Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2412.05554 · IEEE Transactions on Communications

Rydberg Atomic Quantum Receivers for Classical Wireless Communications and Sensing: Their Models and Performance

Tierui Gong, Jiaming Sun, Chau Yuen, Guangwei Hu, Yufei Zhao, Yong Liang Guan, Chong Meng Samson See, Merouane Abdelkader Debbah, Lajos Hanzo

Published Jan 1, 2026• 26 citations
arXivHTMLPDF

Abstract

The significant progress of quantum sensing technologies offer numerous radical solutions for measuring a multitude of physical quantities at an unprecedented precision. Among them, Rydberg atomic quantum receivers (RAQRs) emerge as an eminent solution for detecting the electric field of radio frequency (RF) signals, exhibiting great potential in assisting classical wireless communications and sensing. So far, most experimental studies have aimed for the proof of physical concepts to reveal its promise, while the practical signal model of RAQR-aided wireless communications and sensing remained under-explored. Furthermore, the performance of RAQR-based wireless receivers and their advantages over classical RF receivers have not been fully characterized. To fill these gaps, we introduce the RAQR to the wireless community by presenting an end-to-end reception scheme. We then develop a corresponding equivalent baseband signal model relying on a realistic reception flow. Our scheme and model provide explicit design guidance to RAQR-aided wireless systems. We next study the performance of RAQR-aided wireless systems based on our model, and compare them to classical RF receivers. The results show that Doppler broadening-free RAQRs are capable of achieving a substantial received signal-to-noise ratio (SNR) gain of over 27 decibel (dB) and 40 dB in the photon shot limit and standard quantum limit regimes, respectively.

DOI
10.1109/tcomm.2026.3684253

Related papers

An Equivalent Baseband Signal Model for Rydberg Atomic Quantum Receiver Aided Wireless Communications and Sensing

Tierui Gong, Jiaming Sun, Chau Yuen +6 more

Rydberg atomic quantum receivers (RAQRs) emerge as a radical solution for detecting radio frequency (RF) signals, showing great potential in assisting classical wireless communications and sensing. However, the current studies of RAQRs mainly focus on realizing fundamental functionalities via experiments, where the results cannot be readily harnessed for assisting wireless communications and sensing. Moreover, the advantages of RAQR-based wireless receivers have not been fully characterized. To fill the gap, we introduce the superheterodyne version of RAQRs and present the associated end-to-end transmission scheme. We then develop a corresponding end-to-end equivalent baseband signal model relying on a realistic transmission flow. Our scheme and model provide explicit design guidance for RAQR-aided wireless systems. We finally verify the effectiveness of the proposed signal model with respect to the waveform of the photodetector, input-output relationship (transfer function), and the normalized mean-squared error between the nonlinear transfer function and its linear approximation.

International Conference on Quantum Communications, Networking, and Computing (QCNC)•Mar 31, 2025•4 citations

Rydberg Atomic Quantum Receivers for Classical Wireless Communication and Sensing

Tierui Gong, Aveek Chandra, Chau Yuen +5 more

Rydberg atomic quantum receivers (RAQRs) are emerging quantum precision sensing platforms designed for receiving radio frequency (RF) signals. It relies on the creation of Rydberg atoms from normal atoms by exciting one or more electrons to a very high energy level, thereby making the atom sensitive to RF signals. RAQRs realize RF-to-optical conversions based on atom-light interactions relying on the so-called electromagnetically induced transparency (EIT) and Autler- Townes splitting (ATS) so that the desired RF signal can be read out optically. The large dipole moments of Rydberg atoms associated with rich choices of Rydberg states facilitate an ultra-high sensitivity (~nv⁄cm/√Hz) and an ultra-broadband tunability (direct-current to Terahertz). RAQRs also exhibit compelling scalability and lend themselves to the construction of innovative, compact receivers. Initial experimental studies have demonstrated their capabilities in classical wireless communications and sensing. To fully harness their potential in a wide variety of applications, we commence by outlining the underlying fundamentals of Rydberg atoms, followed by the principles and schemes of RAQRs. Then, we overview the state-of-the-art studies from both physics and communication societies. Furthermore, we conceive Rydberg atomic quantum single-input single-output (RAQ-SISO) and multiple-input multiple- output (RAQ-MIMO) schemes to facilitate the integration of RAQRs with classical wireless systems. Finally, we conclude with a set of potent research directions.

arXiv:2409.14501•IEEE Wireless Communications•Apr 21, 2025•57 citations

Harnessing Rydberg Atomic Receivers: From Quantum Physics to Wireless Communications

Yuanbin Chen, Xufeng Guo, Chau Yuen +5 more

The intrinsic integration of Rydberg atomic receivers into wireless communication systems is proposed, by harnessing the principles of quantum physics in wireless communications. More particularly, we conceive a pair of Rydberg atomic receivers, one incorporates a local oscillator (LO), referred to as an LO-dressed receiver, while the other operates without an LO and is termed an LO-free receiver. The appropriate wireless model is developed for each configuration, elaborating on the receiver's responses to the radio frequency (RF) signal, on the potential noise sources, and on the signal-to-noise ratio (SNR) performance. The developed wireless model conforms to the classical RF framework, facilitating compatibility with established signal processing methodologies. Next, we investigate the associated distortion effects that might occur, specifically identifying the conditions under which distortion arises and demonstrating the boundaries of linear dynamic ranges. This provides critical insights into its practical implementations in wireless systems. Finally, extensive simulation results are provided for characterizing the performance of wireless systems, harnessing this pair of Rydberg atomic receivers. Our results demonstrate that LO-dressed systems achieve a significant SNR gain of approximately 40~50 dB over conventional RF receivers in the standard quantum limit regime. This SNR head-room translates into reduced symbol error rates, enabling efficient and reliable transmission with higher-order constellations.

arXiv:2501.11842•IEEE Transactions on Wireless Communications•Jan 1, 2026•39 citations

Rydberg Atomic Quantum Receivers for Multi-Target DOA Estimation

Tierui Gong, Chau Yuen, Chong Meng Samson See +2 more

Quantum sensing technologies have experienced rapid progresses since entering the ‘second quantum revolution’. Among various candidates, schemes relying on Rydberg atoms exhibit compelling advantages for detecting radio frequency signals. Based on this, Rydberg atomic quantum receivers (RAQRs) have emerged as a promising solution to classical wireless communication and sensing. To harness the advantages and exploit the potential of RAQRs in wireless sensing, we investigate the realization of the direction of arrival (DOA) estimation by RAQRs. Specifically, we first conceive a Rydberg atomic quantum uniform linear array (RAQ-ULA) aided wireless receiver for multi-target DOA detection and propose the corresponding signal model of this sensing system. Our model reveals that the presence of the radio-frequency local oscillator in the RAQ-ULA creates sensor gain mismatches, which degrade the DOA estimation significantly by employing the classical Estimation of Signal Parameters via Rotational Invariant Techniques (ESPRIT). To solve this sensor gain mismatch problem, we propose the Rydberg atomic quantum ESPRIT (RAQ-ESPRIT) relying on our model. Lastly, we characterize our scheme through numerical simulations, where the results exhibit that it is capable of reducing the estimation error of its classical counterpart on the order of >$400$- fold and >$9000$- fold in the PSL and SQL, respectively.

arXiv:2501.02820•IEEE Transactions on Vehicular Technology•Dec 17, 2025•18 citations

Rydberg Atomic Quantum Receivers for ISAC: From Indiscriminate Sensitivity to Active Selectivity

Haiying Zhang, Shuyi Chen, Yufei Zhao +4 more

As a key enabler for next-generation wireless systems, integrated sensing and communication (ISAC) requires significantly higher receiver sensitivity than conventional architectures to achieve long-range target detection, thereby introducing new challenges in receiver design. Among potential solutions, Rydberg atomic quantum receivers (RAQRs) have attracted growing attention for their unique quantum sensing capabilities. By exploiting the exceptional responsiveness of Rydberg atoms to electromagnetic fields, RAQRs enable direct and highly sensitive measurement of radio-frequency (RF) signals without relying on traditional antenna-based front ends. However, this enhanced sensitivity also renders them more vulnerable to interference, particularly from undesired targets and long-delay multipath components. To address this limitation, this article presents practical strategies for improving the interference robustness and selective reception performance of RAQRs in ISAC scenarios. Specifically, we begin with a comprehensive overview of RAQR principles and identify the interference-related challenges encountered in ISAC applications. Building on this foundation, we introduce the Actively Selective RAQR (AS-RAQR) architecture, which integrates tunable gating mechanisms to actively suppress unwanted signals. The proposed design is validated through representative case studies, followed by a discussion of open challenges and future research directions.

IEEE Wireless Communications•Jan 1, 2026•0 citations

Rydberg Atomic Quantum Receivers for Wireless Communications: Two-Color Versus Three-Color Excitation

Jian Mei Xiao, Tierui Gong, Ji Wang +2 more

An efficient three-color (3C) laser excitation-based Rydberg atomic quantum receiver (RAQR) architecture is investigated for wireless communications, utilizing a five-level (5L) electronic transition mechanism. Specifically, the conventional two-color (2C) RAQR with the four-level (4L) excitation faces three fundamental obstacles: 1) high cost and engineering challenges due to the reliance on unstable short-wavelength lasers; 2) a fundamental sensitivity limit in thermal atoms caused by residual Doppler broadening; and 3) the inability to detect low-frequency bands due to the energy-level constraint of two-photon resonance. To address these challenges, this paper analyzes a 3C5L-RAQR architecture with all-red/infrared lasers, which not only solves the engineering cost issues but also enables effective Doppler cancellation and low-frequency detection by exploiting the three-photon resonance. Bridging atomic physics and communication theory, an end-to-end equivalent baseband signal model is derived. Furthermore, the performance of different RAQR architectures is evaluated in terms of sensitivity, achievable rate and spectrum access range. Moreover, we provide an exact numerical solution for practical RAQRs by employing the Liouvillian superoperator formalism. Numerical results demonstrate that the exhibited 3C5L-RAQR achieves superior sensitivity compared to the conventional 2C4L-RAQR and a classical antenna-based radio frequency receiver for weak-signal detection. Finally, the inherent sensitivity-rate trade-off is revealed, showing that the 3C5L-RAQR is more suitable for deployment in power-limited communication scenarios demanding broad spectrum access.

arXiv:2603.24062•IEEE Journal on Selected Areas in Communications•Jan 1, 2026•4 citations
The significant progress of quantum sensing technologies offer numerous radical solutions for measuring a multitude of physical quantities at an unprecedented precision. Among them, Rydberg atomic quantum receivers (RAQRs) emerge as an eminent solution for detecting the electric field of radio frequency (RF) signals, exhibiting great potential in assisting classical wireless communications and sensing. So far, most experimental studies have aimed for the proof of physical concepts to reveal its promise, while the practical signal model of RAQR-aided wireless communications and sensing remained under-explored. Furthermore, the performance of RAQR-based wireless receivers and their advantages over classical RF receivers have not been fully characterized. To fill these gaps, we introduce the RAQR to the wireless community by presenting an end-to-end reception scheme. We then develop a corresponding equivalent baseband signal model relying on a realistic reception flow. Our scheme and model provide explicit design guidance to RAQR-aided wireless systems. We next study the performance of RAQR-aided wireless systems based on our model, and compare them to classical RF receivers. The results show that Doppler broadening-free RAQRs are capable of achieving a substantial received signal-to-noise ratio (SNR) gain of over 27 decibel (dB) and 40 dB in the photon shot limit and standard quantum limit regimes, respectively.
Rydberg atomic quantum receivers (RAQRs) emerge as a radical solution for detecting radio frequency (RF) signals, showing great potential in assisting classical wireless communications and sensing. However, the current studies of RAQRs mainly focus on realizing fundamental functionalities via experiments, where the results cannot be readily harnessed for assisting wireless communications and sensing. Moreover, the advantages of RAQR-based wireless receivers have not been fully characterized. To fill the gap, we introduce the superheterodyne version of RAQRs and present the associated end-to-end transmission scheme. We then develop a corresponding end-to-end equivalent baseband signal model relying on a realistic transmission flow. Our scheme and model provide explicit design guidance for RAQR-aided wireless systems. We finally verify the effectiveness of the proposed signal model with respect to the waveform of the photodetector, input-output relationship (transfer function), and the normalized mean-squared error between the nonlinear transfer function and its linear approximation.
Rydberg atomic quantum receivers (RAQRs) are emerging quantum precision sensing platforms designed for receiving radio frequency (RF) signals. It relies on the creation of Rydberg atoms from normal atoms by exciting one or more electrons to a very high energy level, thereby making the atom sensitive to RF signals. RAQRs realize RF-to-optical conversions based on atom-light interactions relying on the so-called electromagnetically induced transparency (EIT) and Autler- Townes splitting (ATS) so that the desired RF signal can be read out optically. The large dipole moments of Rydberg atoms associated with rich choices of Rydberg states facilitate an ultra-high sensitivity (~nv⁄cm/√Hz) and an ultra-broadband tunability (direct-current to Terahertz). RAQRs also exhibit compelling scalability and lend themselves to the construction of innovative, compact receivers. Initial experimental studies have demonstrated their capabilities in classical wireless communications and sensing. To fully harness their potential in a wide variety of applications, we commence by outlining the underlying fundamentals of Rydberg atoms, followed by the principles and schemes of RAQRs. Then, we overview the state-of-the-art studies from both physics and communication societies. Furthermore, we conceive Rydberg atomic quantum single-input single-output (RAQ-SISO) and multiple-input multiple- output (RAQ-MIMO) schemes to facilitate the integration of RAQRs with classical wireless systems. Finally, we conclude with a set of potent research directions.
The intrinsic integration of Rydberg atomic receivers into wireless communication systems is proposed, by harnessing the principles of quantum physics in wireless communications. More particularly, we conceive a pair of Rydberg atomic receivers, one incorporates a local oscillator (LO), referred to as an LO-dressed receiver, while the other operates without an LO and is termed an LO-free receiver. The appropriate wireless model is developed for each configuration, elaborating on the receiver's responses to the radio frequency (RF) signal, on the potential noise sources, and on the signal-to-noise ratio (SNR) performance. The developed wireless model conforms to the classical RF framework, facilitating compatibility with established signal processing methodologies. Next, we investigate the associated distortion effects that might occur, specifically identifying the conditions under which distortion arises and demonstrating the boundaries of linear dynamic ranges. This provides critical insights into its practical implementations in wireless systems. Finally, extensive simulation results are provided for characterizing the performance of wireless systems, harnessing this pair of Rydberg atomic receivers. Our results demonstrate that LO-dressed systems achieve a significant SNR gain of approximately 40~50 dB over conventional RF receivers in the standard quantum limit regime. This SNR head-room translates into reduced symbol error rates, enabling efficient and reliable transmission with higher-order constellations.
Quantum sensing technologies have experienced rapid progresses since entering the ‘second quantum revolution’. Among various candidates, schemes relying on Rydberg atoms exhibit compelling advantages for detecting radio frequency signals. Based on this, Rydberg atomic quantum receivers (RAQRs) have emerged as a promising solution to classical wireless communication and sensing. To harness the advantages and exploit the potential of RAQRs in wireless sensing, we investigate the realization of the direction of arrival (DOA) estimation by RAQRs. Specifically, we first conceive a Rydberg atomic quantum uniform linear array (RAQ-ULA) aided wireless receiver for multi-target DOA detection and propose the corresponding signal model of this sensing system. Our model reveals that the presence of the radio-frequency local oscillator in the RAQ-ULA creates sensor gain mismatches, which degrade the DOA estimation significantly by employing the classical Estimation of Signal Parameters via Rotational Invariant Techniques (ESPRIT). To solve this sensor gain mismatch problem, we propose the Rydberg atomic quantum ESPRIT (RAQ-ESPRIT) relying on our model. Lastly, we characterize our scheme through numerical simulations, where the results exhibit that it is capable of reducing the estimation error of its classical counterpart on the order of >400400400- fold and >900090009000- fold in the PSL and SQL, respectively.
As a key enabler for next-generation wireless systems, integrated sensing and communication (ISAC) requires significantly higher receiver sensitivity than conventional architectures to achieve long-range target detection, thereby introducing new challenges in receiver design. Among potential solutions, Rydberg atomic quantum receivers (RAQRs) have attracted growing attention for their unique quantum sensing capabilities. By exploiting the exceptional responsiveness of Rydberg atoms to electromagnetic fields, RAQRs enable direct and highly sensitive measurement of radio-frequency (RF) signals without relying on traditional antenna-based front ends. However, this enhanced sensitivity also renders them more vulnerable to interference, particularly from undesired targets and long-delay multipath components. To address this limitation, this article presents practical strategies for improving the interference robustness and selective reception performance of RAQRs in ISAC scenarios. Specifically, we begin with a comprehensive overview of RAQR principles and identify the interference-related challenges encountered in ISAC applications. Building on this foundation, we introduce the Actively Selective RAQR (AS-RAQR) architecture, which integrates tunable gating mechanisms to actively suppress unwanted signals. The proposed design is validated through representative case studies, followed by a discussion of open challenges and future research directions.
An efficient three-color (3C) laser excitation-based Rydberg atomic quantum receiver (RAQR) architecture is investigated for wireless communications, utilizing a five-level (5L) electronic transition mechanism. Specifically, the conventional two-color (2C) RAQR with the four-level (4L) excitation faces three fundamental obstacles: 1) high cost and engineering challenges due to the reliance on unstable short-wavelength lasers; 2) a fundamental sensitivity limit in thermal atoms caused by residual Doppler broadening; and 3) the inability to detect low-frequency bands due to the energy-level constraint of two-photon resonance. To address these challenges, this paper analyzes a 3C5L-RAQR architecture with all-red/infrared lasers, which not only solves the engineering cost issues but also enables effective Doppler cancellation and low-frequency detection by exploiting the three-photon resonance. Bridging atomic physics and communication theory, an end-to-end equivalent baseband signal model is derived. Furthermore, the performance of different RAQR architectures is evaluated in terms of sensitivity, achievable rate and spectrum access range. Moreover, we provide an exact numerical solution for practical RAQRs by employing the Liouvillian superoperator formalism. Numerical results demonstrate that the exhibited 3C5L-RAQR achieves superior sensitivity compared to the conventional 2C4L-RAQR and a classical antenna-based radio frequency receiver for weak-signal detection. Finally, the inherent sensitivity-rate trade-off is revealed, showing that the 3C5L-RAQR is more suitable for deployment in power-limited communication scenarios demanding broad spectrum access.