Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2501.05355

Blind calibration of a quantum computer

Liam Jeanette, Jadwiga Wilkens, Ingo Roth, Anton T. Than, Alaina Green, Dominik Hangleiter, Norbert M. Linke

Published Jan 9, 2025• 3 citations
arXivHTMLPDF

Abstract

The calibration of quantum measurements is limited by the ability to accurately prepare quantum states under unknown device errors. We develop an accurate calibration protocol for the measurement apparatus of a quantum computer that is `blind' to the state preparation. Blind calibration quantifies and corrects measurement errors from simple tomographic data on a noisy quantum state. Importantly, it calibrates multiple error mechanisms in a single experiment, eliminating the need for bespoke, separate calibration experiments. Using a trapped-ion quantum computer, we systematically demonstrate the accuracy of the method. We use blind calibration to estimate the native calibration parameters of the experimental system. The recovered calibrations are consistent with directly measured values and perform similarly in predicting the state properties.

DOI
10.48550/arxiv.2501.05355

Related papers

Semi-device-dependent blind quantum tomography

Ingo Roth, Jadwiga Wilkens, Dominik Hangleiter +1 more

Extracting tomographic information about quantum states is a crucial task in the quest towards devising high-precision quantum devices. Current schemes typically require measurement devices for tomography that are a priori calibrated to high precision. Ironically, the accuracy of the measurement calibration is fundamentally limited by the accuracy of state preparation, establishing a vicious cycle. Here, we prove that this cycle can be broken and the dependence on the measurement device's calibration significantly relaxed. We show that exploiting the natural low-rank structure of quantum states of interest suffices to arrive at a highly scalable `blind' tomography scheme with a classically efficient post-processing algorithm. We further improve the efficiency of our scheme by making use of the sparse structure of the calibrations. This is achieved by relaxing the blind quantum tomography problem to the de-mixing of a sparse sum of low-rank matrices. We prove that the proposed algorithm recovers a low-rank quantum state and the calibration provided that the measurement model exhibits a restricted isometry property. For generic measurements, we show that it requires a close-to-optimal number of measurement settings. Complementing these conceptual and mathematical insights, we numerically demonstrate that robust blind quantum tomography is possible in a practical setting inspired by an implementation of trapped ions.

arXiv:2006.03069•Quantum•Jul 11, 2023•11 citations

Calibration of syndrome measurements in a single experiment

Christian L. Wimmer, Jochen Szangolies, Michael Epping

Abstract Quantum error correction can reduce the effects of noise in quantum systems, e.g. in metrology or most notably in quantum computing. Typically, this requires making measurements that provide information about the errors that have occurred in the system. However, these syndrome measurements themselves introduce noise into the system, for example by using noisy gates. A complete characterization of the measurements is very costly. Here we describe a calibration method to obtain the syndrome statistics taking into account the additional noise sources. All calibration data are extracted from a single experiment in which the syndrome measurement is performed twice in a row. Thus, our method allows an accurate evaluation of syndrome measurements with significantly less effort than existing methods. We give examples of the application of this method to noise estimation and error correction. Finally, we discuss the results of experiments performed on an IBM quantum computer.

arXiv:2305.03004•New Journal of Physics•Nov 28, 2024•3 citations

Enhancing Protocol Privacy With Blind Calibration of Quantum Devices

Ankit Khandelwal, Stephen DiAdamo

To mitigate the noise in quantum channels, calibration is used to tune the devices to minimize error. Generally, calibration is performed by transmitting pre-agreed-upon calibration states and determining an error cost so the two parties can tune their devices accordingly. The calibration states can be the same ones used for the desired protocol, and so an untrusted party could potentially learn which protocol is being performed by gathering knowledge of the calibration states and cost function. Here, we assume privacy of the protocol is the goal and therefore the receiver should not be allowed to determine the protocol states. We limit the information that is revealed to the receiver, and in this regard, we propose a simple protocol that hides the calibration states and cost function from the receiver, but still allows for calibration to be performed efficiently, thereby increasing the privacy of the protocol. We show various numerical results demonstrating the ability of the protocol under various channel noise parameters and communication scenarios.

arXiv:2209.05634•IEEE Communications Letters•Jan 11, 2023•3 citations

Proper error bars for self-calibrating quantum tomography

Jun Yan Sim, Jiangwei Shang, Hui Khoon Ng +1 more

Self-calibrating quantum state tomography aims at reconstructing the unknown quantum state and certain properties of the measurement devices from the same data. Since the estimates of the state and device parameters come from the same data, one should employ a joint estimation scheme, including the construction and reporting of joint state-device error regions, to quantify uncertainty. We explain how to do this naturally within the framework of optimal error regions. As an illustrative example, we apply our procedure to the double-crosshair measurement of the BB84 scenario in quantum cryptography and so reconstruct the state and estimate the detection efficiencies simultaneously and reliably. We also discuss the practical situation of a satellite-based quantum key distribution scheme, for which self-calibration and proper treatment of the data are necessities.

arXiv:1904.11202•Physical Review A•Aug 26, 2019•11 citations

Fast-feedback protocols for calibration and drift control in quantum computers

Alicia B. Magann, Nathan E. Miller, Robin Blume-Kohout +2 more

We introduce two classes of lightweight, adaptive calibration protocols for quantum computers that leverage fast feedback. The first enables shot-by-shot updates to device parameters using measurement outcomes from simple, indefinite-outcome quantum circuits. This low-latency approach supports rapid tuning of one or more parameters in real time to mitigate drift. The second protocol updates parameters after collecting measurements from definite-outcome circuits (e.g.~syndrome extraction circuits for quantum error correction), balancing efficiency with classical control overheads. We use numerical simulations to demonstrate that both methods can calibrate 1- and 2-qubit gates rapidly and accurately even in the presence of decoherence, state preparation and measurement (SPAM) errors, and parameter drift. We propose and demonstrate effective adaptive strategies for tuning the hyperparameters of both protocols. Finally, we demonstrate the feasibility of real-time in-situ calibration of qubits performing quantum error correction, using only syndrome data, via numerical simulations of syndrome extraction in the [[5,1,3]] code.

quant-pharXiv:2512.07815•Physical Review Applied•Dec 9, 2025•3 citations

Quantum Calibration of Measurement Instrumentation

Giacomo Mauro D’Ariano, Lorenzo Maccone, Paoloplacido Lo Presti

By quantum calibration we name an experimental procedure apt to completely characterize an unknown measurement apparatus by comparing it with a few other calibrated apparatuses. Here we show how to achieve the calibration of an arbitrary measuring apparatus, by using it in combination with a tomographer in a correlation setup with an input bipartite system. The method is robust to imperfections of the tomographer, and works for practically any input state of the bipartite system.

arXiv:quant-ph/0408116•Physical Review Letters•Dec 16, 2004•93 citations
The calibration of quantum measurements is limited by the ability to accurately prepare quantum states under unknown device errors. We develop an accurate calibration protocol for the measurement apparatus of a quantum computer that is `blind' to the state preparation. Blind calibration quantifies and corrects measurement errors from simple tomographic data on a noisy quantum state. Importantly, it calibrates multiple error mechanisms in a single experiment, eliminating the need for bespoke, separate calibration experiments. Using a trapped-ion quantum computer, we systematically demonstrate the accuracy of the method. We use blind calibration to estimate the native calibration parameters of the experimental system. The recovered calibrations are consistent with directly measured values and perform similarly in predicting the state properties.
Extracting tomographic information about quantum states is a crucial task in the quest towards devising high-precision quantum devices. Current schemes typically require measurement devices for tomography that are a priori calibrated to high precision. Ironically, the accuracy of the measurement calibration is fundamentally limited by the accuracy of state preparation, establishing a vicious cycle. Here, we prove that this cycle can be broken and the dependence on the measurement device's calibration significantly relaxed. We show that exploiting the natural low-rank structure of quantum states of interest suffices to arrive at a highly scalable `blind' tomography scheme with a classically efficient post-processing algorithm. We further improve the efficiency of our scheme by making use of the sparse structure of the calibrations. This is achieved by relaxing the blind quantum tomography problem to the de-mixing of a sparse sum of low-rank matrices. We prove that the proposed algorithm recovers a low-rank quantum state and the calibration provided that the measurement model exhibits a restricted isometry property. For generic measurements, we show that it requires a close-to-optimal number of measurement settings. Complementing these conceptual and mathematical insights, we numerically demonstrate that robust blind quantum tomography is possible in a practical setting inspired by an implementation of trapped ions.
Abstract Quantum error correction can reduce the effects of noise in quantum systems, e.g. in metrology or most notably in quantum computing. Typically, this requires making measurements that provide information about the errors that have occurred in the system. However, these syndrome measurements themselves introduce noise into the system, for example by using noisy gates. A complete characterization of the measurements is very costly. Here we describe a calibration method to obtain the syndrome statistics taking into account the additional noise sources. All calibration data are extracted from a single experiment in which the syndrome measurement is performed twice in a row. Thus, our method allows an accurate evaluation of syndrome measurements with significantly less effort than existing methods. We give examples of the application of this method to noise estimation and error correction. Finally, we discuss the results of experiments performed on an IBM quantum computer.
To mitigate the noise in quantum channels, calibration is used to tune the devices to minimize error. Generally, calibration is performed by transmitting pre-agreed-upon calibration states and determining an error cost so the two parties can tune their devices accordingly. The calibration states can be the same ones used for the desired protocol, and so an untrusted party could potentially learn which protocol is being performed by gathering knowledge of the calibration states and cost function. Here, we assume privacy of the protocol is the goal and therefore the receiver should not be allowed to determine the protocol states. We limit the information that is revealed to the receiver, and in this regard, we propose a simple protocol that hides the calibration states and cost function from the receiver, but still allows for calibration to be performed efficiently, thereby increasing the privacy of the protocol. We show various numerical results demonstrating the ability of the protocol under various channel noise parameters and communication scenarios.
Self-calibrating quantum state tomography aims at reconstructing the unknown quantum state and certain properties of the measurement devices from the same data. Since the estimates of the state and device parameters come from the same data, one should employ a joint estimation scheme, including the construction and reporting of joint state-device error regions, to quantify uncertainty. We explain how to do this naturally within the framework of optimal error regions. As an illustrative example, we apply our procedure to the double-crosshair measurement of the BB84 scenario in quantum cryptography and so reconstruct the state and estimate the detection efficiencies simultaneously and reliably. We also discuss the practical situation of a satellite-based quantum key distribution scheme, for which self-calibration and proper treatment of the data are necessities.
We introduce two classes of lightweight, adaptive calibration protocols for quantum computers that leverage fast feedback. The first enables shot-by-shot updates to device parameters using measurement outcomes from simple, indefinite-outcome quantum circuits. This low-latency approach supports rapid tuning of one or more parameters in real time to mitigate drift. The second protocol updates parameters after collecting measurements from definite-outcome circuits (e.g.~syndrome extraction circuits for quantum error correction), balancing efficiency with classical control overheads. We use numerical simulations to demonstrate that both methods can calibrate 1- and 2-qubit gates rapidly and accurately even in the presence of decoherence, state preparation and measurement (SPAM) errors, and parameter drift. We propose and demonstrate effective adaptive strategies for tuning the hyperparameters of both protocols. Finally, we demonstrate the feasibility of real-time in-situ calibration of qubits performing quantum error correction, using only syndrome data, via numerical simulations of syndrome extraction in the [[5,1,3]] code.