Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2506.23455 · IEEE Transactions on Wireless Communications

General Signal Model and Capacity Limit for Rydberg Quantum Information System

Jieao Zhu, Linglong Dai

Published Dec 4, 2025• 11 citations
arXivHTMLPDF

Abstract

Rydberg atomic receivers represent a transformative approach to achieving high-sensitivity, broadband, and miniaturized radio frequency (RF) reception. However, existing static signal models for Rydberg atomic receivers rely on the steady-state assumption of atomic quantum states, which cannot fully describe the signal reception process of dynamic signals. To fill in this gap, in this paper, we present a general model to compute the dynamic signal response of Rydberg atomic receivers in closed form. Specifically, by applying small-signal perturbation techniques to the quantum master equation, we derive closed-form Laplace domain transfer functions that characterize the receiver’s dynamic responses to time-varying signal fields. To gain more insights into the quantum-based RF-photocurrent conversion process, we further introduce the concept of quantum transconductance that describes the quantum system as an equivalent classical system. By applying quantum transconductance, we quantify the influence of in-band blackbody radiation (BBR) noise on the atomic receiver sensitivity. Extensive simulations for Rydberg atomic receivers validate the proposed signal model, and demonstrate the possibility of quantum receivers to outperform classical electronic receivers through the improvement of quantum transconductance.

DOI
10.1109/twc.2025.3637029

Related papers

A Transfer Function-Based Dynamic Signal Model for Rydberg Atomic Quantum Receivers

Jieao Zhu, Linglong Dai

Rydberg atomic quantum receivers represent a transformative approach to achieving high-sensitivity, broadband, and miniaturized radio frequency (RF) reception. However, existing static signal models for Rydberg atomic receivers rely on the steady-state assumption of atomic quantum states, which cannot fully describe the signal reception process of dynamic signals. To fill in this gap, in this paper, we present a transfer function-based model to compute the dynamic signal response of Rydberg atomic receivers in closed form. Specifically, by applying small-signal perturbation techniques to the quantum master equation, we derive closed-form Laplace domain transfer functions that characterize the receiver’s dynamic responses to time-varying signal fields. To gain more insights into the quantum-based RF-photocurrent conversion process, we further introduce the concept of quantum transconductance that describes the quantum system as an equivalent classical system. Simulations for Rydberg atomic receivers validate the proposed signal model, and demonstrate the possibility of quantum receivers to outperform classical electronic receivers through the improvement of quantum transconductance.

IEEE Vehicular Technology Conference•Oct 19, 2025•0 citations

Rydberg Atomic Quantum Receivers for Classical Wireless Communications and Sensing: Their Models and Performance

Tierui Gong, Jiaming Sun, Chau Yuen +6 more

The significant progress of quantum sensing technologies offer numerous radical solutions for measuring a multitude of physical quantities at an unprecedented precision. Among them, Rydberg atomic quantum receivers (RAQRs) emerge as an eminent solution for detecting the electric field of radio frequency (RF) signals, exhibiting great potential in assisting classical wireless communications and sensing. So far, most experimental studies have aimed for the proof of physical concepts to reveal its promise, while the practical signal model of RAQR-aided wireless communications and sensing remained under-explored. Furthermore, the performance of RAQR-based wireless receivers and their advantages over classical RF receivers have not been fully characterized. To fill these gaps, we introduce the RAQR to the wireless community by presenting an end-to-end reception scheme. We then develop a corresponding equivalent baseband signal model relying on a realistic reception flow. Our scheme and model provide explicit design guidance to RAQR-aided wireless systems. We next study the performance of RAQR-aided wireless systems based on our model, and compare them to classical RF receivers. The results show that Doppler broadening-free RAQRs are capable of achieving a substantial received signal-to-noise ratio (SNR) gain of over 27 decibel (dB) and 40 dB in the photon shot limit and standard quantum limit regimes, respectively.

arXiv:2412.05554•IEEE Transactions on Communications•Jan 1, 2026•26 citations

A System-Level Design Framework for Rydberg-Atom Quantum Receivers: End-to-End Input-Output Modeling, Noise-Aware Sensitivity, and Communication Performance

Weichao Gao, Jinyun Wu, Peiyun Cheng +5 more

Rydberg-atom electrometry promises a radiofrequency (RF) receiver front end with intrinsic self-calibration, all-optical readout, and freedom from conventional antenna constraints. However, existing studies largely address isolated physical effects—local susceptibility, spectral fitting, or a single observable–so a unified engineering description that links device physics to communication performance is still lacking. This work develops a system-level design framework that treats the Rydberg vapor cell as an RF receiver and connects the incident field to the electrical output along a single analytic chain. A closed-form static input–output map is obtained by combining a four-level continued-fraction susceptibility, Beer–Lambert propagation, and direct photodetection. Small-signal linearization yields a thirdorder complex-valued state-space model whose physical transfer function, because the photocurrent is a real projection of a complex coherence, must be assembled from both positive- and negative-frequency resolvent responses—a construction that has no counterpart in real-valued linear systems and is material for bandwidth prediction, which we show can otherwise be misestimated by up to a factor of two to three. A multisource noise model then defines a frequency-dependent minimum detectable field, exposing how static gain, spectral roll-off, and technical noise jointly bound sensitivity. The framework yields explicit reception limits for amplitude, frequency, and on–offkeyed modulation, unifies biased direct detection with superheterodyne operation, provides quantitative engineering design maps for bandwidth, sensitivity, and dynamic range, and is benchmarked against published87Rb and133Cs experiments, reproducing the measured calibration slope to within 2% and the reported bandwidth scale to order of magnitude.

IEEE Transactions on Quantum Engineering•Jan 1, 2026•0 citations

Harnessing Rydberg Atomic Receivers: From Quantum Physics to Wireless Communications

Yuanbin Chen, Xufeng Guo, Chau Yuen +5 more

The intrinsic integration of Rydberg atomic receivers into wireless communication systems is proposed, by harnessing the principles of quantum physics in wireless communications. More particularly, we conceive a pair of Rydberg atomic receivers, one incorporates a local oscillator (LO), referred to as an LO-dressed receiver, while the other operates without an LO and is termed an LO-free receiver. The appropriate wireless model is developed for each configuration, elaborating on the receiver's responses to the radio frequency (RF) signal, on the potential noise sources, and on the signal-to-noise ratio (SNR) performance. The developed wireless model conforms to the classical RF framework, facilitating compatibility with established signal processing methodologies. Next, we investigate the associated distortion effects that might occur, specifically identifying the conditions under which distortion arises and demonstrating the boundaries of linear dynamic ranges. This provides critical insights into its practical implementations in wireless systems. Finally, extensive simulation results are provided for characterizing the performance of wireless systems, harnessing this pair of Rydberg atomic receivers. Our results demonstrate that LO-dressed systems achieve a significant SNR gain of approximately 40~50 dB over conventional RF receivers in the standard quantum limit regime. This SNR head-room translates into reduced symbol error rates, enabling efficient and reliable transmission with higher-order constellations.

arXiv:2501.11842•IEEE Transactions on Wireless Communications•Jan 1, 2026•39 citations

An Equivalent Baseband Signal Model for Rydberg Atomic Quantum Receiver Aided Wireless Communications and Sensing

Tierui Gong, Jiaming Sun, Chau Yuen +6 more

Rydberg atomic quantum receivers (RAQRs) emerge as a radical solution for detecting radio frequency (RF) signals, showing great potential in assisting classical wireless communications and sensing. However, the current studies of RAQRs mainly focus on realizing fundamental functionalities via experiments, where the results cannot be readily harnessed for assisting wireless communications and sensing. Moreover, the advantages of RAQR-based wireless receivers have not been fully characterized. To fill the gap, we introduce the superheterodyne version of RAQRs and present the associated end-to-end transmission scheme. We then develop a corresponding end-to-end equivalent baseband signal model relying on a realistic transmission flow. Our scheme and model provide explicit design guidance for RAQR-aided wireless systems. We finally verify the effectiveness of the proposed signal model with respect to the waveform of the photodetector, input-output relationship (transfer function), and the normalized mean-squared error between the nonlinear transfer function and its linear approximation.

International Conference on Quantum Communications, Networking, and Computing (QCNC)•Mar 31, 2025•4 citations

Hybrid Six-Level Rydberg Atomic Quantum Receiver for Multi-Band Wireless Communications

Lahiru Shyamal, Harini Hapuarachchi, Saman Atapattu +1 more

Rydberg atomic quantum receivers (RAQRs) have recently emerged as a promising technology for radio-frequency (RF) reception by directly transducing incident RF fields into optical signals. Existing receiver architectures, however, exploit only subsets of the dipole-allowed transitions within a given atomic manifold, limiting the number of simultaneously accessible RF channels. In this paper, a hybrid six-level Rydberg atomic quantum receiver (H-RAQR) is proposed by integrating parallel and cascaded RF coupling pathways within a single vapor-cell receiver. A communication-oriented analytical framework is developed by deriving a closed-form steady-state atom--field interaction model and establishing an equivalent baseband signal representation. The achievable ergodic sum rate is analyzed, and a resource-efficiency metric is introduced to quantify throughput per unit optical receiver resource. The analytical model is validated against full Lindblad master-equation simulations over its identified operating region. Numerical results show that the proposed H-RAQR supports four simultaneous RF channels within a single atomic system, achieves higher ergodic sum rate than conventional parallel Rydberg state (PRS) and cascade Rydberg state (CRS) receivers, and provides about 29% higher resource efficiency than a combined PRS-CRS deployment with equivalent four-band coverage. The proposed framework provides a scalable foundation for multi-band atomic wireless receivers.

quant-pharXiv:2604.12106•Apr 15, 2026•1 citation
Rydberg atomic receivers represent a transformative approach to achieving high-sensitivity, broadband, and miniaturized radio frequency (RF) reception. However, existing static signal models for Rydberg atomic receivers rely on the steady-state assumption of atomic quantum states, which cannot fully describe the signal reception process of dynamic signals. To fill in this gap, in this paper, we present a general model to compute the dynamic signal response of Rydberg atomic receivers in closed form. Specifically, by applying small-signal perturbation techniques to the quantum master equation, we derive closed-form Laplace domain transfer functions that characterize the receiver’s dynamic responses to time-varying signal fields. To gain more insights into the quantum-based RF-photocurrent conversion process, we further introduce the concept of quantum transconductance that describes the quantum system as an equivalent classical system. By applying quantum transconductance, we quantify the influence of in-band blackbody radiation (BBR) noise on the atomic receiver sensitivity. Extensive simulations for Rydberg atomic receivers validate the proposed signal model, and demonstrate the possibility of quantum receivers to outperform classical electronic receivers through the improvement of quantum transconductance.
Rydberg atomic quantum receivers represent a transformative approach to achieving high-sensitivity, broadband, and miniaturized radio frequency (RF) reception. However, existing static signal models for Rydberg atomic receivers rely on the steady-state assumption of atomic quantum states, which cannot fully describe the signal reception process of dynamic signals. To fill in this gap, in this paper, we present a transfer function-based model to compute the dynamic signal response of Rydberg atomic receivers in closed form. Specifically, by applying small-signal perturbation techniques to the quantum master equation, we derive closed-form Laplace domain transfer functions that characterize the receiver’s dynamic responses to time-varying signal fields. To gain more insights into the quantum-based RF-photocurrent conversion process, we further introduce the concept of quantum transconductance that describes the quantum system as an equivalent classical system. Simulations for Rydberg atomic receivers validate the proposed signal model, and demonstrate the possibility of quantum receivers to outperform classical electronic receivers through the improvement of quantum transconductance.
The significant progress of quantum sensing technologies offer numerous radical solutions for measuring a multitude of physical quantities at an unprecedented precision. Among them, Rydberg atomic quantum receivers (RAQRs) emerge as an eminent solution for detecting the electric field of radio frequency (RF) signals, exhibiting great potential in assisting classical wireless communications and sensing. So far, most experimental studies have aimed for the proof of physical concepts to reveal its promise, while the practical signal model of RAQR-aided wireless communications and sensing remained under-explored. Furthermore, the performance of RAQR-based wireless receivers and their advantages over classical RF receivers have not been fully characterized. To fill these gaps, we introduce the RAQR to the wireless community by presenting an end-to-end reception scheme. We then develop a corresponding equivalent baseband signal model relying on a realistic reception flow. Our scheme and model provide explicit design guidance to RAQR-aided wireless systems. We next study the performance of RAQR-aided wireless systems based on our model, and compare them to classical RF receivers. The results show that Doppler broadening-free RAQRs are capable of achieving a substantial received signal-to-noise ratio (SNR) gain of over 27 decibel (dB) and 40 dB in the photon shot limit and standard quantum limit regimes, respectively.
Rydberg-atom electrometry promises a radiofrequency (RF) receiver front end with intrinsic self-calibration, all-optical readout, and freedom from conventional antenna constraints. However, existing studies largely address isolated physical effects—local susceptibility, spectral fitting, or a single observable–so a unified engineering description that links device physics to communication performance is still lacking. This work develops a system-level design framework that treats the Rydberg vapor cell as an RF receiver and connects the incident field to the electrical output along a single analytic chain. A closed-form static input–output map is obtained by combining a four-level continued-fraction susceptibility, Beer–Lambert propagation, and direct photodetection. Small-signal linearization yields a thirdorder complex-valued state-space model whose physical transfer function, because the photocurrent is a real projection of a complex coherence, must be assembled from both positive- and negative-frequency resolvent responses—a construction that has no counterpart in real-valued linear systems and is material for bandwidth prediction, which we show can otherwise be misestimated by up to a factor of two to three. A multisource noise model then defines a frequency-dependent minimum detectable field, exposing how static gain, spectral roll-off, and technical noise jointly bound sensitivity. The framework yields explicit reception limits for amplitude, frequency, and on–offkeyed modulation, unifies biased direct detection with superheterodyne operation, provides quantitative engineering design maps for bandwidth, sensitivity, and dynamic range, and is benchmarked against published87Rb and133Cs experiments, reproducing the measured calibration slope to within 2% and the reported bandwidth scale to order of magnitude.
The intrinsic integration of Rydberg atomic receivers into wireless communication systems is proposed, by harnessing the principles of quantum physics in wireless communications. More particularly, we conceive a pair of Rydberg atomic receivers, one incorporates a local oscillator (LO), referred to as an LO-dressed receiver, while the other operates without an LO and is termed an LO-free receiver. The appropriate wireless model is developed for each configuration, elaborating on the receiver's responses to the radio frequency (RF) signal, on the potential noise sources, and on the signal-to-noise ratio (SNR) performance. The developed wireless model conforms to the classical RF framework, facilitating compatibility with established signal processing methodologies. Next, we investigate the associated distortion effects that might occur, specifically identifying the conditions under which distortion arises and demonstrating the boundaries of linear dynamic ranges. This provides critical insights into its practical implementations in wireless systems. Finally, extensive simulation results are provided for characterizing the performance of wireless systems, harnessing this pair of Rydberg atomic receivers. Our results demonstrate that LO-dressed systems achieve a significant SNR gain of approximately 40~50 dB over conventional RF receivers in the standard quantum limit regime. This SNR head-room translates into reduced symbol error rates, enabling efficient and reliable transmission with higher-order constellations.
Rydberg atomic quantum receivers (RAQRs) emerge as a radical solution for detecting radio frequency (RF) signals, showing great potential in assisting classical wireless communications and sensing. However, the current studies of RAQRs mainly focus on realizing fundamental functionalities via experiments, where the results cannot be readily harnessed for assisting wireless communications and sensing. Moreover, the advantages of RAQR-based wireless receivers have not been fully characterized. To fill the gap, we introduce the superheterodyne version of RAQRs and present the associated end-to-end transmission scheme. We then develop a corresponding end-to-end equivalent baseband signal model relying on a realistic transmission flow. Our scheme and model provide explicit design guidance for RAQR-aided wireless systems. We finally verify the effectiveness of the proposed signal model with respect to the waveform of the photodetector, input-output relationship (transfer function), and the normalized mean-squared error between the nonlinear transfer function and its linear approximation.
Rydberg atomic quantum receivers (RAQRs) have recently emerged as a promising technology for radio-frequency (RF) reception by directly transducing incident RF fields into optical signals. Existing receiver architectures, however, exploit only subsets of the dipole-allowed transitions within a given atomic manifold, limiting the number of simultaneously accessible RF channels. In this paper, a hybrid six-level Rydberg atomic quantum receiver (H-RAQR) is proposed by integrating parallel and cascaded RF coupling pathways within a single vapor-cell receiver. A communication-oriented analytical framework is developed by deriving a closed-form steady-state atom--field interaction model and establishing an equivalent baseband signal representation. The achievable ergodic sum rate is analyzed, and a resource-efficiency metric is introduced to quantify throughput per unit optical receiver resource. The analytical model is validated against full Lindblad master-equation simulations over its identified operating region. Numerical results show that the proposed H-RAQR supports four simultaneous RF channels within a single atomic system, achieves higher ergodic sum rate than conventional parallel Rydberg state (PRS) and cascade Rydberg state (CRS) receivers, and provides about 29% higher resource efficiency than a combined PRS-CRS deployment with equivalent four-band coverage. The proposed framework provides a scalable foundation for multi-band atomic wireless receivers.