Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2406.19476 · Nature Electronics

A travelling-wave parametric amplifier and converter

M. Malnou, Benton Miller, J. A. Estrada, Kristen L. Genter, Katarina Cicak, John D. Teufel, José Aumentado, Florent Lecocq

Published Aug 26, 2025• 24 citations
arXivHTMLPDF
DOI
10.1038/s41928-025-01445-8

Related papers

A travelling-wave parametric amplifier isolator

Arpit Ranadive, Bekim Fazliji, Gwenael Le Gal +8 more

arXiv:2406.19752•Nature Electronics•Nov 14, 2025•24 citations

Nonlinear mechanisms in Al and Ti superconducting travelling-wave parametric amplifiers

Songyuan Zhao, S. Withington, Christopher N. Thomas

Abstract The underlying nonlinear mechanisms behind the operation of travelling-wave parametric amplifiers (TWPAs) are important in determining their performance in terms of added noise, maximum gain, and bandwidth. We describe a method of characterising the underlying nonlinearity of a superconducting material in terms of its dissipative-reactive ratio and the response time of the underlying microscopic processes. We describe and calculate the different behaviour arising from the equilibrium supercurrent nonlinearity, which has low dissipation and fast response time, and the non-equilibrium heating nonlinearity, which has high dissipation and slow response time. We have fabricated TWPAs based on Al and Ti, and characterised their nonlinearities using our analysis. For both Al and Ti, the measured dissipative-reactive ratios and response times are quantitatively similar to predictions for the non-equilibrium heating nonlinearity. We were able to obtain more than 20 d B of peak power gain, although only over a narrow bandwidth of a few kilohertz. Our method of characterising the underlying nonlinearities could also be useful in the understanding and design of other superconducting nonlinear devices such as parametric up-converters, kinetic inductance Fourier transform spectrometers, and resonator parametric amplifiers.

arXiv:2202.11656•Journal of Physics D Applied Physics•Jun 13, 2022•6 citations

Operation of Unshielded Kinetic-Inductance Traveling-Wave Parametric Amplifiers in Multi-Tesla Fields

C. Boutan, E. Lentz, Corwin Shiu +12 more

Cryogenic parametric amplifiers are used to amplify radio-frequency signals for a range of applications in basic and applied science. Both Josephson Parametric Amplifiers and Josephson Traveling-Wave Parametric Amplifiers have been used as first-stage amplifiers enabling readout chains operating within a few quanta of the quantum limit. However, these devices are highly sensitive to magnetic fields, having critical current suppressed by the Fraunhofer effect, requiring substantial field-free zones. In a dark matter axion search experiment, axions convert to detectable microwave photons in the presence of a strong magnetic field, necessitating amplifiers that can reliably operate close to these environments. Kinetic-inductance Traveling-Wave Parametric Amplifiers (KTWPAs) may be the ideal candidate for this type of application having high critical magnetic field of the materials used throughout their construction. In this letter we demonstrate that KTWPAs can provide high gain (>20dB) over a multi-GHz bandwidth in spite of from multiple exposures to multi-Tesla fields. Further, we explore operational characteristics of these devices under harsh conditions as a function of overall field strength, device orientation within the field, applied bias current, and pump power & frequency. In so doing, we find KTWPA gain vanishes in devices oriented perpendicularly to a field of 0.02T, but gain values >10dB are achievable in fields over 1T when oriented near~parallel to the device plane, with peak gain achieved with an applied 0.25T to 0.5T field. It is our expectation that KTWPAs will expand the accessibility of quantum-limited RF measurements in the presence of Tesla-scale fields.

arXiv:2608.25328•Aug 26, 2026•1 citation

A reversed Kerr traveling wave parametric amplifier

Arpit Ranadive, Martina Esposito, Luca Planat +5 more

•Nov 25, 2021•3 citations

Superinductor Based Traveling Wave Parametric Amplifier

Matthew Bell, Ana Samolov

Bulletin of the American Physical Society•Mar 3, 2015•0 citations

Preliminary characterisation of titanium nitride kinetic inductance travelling-wave parametric amplifiers

Joseph C. Longden, Christine Chaumont, Nikita S. Klimovich +3 more

Background Kinetic inductance travelling-wave parametric amplifiers (KITWPAs) have proven effective in achieving high gain over broad bandwidths whilst achieving near quantum-limited noise performance, properties which are extremely important for many ultra-sensitive experiments such as radio/millimetre/sub-millimetre astronomy, neutrino mass experiments, and axion dark matter searches, as well as commercial applications like quantum computational and communication systems. Methods This paper introduces the preliminary experimental exploration of an alternative KITWPA utilising thin titanium nitride (TiN) films as opposed to the conventionally used niobium titanium nitride (NbTiN) films. TiN films exhibit properties that could be advantageous for KITWPA operation, owing to its controllable critical temperature (T c) and physical robustness, hence KITWPAs fabricated from TiN films have the potential to replace NbTiN-based TWPAs for various applications, such as reducing the high pump power required to drive a NbTiN TWPA. Our TiN-based KITWPA devices were designed and fabricated with a 42 cm long coplanar waveguide transmission line patterned into a 100 nm thick TiN film, wound in a double spiral fashion to fit into a 2.2×2.2 cm chip. Results We successfully achieved broadband performance, with the best device displaying a peak averaged gain of ~5 dB with a bandwidth of ~3–13 GHz, making this one of the first broadband gain measurements of a TiN KITWPA reported in the literature. Despite this, the measured gain in all batches was lower than simulated due unexpected additional loss mechanisms. Conclusions The preliminary results presented here suggest that TiN films are suitable for KITWPA operation, although further investigation is required to improve the gain performance.

Open Research Europe•Apr 17, 2025•1 citation
Abstract The underlying nonlinear mechanisms behind the operation of travelling-wave parametric amplifiers (TWPAs) are important in determining their performance in terms of added noise, maximum gain, and bandwidth. We describe a method of characterising the underlying nonlinearity of a superconducting material in terms of its dissipative-reactive ratio and the response time of the underlying microscopic processes. We describe and calculate the different behaviour arising from the equilibrium supercurrent nonlinearity, which has low dissipation and fast response time, and the non-equilibrium heating nonlinearity, which has high dissipation and slow response time. We have fabricated TWPAs based on Al and Ti, and characterised their nonlinearities using our analysis. For both Al and Ti, the measured dissipative-reactive ratios and response times are quantitatively similar to predictions for the non-equilibrium heating nonlinearity. We were able to obtain more than 20 d B of peak power gain, although only over a narrow bandwidth of a few kilohertz. Our method of characterising the underlying nonlinearities could also be useful in the understanding and design of other superconducting nonlinear devices such as parametric up-converters, kinetic inductance Fourier transform spectrometers, and resonator parametric amplifiers.
Cryogenic parametric amplifiers are used to amplify radio-frequency signals for a range of applications in basic and applied science. Both Josephson Parametric Amplifiers and Josephson Traveling-Wave Parametric Amplifiers have been used as first-stage amplifiers enabling readout chains operating within a few quanta of the quantum limit. However, these devices are highly sensitive to magnetic fields, having critical current suppressed by the Fraunhofer effect, requiring substantial field-free zones. In a dark matter axion search experiment, axions convert to detectable microwave photons in the presence of a strong magnetic field, necessitating amplifiers that can reliably operate close to these environments. Kinetic-inductance Traveling-Wave Parametric Amplifiers (KTWPAs) may be the ideal candidate for this type of application having high critical magnetic field of the materials used throughout their construction. In this letter we demonstrate that KTWPAs can provide high gain (>20dB) over a multi-GHz bandwidth in spite of from multiple exposures to multi-Tesla fields. Further, we explore operational characteristics of these devices under harsh conditions as a function of overall field strength, device orientation within the field, applied bias current, and pump power & frequency. In so doing, we find KTWPA gain vanishes in devices oriented perpendicularly to a field of 0.02T, but gain values >10dB are achievable in fields over 1T when oriented near~parallel to the device plane, with peak gain achieved with an applied 0.25T to 0.5T field. It is our expectation that KTWPAs will expand the accessibility of quantum-limited RF measurements in the presence of Tesla-scale fields.
Background Kinetic inductance travelling-wave parametric amplifiers (KITWPAs) have proven effective in achieving high gain over broad bandwidths whilst achieving near quantum-limited noise performance, properties which are extremely important for many ultra-sensitive experiments such as radio/millimetre/sub-millimetre astronomy, neutrino mass experiments, and axion dark matter searches, as well as commercial applications like quantum computational and communication systems. Methods This paper introduces the preliminary experimental exploration of an alternative KITWPA utilising thin titanium nitride (TiN) films as opposed to the conventionally used niobium titanium nitride (NbTiN) films. TiN films exhibit properties that could be advantageous for KITWPA operation, owing to its controllable critical temperature (T c) and physical robustness, hence KITWPAs fabricated from TiN films have the potential to replace NbTiN-based TWPAs for various applications, such as reducing the high pump power required to drive a NbTiN TWPA. Our TiN-based KITWPA devices were designed and fabricated with a 42 cm long coplanar waveguide transmission line patterned into a 100 nm thick TiN film, wound in a double spiral fashion to fit into a 2.2×2.2 cm chip. Results We successfully achieved broadband performance, with the best device displaying a peak averaged gain of ~5 dB with a bandwidth of ~3–13 GHz, making this one of the first broadband gain measurements of a TiN KITWPA reported in the literature. Despite this, the measured gain in all batches was lower than simulated due unexpected additional loss mechanisms. Conclusions The preliminary results presented here suggest that TiN films are suitable for KITWPA operation, although further investigation is required to improve the gain performance.