Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2406.19752 · Nature Electronics

A travelling-wave parametric amplifier isolator

Arpit Ranadive, Bekim Fazliji, Gwenael Le Gal, Giulio Cappelli, Guilliam Butseraen, Edgar Bonet, Eric Eyraud, Sina Böhling, Luca Planat, A. Metelmann, Nicolas Roch

Published Nov 14, 2025• 24 citations
arXivHTMLPDF
DOI
10.1038/s41928-025-01489-w

Related papers

Peripheral circuits for ideal performance of a traveling-wave parametric amplifier

Hampus Renberg Nilsson, Daryoush Shiri, Robert Rehammar +2 more

We investigate the peripheral circuits required to enable ideal performance for a high-gain traveling-wave parametric amplifier (TWPA) based on three-wave mixing . By embedding the TWPA in a network of superconducting diplexers, hybrid couplers, and impedance matching networks, the amplifier can deliver a high stable gain with near-quantum-limited noise performance, with suppressed gain ripples, while eliminating the reflections of the signal, the idler and the pump as well as the transmission of all unwanted tones. We also demonstrate a configuration where the amplifier can isolate. We call this technique (WIF). The theory is supported by simulations that predict over 20 dB gain in the 4–8 GHz band with 10 dB isolation for a single amplifier and 30 dB isolation for two cascaded amplifiers. We demonstrate how the WIF-TWPAs can be used to construct controllable isolators with over 40 dB isolation over the full 4–8 GHz band. Finally, we look at nonidealities and show how certain nonidealities can be devastating for both the gain and the idler filtering, especially a cutoff imbalance or a flux imbalance, and discuss how to compensate for them. Published by the American Physical Society 2024

arXiv:2310.11909•Physical Review Applied•Jun 26, 2024•9 citations

A travelling-wave parametric amplifier and converter

M. Malnou, Benton Miller, J. A. Estrada +5 more

arXiv:2406.19476•Nature Electronics•Aug 26, 2025•24 citations

Traveling-Wave Parametric Amplifier with Passive Reverse Isolation

C. Kow, M. T. Bell

Traveling-wave parametric amplifiers (TWPAs) have attracted much attention for their broadband amplification and near-quantum-limited noise performance. TWPAs are nonreciprocal by nature providing gain for forward-propagating signals and transmission line losses for backward traveling waves. This intrinsic nonreciprocity is insufficient to protect sensitive quantum devices from backaction due to noise from warmer amplification stages in practical systems, and requires the use of bulky cryogenic isolators. We present a multistage TWPA (mTWPA) that addresses this limitation by achieving passive in-band reverse isolation alongside near-quantum-limited noise performance. The multistage architecture consists of two mode conversion stages and a reflectionless high-pass filter that provides the passive isolation. Experimental measurements of a prototype mTWPA demonstrated 20 dB of forward gain across a 1.6 GHz bandwidth and greater than 35 dB of reverse isolation. Noise measurements indicate performance at 1.7 times the quantum limit. This demonstrates that the increased complexity of a multistage TWPA design does not lead to significant added noise. The designed distribution of gain across the stages is engineered to minimize internal amplifier noise at the input, and we propose further optimization strategies in redistribution of the gain between the stages. This level of isolation mitigates noise from warmer amplification stages, matching the performance of conventional isolators. The passive reverse isolation of the mTWPA, allows for the amplifier to operate in pulsed mode where the amplifier is off during qubit gate operations and is turned on during readout allowing for an isolator free scalable readout architecture.

arXiv:2505.04059•Physical Review X•Feb 13, 2026•8 citations

A reversed Kerr traveling wave parametric amplifier

Arpit Ranadive, Martina Esposito, Luca Planat +5 more

•Nov 25, 2021•3 citations

Two-port directional parametric amplifier

Archana Kamal, Michel Devoret, John L. Clarke

Bulletin of the American Physical Society•Mar 17, 2010•0 citations

Deconstructing the Traveling Wave Parametric Amplifier

M. Malnou, José Aumentado

Traveling wave parametric amplifiers (TWPAs) play a prominent role in modern superconducting quantum computing efforts. They are valued for their relatively high power handling capability, bandwidth, and simple operation. However, the core mechanism for producing gain in these systems is based on very long nonlinear transmission lines that can be difficult to engineer for ideal behavior and require additional bulky passive components to adequately isolate quantum circuits. In this article, we describe our attempt to distill the core principle of traveling wave amplifier operation and discuss prospects for extending this approach to building much smaller discrete circuits that possess some of the advantageous properties of TWPAs, specifically directional gain with a simple pumping scheme.

IEEE Transactions on Microwave Theory and Techniques•Feb 27, 2024•6 citations
We investigate the peripheral circuits required to enable ideal performance for a high-gain traveling-wave parametric amplifier (TWPA) based on three-wave mixing . By embedding the TWPA in a network of superconducting diplexers, hybrid couplers, and impedance matching networks, the amplifier can deliver a high stable gain with near-quantum-limited noise performance, with suppressed gain ripples, while eliminating the reflections of the signal, the idler and the pump as well as the transmission of all unwanted tones. We also demonstrate a configuration where the amplifier can isolate. We call this technique (WIF). The theory is supported by simulations that predict over 20 dB gain in the 4–8 GHz band with 10 dB isolation for a single amplifier and 30 dB isolation for two cascaded amplifiers. We demonstrate how the WIF-TWPAs can be used to construct controllable isolators with over 40 dB isolation over the full 4–8 GHz band. Finally, we look at nonidealities and show how certain nonidealities can be devastating for both the gain and the idler filtering, especially a cutoff imbalance or a flux imbalance, and discuss how to compensate for them. Published by the American Physical Society 2024
Traveling-wave parametric amplifiers (TWPAs) have attracted much attention for their broadband amplification and near-quantum-limited noise performance. TWPAs are nonreciprocal by nature providing gain for forward-propagating signals and transmission line losses for backward traveling waves. This intrinsic nonreciprocity is insufficient to protect sensitive quantum devices from backaction due to noise from warmer amplification stages in practical systems, and requires the use of bulky cryogenic isolators. We present a multistage TWPA (mTWPA) that addresses this limitation by achieving passive in-band reverse isolation alongside near-quantum-limited noise performance. The multistage architecture consists of two mode conversion stages and a reflectionless high-pass filter that provides the passive isolation. Experimental measurements of a prototype mTWPA demonstrated 20 dB of forward gain across a 1.6 GHz bandwidth and greater than 35 dB of reverse isolation. Noise measurements indicate performance at 1.7 times the quantum limit. This demonstrates that the increased complexity of a multistage TWPA design does not lead to significant added noise. The designed distribution of gain across the stages is engineered to minimize internal amplifier noise at the input, and we propose further optimization strategies in redistribution of the gain between the stages. This level of isolation mitigates noise from warmer amplification stages, matching the performance of conventional isolators. The passive reverse isolation of the mTWPA, allows for the amplifier to operate in pulsed mode where the amplifier is off during qubit gate operations and is turned on during readout allowing for an isolator free scalable readout architecture.
Traveling wave parametric amplifiers (TWPAs) play a prominent role in modern superconducting quantum computing efforts. They are valued for their relatively high power handling capability, bandwidth, and simple operation. However, the core mechanism for producing gain in these systems is based on very long nonlinear transmission lines that can be difficult to engineer for ideal behavior and require additional bulky passive components to adequately isolate quantum circuits. In this article, we describe our attempt to distill the core principle of traveling wave amplifier operation and discuss prospects for extending this approach to building much smaller discrete circuits that possess some of the advantageous properties of TWPAs, specifically directional gain with a simple pumping scheme.