Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2506.16361

Design of Advanced Readout and System-on-Chip Analog Circuits for Quantum Chip

Salmanogli, Ahmad, Zandi, Hesam, Poshti, Mahdi Esmaeili Turan, Eskandari, M. Hossein, Zencir, Ertan, Akbari, Mohsen

Published Jun 19, 2025• 3 citations
arXivHTMLPDF

Abstract

In this work, we design an advanced quantum readout architecture that integrates a four qubit superconducting chip with a novel parametric amplifier ended with analog front-end circuit. Unlike conventional approaches, this design eliminates the need for components such as Purcell filters. Instead, a Josephson Parametric Amplifier is engineered to simultaneously perform quantum-limited signal amplification and suppress qubit energy leakage. The design features a tailored gain profile across C-band, with sharp peaks (24 dB) and troughs (0 dB), enabling qubit frequencies to align with gain minima and resonator frequencies with gain maxima.

DOI
10.48550/arxiv.2506.16361

Related papers

Design of fully integrated 45 nm CMOS system-on-chip receiver for readout of transmon qubit

Ahmad Salmanogli, Amine Bermak

This study presents a comprehensive design approach focusing on quantum chip signal amplification by Josephson parametric amplifiers, and an integrated receiver for detecting ultra-low-level quantum signals. Quantum theory is used to analyze the dynamics of a transmon qubit coupled to a transmission line, entanglement between them, and design a parametric amplifier to amplify the quantum signals. Integration of these quantum devices with a 45 nm CMOS system-on-chip receiver creates a sophisticated blend of quantum and classical elements. The transmon qubit and parametric amplifier as a quantum chip, operating at 10 mK, are evaluated for key quantum metrics such as entanglement, Stoke projector probabilities, and parametric amplifier gain. Simultaneously, the resulting receiver combines high-performance components, including a low-noise amplifier with 0.76 dB noise figure in a broad bandwidth, a sweepable 5.0 GHz sinusoidal wave generator, and a purpose-designed mixer for C-band to zero-intermediate frequency (IF) conversion. An intermediate frequency amplifier with flat 26 dB gain and its low-pass filter property generates a pure sinusoidal wave at zero-IF, suitable for subsequent processing at room temperature. This design achieves a notable balance with low power consumption (∼122 mW), a noise figure less than 0.9 dB, high gain (∼65 dB), a wide bandwidth of 3.6 GHz, and compact dimensions (0.6 × 0.4 mm2). The fully integrated receiver, capable of reading out at least 90 qubits, positions this design for potential applications in quantum computing. Post-simulation validations at room temperature underscore the promising and innovative nature of this approach.

arXiv:2401.04228•AVS Quantum Science•Dec 1, 2025•4 citations

A Fully Integrated CMOS Parametric Amplifier for Cryogenic Qubit Readout

Gabriel López-Pinar, C. Aldea, Santiago Celma +1 more

Scalable quantum computing demands compact, low-power, and ultra-low-noise readout electronics at cryogenic temperatures. This work presents a fully integrated CMOS hybrid-less parametric amplifier for near-qubit preamplification at 5 GHz. Operating in a regime where the pump frequency is close to twice the signal frequency, the amplifier provides 10 dB of gain with reduced sensitivity to the input phase, thereby easing system tuning and minimizing the need for precise synchronization. It also presents effective idler suppression (18.4 dB) and pump isolation (52.8 dB), while eliminating bulky off-chip hybrids or circulators. The design occupies only $0.3 \mathrm{~mm}^{2}$ and consumes 10 mW, enabling full on-chip integration and improved scalability. Although the bandwidth (4.8-5 GHz) is narrower than some prior works, it remains sufficient for narrowband qubit readout, highlighting a practical trade-off between performance, compactness, and system complexity for scalable cryogenic quantum interfaces.

International Conference on Synthesis, Modeling, Analysis and Simulation Methods and Applications to Circuit Design•Jun 1, 2026•1 citation

Towards quantum-noise limited multiplexed microwave readout of qubits

Kevin P. O’Brien, Chris Macklin, David J. Hover +5 more

Coherent circuits based on superconducting elements hold tremendous promise for the practical implementation of quantum information technology: advanced computation, cryptography, and hardware simulation of complex materials systems are envisioned applications. Such circuits are essentially engineered atoms with level transitions in the 4-8 GHz regime; as such “read” and “write” operations are performed with the aid of fast microwave pulses and low-noise amplifiers, respectively. Recent advances in cavity-based superconducting parametric amplifiers have enabled real-time measurement and feedback in one and two qubits. We demonstrate a novel Josephson junction transmission-line based traveling-wave amplifier which employs sub-wavelength phase matching resonators to achieve high gain, several GHz of bandwidth, and near quantum-noise limited performance. Such devices will enable multiplexed qubit readout in integrated architectures comprised of a variety of microwave frequency analog and digital superconducting technologies: signal sources, multiplexers, ADCs, DACs, mixers, and amplifiers.

IEEE MTT-S International Microwave Symposium digest•May 1, 2016•2 citations

Mixerless RFSoC Microwave Signal Generation for Superconducting Circuit Applications

R. Gartmann, Valentin Stumpert, Lukas Scheller +3 more

In the realm of quantum computing and low-temperature detectors, precise signal conditioning is crucial for the effective readout and control of superconducting qubits and sensors. As these technologies evolve, the need for increasingly sophisticated and integrated systems becomes more apparent. This contribution presents the design of a mixer-less analog front-end board optimized for superconducting circuit interfacing. It leverages the capabilities of the Radio-Frequency System-on-Chip (RFSoC) from AMD Xilinx and utilizes software-selectable channel filtering stages, ultimately achieving wide-band signals without analog local oscillator leakage.

IEEE International Conference on Quantum Computing and Engineering (QCE)•Sep 15, 2024•2 citations

Flux-pumped impedance-engineered broadband Josephson parametric amplifier

Joel Grebel, Audrey Bienfait, Étienne Dumur +7 more

Broadband quantum-limited amplifiers play a critical role in the single-shot readout of superconducting qubits, but a popular implementation, the traveling wave parametric amplifier, involves a complex design and fabrication process. Here, we present a simple design for a Josephson parametric amplifier, using a lumped element resonator comprising a superconducting quantum interference device whose useful bandwidth is enhanced with an on-chip impedance-matching circuit. We demonstrate a flux-coupling geometry that maximizes the coupling to the Josephson loop and minimizes spurious excitation of the amplifier resonant circuit. The amplifier, which operates in a flux-pumped mode, is demonstrated with a power gain of more than 20 dB over a bandwidth of about 300 MHz, where approximate noise measurements indicate quantum-limited performance. A procedure is given for optimizing the bandwidth for this kind of amplifier, using a linearized circuit simulation while minimizing non-linearities.

Applied Physics Letters•Apr 5, 2021•54 citations

Superconducting Parametric Amplifiers: Resonator Design and Role in Qubit Readout

Babak Mohammadian

Superconducting parametric amplifiers (SPAs) are critical components for ultralow-noise qubit readout in quantum computing, addressing the critical challenge of amplifying weak quantum signals without introducing noise that degrades coherence and computational fidelity. Unlike classical amplifiers, SPAs can achieve or closely approach quantum-limited performance, specifically the Standard Quantum Limit (SQL) of half a photon of added noise for phase-preserving amplification. The core principle of SPAs relies on parametric amplification, where energy is transferred from a strong pump tone to a weak input signal through non-dissipative nonlinear mixing processes. This is enabled by intrinsic nonlinearities in superconducting materials, primarily kinetic inductance in thin films (e.g., NbTiN, Al) and, more significantly, the Josephson effect in Josephson junctions. These nonlinear elements facilitate frequency mixing (three-wave or four-wave mixing) and can operate in phase-preserving or phase-sensitive amplification modes, with the latter allowing for noise squeezing below the SQL. This chapter emphasizes the significant role of resonator design in determining critical SPA performance metrics such as gain, bandwidth, and noise characteristics. It details both lumped-element (LC) and distributed-element (coplanar waveguide, CPW) resonators, discussing their unique properties, suitability for different frequency ranges, and the importance of achieving high-quality factors (Q) for efficient energy storage and minimal loss. A practical design and simulation of a meandered quarterwavelength CPW resonator coupled to a feed line is presented, illustrating how precise control over geometric parameters optimizes resonant frequency, coupling strength, and quality factor for high-fidelity qubit state discrimination.

quant-pharXiv:2511.20097•IntechOpen eBooks•Nov 26, 2025•1 citation
In this work, we design an advanced quantum readout architecture that integrates a four qubit superconducting chip with a novel parametric amplifier ended with analog front-end circuit. Unlike conventional approaches, this design eliminates the need for components such as Purcell filters. Instead, a Josephson Parametric Amplifier is engineered to simultaneously perform quantum-limited signal amplification and suppress qubit energy leakage. The design features a tailored gain profile across C-band, with sharp peaks (24 dB) and troughs (0 dB), enabling qubit frequencies to align with gain minima and resonator frequencies with gain maxima.
This study presents a comprehensive design approach focusing on quantum chip signal amplification by Josephson parametric amplifiers, and an integrated receiver for detecting ultra-low-level quantum signals. Quantum theory is used to analyze the dynamics of a transmon qubit coupled to a transmission line, entanglement between them, and design a parametric amplifier to amplify the quantum signals. Integration of these quantum devices with a 45 nm CMOS system-on-chip receiver creates a sophisticated blend of quantum and classical elements. The transmon qubit and parametric amplifier as a quantum chip, operating at 10 mK, are evaluated for key quantum metrics such as entanglement, Stoke projector probabilities, and parametric amplifier gain. Simultaneously, the resulting receiver combines high-performance components, including a low-noise amplifier with 0.76 dB noise figure in a broad bandwidth, a sweepable 5.0 GHz sinusoidal wave generator, and a purpose-designed mixer for C-band to zero-intermediate frequency (IF) conversion. An intermediate frequency amplifier with flat 26 dB gain and its low-pass filter property generates a pure sinusoidal wave at zero-IF, suitable for subsequent processing at room temperature. This design achieves a notable balance with low power consumption (∼122 mW), a noise figure less than 0.9 dB, high gain (∼65 dB), a wide bandwidth of 3.6 GHz, and compact dimensions (0.6 × 0.4 mm2). The fully integrated receiver, capable of reading out at least 90 qubits, positions this design for potential applications in quantum computing. Post-simulation validations at room temperature underscore the promising and innovative nature of this approach.
Scalable quantum computing demands compact, low-power, and ultra-low-noise readout electronics at cryogenic temperatures. This work presents a fully integrated CMOS hybrid-less parametric amplifier for near-qubit preamplification at 5 GHz. Operating in a regime where the pump frequency is close to twice the signal frequency, the amplifier provides 10 dB of gain with reduced sensitivity to the input phase, thereby easing system tuning and minimizing the need for precise synchronization. It also presents effective idler suppression (18.4 dB) and pump isolation (52.8 dB), while eliminating bulky off-chip hybrids or circulators. The design occupies only 0.3 mm20.3 \mathrm{~mm}^{2}0.3 mm2 and consumes 10 mW, enabling full on-chip integration and improved scalability. Although the bandwidth (4.8-5 GHz) is narrower than some prior works, it remains sufficient for narrowband qubit readout, highlighting a practical trade-off between performance, compactness, and system complexity for scalable cryogenic quantum interfaces.
Coherent circuits based on superconducting elements hold tremendous promise for the practical implementation of quantum information technology: advanced computation, cryptography, and hardware simulation of complex materials systems are envisioned applications. Such circuits are essentially engineered atoms with level transitions in the 4-8 GHz regime; as such “read” and “write” operations are performed with the aid of fast microwave pulses and low-noise amplifiers, respectively. Recent advances in cavity-based superconducting parametric amplifiers have enabled real-time measurement and feedback in one and two qubits. We demonstrate a novel Josephson junction transmission-line based traveling-wave amplifier which employs sub-wavelength phase matching resonators to achieve high gain, several GHz of bandwidth, and near quantum-noise limited performance. Such devices will enable multiplexed qubit readout in integrated architectures comprised of a variety of microwave frequency analog and digital superconducting technologies: signal sources, multiplexers, ADCs, DACs, mixers, and amplifiers.
In the realm of quantum computing and low-temperature detectors, precise signal conditioning is crucial for the effective readout and control of superconducting qubits and sensors. As these technologies evolve, the need for increasingly sophisticated and integrated systems becomes more apparent. This contribution presents the design of a mixer-less analog front-end board optimized for superconducting circuit interfacing. It leverages the capabilities of the Radio-Frequency System-on-Chip (RFSoC) from AMD Xilinx and utilizes software-selectable channel filtering stages, ultimately achieving wide-band signals without analog local oscillator leakage.
Broadband quantum-limited amplifiers play a critical role in the single-shot readout of superconducting qubits, but a popular implementation, the traveling wave parametric amplifier, involves a complex design and fabrication process. Here, we present a simple design for a Josephson parametric amplifier, using a lumped element resonator comprising a superconducting quantum interference device whose useful bandwidth is enhanced with an on-chip impedance-matching circuit. We demonstrate a flux-coupling geometry that maximizes the coupling to the Josephson loop and minimizes spurious excitation of the amplifier resonant circuit. The amplifier, which operates in a flux-pumped mode, is demonstrated with a power gain of more than 20 dB over a bandwidth of about 300 MHz, where approximate noise measurements indicate quantum-limited performance. A procedure is given for optimizing the bandwidth for this kind of amplifier, using a linearized circuit simulation while minimizing non-linearities.
Superconducting parametric amplifiers (SPAs) are critical components for ultralow-noise qubit readout in quantum computing, addressing the critical challenge of amplifying weak quantum signals without introducing noise that degrades coherence and computational fidelity. Unlike classical amplifiers, SPAs can achieve or closely approach quantum-limited performance, specifically the Standard Quantum Limit (SQL) of half a photon of added noise for phase-preserving amplification. The core principle of SPAs relies on parametric amplification, where energy is transferred from a strong pump tone to a weak input signal through non-dissipative nonlinear mixing processes. This is enabled by intrinsic nonlinearities in superconducting materials, primarily kinetic inductance in thin films (e.g., NbTiN, Al) and, more significantly, the Josephson effect in Josephson junctions. These nonlinear elements facilitate frequency mixing (three-wave or four-wave mixing) and can operate in phase-preserving or phase-sensitive amplification modes, with the latter allowing for noise squeezing below the SQL. This chapter emphasizes the significant role of resonator design in determining critical SPA performance metrics such as gain, bandwidth, and noise characteristics. It details both lumped-element (LC) and distributed-element (coplanar waveguide, CPW) resonators, discussing their unique properties, suitability for different frequency ranges, and the importance of achieving high-quality factors (Q) for efficient energy storage and minimal loss. A practical design and simulation of a meandered quarterwavelength CPW resonator coupled to a feed line is presented, illustrating how precise control over geometric parameters optimizes resonant frequency, coupling strength, and quality factor for high-fidelity qubit state discrimination.