Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Tenth International Conference on Information Optics and Photonics

Study of phase-sensitive heterodyne locking

Peng Yang, Xuezhi Ke, Lei Zhang, Guozhen Hu

Published Nov 1, 2021• 0 citations
Publisher

Abstract

Traditional locking techniques, such as PDH (Pound-Drever-Hall), HC (Hansh-Couillaud), spatial mode interference technique, offset sideband locking technique, quantum noise locking, etc., have been widely applied to laser frequency stabilization and precision optical interferometry measurement. Here, a new technique, which we call phase-sensitive heterodyne locking (PSHL), is investigated by use of frequency-synthesized light to obtain a phase-sensitive high-frequency photoelectric readout to lock the phase of a squeezed light. Comparing with above techniques, there are several kinds of advantages for PSHL to be advocated. Frequency-synthesized light, which allows arbitrary control of the amplitudes and phases of the modulation sidebands relative to the carrier, is derived by the AOM (acousto-optic modulator), not the EOM (electro-optic modulator). Interferometic signals coming from a balanced heterodyne detector are high-frequency AC photoelectric current which can easily get rid of low-frequency classical noise and lead to reach or break through the shot noise limit. A theoretical derivation of the PSHL error signal and the associated stability of the squeezed and anti-squeezed lock points will be carried out in this work.

DOI
10.1117/12.2604287

Related papers

Audio-frequency interferometry at the shot noise limit using an EOIM-based frequency-synthesized light

Peng Yang, Chaoran Tu, Zhichao Shi +1 more

The shot-noise-limited sensitivity for detecting audio-frequency phase signals has garnered significant interest in both research and practical applications. This work presents a novel experimental setup that generates frequency-synthesized light with suppressed carrier and enhanced sidebands using an electro-optic intensity modulator (EOIM). When injected into a Mach-Zehnder interferometer (MZI), the EOIM-generated light not only enables phase-sensitive heterodyne locking to stabilize the relative phase of the MZI but also functions as a balanced heterodyne detector for audio-frequency phase measurements. By integrating these three key techniques into the MZI, phase detection sensitivity reaches the shot-noise limit across the audio-frequency band. This advancement holds promise for applications in gravitational wave detection, vacuum magnetic birefringence studies, spin-orbital interactions, material characterization, polarization microscopy, atomic magnetometry, and biomedical optics.

Optics Express•Feb 19, 2026•2 citations

Quantum Noise: Basic Measurements and Techniques

Hans‐A. Bachor, Timothy C. Ralph

This chapter focuses on the measurement of quantum noise, that is the fundamental noise we observe on the photocurrent when we detect optical beams with a large coherent amplitude using photodetectors. It also focuses on continuous wave laser beams and the noise associated with the intensity, amplitude, and phase of the light. Three different techniques are commonly used: direct detection, balanced detection, and homodyne detection. The choice depends on the properties of laser beam. Heterodyne detection is frequently used to determine the linewidth of an unknown laser. The intensity noise of a laser can be reduced using an electro-optic modulator and a feedback controller, known as a noise eater. The chapter explains Frequency Stabilization process and Locking of Cavities. It outlines the principles of the locking technique. The commonly used locking techniques include Pound-Drever-Hall Locking, tilt locking and optical injection locking.

Wiley eBooks•Jul 5, 2019•1 citation

Quantum noise locking

Kirk McKenzie, Eugeniy E. Mikhailov, Keisuke Goda +5 more

Quantum optical states which have no coherent amplitude, such as squeezed vacuum states, can not rely on standard readout techniques to generate error signals for control of the quadrature phase. Here we investigate the use of asymmetry in the quadrature variances to obtain a phase-sensitive readout and to lock the phase of a squeezed vacuum state, a technique which we call noise locking (NL). We carry out a theoretical derivation of the NL error signal and the associated stability of the squeezed and anti-squeezed lock points. Experimental data for the NL technique both in the presence and absence of coherent fields are shown, including a comparison with coherent locking techniques. Finally, we use NL to enable a stable readout of the squeezed vacuum state on a homodyne detector.

arXiv:quant-ph/0505164•Journal of Optics B Quantum and Semiclassical Optics•Sep 26, 2005•88 citations

Quadrature amplitude modulation for electronic sideband Pound-Drever-Hall laser frequency locking

Tu, J., Alessandro Restelli, K. Weber +4 more

The Pound--Drever--Hall (PDH) technique is routinely used to stabilize the frequency of a laser to a reference cavity. Electronic sideband (ESB) locking, a PDH variant, bridges the frequency gap between the discrete cavity resonances and a desired laser frequency. Here we use quadrature amplitude modulation (QAM), a standard technique in digital communications, to generate the high-quality phase-modulated radio-frequency (rf) drive required for ESB locking. We develop a theoretical framework to analyze how in-phase/quadrature-phase (I/Q) impairments distort the ESB error signal and induce frequency offsets relevant to ultranarrow-linewidth lasers. We then design and implement a direct software-defined radio (SDR) on an UltraScale+ RFSoC platform, frequently adopted across modern quantum-computing systems, to digitally compensate QAM I/Q impairments. Using this device, we generate phase-modulated rf signals with a large phase-modulation index of $1.01$ rad and root-mean-square I/Q errors below $0.3\ \%$ over a carrier-frequency range of $350~\mathrm{MHz}$ to $1.75~\mathrm{GHz}$. Finally, we lock a laser to an ultralow expansion (ULE) reference cavity and demonstrate continuous laser-frequency tuning by ramping the carrier frequency while maintaining lock, validating the continuous tunability of our ESB locking instrument.

arXiv:2409.08764•Sep 13, 2024•2 citations

A novel technique for laser mode-matching in gravitational wave detectors

M Carlassara

Current interferometric gravitational wave detectors were designed to be limited, in much of their sensitive \nband, by quantum noise in the form of shot noise (at high frequency) or quantum radiation pressure noise \n(at low frequency). In the current observation run (O3), a squeezed light source has been used to \nmanipulate quantum noise and surpass the limits imposed by the circulating laser power by injecting nonclassical states of the electromagnetic field, called squeezed vacuum states, in the interferometer's dark \nport. Recent O3 results show that this technique was able to reduce the shot noise contribution to the \nnoise spectral density by about one half. To surpass the so called standard quantum limit across the entire \nsensitivity band, an even more complex variation of this technique will be implemented, which requires the \nuse of a so called “filter cavity” to reflect the squeezed quantum field and rotate the squeezing angle as a \nfunction of frequency. \nThe performance of this techniques is however severely limited by light losses. One big contributor to \noptical losses is the mismatch between the squeezed vacuum beam, the beam circulating into the \ninterferometer and, in the near future, the filter cavity fundamental transverse spatial mode. \nTo be able to monitor and actively correct mode mismatch, an accurate, online sensing technique is \nneeded. A possible solution consists in the introduction of an Electro-Optic Lens (EOL) that can induce \nradio-frequency sidebands in the Laguerre-Gauss 10 (LG10) transverse mode of the beam. If the \nmodulation frequency is tuned in a way that one sideband is at the cavity LG10 frequency, then the \nresonance breaks the symmetry of the two sidebands and converts phase modulation into amplitude \nmodulation, making it possible to retrieve an error signal directly from the cavity reflected electric field \nwith the same single-element photodetector used for the Pound Drever Hall (PDH) locking technique. This \nerror signal carries information about the magnitude and nature of the mismatch, providing all is needed to \ninform a dedicated feedback loop with a suitable actuator to maintain the mismatch at or below the 1% \nlevel. \nThe goal of this thesis is to demonstrate the technique on a dedicated bench-top experiment employing an \nEOL prototype device. The EOL alignment and working point, as well as the cavity lock parameters were \noptimized in an already existing setup. Simulations and theoretical calculations of the cavity reflected field \nwere performed to evaluate the system non-idealities: both Electro-Optic Modulator (for PDH technique) \nand EOL modulations effects and interactions, as well as some system imperfections were considered. The \nsimulations confirm that this technique requires a stable cavity lock condition, and for this reason an \naccurate study and optimization of the feedback loop parameters was done. In conclusion, a \ncharacterization of the EOL error signal response to different mismatch conditions are presented.

•Jun 1, 2020•0 citations

Balanced-heterodyne detection of sub-shot-noise optical signals

Sheng Feng, Lu, Zehuan, Jie Zhang +1 more

As part of the effort to make use of squeezed states of light for detection of sub-shot-noise optical signals, we study the balanced heterodyne scheme, for which the corresponding spectral density of the photocurrent fluctuations produced at the output of the detector is calculated as the Fourier transform of their autocorrelation function. Our analysis shows that, for maximal signal-to-noise ratio enhancement by use of squeezed states of light, an optical signal to be measured must be carried in the squeezed quadrature of the carrier field. We discuss how "the additional heterodyne noise" can be eliminated in this scheme and its potential application to gravitational-wave searching. To demonstrate the practical feasibility, we propose and study a phase-locking technique for this scheme.

arXiv:1112.3155•Dec 14, 2011•4 citations
Traditional locking techniques, such as PDH (Pound-Drever-Hall), HC (Hansh-Couillaud), spatial mode interference technique, offset sideband locking technique, quantum noise locking, etc., have been widely applied to laser frequency stabilization and precision optical interferometry measurement. Here, a new technique, which we call phase-sensitive heterodyne locking (PSHL), is investigated by use of frequency-synthesized light to obtain a phase-sensitive high-frequency photoelectric readout to lock the phase of a squeezed light. Comparing with above techniques, there are several kinds of advantages for PSHL to be advocated. Frequency-synthesized light, which allows arbitrary control of the amplitudes and phases of the modulation sidebands relative to the carrier, is derived by the AOM (acousto-optic modulator), not the EOM (electro-optic modulator). Interferometic signals coming from a balanced heterodyne detector are high-frequency AC photoelectric current which can easily get rid of low-frequency classical noise and lead to reach or break through the shot noise limit. A theoretical derivation of the PSHL error signal and the associated stability of the squeezed and anti-squeezed lock points will be carried out in this work.
The shot-noise-limited sensitivity for detecting audio-frequency phase signals has garnered significant interest in both research and practical applications. This work presents a novel experimental setup that generates frequency-synthesized light with suppressed carrier and enhanced sidebands using an electro-optic intensity modulator (EOIM). When injected into a Mach-Zehnder interferometer (MZI), the EOIM-generated light not only enables phase-sensitive heterodyne locking to stabilize the relative phase of the MZI but also functions as a balanced heterodyne detector for audio-frequency phase measurements. By integrating these three key techniques into the MZI, phase detection sensitivity reaches the shot-noise limit across the audio-frequency band. This advancement holds promise for applications in gravitational wave detection, vacuum magnetic birefringence studies, spin-orbital interactions, material characterization, polarization microscopy, atomic magnetometry, and biomedical optics.
This chapter focuses on the measurement of quantum noise, that is the fundamental noise we observe on the photocurrent when we detect optical beams with a large coherent amplitude using photodetectors. It also focuses on continuous wave laser beams and the noise associated with the intensity, amplitude, and phase of the light. Three different techniques are commonly used: direct detection, balanced detection, and homodyne detection. The choice depends on the properties of laser beam. Heterodyne detection is frequently used to determine the linewidth of an unknown laser. The intensity noise of a laser can be reduced using an electro-optic modulator and a feedback controller, known as a noise eater. The chapter explains Frequency Stabilization process and Locking of Cavities. It outlines the principles of the locking technique. The commonly used locking techniques include Pound-Drever-Hall Locking, tilt locking and optical injection locking.
Quantum optical states which have no coherent amplitude, such as squeezed vacuum states, can not rely on standard readout techniques to generate error signals for control of the quadrature phase. Here we investigate the use of asymmetry in the quadrature variances to obtain a phase-sensitive readout and to lock the phase of a squeezed vacuum state, a technique which we call noise locking (NL). We carry out a theoretical derivation of the NL error signal and the associated stability of the squeezed and anti-squeezed lock points. Experimental data for the NL technique both in the presence and absence of coherent fields are shown, including a comparison with coherent locking techniques. Finally, we use NL to enable a stable readout of the squeezed vacuum state on a homodyne detector.
The Pound--Drever--Hall (PDH) technique is routinely used to stabilize the frequency of a laser to a reference cavity. Electronic sideband (ESB) locking, a PDH variant, bridges the frequency gap between the discrete cavity resonances and a desired laser frequency. Here we use quadrature amplitude modulation (QAM), a standard technique in digital communications, to generate the high-quality phase-modulated radio-frequency (rf) drive required for ESB locking. We develop a theoretical framework to analyze how in-phase/quadrature-phase (I/Q) impairments distort the ESB error signal and induce frequency offsets relevant to ultranarrow-linewidth lasers. We then design and implement a direct software-defined radio (SDR) on an UltraScale+ RFSoC platform, frequently adopted across modern quantum-computing systems, to digitally compensate QAM I/Q impairments. Using this device, we generate phase-modulated rf signals with a large phase-modulation index of 1.011.011.01 rad and root-mean-square I/Q errors below 0.3 %0.3\ \%0.3 % over a carrier-frequency range of 350 MHz350~\mathrm{MHz}350 MHz to 1.75 GHz1.75~\mathrm{GHz}1.75 GHz. Finally, we lock a laser to an ultralow expansion (ULE) reference cavity and demonstrate continuous laser-frequency tuning by ramping the carrier frequency while maintaining lock, validating the continuous tunability of our ESB locking instrument.
Current interferometric gravitational wave detectors were designed to be limited, in much of their sensitive \nband, by quantum noise in the form of shot noise (at high frequency) or quantum radiation pressure noise \n(at low frequency). In the current observation run (O3), a squeezed light source has been used to \nmanipulate quantum noise and surpass the limits imposed by the circulating laser power by injecting nonclassical states of the electromagnetic field, called squeezed vacuum states, in the interferometer's dark \nport. Recent O3 results show that this technique was able to reduce the shot noise contribution to the \nnoise spectral density by about one half. To surpass the so called standard quantum limit across the entire \nsensitivity band, an even more complex variation of this technique will be implemented, which requires the \nuse of a so called “filter cavity” to reflect the squeezed quantum field and rotate the squeezing angle as a \nfunction of frequency. \nThe performance of this techniques is however severely limited by light losses. One big contributor to \noptical losses is the mismatch between the squeezed vacuum beam, the beam circulating into the \ninterferometer and, in the near future, the filter cavity fundamental transverse spatial mode. \nTo be able to monitor and actively correct mode mismatch, an accurate, online sensing technique is \nneeded. A possible solution consists in the introduction of an Electro-Optic Lens (EOL) that can induce \nradio-frequency sidebands in the Laguerre-Gauss 10 (LG10) transverse mode of the beam. If the \nmodulation frequency is tuned in a way that one sideband is at the cavity LG10 frequency, then the \nresonance breaks the symmetry of the two sidebands and converts phase modulation into amplitude \nmodulation, making it possible to retrieve an error signal directly from the cavity reflected electric field \nwith the same single-element photodetector used for the Pound Drever Hall (PDH) locking technique. This \nerror signal carries information about the magnitude and nature of the mismatch, providing all is needed to \ninform a dedicated feedback loop with a suitable actuator to maintain the mismatch at or below the 1% \nlevel. \nThe goal of this thesis is to demonstrate the technique on a dedicated bench-top experiment employing an \nEOL prototype device. The EOL alignment and working point, as well as the cavity lock parameters were \noptimized in an already existing setup. Simulations and theoretical calculations of the cavity reflected field \nwere performed to evaluate the system non-idealities: both Electro-Optic Modulator (for PDH technique) \nand EOL modulations effects and interactions, as well as some system imperfections were considered. The \nsimulations confirm that this technique requires a stable cavity lock condition, and for this reason an \naccurate study and optimization of the feedback loop parameters was done. In conclusion, a \ncharacterization of the EOL error signal response to different mismatch conditions are presented.
As part of the effort to make use of squeezed states of light for detection of sub-shot-noise optical signals, we study the balanced heterodyne scheme, for which the corresponding spectral density of the photocurrent fluctuations produced at the output of the detector is calculated as the Fourier transform of their autocorrelation function. Our analysis shows that, for maximal signal-to-noise ratio enhancement by use of squeezed states of light, an optical signal to be measured must be carried in the squeezed quadrature of the carrier field. We discuss how "the additional heterodyne noise" can be eliminated in this scheme and its potential application to gravitational-wave searching. To demonstrate the practical feasibility, we propose and study a phase-locking technique for this scheme.