induces an quasi-energy shift that matches the off-resonant MW frequency. The measurement precision of FDS is characterized by quantum Fisher information, which approaches the ultimate precision -- Heisenberg limit -- within the coherent time. Furthermore, the FDS exhibits robust tolerance to practical control errors and is compatible with dynamical coupling protocol, enabling a robust and high-sensitivity magnetic sensing. Our results confirm the quantum advantage of quantum sensing and provide a practical technology for high-precision off-resonant MW sensing.

DOI
10.48550/arxiv.2510.03618

Related papers

Heterodyne sensing of microwaves with a quantum sensor

Jonas Meinel, Vadim Vorobyov, Boris V. Yavkin +5 more

Diamond quantum sensors are sensitive to weak microwave magnetic fields resonant to the spin transitions. However, the spectral resolution in such protocols is ultimately limited by the sensor lifetime. Here, we demonstrate a heterodyne detection method for microwaves (MW) leading to a lifetime independent spectral resolution in the GHz range. We reference the MW signal to a local oscillator by generating the initial superposition state from a coherent source. Experimentally, we achieve a spectral resolution below 1 Hz for a 4 GHz signal far below the sensor lifetime limit of kilohertz. Furthermore, we show control over the interaction of the MW-field with the two-level system by applying dressing fields, pulsed Mollow absorption and Floquet dynamics under strong longitudinal radio frequency drive. While pulsed Mollow absorption leads to improved sensitivity, the Floquet dynamics allow robust control, independent from the system's resonance frequency. Our work is important for future studies in sensing weak microwave signals in a wide frequency range with high spectral resolution.

arXiv:2008.10068•Nature Communications•May 12, 2021•88 citations

Sensing of Arbitrary-Frequency Fields Using a Quantum Mixer

Guoqing Wang, Yi-Xiang Liu, Jennifer M. Schloss +3 more

Quantum sensors such as spin defects in diamond have achieved excellent performance by combining high sensitivity with spatial resolution.Unfortunately, these sensors can only detect signal fields with frequency in a few accessible ranges, typically low frequencies up to the experimentally achievable control field amplitudes and a narrow window around the sensors' resonance frequency.Here, we develop and demonstrate a technique for sensing arbitrary-frequency signals by using the sensor qubit as a quantum frequency mixer, enabling a variety of sensing applications.The technique leverages nonlinear effects in periodically driven (Floquet) quantum systems to achieve quantum frequency mixing of the signal and an applied bias ac field.The frequency-mixed field can be detected using well-developed sensing techniques such as Rabi and CPMG with the only additional requirement of the bias field.We further show that the frequency mixing can distinguish vectorial components of an oscillating signal field, thus enabling arbitrary-frequency vector magnetometry.We experimentally demonstrate this protocol with nitrogenvacancy centers in diamond to sense a 150-MHz signal field, proving the versatility of the quantum mixer sensing technique.

Physical Review X•Jun 17, 2022•73 citations

A Robust Real-Time Quantum Sensing System Based on an Ensemble of Nitrogen-Vacancy Centers in Diamond

Yaowu Lei, Feng Zhou, Dong Li +6 more

The nitrogen-vacancy centers in diamond have exhibited excellent sensing capabilities. By applying the resonance frequency tracking (RFT) method in a closed-loop system, magnetic-field measurements with a wide dynamic range have been demonstrated. However, the previous strategies employ phase-sensitive control signals, which degrade control robustness and reduce tracking rates, thereby impeding real-time measurements. Here, an amplitude–phase joint discrimination strategy is proposed to improve robustness, overcoming the limitations of existing strategies that are sensitive to phase delays in fluorescence signal transmission. Moreover, to improve the tracking speed, a customized device, integrating a fast-response lock-in amplifier (LIA) and a frequency-agile microwave (MW) source, is reported. The LIA achieves a response time as short as 20 μs, while the MW source reaches a frequency switching time of 1 μs. The proposed strategy and customized device are implemented and evaluated on an all-fiber quantum current sensing system. Test results show that the system achieves a maximum sampling rate of 20 kHz, with excellent linearity (a linear deviation of 0.37% over the range of 0-120 A) and high accuracy (a measurement error of 0.73% at 80 A), making it promising for a wide range of high-speed quantum measurement scenarios.

IEEE Transactions on Instrumentation and Measurement•Jan 1, 2026•0 citations

Impact of microwave phase noise on diamond quantum sensing

Andris Bērziņš, Maziar Saleh Ziabari, Yaser Silani +8 more

Precision optical measurements of the electron-spin precession of nitrogen-vacancy (NV) centers in diamond form the basis of numerous applications. The most sensitivity-demanding applications, such as femtotesla magnetometry, require the ability to measure changes in GHz spin transition frequencies at the sub-millihertz level, corresponding to a fractional resolution of better than 10 − 12 . Here we study the impact of microwave (MW) phase noise on the response of an NV sensor. Fluctuations of the phase of the MW waveform cause undesired rotations of the NV spin state. These fluctuations are imprinted in the optical readout signal and, left unmitigated, are indistinguishable from magnetic-field noise. We show that the phase noise of several common commercial MW generators results in an effective pT s 1 / 2 -range noise floor that varies with the MW carrier frequency and the detection frequency of the pulse sequence. The data are described by a frequency-domain model incorporating the MW phase-noise spectrum and the filter-function response of the sensing protocol. For controlled injection of white and random-walk phase noise, the observed NV magnetic noise floor is described by simple analytic expressions that accurately capture the scaling with pulse sequence length and the number of π pulses. We outline several strategies to suppress the impact of MW phase noise and implement a version, based on gradiometry, that realizes a > 10 -fold suppression. Our study highlights an important challenge in the pursuit of sensitive diamond quantum sensors and is applicable to other qubit systems with a large transition frequency. Published by the American Physical Society 2024

arXiv:2407.06465•Physical Review Research•Nov 15, 2024•14 citations

High bandwidth heterodyne sensing with bulk NV diamond

H. A. M. Taylor, J. P. Duff, L. B. Miller +4 more

Developing high performance portable sensors is of significant importance for both terrestrial and satellite communications, with quantum sensors offering potential advantages in sensitivity and bandwidth. The nitrogen vacancy center in diamond is a popular quantum sensing platform for its relative simplicity and wide range of acceptable operating conditions, but suffers a limited instantaneous bandwidth due to the narrow linewidth of the spin resonance. In this work, we first present a magnetic quantum sensing scheme utilizing heterodyne mixing with strong optical and microwave driving, achieving MHz-scale instantaneous bandwidth with a sensitivity of $548 \; \text{pT/}\sqrt{\text{Hz}}$ in an active diamond volume of $ 2.5\times 10^{-4} \; \text{mm}^3$ with $2 \times 10^{11}$ NV centers. We then demonstrate expansion of the sensing bandwidth by employing a strong magnetic gradient and many individually modulated microwave control fields, expanding the single resonance bandwidth to 48 MHz with a peak sensitivity of $8.5 \; \text{nT/}\sqrt{\text{Hz}}$.

quant-pharXiv:2610.39022•Physical Review Applied•Oct 30, 2026•1 citation

A Sub-10 pT·Hz –1/2 Diamond Quantum Sensor with 1/ f Noise Suppression Using 561 nm Laser Excitation

Xiao Peng, Qihui Liu, Chengyu Yang +9 more

The nitrogen–vacancy center in diamond enables highly sensitive magnetic-field measurements. In this work, we demonstrate an excellent sensitivity of 7.9 pT·Hz –1/2 in the near-DC range of 1 to 1000 Hz. This performance is achieved using a 35 mW laser power and 1 mW microwave power enabled by 561 nm laser excitation and the resonant-antenna design. By leveraging dual resonance with intrinsic π shift for real-time common-mode rejection, this technique effectively suppresses low-frequency noise and pushes the 1/ f corner frequency down to 1 Hz, with a measured sensitivity at 1 Hz of 10.6 pT·Hz –1/2 . The magnetometer also exhibits excellent capability in detecting magnetic anomalies, promoting the practical use of diamond quantum sensors in biomedical, geophysical, and other real-world applications.

ACS Photonics•Mar 24, 2026•4 citations
The diamond sensor has emerged as a promising platform for quantum sensing, enabling the estimation of physical quantities -- such as microwave~(MW) field -- with precision unattainable by classical counterpart. However, traditional diamond sensors suffer severe precision degradation when the signal MW is not resonant with the sensor transition frequency. Here, we propose and demonstrate a Floquet diamond sensor~(FDS) for high-precision off-resonant MW amplitude sensing without attenuating the strength of the signal MW. The periodic driven field effectively induces an quasi-energy shift that matches the off-resonant MW frequency. The measurement precision of FDS is characterized by quantum Fisher information, which approaches the ultimate precision -- Heisenberg limit -- within the coherent time. Furthermore, the FDS exhibits robust tolerance to practical control errors and is compatible with dynamical coupling protocol, enabling a robust and high-sensitivity magnetic sensing. Our results confirm the quantum advantage of quantum sensing and provide a practical technology for high-precision off-resonant MW sensing.
Diamond quantum sensors are sensitive to weak microwave magnetic fields resonant to the spin transitions. However, the spectral resolution in such protocols is ultimately limited by the sensor lifetime. Here, we demonstrate a heterodyne detection method for microwaves (MW) leading to a lifetime independent spectral resolution in the GHz range. We reference the MW signal to a local oscillator by generating the initial superposition state from a coherent source. Experimentally, we achieve a spectral resolution below 1 Hz for a 4 GHz signal far below the sensor lifetime limit of kilohertz. Furthermore, we show control over the interaction of the MW-field with the two-level system by applying dressing fields, pulsed Mollow absorption and Floquet dynamics under strong longitudinal radio frequency drive. While pulsed Mollow absorption leads to improved sensitivity, the Floquet dynamics allow robust control, independent from the system's resonance frequency. Our work is important for future studies in sensing weak microwave signals in a wide frequency range with high spectral resolution.
Quantum sensors such as spin defects in diamond have achieved excellent performance by combining high sensitivity with spatial resolution.Unfortunately, these sensors can only detect signal fields with frequency in a few accessible ranges, typically low frequencies up to the experimentally achievable control field amplitudes and a narrow window around the sensors' resonance frequency.Here, we develop and demonstrate a technique for sensing arbitrary-frequency signals by using the sensor qubit as a quantum frequency mixer, enabling a variety of sensing applications.The technique leverages nonlinear effects in periodically driven (Floquet) quantum systems to achieve quantum frequency mixing of the signal and an applied bias ac field.The frequency-mixed field can be detected using well-developed sensing techniques such as Rabi and CPMG with the only additional requirement of the bias field.We further show that the frequency mixing can distinguish vectorial components of an oscillating signal field, thus enabling arbitrary-frequency vector magnetometry.We experimentally demonstrate this protocol with nitrogenvacancy centers in diamond to sense a 150-MHz signal field, proving the versatility of the quantum mixer sensing technique.
The nitrogen-vacancy centers in diamond have exhibited excellent sensing capabilities. By applying the resonance frequency tracking (RFT) method in a closed-loop system, magnetic-field measurements with a wide dynamic range have been demonstrated. However, the previous strategies employ phase-sensitive control signals, which degrade control robustness and reduce tracking rates, thereby impeding real-time measurements. Here, an amplitude–phase joint discrimination strategy is proposed to improve robustness, overcoming the limitations of existing strategies that are sensitive to phase delays in fluorescence signal transmission. Moreover, to improve the tracking speed, a customized device, integrating a fast-response lock-in amplifier (LIA) and a frequency-agile microwave (MW) source, is reported. The LIA achieves a response time as short as 20 μs, while the MW source reaches a frequency switching time of 1 μs. The proposed strategy and customized device are implemented and evaluated on an all-fiber quantum current sensing system. Test results show that the system achieves a maximum sampling rate of 20 kHz, with excellent linearity (a linear deviation of 0.37% over the range of 0-120 A) and high accuracy (a measurement error of 0.73% at 80 A), making it promising for a wide range of high-speed quantum measurement scenarios.
Precision optical measurements of the electron-spin precession of nitrogen-vacancy (NV) centers in diamond form the basis of numerous applications. The most sensitivity-demanding applications, such as femtotesla magnetometry, require the ability to measure changes in GHz spin transition frequencies at the sub-millihertz level, corresponding to a fractional resolution of better than 10 − 12 . Here we study the impact of microwave (MW) phase noise on the response of an NV sensor. Fluctuations of the phase of the MW waveform cause undesired rotations of the NV spin state. These fluctuations are imprinted in the optical readout signal and, left unmitigated, are indistinguishable from magnetic-field noise. We show that the phase noise of several common commercial MW generators results in an effective pT s 1 / 2 -range noise floor that varies with the MW carrier frequency and the detection frequency of the pulse sequence. The data are described by a frequency-domain model incorporating the MW phase-noise spectrum and the filter-function response of the sensing protocol. For controlled injection of white and random-walk phase noise, the observed NV magnetic noise floor is described by simple analytic expressions that accurately capture the scaling with pulse sequence length and the number of π pulses. We outline several strategies to suppress the impact of MW phase noise and implement a version, based on gradiometry, that realizes a > 10 -fold suppression. Our study highlights an important challenge in the pursuit of sensitive diamond quantum sensors and is applicable to other qubit systems with a large transition frequency. Published by the American Physical Society 2024
Developing high performance portable sensors is of significant importance for both terrestrial and satellite communications, with quantum sensors offering potential advantages in sensitivity and bandwidth. The nitrogen vacancy center in diamond is a popular quantum sensing platform for its relative simplicity and wide range of acceptable operating conditions, but suffers a limited instantaneous bandwidth due to the narrow linewidth of the spin resonance. In this work, we first present a magnetic quantum sensing scheme utilizing heterodyne mixing with strong optical and microwave driving, achieving MHz-scale instantaneous bandwidth with a sensitivity of 548  pT/Hz548 \; \text{pT/}\sqrt{\text{Hz}}548pT/Hz​ in an active diamond volume of $ 2.5\times 10^{-4} \; \text{mm}^3$ with 2×10112 \times 10^{11}2×1011 NV centers. We then demonstrate expansion of the sensing bandwidth by employing a strong magnetic gradient and many individually modulated microwave control fields, expanding the single resonance bandwidth to 48 MHz with a peak sensitivity of 8.5  nT/Hz8.5 \; \text{nT/}\sqrt{\text{Hz}}8.5nT/Hz​.
The nitrogen–vacancy center in diamond enables highly sensitive magnetic-field measurements. In this work, we demonstrate an excellent sensitivity of 7.9 pT·Hz –1/2 in the near-DC range of 1 to 1000 Hz. This performance is achieved using a 35 mW laser power and 1 mW microwave power enabled by 561 nm laser excitation and the resonant-antenna design. By leveraging dual resonance with intrinsic π shift for real-time common-mode rejection, this technique effectively suppresses low-frequency noise and pushes the 1/ f corner frequency down to 1 Hz, with a measured sensitivity at 1 Hz of 10.6 pT·Hz –1/2 . The magnetometer also exhibits excellent capability in detecting magnetic anomalies, promoting the practical use of diamond quantum sensors in biomedical, geophysical, and other real-world applications.