Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Transactions on Quantum Engineering

A System-Level Design Framework for Rydberg-Atom Quantum Receivers: End-to-End Input-Output Modeling, Noise-Aware Sensitivity, and Communication Performance

Weichao Gao, Jinyun Wu, Peiyun Cheng, Bo Wu, Hao Zhang, Fuquan Li, Yinfa Zhang, Jian Yang

Published Jan 1, 2026• 0 citations
Publisher

Abstract

Rydberg-atom electrometry promises a radiofrequency (RF) receiver front end with intrinsic self-calibration, all-optical readout, and freedom from conventional antenna constraints. However, existing studies largely address isolated physical effects—local susceptibility, spectral fitting, or a single observable–so a unified engineering description that links device physics to communication performance is still lacking. This work develops a system-level design framework that treats the Rydberg vapor cell as an RF receiver and connects the incident field to the electrical output along a single analytic chain. A closed-form static input–output map is obtained by combining a four-level continued-fraction susceptibility, Beer–Lambert propagation, and direct photodetection. Small-signal linearization yields a thirdorder complex-valued state-space model whose physical transfer function, because the photocurrent is a real projection of a complex coherence, must be assembled from both positive- and negative-frequency resolvent responses—a construction that has no counterpart in real-valued linear systems and is material for bandwidth prediction, which we show can otherwise be misestimated by up to a factor of two to three. A multisource noise model then defines a frequency-dependent minimum detectable field, exposing how static gain, spectral roll-off, and technical noise jointly bound sensitivity. The framework yields explicit reception limits for amplitude, frequency, and on–offkeyed modulation, unifies biased direct detection with superheterodyne operation, provides quantitative engineering design maps for bandwidth, sensitivity, and dynamic range, and is benchmarked against published87Rb and133Cs experiments, reproducing the measured calibration slope to within 2% and the reported bandwidth scale to order of magnitude.

DOI
10.1109/tqe.2026.3742857

Related papers

Bridging Quantum Physics and Communications: A Tutorial on Rydberg MIMO Receivers for 6G

Xuehui Dong, Robert C. Qiu

Rydberg atomic receivers offer a quantum-optical route for radio-frequency (RF) reception by mapping incident fields to optical transmission changes through electromagnetically induced transparency and Autler-Townes splitting. For communications, however, the central question is not only field sensitivity, but how a nonlinear, often magnitude-based optical readout can be converted into baseband samples suitable for modulation, detection, and multiple-input multiple-output (MIMO) processing. This paper provides a compact tutorial and perspective from a communication-engineering viewpoint. We first summarize the physical readout mechanism and its amplitude-calibrated interpretation, then compare direct, homodyne, and superheterodyne receiver architectures in terms of the baseband information they can recover. We next discuss communication-oriented Rydberg MIMO models based on multi-cell stacking, single-cell multi-beam/array reuse, and inner-vapor interference. Finally, we outline open modeling directions, including intensity-only detection, transmitter-aided linearization, random-matrix-based large-system analysis, and sub-terahertz (THz)/THz atomic-fluorescence imaging.

IEEE/CIC International Conference on Communications in China (ICCC)•Aug 1, 2026•0 citations

Signal-Dependent Shot Noise Modeling of Rydberg Atomic Quantum Receivers: A Design Perspective

Qihao Peng, Qu Luo, Tierui Gong +8 more

In this paper, we develop a communication-oriented complex baseband equivalent model for superheterodyne Rydberg atomic quantum receivers (RAQRs). The model explicitly captures photodetection-induced signal-dependent shot noise and its coupling with the optical operating point. By leveraging an atomic superheterodyne architecture and a strong local oscillator, we construct a complex baseband representation for both the received signal and the signal-dependent shot noise under both direct incoherent optical detection and balanced coherent optical detection. The derived model reveals that the optical operating point jointly determines the normalized effective receive gain and the equivalent noise background, thereby establishing a traceable gain-noise tradeoff governed by system design. More importantly, the proposed model shows that neglecting signal-dependent shot noise may lead to inaccurate operating-point design. Finally, by extending to the multiple-input-multiple-output (MIMO) case, we derive a lower bound on the achievable rate while considering the signal-dependent shot noise. Our analysis \textcolor{black}{reveals} that the non-zero asymptotic rate of RAQ-MIMO and its superiority over conventional RF-MIMO hinge on the normalized noise floor of the RAQ receive chain falling below that of RF MIMO. Simulation results validate our analysis and yield practical, closed-form design guidelines for RAQR front ends, revealing parameter regimes in which RAQ-MIMO outperforms conventional MIMO systems.

arXiv:2605.10350•May 11, 2026•1 citation

BER-Aware Joint Parameter Optimization of Rydberg Atomic Quantum Receivers

Akash Kumar Mandal, Ming Shen

Rydberg-atom quantum receivers (RAQRs) offer highly sensitive RF reception, but their communication performance depends jointly on atomic response, optical transduction, receiver noise, bandwidth, and wireless-channel conditions. This paper develops a BER-aware communication-theoretic framework for superheterodyne RAQR-assisted wireless communication, linking four-level Rydberg-atom dynamics and coherent optical detection to multipath propagation and digital communication performance. Closed-form instantaneous and average SNR and BER expressions are derived for square Gray-coded $M$-QAM over correlated Rayleigh fading. The RAQR operating point is then jointly optimized over atomic, optical, RF, and geometric parameters using analytical block-wise updates within a fixed-point procedure subject to physical and bandwidth constraints. Numerical results demonstrate substantial gains in low-power reception, bandwidth utilization, robustness to detuning, fading and delay spread, outage, and communication coverage compared with conventional, advanced, and fixed-point RAQR receivers. The results demonstrate that BER-aware joint optimization translates the intrinsic sensitivity of Rydberg-atom sensing into tangible communication-level gains.

arXiv:2609.22236•Sep 3, 2026•1 citation

Wideband Quantum Transduction for Rydberg Atomic Receivers Using Six-Wave Mixing

Yuanbin Chen, Chau Yuen, Chong Meng Samson See

This paper investigates a six-wave mixing (SWM)-based Rydberg atomic receiver as a wideband radio frequency (RF)-to-optical quantum transducer. Specifically, we develop an explicit baseband input-output model that bridges the RF-induced atomic coherence to the detected optical readout. Based on the exact detected SWM response, we develop a reduced-order closed-form two-pole low-pass approximation under the near-resonant weak-signal of interest, which provides an analytical insight into how the 3-dB bandwidth is manipulated by the dressed higher-level atomic dynamics and optical/RF parameters. The validity range of this approximation is then quantified to clarify the operating conditions under which this reduced-order model accurately represents the exact SWM response. We further characterize the linear dynamic range by employing the 1-dB compression point (P1dB) and the input-referred third-order intercept point (IIP3), unveiling a communication-compatible characterization of the bandwidth-sensitivity-linearity trade-off. Extensive simulation results demonstrate that SWM can achieve a 3-dB bandwidth of approximately 10 MHz while maintaining favorable linearity and sensitivity under the strict low-pass condition. The comparison with the EIT regime indicates that the two schemes should be treated as complementary rather than universally ordered. From an engineering perspective, the preferred SWM operating region is therefore not the one with the largest bandwidth, but the one that simultaneously provides a large bandwidth, acceptable sensitivity, favorable linearity, and low-pass regularity.

quant-pharXiv:2602.13955•IEEE Journal on Selected Areas in Communications•Feb 17, 2026•5 citations

High-Resolution Quantum Sensing Using Rydberg Atomic Receiver: Principles, Implementations, and Future Prospects

Minze Chen, Tianqi Mao, Zhiao Zhu +9 more

Quantum sensing using Rydberg atoms offers unprecedented opportunities for next-generation radar systems, transcending classical limitations in miniaturization and spectral agility. Implementing this paradigm for radar sensing, this work proposes a quantum-enhanced radar reception architecture enabled by the emerging Rydberg atomic receiver, replacing conventional antenna-to-mixer chains with a centimeter-scale vapor cell. The proposed approach is based on electromagnetically induced transparency with the Autler-Townes splitting enabling direct RF-to-optical downconversion within the atomic medium via an external co-frequency reference. To circumvent the intrinsic bottleneck on instantaneous bandwidth of atomic receiver, we invoke a non-uniform stepped-frequency synthesis strategy combining coarse laser frequency tuning with fine AC-Stark shift compensation. Additionally, we establish a nonlinear response model of the Rydberg atomic homodyne receiver and propose a customized nonlinear compensation method that extends the linear dynamic range by over 7 dB. We develop a compressive sensing algorithm (CS-Rydberg) to suppress noise and mitigate the undersampling problem. Experimentally, we demonstrate a compact prototype achieving centimeter-level ranging precision (RMSE = 1.06 cm) within 1.6-1.9 m. By synthesizing GHz-bandwidth (2.6-3.6 GHz), resolvable target separations down to 15 cm are observed under controlled sparse scenarios. These results not only validate the feasibility of quantum sensing based on Rydberg atomic receivers but also underscore the architecture's inherent scalability: by harnessing the atoms' ultra-broad spectral response, the synthesized bandwidth can be extended well beyond the current range, enabling sub-centimeter resolution in future radar systems while preserving quantum-traceable calibration and a highly simplified front end.

arXiv:2506.11833•IEEE Journal on Selected Areas in Communications•Jan 1, 2026•14 citations

Rydberg Atom RF Sensing: State of the Art, Principles, Metrics, and Roadmaps

Anu Babusenan, Fr´ed´eric Munoz, Jean-Baptiste Qu´elene +1 more

Rydberg-atom-based electrometry provides a quantum, SI-traceable approach to radio-frequency (RF) and microwave electric-field sensing by linking optical spectra to absolute field strength through electromagnetically induced trans parency. Over the past decade, rapid advances in excitation schemes, field-tuning methods, interferometric readout, and cavity-assisted coupling have significantly improved sensitivity, bandwidth, and tunability of Rydberg-based sensors. In parallel, progress in fiber-coupled modules, microfabricated vapor cells, and photonic integration is enabling compact and deployable receiver architectures. This review presents a comprehensive and metrology-oriented synthesis of the physical principles, system architectures, standardized performance metrics, and uncertainty considerations relevant to Rydberg-atom RF sensing. By con solidating diverse developments into a unified performance and evaluation framework, this work provides a critical reference for the design, comparison, and advancement of next-generation quantum RF sensors and standards.

IEEE Sensors Reviews•Jan 1, 2026•1 citation
Rydberg-atom electrometry promises a radiofrequency (RF) receiver front end with intrinsic self-calibration, all-optical readout, and freedom from conventional antenna constraints. However, existing studies largely address isolated physical effects—local susceptibility, spectral fitting, or a single observable–so a unified engineering description that links device physics to communication performance is still lacking. This work develops a system-level design framework that treats the Rydberg vapor cell as an RF receiver and connects the incident field to the electrical output along a single analytic chain. A closed-form static input–output map is obtained by combining a four-level continued-fraction susceptibility, Beer–Lambert propagation, and direct photodetection. Small-signal linearization yields a thirdorder complex-valued state-space model whose physical transfer function, because the photocurrent is a real projection of a complex coherence, must be assembled from both positive- and negative-frequency resolvent responses—a construction that has no counterpart in real-valued linear systems and is material for bandwidth prediction, which we show can otherwise be misestimated by up to a factor of two to three. A multisource noise model then defines a frequency-dependent minimum detectable field, exposing how static gain, spectral roll-off, and technical noise jointly bound sensitivity. The framework yields explicit reception limits for amplitude, frequency, and on–offkeyed modulation, unifies biased direct detection with superheterodyne operation, provides quantitative engineering design maps for bandwidth, sensitivity, and dynamic range, and is benchmarked against published87Rb and133Cs experiments, reproducing the measured calibration slope to within 2% and the reported bandwidth scale to order of magnitude.
Rydberg atomic receivers offer a quantum-optical route for radio-frequency (RF) reception by mapping incident fields to optical transmission changes through electromagnetically induced transparency and Autler-Townes splitting. For communications, however, the central question is not only field sensitivity, but how a nonlinear, often magnitude-based optical readout can be converted into baseband samples suitable for modulation, detection, and multiple-input multiple-output (MIMO) processing. This paper provides a compact tutorial and perspective from a communication-engineering viewpoint. We first summarize the physical readout mechanism and its amplitude-calibrated interpretation, then compare direct, homodyne, and superheterodyne receiver architectures in terms of the baseband information they can recover. We next discuss communication-oriented Rydberg MIMO models based on multi-cell stacking, single-cell multi-beam/array reuse, and inner-vapor interference. Finally, we outline open modeling directions, including intensity-only detection, transmitter-aided linearization, random-matrix-based large-system analysis, and sub-terahertz (THz)/THz atomic-fluorescence imaging.
In this paper, we develop a communication-oriented complex baseband equivalent model for superheterodyne Rydberg atomic quantum receivers (RAQRs). The model explicitly captures photodetection-induced signal-dependent shot noise and its coupling with the optical operating point. By leveraging an atomic superheterodyne architecture and a strong local oscillator, we construct a complex baseband representation for both the received signal and the signal-dependent shot noise under both direct incoherent optical detection and balanced coherent optical detection. The derived model reveals that the optical operating point jointly determines the normalized effective receive gain and the equivalent noise background, thereby establishing a traceable gain-noise tradeoff governed by system design. More importantly, the proposed model shows that neglecting signal-dependent shot noise may lead to inaccurate operating-point design. Finally, by extending to the multiple-input-multiple-output (MIMO) case, we derive a lower bound on the achievable rate while considering the signal-dependent shot noise. Our analysis \textcolor{black}{reveals} that the non-zero asymptotic rate of RAQ-MIMO and its superiority over conventional RF-MIMO hinge on the normalized noise floor of the RAQ receive chain falling below that of RF MIMO. Simulation results validate our analysis and yield practical, closed-form design guidelines for RAQR front ends, revealing parameter regimes in which RAQ-MIMO outperforms conventional MIMO systems.
Rydberg-atom quantum receivers (RAQRs) offer highly sensitive RF reception, but their communication performance depends jointly on atomic response, optical transduction, receiver noise, bandwidth, and wireless-channel conditions. This paper develops a BER-aware communication-theoretic framework for superheterodyne RAQR-assisted wireless communication, linking four-level Rydberg-atom dynamics and coherent optical detection to multipath propagation and digital communication performance. Closed-form instantaneous and average SNR and BER expressions are derived for square Gray-coded MMM-QAM over correlated Rayleigh fading. The RAQR operating point is then jointly optimized over atomic, optical, RF, and geometric parameters using analytical block-wise updates within a fixed-point procedure subject to physical and bandwidth constraints. Numerical results demonstrate substantial gains in low-power reception, bandwidth utilization, robustness to detuning, fading and delay spread, outage, and communication coverage compared with conventional, advanced, and fixed-point RAQR receivers. The results demonstrate that BER-aware joint optimization translates the intrinsic sensitivity of Rydberg-atom sensing into tangible communication-level gains.
This paper investigates a six-wave mixing (SWM)-based Rydberg atomic receiver as a wideband radio frequency (RF)-to-optical quantum transducer. Specifically, we develop an explicit baseband input-output model that bridges the RF-induced atomic coherence to the detected optical readout. Based on the exact detected SWM response, we develop a reduced-order closed-form two-pole low-pass approximation under the near-resonant weak-signal of interest, which provides an analytical insight into how the 3-dB bandwidth is manipulated by the dressed higher-level atomic dynamics and optical/RF parameters. The validity range of this approximation is then quantified to clarify the operating conditions under which this reduced-order model accurately represents the exact SWM response. We further characterize the linear dynamic range by employing the 1-dB compression point (P1dB) and the input-referred third-order intercept point (IIP3), unveiling a communication-compatible characterization of the bandwidth-sensitivity-linearity trade-off. Extensive simulation results demonstrate that SWM can achieve a 3-dB bandwidth of approximately 10 MHz while maintaining favorable linearity and sensitivity under the strict low-pass condition. The comparison with the EIT regime indicates that the two schemes should be treated as complementary rather than universally ordered. From an engineering perspective, the preferred SWM operating region is therefore not the one with the largest bandwidth, but the one that simultaneously provides a large bandwidth, acceptable sensitivity, favorable linearity, and low-pass regularity.
Quantum sensing using Rydberg atoms offers unprecedented opportunities for next-generation radar systems, transcending classical limitations in miniaturization and spectral agility. Implementing this paradigm for radar sensing, this work proposes a quantum-enhanced radar reception architecture enabled by the emerging Rydberg atomic receiver, replacing conventional antenna-to-mixer chains with a centimeter-scale vapor cell. The proposed approach is based on electromagnetically induced transparency with the Autler-Townes splitting enabling direct RF-to-optical downconversion within the atomic medium via an external co-frequency reference. To circumvent the intrinsic bottleneck on instantaneous bandwidth of atomic receiver, we invoke a non-uniform stepped-frequency synthesis strategy combining coarse laser frequency tuning with fine AC-Stark shift compensation. Additionally, we establish a nonlinear response model of the Rydberg atomic homodyne receiver and propose a customized nonlinear compensation method that extends the linear dynamic range by over 7 dB. We develop a compressive sensing algorithm (CS-Rydberg) to suppress noise and mitigate the undersampling problem. Experimentally, we demonstrate a compact prototype achieving centimeter-level ranging precision (RMSE = 1.06 cm) within 1.6-1.9 m. By synthesizing GHz-bandwidth (2.6-3.6 GHz), resolvable target separations down to 15 cm are observed under controlled sparse scenarios. These results not only validate the feasibility of quantum sensing based on Rydberg atomic receivers but also underscore the architecture's inherent scalability: by harnessing the atoms' ultra-broad spectral response, the synthesized bandwidth can be extended well beyond the current range, enabling sub-centimeter resolution in future radar systems while preserving quantum-traceable calibration and a highly simplified front end.
Rydberg-atom-based electrometry provides a quantum, SI-traceable approach to radio-frequency (RF) and microwave electric-field sensing by linking optical spectra to absolute field strength through electromagnetically induced trans parency. Over the past decade, rapid advances in excitation schemes, field-tuning methods, interferometric readout, and cavity-assisted coupling have significantly improved sensitivity, bandwidth, and tunability of Rydberg-based sensors. In parallel, progress in fiber-coupled modules, microfabricated vapor cells, and photonic integration is enabling compact and deployable receiver architectures. This review presents a comprehensive and metrology-oriented synthesis of the physical principles, system architectures, standardized performance metrics, and uncertainty considerations relevant to Rydberg-atom RF sensing. By con solidating diverse developments into a unified performance and evaluation framework, this work provides a critical reference for the design, comparison, and advancement of next-generation quantum RF sensors and standards.