Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2503.07455 · Physical Review A

Optimal connectivity from idle-qubit residual-coupling crosstalk in a cavity-mediated entangling gate

Andrea Mammola, M. M. Desjardins, Q. Schaeverbeke

Published Apr 28, 2025• 5 citations
arXivHTMLPDF

Abstract

Quantum processors operated through long-range interaction mediated by a microwave resonator have been envisioned to allow for high connectivity. The ability to selectively operate qubits rely on the possibility to dynamically suppress the coupling between each qubit and the resonator, however, there always remains a residual coupling. In this article, we investigate the effect of high processor connectivity on average two-qubit gate fidelity in a cavity-based architecture with tunable coupling. Via a perturbative approach, we quantify the crosstalk errors from transverse residual couplings and show that they scale as n m 2 where n is the number of idle qubits and m is the ratio between the transverse residual and active couplings. Setting an error threshold E thr , we demonstrate that crosstalks restrict the hardware topology and prevent the full use of all-to-all connectivity. We predict that the maximum number of qubits allowed by E thr scales as n ∝ E thr / m 2 .

DOI
10.1103/physreva.111.042621

Related papers

A cavity-mediated reconfigurable coupling scheme for superconducting qubits

Shinyoung Hwang, Sangyeon Lee, Eunjong Kim

Superconducting qubits have achieved remarkable progress in gate fidelity and coherence, yet their typical nearest-neighbor connectivity presents constraints for implementing complex quantum circuits. Here, we introduce a cavity-mediated coupling architecture in which a shared cavity mode, accessed through tunable qubit-cavity couplers, enables dynamically reconfigurable interactions between non-adjacent qubits. By selectively activating the couplers, we demonstrate that high-fidelity iSWAP and CZ gates can be performed within 50 ns with simulated coherent error below $10^{-4}$, while residual $ZZ$ interaction during idling remains below a few kilohertz. Extending to a four-qubit system, we also simulate gates between every qubit pair by selectively enabling the couplers with low qubit crosstalk. This approach provides a practical route toward enhanced interaction flexibility in superconducting quantum processors and may serve as a useful building block for devices that benefit from selective non-local coupling.

quant-pharXiv:2602.08869•Applied Physics Letters•Feb 10, 2026•0 citations

Quantum Crosstalk Analysis for Simultaneous Gate Operations on Superconducting Qubits

Peng Zhao, Kehuan Linghu, Zhiyuan Li +5 more

Maintaining or even improving gate performance with growing numbers of parallel controlled qubits is a vital requirement for fault-tolerant quantum computing.For superconducting quantum processors, though isolated one-or two-qubit gates have been demonstrated with high fidelity, implementing these gates in parallel commonly shows worse performance.Generally, this degradation is attributed to various crosstalks between qubits, such as quantum crosstalk due to residual inter-qubit coupling.An understanding of the exact nature of these crosstalks is critical to figuring out respective mitigation schemes and improved qubit architecture designs with low crosstalk.Here we give a theoretical analysis of quantum crosstalk impact on simultaneous gate operations in a qubit architecture, where fixed-frequency transmon qubits are coupled via a tunable bus, and sub-100-ns controlled-Z (CZ) gates can be realized by applying a baseband flux pulse on the bus.Our analysis shows that for microwave-driven single-qubit gates, the dressing from the qubit-qubit coupling can cause non-negligible cross-driving errors when qubits operate near frequency collision regions.During CZ gate operations, although unwanted nearest-neighbor interactions are nominally turned off, sub-MHz parasitic next-nearest-neighbor interactions involving spectator qubits can still exist, causing considerable leakage or control error when one operates qubit systems around these parasitic resonance points.To ensure high-fidelity simultaneous operations, a request could be raised to figure out a better way to balance the gate error from target qubit systems themselves and the error from nonparticipating spectator qubits.Overall, our analysis suggests that towards useful quantum processors, the qubit architecture should be examined carefully in the context of high-fidelity simultaneous gate operations in a scalable qubit lattice.

arXiv:2110.12570•PRX Quantum•Apr 1, 2022•133 citations

Scalable Suppression of XY Crosstalk by Pulse-Level Control in Superconducting Quantum Processors

Hui-Hang Chen, Chiao-Hsuan Wang

As superconducting quantum processors continue to scale, high-performance quantum control becomes increasingly critical. In densely integrated architectures, unwanted interactions between nearby qubits give rise to crosstalk errors that limit operational performance. In particular, direct exchange-type (XY) interactions are typically minimized by designing large frequency detunings between neighboring qubits at the hardware level. However, frequency crowding in large-scale systems ultimately restricts the achievable frequency separation. While such XY coupling facilitates entangling gate operations, its residual presence poses a key challenge during single-qubit controls. Here, we propose a scalable pulse-level control framework, incorporating frequency modulation (FM) and dynamical decoupling (DD), to suppress XY crosstalk errors. This framework operates independently of coupling strengths, reducing calibration overhead and naturally supporting multi-qubit connectivity. Numerical simulations show orders-of-magnitude reductions in infidelity for both idle and single-qubit gates in a two-qubit system. We further validate scalability in a five-qubit layout, where crosstalk between a central qubit and four neighbors is simultaneously suppressed. Our crosstalk suppression framework provides a practical route toward high-fidelity operation in dense superconducting architectures.

quant-pharXiv:2601.05231•Physical Review Applied•Jan 9, 2026•1 citation

Long-distance photon-mediated and short-distance entangling gates in three-qubit quantum dot spin systems

Nooshin M. Estakhri, Ada Warren, Sophia E. Economou +1 more

Superconducting resonator couplers will likely become an essential component in modular semiconductor quantum dot (QD) spin qubit processors, as they help alleviate crosstalk and wiring issues as the number of qubits increases. Here, we focus on a three-qubit system composed of two modules: a two-electron triple QD resonator coupled to a single-electron double QD. Using a combination of analytical techniques and numerical results, we derive an effective Hamiltonian that describes the three-qubit logical subspace and show that it accurately captures the dynamics of the system. We examine the performance of short-range and long-range entangling gates, revealing the effect of a spectator qubit in reducing the gate fidelities in both cases. We further study the competition between nonadiabatic errors and spectator-associated errors in short-range operations and quantify their relative importance across practical parameter ranges for short and long gate times. We also analyze the impact of charge noise together with residual coupling to the spectator qubit on intermodule entangling gates and find that for current experimental settings, leakage errors are the main source of infidelities in these operations. Our results help pave the way toward identifying optimal modular QD architectures for quantum information processing on semiconductor chips. Published by the American Physical Society 2024

arXiv:2307.13523•Physical Review Research•Oct 11, 2024•6 citations

A double-resonator coupler for high-fidelity two-qubit gates between superconducting qubits

Seunghyeon Jin, Seungha Woo, Shinyoung Hwang +6 more

Tunable couplers have enabled two-qubit gate fidelities in superconducting quantum processors to approach $99.9\%$, yet simultaneously suppressing residual interactions and maintaining flexible qubit-frequency allocation remain central challenges for scaling. Here, we propose a double-resonator coupler (DRC) consisting of two resonators interconnected by a single Josephson junction and a capacitor. The hybridized resonator modes provide two mediated exchange paths whose interference controls the qubit-qubit interaction. The DRC enables complete cancellation of residual $ZZ$ interaction for qubit-qubit detunings well outside the straddling regime, even without direct inter-qubit capacitance, thereby relaxing constraints on frequency allocation and qubit placement. Away from the idle point, the same circuit provides a strong $ZZ$ interaction of approximately $70\,\mathrm{MHz}$, enabling a $20\,\mathrm{ns}$ controlled-Z gate with simulated coherent infidelity below $10^{-5}$. These results establish the DRC as a flexible single-junction coupler architecture for high-fidelity superconducting quantum processors.

quant-pharXiv:2609.05222•Sep 7, 2026•0 citations

Mitigating crosstalk errors for simultaneous single-qubit gates on a superconducting quantum processor

Jaap J. Wesdorp, Eric Hyyppä, Joona Andersson +61 more

Single-qubit gates on superconducting quantum processors are typically implemented using microwave pulses applied through dedicated control lines. However, these microwave pulses may also drive other qubits due to crosstalk arising from capacitive coupling and wavefunction overlap in systems with closely spaced transition frequencies. Crosstalk and frequency crowding increase errors during simultaneous single-qubit operations relative to isolated gates, thus forming a major bottleneck for scaling superconducting quantum processors. In this work, we combine model-based qubit frequency optimization with pulse shaping to demonstrate crosstalk error mitigation in single-qubit gates on a 49-qubit superconducting quantum processor. We introduce and experimentally verify an analytical model of simultaneous single-qubit gate error caused by microwave crosstalk that depends on a given pulse shape. By employing a model-based optimization strategy of qubit frequencies, we minimize the crosstalk-induced error across the processor and achieve a mean simultaneous single-qubit gate fidelity of 99.96% for a 16-ns gate duration, approaching the mean individual gate fidelity. To further reduce the simultaneous error and required qubit frequency bandwidth on high-crosstalk qubit pairs, we introduce a crosstalk transition suppression (CTS) pulse shaping technique that minimizes the spectral energy around transitions inducing leakage and crosstalk errors. Finally, we combine CTS with model-based frequency optimization across the device and experimentally show a systematic reduction in the required qubit frequency bandwidth for high-fidelity simultaneous gates, supported by simulations of systems with up to 1000 qubits. By alleviating constraints on qubit frequency bandwidth for parallel single-qubit operations, this work represents an important step for scaling towards larger quantum processors.

quant-pharXiv:2603.11018•PRX Quantum•Mar 12, 2026•15 citations
Quantum processors operated through long-range interaction mediated by a microwave resonator have been envisioned to allow for high connectivity. The ability to selectively operate qubits rely on the possibility to dynamically suppress the coupling between each qubit and the resonator, however, there always remains a residual coupling. In this article, we investigate the effect of high processor connectivity on average two-qubit gate fidelity in a cavity-based architecture with tunable coupling. Via a perturbative approach, we quantify the crosstalk errors from transverse residual couplings and show that they scale as n m 2 where n is the number of idle qubits and m is the ratio between the transverse residual and active couplings. Setting an error threshold E thr , we demonstrate that crosstalks restrict the hardware topology and prevent the full use of all-to-all connectivity. We predict that the maximum number of qubits allowed by E thr scales as n ∝ E thr / m 2 .
Superconducting qubits have achieved remarkable progress in gate fidelity and coherence, yet their typical nearest-neighbor connectivity presents constraints for implementing complex quantum circuits. Here, we introduce a cavity-mediated coupling architecture in which a shared cavity mode, accessed through tunable qubit-cavity couplers, enables dynamically reconfigurable interactions between non-adjacent qubits. By selectively activating the couplers, we demonstrate that high-fidelity iSWAP and CZ gates can be performed within 50 ns with simulated coherent error below 10−410^{-4}10−4, while residual ZZZZZZ interaction during idling remains below a few kilohertz. Extending to a four-qubit system, we also simulate gates between every qubit pair by selectively enabling the couplers with low qubit crosstalk. This approach provides a practical route toward enhanced interaction flexibility in superconducting quantum processors and may serve as a useful building block for devices that benefit from selective non-local coupling.
Maintaining or even improving gate performance with growing numbers of parallel controlled qubits is a vital requirement for fault-tolerant quantum computing.For superconducting quantum processors, though isolated one-or two-qubit gates have been demonstrated with high fidelity, implementing these gates in parallel commonly shows worse performance.Generally, this degradation is attributed to various crosstalks between qubits, such as quantum crosstalk due to residual inter-qubit coupling.An understanding of the exact nature of these crosstalks is critical to figuring out respective mitigation schemes and improved qubit architecture designs with low crosstalk.Here we give a theoretical analysis of quantum crosstalk impact on simultaneous gate operations in a qubit architecture, where fixed-frequency transmon qubits are coupled via a tunable bus, and sub-100-ns controlled-Z (CZ) gates can be realized by applying a baseband flux pulse on the bus.Our analysis shows that for microwave-driven single-qubit gates, the dressing from the qubit-qubit coupling can cause non-negligible cross-driving errors when qubits operate near frequency collision regions.During CZ gate operations, although unwanted nearest-neighbor interactions are nominally turned off, sub-MHz parasitic next-nearest-neighbor interactions involving spectator qubits can still exist, causing considerable leakage or control error when one operates qubit systems around these parasitic resonance points.To ensure high-fidelity simultaneous operations, a request could be raised to figure out a better way to balance the gate error from target qubit systems themselves and the error from nonparticipating spectator qubits.Overall, our analysis suggests that towards useful quantum processors, the qubit architecture should be examined carefully in the context of high-fidelity simultaneous gate operations in a scalable qubit lattice.
As superconducting quantum processors continue to scale, high-performance quantum control becomes increasingly critical. In densely integrated architectures, unwanted interactions between nearby qubits give rise to crosstalk errors that limit operational performance. In particular, direct exchange-type (XY) interactions are typically minimized by designing large frequency detunings between neighboring qubits at the hardware level. However, frequency crowding in large-scale systems ultimately restricts the achievable frequency separation. While such XY coupling facilitates entangling gate operations, its residual presence poses a key challenge during single-qubit controls. Here, we propose a scalable pulse-level control framework, incorporating frequency modulation (FM) and dynamical decoupling (DD), to suppress XY crosstalk errors. This framework operates independently of coupling strengths, reducing calibration overhead and naturally supporting multi-qubit connectivity. Numerical simulations show orders-of-magnitude reductions in infidelity for both idle and single-qubit gates in a two-qubit system. We further validate scalability in a five-qubit layout, where crosstalk between a central qubit and four neighbors is simultaneously suppressed. Our crosstalk suppression framework provides a practical route toward high-fidelity operation in dense superconducting architectures.
Superconducting resonator couplers will likely become an essential component in modular semiconductor quantum dot (QD) spin qubit processors, as they help alleviate crosstalk and wiring issues as the number of qubits increases. Here, we focus on a three-qubit system composed of two modules: a two-electron triple QD resonator coupled to a single-electron double QD. Using a combination of analytical techniques and numerical results, we derive an effective Hamiltonian that describes the three-qubit logical subspace and show that it accurately captures the dynamics of the system. We examine the performance of short-range and long-range entangling gates, revealing the effect of a spectator qubit in reducing the gate fidelities in both cases. We further study the competition between nonadiabatic errors and spectator-associated errors in short-range operations and quantify their relative importance across practical parameter ranges for short and long gate times. We also analyze the impact of charge noise together with residual coupling to the spectator qubit on intermodule entangling gates and find that for current experimental settings, leakage errors are the main source of infidelities in these operations. Our results help pave the way toward identifying optimal modular QD architectures for quantum information processing on semiconductor chips. Published by the American Physical Society 2024
Tunable couplers have enabled two-qubit gate fidelities in superconducting quantum processors to approach 99.9%99.9\%99.9%, yet simultaneously suppressing residual interactions and maintaining flexible qubit-frequency allocation remain central challenges for scaling. Here, we propose a double-resonator coupler (DRC) consisting of two resonators interconnected by a single Josephson junction and a capacitor. The hybridized resonator modes provide two mediated exchange paths whose interference controls the qubit-qubit interaction. The DRC enables complete cancellation of residual ZZZZZZ interaction for qubit-qubit detunings well outside the straddling regime, even without direct inter-qubit capacitance, thereby relaxing constraints on frequency allocation and qubit placement. Away from the idle point, the same circuit provides a strong ZZZZZZ interaction of approximately 70 MHz70\,\mathrm{MHz}70MHz, enabling a 20 ns20\,\mathrm{ns}20ns controlled-Z gate with simulated coherent infidelity below 10−510^{-5}10−5. These results establish the DRC as a flexible single-junction coupler architecture for high-fidelity superconducting quantum processors.
Single-qubit gates on superconducting quantum processors are typically implemented using microwave pulses applied through dedicated control lines. However, these microwave pulses may also drive other qubits due to crosstalk arising from capacitive coupling and wavefunction overlap in systems with closely spaced transition frequencies. Crosstalk and frequency crowding increase errors during simultaneous single-qubit operations relative to isolated gates, thus forming a major bottleneck for scaling superconducting quantum processors. In this work, we combine model-based qubit frequency optimization with pulse shaping to demonstrate crosstalk error mitigation in single-qubit gates on a 49-qubit superconducting quantum processor. We introduce and experimentally verify an analytical model of simultaneous single-qubit gate error caused by microwave crosstalk that depends on a given pulse shape. By employing a model-based optimization strategy of qubit frequencies, we minimize the crosstalk-induced error across the processor and achieve a mean simultaneous single-qubit gate fidelity of 99.96% for a 16-ns gate duration, approaching the mean individual gate fidelity. To further reduce the simultaneous error and required qubit frequency bandwidth on high-crosstalk qubit pairs, we introduce a crosstalk transition suppression (CTS) pulse shaping technique that minimizes the spectral energy around transitions inducing leakage and crosstalk errors. Finally, we combine CTS with model-based frequency optimization across the device and experimentally show a systematic reduction in the required qubit frequency bandwidth for high-fidelity simultaneous gates, supported by simulations of systems with up to 1000 qubits. By alleviating constraints on qubit frequency bandwidth for parallel single-qubit operations, this work represents an important step for scaling towards larger quantum processors.