Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2409.08764

Quadrature amplitude modulation for electronic sideband Pound-Drever-Hall laser frequency locking

Tu, J., Alessandro Restelli, K. Weber, Ian B. Spielman, S. L. Rolston, J. V. Porto, S. Subhankar

Published Sep 13, 2024• 2 citations
arXivHTMLPDF

Abstract

The Pound--Drever--Hall (PDH) technique is routinely used to stabilize the frequency of a laser to a reference cavity. Electronic sideband (ESB) locking, a PDH variant, bridges the frequency gap between the discrete cavity resonances and a desired laser frequency. Here we use quadrature amplitude modulation (QAM), a standard technique in digital communications, to generate the high-quality phase-modulated radio-frequency (rf) drive required for ESB locking. We develop a theoretical framework to analyze how in-phase/quadrature-phase (I/Q) impairments distort the ESB error signal and induce frequency offsets relevant to ultranarrow-linewidth lasers. We then design and implement a direct software-defined radio (SDR) on an UltraScale+ RFSoC platform, frequently adopted across modern quantum-computing systems, to digitally compensate QAM I/Q impairments. Using this device, we generate phase-modulated rf signals with a large phase-modulation index of $1.01$ rad and root-mean-square I/Q errors below $0.3\ \%$ over a carrier-frequency range of $350~\mathrm{MHz}$ to $1.75~\mathrm{GHz}$. Finally, we lock a laser to an ultralow expansion (ULE) reference cavity and demonstrate continuous laser-frequency tuning by ramping the carrier frequency while maintaining lock, validating the continuous tunability of our ESB locking instrument.

DOI
10.48550/arxiv.2409.08764

Related papers

Artificial modulation-free Pound–Drever–Hall method for laser frequency stabilization

H. M. Wang, Zitong Xu, S. C. Ma +3 more

We have proposed an artificial modulation-free Pound-Drever-Hall (PDH) method for laser frequency stabilization and demonstrated it via two-color polarization spectroscopy of Rydberg electromagnetically induced transparency (EIT) resonance in a room-temperature rubidium vapor. Due to the unique error signal profile, the conventional PDH method owns a large capture range in laser frequency locking. Here we manually construct a PDH error signal via a linear combination of polarization spectroscopies of the Rydberg EIT resonances without and with a magnetic field applied. The artificial modulation-free PDH error signal owns a subnatural linewidth dispersion curve as well as a large capture range with which we successfully stabilize the laser to an absolute atomic frequency reference in a long running time, immune to environmental fluctuation and even manmade impulse perturbation. This method can provide an absolute frequency reference based on atomic transition while keeping similar locking ability to provide corrections for frequency fluctuations over a broad bandwidth as the conventional PDH.

Optics Letters•Nov 27, 2019•19 citations

Injection-locked diode laser current modulation for Pound-Drever-Hall frequency stabilization using transfer cavities

Chelsea E. Liekhus-Schmaltz, R. Mantifel, Mozhgan Torabifard +2 more

A phase-modulated RF current source is applied to an injection-locked diode laser operating at 780 nm. This produces tunable phase-modulated sidebands of the laser suitable for stabilizing the length of an optical transfer cavity using the Pound-Drever-Hall technique. The Pound-Drever-Hall signal is antisymmetric about the lock point, despite the presence of significant diode laser amplitude modulation. The stabilized optical transfer cavity is used to frequency stabilize a 776 nm external cavity diode laser. The stability and tunability of this transfer cavity locked laser is established by observation of the hyperfine components of the Rb875P3/2−5D5/2 transition in a vapor cell.

arXiv:1109.0338•Journal of the Optical Society of America B•May 22, 2012•14 citations

Cavity-enhanced detection of transient absorption signals

Fernanda C. Rodrigues-Machado, Pauline Pestre, Liam Scanlon +3 more

\nWe present a simple, high-duty-cycle, cavity-enhanced optical absorption measurement technique based on delay-limited Pound-Drever-Hall (PDH) sideband locking. The chosen circuit naturally provides realtime readout of the amplitude quadrature of the PDH error signal, which can be mapped onto the cavity’s internal loss rate while using the phase quadrature to lock sideband frequency to the cavity mode. Our proofof-concept device comprises a 5-cm-long Fabry-Perot cavity with a 450 kHz bandwidth (finesse 6800, 350 ns power ringdown), and a feedback bandwidth of several MHz, limited primarily by the group delay of our electronics. This technique could readily be applied to other optical resonators such as fiber cavities, with potential applications in radiation dosimetry.\n

APS Division of Atomic, Molecular and Optical Physics Meeting Abstracts•Jan 1, 2020•0 citations

Cavity-enhanced detection of transient absorption signals

Fernanda C. Rodrigues-Machado, Pauline Pestre, Liam Scanlon +3 more

We present a simple, high-duty-cycle, cavity-enhanced optical absorption measurement technique based on delay-limited Pound-Drever-Hall (PDH) sideband locking. The chosen circuit naturally provides realtime readout of the amplitude quadrature of the PDH error signal, which can be mapped onto the cavity’s internal loss rate while using the phase quadrature to lock sideband frequency to the cavity mode. Our proofof-concept device comprises a 5-cm-long Fabry-Perot cavity with a 450 kHz bandwidth (finesse 6800, 350 ns power ringdown), and a feedback bandwidth of several MHz, limited primarily by the group delay of our electronics. This technique could readily be applied to other optical resonators such as fiber cavities, with potential applications in radiation dosimetry.

EPJ Web of Conferences•Jan 1, 2020•0 citations

Robust cavity metrology beyond the limits of Pound-Drever-Hall

Ibukunoluwa Adisa, Won Chan Lee, Yanqin Huang +3 more

Precise measurement of the resonance frequencies of microwave and optical cavities is a foundational capability across quantum technologies. One of the highest-performance methods currently available is Pound-Drever-Hall (PDH) spectroscopy, which relies on a three-tone interrogation and eliminates sensitivity to path-length fluctuations. However, PDH is known to suffer from systematic offsets due to residual amplitude modulation and demodulation-phase errors. Here we leverage an optimal linear combination of the phases of the three interrogation tones to implement a method for robust cavity metrology which eliminates significant systematic-error sensitivities of PDH. We experimentally demonstrate robust cavity measurements in both the optical and microwave frequency regime, showing insensitivity to sideband imbalance and demodulation phase, as well as demonstrating single-shot readout of a cavity-coupled superconducting qubit.

quant-pharXiv:2608.21512•Aug 25, 2026•0 citations

Study of phase-sensitive heterodyne locking

Peng Yang, Xuezhi Ke, Lei Zhang +1 more

Traditional locking techniques, such as PDH (Pound-Drever-Hall), HC (Hansh-Couillaud), spatial mode interference technique, offset sideband locking technique, quantum noise locking, etc., have been widely applied to laser frequency stabilization and precision optical interferometry measurement. Here, a new technique, which we call phase-sensitive heterodyne locking (PSHL), is investigated by use of frequency-synthesized light to obtain a phase-sensitive high-frequency photoelectric readout to lock the phase of a squeezed light. Comparing with above techniques, there are several kinds of advantages for PSHL to be advocated. Frequency-synthesized light, which allows arbitrary control of the amplitudes and phases of the modulation sidebands relative to the carrier, is derived by the AOM (acousto-optic modulator), not the EOM (electro-optic modulator). Interferometic signals coming from a balanced heterodyne detector are high-frequency AC photoelectric current which can easily get rid of low-frequency classical noise and lead to reach or break through the shot noise limit. A theoretical derivation of the PSHL error signal and the associated stability of the squeezed and anti-squeezed lock points will be carried out in this work.

Tenth International Conference on Information Optics and Photonics•Nov 1, 2021•0 citations
The Pound--Drever--Hall (PDH) technique is routinely used to stabilize the frequency of a laser to a reference cavity. Electronic sideband (ESB) locking, a PDH variant, bridges the frequency gap between the discrete cavity resonances and a desired laser frequency. Here we use quadrature amplitude modulation (QAM), a standard technique in digital communications, to generate the high-quality phase-modulated radio-frequency (rf) drive required for ESB locking. We develop a theoretical framework to analyze how in-phase/quadrature-phase (I/Q) impairments distort the ESB error signal and induce frequency offsets relevant to ultranarrow-linewidth lasers. We then design and implement a direct software-defined radio (SDR) on an UltraScale+ RFSoC platform, frequently adopted across modern quantum-computing systems, to digitally compensate QAM I/Q impairments. Using this device, we generate phase-modulated rf signals with a large phase-modulation index of 1.011.011.01 rad and root-mean-square I/Q errors below 0.3 %0.3\ \%0.3 % over a carrier-frequency range of 350 MHz350~\mathrm{MHz}350 MHz to 1.75 GHz1.75~\mathrm{GHz}1.75 GHz. Finally, we lock a laser to an ultralow expansion (ULE) reference cavity and demonstrate continuous laser-frequency tuning by ramping the carrier frequency while maintaining lock, validating the continuous tunability of our ESB locking instrument.
We have proposed an artificial modulation-free Pound-Drever-Hall (PDH) method for laser frequency stabilization and demonstrated it via two-color polarization spectroscopy of Rydberg electromagnetically induced transparency (EIT) resonance in a room-temperature rubidium vapor. Due to the unique error signal profile, the conventional PDH method owns a large capture range in laser frequency locking. Here we manually construct a PDH error signal via a linear combination of polarization spectroscopies of the Rydberg EIT resonances without and with a magnetic field applied. The artificial modulation-free PDH error signal owns a subnatural linewidth dispersion curve as well as a large capture range with which we successfully stabilize the laser to an absolute atomic frequency reference in a long running time, immune to environmental fluctuation and even manmade impulse perturbation. This method can provide an absolute frequency reference based on atomic transition while keeping similar locking ability to provide corrections for frequency fluctuations over a broad bandwidth as the conventional PDH.
A phase-modulated RF current source is applied to an injection-locked diode laser operating at 780 nm. This produces tunable phase-modulated sidebands of the laser suitable for stabilizing the length of an optical transfer cavity using the Pound-Drever-Hall technique. The Pound-Drever-Hall signal is antisymmetric about the lock point, despite the presence of significant diode laser amplitude modulation. The stabilized optical transfer cavity is used to frequency stabilize a 776 nm external cavity diode laser. The stability and tunability of this transfer cavity locked laser is established by observation of the hyperfine components of the Rb875P3/2−5D5/2 transition in a vapor cell.
\nWe present a simple, high-duty-cycle, cavity-enhanced optical absorption measurement technique based on delay-limited Pound-Drever-Hall (PDH) sideband locking. The chosen circuit naturally provides realtime readout of the amplitude quadrature of the PDH error signal, which can be mapped onto the cavity’s internal loss rate while using the phase quadrature to lock sideband frequency to the cavity mode. Our proofof-concept device comprises a 5-cm-long Fabry-Perot cavity with a 450 kHz bandwidth (finesse 6800, 350 ns power ringdown), and a feedback bandwidth of several MHz, limited primarily by the group delay of our electronics. This technique could readily be applied to other optical resonators such as fiber cavities, with potential applications in radiation dosimetry.\n
We present a simple, high-duty-cycle, cavity-enhanced optical absorption measurement technique based on delay-limited Pound-Drever-Hall (PDH) sideband locking. The chosen circuit naturally provides realtime readout of the amplitude quadrature of the PDH error signal, which can be mapped onto the cavity’s internal loss rate while using the phase quadrature to lock sideband frequency to the cavity mode. Our proofof-concept device comprises a 5-cm-long Fabry-Perot cavity with a 450 kHz bandwidth (finesse 6800, 350 ns power ringdown), and a feedback bandwidth of several MHz, limited primarily by the group delay of our electronics. This technique could readily be applied to other optical resonators such as fiber cavities, with potential applications in radiation dosimetry.
Precise measurement of the resonance frequencies of microwave and optical cavities is a foundational capability across quantum technologies. One of the highest-performance methods currently available is Pound-Drever-Hall (PDH) spectroscopy, which relies on a three-tone interrogation and eliminates sensitivity to path-length fluctuations. However, PDH is known to suffer from systematic offsets due to residual amplitude modulation and demodulation-phase errors. Here we leverage an optimal linear combination of the phases of the three interrogation tones to implement a method for robust cavity metrology which eliminates significant systematic-error sensitivities of PDH. We experimentally demonstrate robust cavity measurements in both the optical and microwave frequency regime, showing insensitivity to sideband imbalance and demodulation phase, as well as demonstrating single-shot readout of a cavity-coupled superconducting qubit.
Traditional locking techniques, such as PDH (Pound-Drever-Hall), HC (Hansh-Couillaud), spatial mode interference technique, offset sideband locking technique, quantum noise locking, etc., have been widely applied to laser frequency stabilization and precision optical interferometry measurement. Here, a new technique, which we call phase-sensitive heterodyne locking (PSHL), is investigated by use of frequency-synthesized light to obtain a phase-sensitive high-frequency photoelectric readout to lock the phase of a squeezed light. Comparing with above techniques, there are several kinds of advantages for PSHL to be advocated. Frequency-synthesized light, which allows arbitrary control of the amplitudes and phases of the modulation sidebands relative to the carrier, is derived by the AOM (acousto-optic modulator), not the EOM (electro-optic modulator). Interferometic signals coming from a balanced heterodyne detector are high-frequency AC photoelectric current which can easily get rid of low-frequency classical noise and lead to reach or break through the shot noise limit. A theoretical derivation of the PSHL error signal and the associated stability of the squeezed and anti-squeezed lock points will be carried out in this work.