Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

EPJ Web of Conferences

Cavity-enhanced detection of transient absorption signals

Fernanda C. Rodrigues-Machado, Pauline Pestre, Liam Scanlon, Shirin Abbasinejad Enger, Jack C. Sankey, Lilian Childress

Published Jan 1, 2020• 0 citations
Publisher

Abstract

We present a simple, high-duty-cycle, cavity-enhanced optical absorption measurement technique based on delay-limited Pound-Drever-Hall (PDH) sideband locking. The chosen circuit naturally provides realtime readout of the amplitude quadrature of the PDH error signal, which can be mapped onto the cavity’s internal loss rate while using the phase quadrature to lock sideband frequency to the cavity mode. Our proofof-concept device comprises a 5-cm-long Fabry-Perot cavity with a 450 kHz bandwidth (finesse 6800, 350 ns power ringdown), and a feedback bandwidth of several MHz, limited primarily by the group delay of our electronics. This technique could readily be applied to other optical resonators such as fiber cavities, with potential applications in radiation dosimetry.

DOI
10.1051/epjconf/202023812003

Related papers

Cavity-enhanced detection of transient absorption signals

Fernanda C. Rodrigues-Machado, Pauline Pestre, Liam Scanlon +3 more

\nWe present a simple, high-duty-cycle, cavity-enhanced optical absorption measurement technique based on delay-limited Pound-Drever-Hall (PDH) sideband locking. The chosen circuit naturally provides realtime readout of the amplitude quadrature of the PDH error signal, which can be mapped onto the cavity’s internal loss rate while using the phase quadrature to lock sideband frequency to the cavity mode. Our proofof-concept device comprises a 5-cm-long Fabry-Perot cavity with a 450 kHz bandwidth (finesse 6800, 350 ns power ringdown), and a feedback bandwidth of several MHz, limited primarily by the group delay of our electronics. This technique could readily be applied to other optical resonators such as fiber cavities, with potential applications in radiation dosimetry.\n

APS Division of Atomic, Molecular and Optical Physics Meeting Abstracts•Jan 1, 2020•0 citations

Sideband cavity absorption readout (SideCAR) with a robust frequency lock

Fernanda C. Rodrigues-Machado, Pauline Pestre, Vincent Dumont +6 more

We present a simple, continuous, cavity-enhanced optical absorption measurement technique based on high-bandwidth Pound-Drever-Hall (PDH) sideband locking. The technique provides a resonant amplitude quadrature readout that can be mapped onto the cavity’s internal loss rate and is naturally compatible with weak probe beams. With a proof-of-concept 5-cm-long Fabry-Perot cavity, we measure an absorption sensitivity ∼ 10 − 10 cm − 1 / Hz from 30 kHz to 1 MHz, and a minimum value of 6.6 × 10 − 11 cm − 1 / Hz at 100 kHz, with 38 µW collected from the cavity’s circulating power.

arXiv:2110.02888•Optics Express•Dec 3, 2021•0 citations

Quadrature amplitude modulation for electronic sideband Pound-Drever-Hall laser frequency locking

Tu, J., Alessandro Restelli, K. Weber +4 more

The Pound--Drever--Hall (PDH) technique is routinely used to stabilize the frequency of a laser to a reference cavity. Electronic sideband (ESB) locking, a PDH variant, bridges the frequency gap between the discrete cavity resonances and a desired laser frequency. Here we use quadrature amplitude modulation (QAM), a standard technique in digital communications, to generate the high-quality phase-modulated radio-frequency (rf) drive required for ESB locking. We develop a theoretical framework to analyze how in-phase/quadrature-phase (I/Q) impairments distort the ESB error signal and induce frequency offsets relevant to ultranarrow-linewidth lasers. We then design and implement a direct software-defined radio (SDR) on an UltraScale+ RFSoC platform, frequently adopted across modern quantum-computing systems, to digitally compensate QAM I/Q impairments. Using this device, we generate phase-modulated rf signals with a large phase-modulation index of $1.01$ rad and root-mean-square I/Q errors below $0.3\ \%$ over a carrier-frequency range of $350~\mathrm{MHz}$ to $1.75~\mathrm{GHz}$. Finally, we lock a laser to an ultralow expansion (ULE) reference cavity and demonstrate continuous laser-frequency tuning by ramping the carrier frequency while maintaining lock, validating the continuous tunability of our ESB locking instrument.

arXiv:2409.08764•Sep 13, 2024•2 citations

Robust cavity metrology beyond the limits of Pound-Drever-Hall

Ibukunoluwa Adisa, Won Chan Lee, Yanqin Huang +3 more

Precise measurement of the resonance frequencies of microwave and optical cavities is a foundational capability across quantum technologies. One of the highest-performance methods currently available is Pound-Drever-Hall (PDH) spectroscopy, which relies on a three-tone interrogation and eliminates sensitivity to path-length fluctuations. However, PDH is known to suffer from systematic offsets due to residual amplitude modulation and demodulation-phase errors. Here we leverage an optimal linear combination of the phases of the three interrogation tones to implement a method for robust cavity metrology which eliminates significant systematic-error sensitivities of PDH. We experimentally demonstrate robust cavity measurements in both the optical and microwave frequency regime, showing insensitivity to sideband imbalance and demodulation phase, as well as demonstrating single-shot readout of a cavity-coupled superconducting qubit.

quant-pharXiv:2608.21512•Aug 25, 2026•0 citations

Optical feedback frequency stabilized cavity ring-down spectroscopy

Johannes Burkart, D. Romanini, S. Kassi

We introduce optical feedback frequency stabilized cavity ring-down spectroscopy (OFFS-CRDS), a near-shot-noise-limited technique that combines kilohertz resolution with an absorption detection sensitivity of 5×10(-13) cm(-1) Hz(-1/2). Its distributed feedback laser source is stabilized to a highly stable V-shaped reference cavity by optical feedback and fine-tuned by means of single-sideband modulation. The stability of this narrow laser is transferred to a ring-down (RD) cavity using a new fibered Pound-Drever-Hall (PDH) locking scheme without a dedicated electro-optic phase modulator, yielding several hundred RD events per second. We demonstrate continuous coverage of more than 7 nm with a baseline noise of 5×10(-12) cm(-1) and a dynamic range spanning six decades. With its resonant intracavity light intensity on the order of 1 kW/cm2, the spectrometer was used for observing a Lamb dip in a transition of carbon dioxide involving four vibrational quanta. Saturating such a weak transition at 160 μW input power, OFFS-CRDS paves the way to Doppler-free molecular overtone spectroscopy for precision measurements of hyperfine structures and pressure shifts.

Optics Letters•Aug 4, 2014•66 citations

The Pound-Drever-Hall Method for Superconducting-Qubit Readout

Ibukunoluwa Adisa, Won Chan Lee, Kevin C. Cox +1 more

Scaling quantum computers to large sizes requires the implementation of many parallel qubit readouts. Here we present an ultrastable superconducting-qubit readout method using the multi-tone self-phase-referenced Pound-Drever-Hall (PDH) technique, originally developed for use with optical cavities. In this work, we benchmark PDH readout of a single transmon qubit, using room-temperature heterodyne detection of all tones to reconstruct the PDH signal. We demonstrate that PDH qubit readout is insensitive to microwave phase drift, displaying $0.73^\circ$ phase stability over 2 hours, and capable of single-shot readout in the presence of phase errors exceeding the phase shift induced by the qubit state. We show that the PDH sideband tones do not cause unwanted measurement-induced state transitions for a transmon qubit, leading to a potential signal enhancement of at least $14$~dB.

quant-pharXiv:2512.03138•Physical Review Letters•Dec 4, 2025•1 citation
We present a simple, high-duty-cycle, cavity-enhanced optical absorption measurement technique based on delay-limited Pound-Drever-Hall (PDH) sideband locking. The chosen circuit naturally provides realtime readout of the amplitude quadrature of the PDH error signal, which can be mapped onto the cavity’s internal loss rate while using the phase quadrature to lock sideband frequency to the cavity mode. Our proofof-concept device comprises a 5-cm-long Fabry-Perot cavity with a 450 kHz bandwidth (finesse 6800, 350 ns power ringdown), and a feedback bandwidth of several MHz, limited primarily by the group delay of our electronics. This technique could readily be applied to other optical resonators such as fiber cavities, with potential applications in radiation dosimetry.
\nWe present a simple, high-duty-cycle, cavity-enhanced optical absorption measurement technique based on delay-limited Pound-Drever-Hall (PDH) sideband locking. The chosen circuit naturally provides realtime readout of the amplitude quadrature of the PDH error signal, which can be mapped onto the cavity’s internal loss rate while using the phase quadrature to lock sideband frequency to the cavity mode. Our proofof-concept device comprises a 5-cm-long Fabry-Perot cavity with a 450 kHz bandwidth (finesse 6800, 350 ns power ringdown), and a feedback bandwidth of several MHz, limited primarily by the group delay of our electronics. This technique could readily be applied to other optical resonators such as fiber cavities, with potential applications in radiation dosimetry.\n
We present a simple, continuous, cavity-enhanced optical absorption measurement technique based on high-bandwidth Pound-Drever-Hall (PDH) sideband locking. The technique provides a resonant amplitude quadrature readout that can be mapped onto the cavity’s internal loss rate and is naturally compatible with weak probe beams. With a proof-of-concept 5-cm-long Fabry-Perot cavity, we measure an absorption sensitivity ∼ 10 − 10 cm − 1 / Hz from 30 kHz to 1 MHz, and a minimum value of 6.6 × 10 − 11 cm − 1 / Hz at 100 kHz, with 38 µW collected from the cavity’s circulating power.
The Pound--Drever--Hall (PDH) technique is routinely used to stabilize the frequency of a laser to a reference cavity. Electronic sideband (ESB) locking, a PDH variant, bridges the frequency gap between the discrete cavity resonances and a desired laser frequency. Here we use quadrature amplitude modulation (QAM), a standard technique in digital communications, to generate the high-quality phase-modulated radio-frequency (rf) drive required for ESB locking. We develop a theoretical framework to analyze how in-phase/quadrature-phase (I/Q) impairments distort the ESB error signal and induce frequency offsets relevant to ultranarrow-linewidth lasers. We then design and implement a direct software-defined radio (SDR) on an UltraScale+ RFSoC platform, frequently adopted across modern quantum-computing systems, to digitally compensate QAM I/Q impairments. Using this device, we generate phase-modulated rf signals with a large phase-modulation index of 1.011.011.01 rad and root-mean-square I/Q errors below 0.3 %0.3\ \%0.3 % over a carrier-frequency range of 350 MHz350~\mathrm{MHz}350 MHz to 1.75 GHz1.75~\mathrm{GHz}1.75 GHz. Finally, we lock a laser to an ultralow expansion (ULE) reference cavity and demonstrate continuous laser-frequency tuning by ramping the carrier frequency while maintaining lock, validating the continuous tunability of our ESB locking instrument.
Precise measurement of the resonance frequencies of microwave and optical cavities is a foundational capability across quantum technologies. One of the highest-performance methods currently available is Pound-Drever-Hall (PDH) spectroscopy, which relies on a three-tone interrogation and eliminates sensitivity to path-length fluctuations. However, PDH is known to suffer from systematic offsets due to residual amplitude modulation and demodulation-phase errors. Here we leverage an optimal linear combination of the phases of the three interrogation tones to implement a method for robust cavity metrology which eliminates significant systematic-error sensitivities of PDH. We experimentally demonstrate robust cavity measurements in both the optical and microwave frequency regime, showing insensitivity to sideband imbalance and demodulation phase, as well as demonstrating single-shot readout of a cavity-coupled superconducting qubit.
We introduce optical feedback frequency stabilized cavity ring-down spectroscopy (OFFS-CRDS), a near-shot-noise-limited technique that combines kilohertz resolution with an absorption detection sensitivity of 5×10(-13) cm(-1) Hz(-1/2). Its distributed feedback laser source is stabilized to a highly stable V-shaped reference cavity by optical feedback and fine-tuned by means of single-sideband modulation. The stability of this narrow laser is transferred to a ring-down (RD) cavity using a new fibered Pound-Drever-Hall (PDH) locking scheme without a dedicated electro-optic phase modulator, yielding several hundred RD events per second. We demonstrate continuous coverage of more than 7 nm with a baseline noise of 5×10(-12) cm(-1) and a dynamic range spanning six decades. With its resonant intracavity light intensity on the order of 1 kW/cm2, the spectrometer was used for observing a Lamb dip in a transition of carbon dioxide involving four vibrational quanta. Saturating such a weak transition at 160 μW input power, OFFS-CRDS paves the way to Doppler-free molecular overtone spectroscopy for precision measurements of hyperfine structures and pressure shifts.
Scaling quantum computers to large sizes requires the implementation of many parallel qubit readouts. Here we present an ultrastable superconducting-qubit readout method using the multi-tone self-phase-referenced Pound-Drever-Hall (PDH) technique, originally developed for use with optical cavities. In this work, we benchmark PDH readout of a single transmon qubit, using room-temperature heterodyne detection of all tones to reconstruct the PDH signal. We demonstrate that PDH qubit readout is insensitive to microwave phase drift, displaying 0.73∘0.73^\circ0.73∘ phase stability over 2 hours, and capable of single-shot readout in the presence of phase errors exceeding the phase shift induced by the qubit state. We show that the PDH sideband tones do not cause unwanted measurement-induced state transitions for a transmon qubit, leading to a potential signal enhancement of at least 141414~dB.