Photon-absorption-based quantum circuit refrigeration is crucial to developing superconducting quantum computers, particularly for initializing qubits. However, precise and rapid measurement of residual photons in the circuit immediately after absorption has been a significant technical challenge. This study employs the ac Stark shift of superconducting qubits to detect sub-photon-level energies in the circuit, confirming the effectiveness of the fast refrigeration even in the quantum regime. These results will facilitate the development of more efficient quantum refrigeration devices and faster, high-fidelity qubit initialization.
Photon-absorption-based quantum circuit refrigeration is crucial to developing superconducting quantum computers, particularly for initializing qubits. However, precise and rapid measurement of residual photons in the circuit immediately after absorption has been a significant technical challenge. This study employs the ac Stark shift of superconducting qubits to detect sub-photon-level energies in the circuit, confirming the effectiveness of the fast refrigeration even in the quantum regime. These results will facilitate the development of more efficient quantum refrigeration devices and faster, high-fidelity qubit initialization.
The initialization of superconducting qubits is one of the essential techniques for the realization of quantum computation. In previous research, initialization above 99% fidelity has been achieved at 280 ns. Here, we demonstrate the rapid initialization of a superconducting qubit with a quantum circuit refrigerator (QCR). Photon-assisted tunneling of quasiparticles in the QCR can temporally increase the relaxation time of photons inside the resonator and helps release energy from the qubit to the environment. Experiments using this protocol have shown that 99% of initialization time is reduced to 200 ns. This initialization time depends strongly on the relaxation rate of the resonator, and faster initialization is possible by reducing the resistance of the QCR, which limits the on:off ratio, and by strengthening the coupling between the QCR and the resonator.
Superconducting microwave circuits are promising candidates for a variety of different applications, ranging from extremely sensitive photon detectors to large-scale quantum computer. Thus, they may revolutionize our everyday lives in the future through substantial technological development. Superconducting quantum circuits typically operate at low power levels and consist of linear and nonlinear resonators. In order to enhance their operation fidelity, they need to be cooled efficiently, and the dissipation of the circuit needs to be well engineered. In this chapter, we describe a refrigerator for electric quantum circuits based on photon-assisted electron tunneling in hybrid superconductor–insulator–normal-metal junctions. Furthermore, such junctions can also serve as incoherent microwave sources. Importantly, the photon absorption and emission rates can be tuned over several orders of magnitude. In addition, these junctions are used for refrigeration and heating of the normal-metal electrons as well as for probing the electron temperature. Here, we present their operation principle and provide insight to their potential applications as well as briefly describe fabrication methods.
We present here our recent results on qubit reset scheme based on a quantum-circuit refrigerator (QCR). In particular, we use the photon-assisted quasiparticle tunneling through a superconductor–insulator–normal-metal–insulator–superconductor junction to controllably decrease the energy relaxation time of the qubit during the QCR operation. In our experiment, we use a transmon qubit with dispersive readout. The QCR is capacitively coupled to the qubit through its normal-metal island. We employ rapid, square-shaped QCR control voltage pulses with durations in the range of 2–350 ns and a variety of amplitudes to optimize the reset time and fidelity. Consequently, we reach a qubit ground-state probability of roughly 97% with 80-ns pulses starting from the first excited state. The qubit state probability is extracted from averaged readout signal, where the calibration is based on Rabi oscillations, thus not distinguishing the residual thermal population of the qubit.
In a quantum computation scheme, such as recycling a qubit, the initialization of the qubit is always required. At present, the initialization of the qubit is one of the bottlenecks in such computation, and high fidelity and fast initialization still remain important research subjects. In this study, by coupling a SINIS (superconductor–insulator–normal metal–insulator–superconductor) junction to a coupled system consisting of a qubit and a resonator, a photon is removed from the resonator by single-photon-assisted tunneling, and the effective relaxation rate of the resonator is increased. In addition, by applying an |e,0⟩−|f,0⟩ drive pulse and an |f,0⟩−|g,1⟩ drive pulse to the qubit, the energy of the qubit is rapidly transferred to the resonator to realize high-speed initialization. The present simulation shows that the qubit can be initialized with 99% fidelity in 80 ns and 99.9% in 137 ns when the electron temperature of the normal metal of the SINIS junction is 10 mK. The simulation also shows that the relaxation time of the qubit is about 13% longer when the resonator is interposed between the SINIS junction and the qubit than when the SINIS junction is directly coupled to the qubit.
Quantum technology promises revolutionizing applications in information processing, communications, sensing and modelling. However, efficient on-demand cooling of the functional quantum degrees of freedom remains challenging in many solid-state implementations, such as superconducting circuits. Here we demonstrate direct cooling of a superconducting resonator mode using voltage-controllable electron tunnelling in a nanoscale refrigerator. This result is revealed by a decreased electron temperature at a resonator-coupled probe resistor, even for an elevated electron temperature at the refrigerator. Our conclusions are verified by control experiments and by a good quantitative agreement between theory and experimental observations at various operation voltages and bath temperatures. In the future, we aim to remove spurious dissipation introduced by our refrigerator and to decrease the operational temperature. Such an ideal quantum-circuit refrigerator has potential applications in the initialization of quantum electric devices. In the superconducting quantum computer, for example, fast and accurate reset of the quantum memory is needed.
Quantum technology promises revolutionizing applications in information processing, communications, sensing and modelling.However, efficient on-demand cooling of the functional quantum degrees of freedom remains challenging in many solid-state implementations, such as superconducting circuits.Here we demonstrate direct cooling of a superconducting resonator mode using voltage-controllable electron tunnelling in a nanoscale refrigerator.This result is revealed by a decreased electron temperature at a resonator-coupled probe resistor, even for an elevated electron temperature at the refrigerator.Our conclusions are verified by control experiments and by a good quantitative agreement between theory and experimental observations at various operation voltages and bath temperatures.In the future, we aim to remove spurious dissipation introduced by our refrigerator and to decrease the operational temperature.Such an ideal quantum-circuit refrigerator has potential applications in the initialization of quantum electric devices.In the superconducting quantum computer, for example, fast and accurate reset of the quantum memory is needed.